Fischertechnik Kugelbahn ball tracks flexprofil 180, copy of 165231
See pictures, I guess PETG is better than PLA, but I would be happy for feedback…
- Downloads
- 95
- Likes
- 10
- Rating
- 0
Counting matching models…
See pictures, I guess PETG is better than PLA, but I would be happy for feedback…
Upper Hinge for Safety 1st Stair Gate - SecurTech Flat Step This is built-from-the-ground-up replacement for the hinge, top right, attached to the gate side, for the Safety 1st Stair Gate, the SecurTech Flat Step model. This is the…
Hi All! I discover that you very like my Bridgestone Potenza 6 style phone holder, so I designed also that Rest of models you can find on my profile:
Length - 213 mm Handle length - 140 mm Blade length - 50 mm Blade holder thickness - 5 mm Knife thickness - 17 mm Lock type - Back lock Print settings: Infill -100% Material - ABS plastic Layer height- 0.2 mm Print speed: 50 mm/s Screw…
Tire phone stand - basen on car tire - Bridgestone Potenza 6 As I can see you very like that, so I designed also pen and flower / cactus pot (you can find it on my profile)
Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options. https://www.thingiverse.com/thing:3313211 fischertechnik compatible…
Changelog/News: 2021-02-03: Added new variant "08 Gear rack drive (main body) v5_strongerprint" for easier removal of support structures 2019-02-24: Updated "11 Gripper arm" to v5, implementing these suggestions 2019-02-10: Peter (…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…
Foldable Karambit with locking mechanism. Print settings: Infill -100% Layer height- 0.2 mm For clean top layer turn on “ironing” M3, 14mm x 3 for spacer and blade lock M3, 12mm x 1 for blade holder Add 4 more washers on the cap head side…
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
(English version below) Erweiterbare Umkehrspindel basierend auf Vorarbeiten von Florian und Ideen von Florian, pinot und Stefan aus der ft:c . Zwei Endstücke mit beliebiger Anzahl von Mittelstücken. Die Endstücke alleine ergeben eine…
I was curious if I could print a fischertechnik compatible chain (module m1.5) using the print-in-place technique. I succeeded mostly, but not completely. Two versions are included: The "slim" chain is more similar to the original chains…
This is a mount for Ecotech Vortech MP40 and MP10 power supplies to be mounted on the wall to ensure if a tank leaks, the electronics will be protected. Printed in PETG.
Mount for the Ecotech Vortech MP10/40/60 aquarium pump controllers. Great for screwing or gluing to your tank stand to keep the controller and its wiring out of the way. Does the same thing as the factory mount but costs you pennies…
Changelog: 2018-09-25: (1) Corrected an error in Enclosure_grooved_v4.stl, the groove was 5mm short, now it is correctly 25mm. (2) I added a version of the enclosure parts and drilling aid for 4mm square brass rods, which are harder to…
Push fit MP10 Vortech guard/cover to protect your Nems. Designed from scratch due to losing an anemone from a guard that didn't also cover the face of the powerhead. For best results print face down using PETG, no supports etc required.
This is a remix of FingerTech's Twist Hub design, which they sell in aluminum. It has been modified to easily print without supports and be strong enough made out of PLA. This the for a 3mm D shaft and a 0.75" wide foam wheel. Uses the…
Karambit knife sheath break or chip? Need a replacement or additional sheath? Want a cool way to show off the blade of your karambit knife without the risk of damaging the blade? Well look no further! Because with a couple brain cells, no…
It's just a support for my airbrush compressor. It might fit to other compressor as its generic. Category: Art Tools
When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.
Changelog: 2020-02-19: I granted an exclusive permission to Peter Habermehl for selling prints of these stepper cases in his shop at www.mintronics.de . 2020-01-29: Improved top and bottom case parts according to my current design…
fischertechnik Gear Z20 for ZGB25RP and JGA25-370 DC motors with 4mm D-Axle Category: Robotics
I also designed Phone stand and pen organiser, which you can find on my profile
Remix of thing 39998326. Has the slide available for easy leveling on the wall. However when tightening the screws down they kept moving for me. I put a 4 pack of them together for my tank and you just have to level it and toss 2 screws…
The original fischertechnik Spannzange Z22 m0,5 (#35113) , so it can be printed in your own color. I've made a enlarged model Z28 to match the diameter of the end parts. Also added a model with a Z10 gear attached for direct drive, and a…
Basic fischertechnik stone for TTP223 Touch Switch Sensor. My color code is red for ‘normal’ touch behaviour, and black for the modules with solder-jumper ‘B’ closed (T-flipflop On/Off behaviour). I've made two models. One has the PCB in…
A more versatile alternative to the classic fischertechnik building block 15/Baustein 15 . This idea has been around for some while and others have realized it before . However there's no version on thingiverse yet, so here's my version.…
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based I2C module attached to their back. Buydisplay.com sell the EastRising ERC1602-4 LCD series with a chip-on-glass (COG)…
Simple and easy, the screw-less flared magwell gives you a much easier time reloading, while being very low profile and still removable. Print in PLA+ or stronger (Just make sure the material has some flex if you ever want to remove it)…
A print-in-place fish-eye / ball joint bearing rod end for fischertechnik 4 mm axles. Requires an original fischertechnik Spannzange Z22 m0,5 (#35113) for fastening. The maximum angle between the two axles is ca. 130° without fixing ca.…
This is a rack for Timbertech 30ml airbrush paint bottles, or any 35x35mm square paint bottle. The main rack holds 12 bottles and you can add more holders on top. There are 2 complements +8 and +4. The main rack can be printed without…
Enclosure for the ubiquitous 28BYJ-48 5V geared stepper motors for the fischertechnik construction toy system with a small footprint of 30x30x30 mm. Comes with several shaft adapters. The 28BYJ-48 is very cheap and surprisingly powerful…
A small off/on or pole-reversing switch for the fischertechnik construction toy system. Uses a 8x8 mm push-button switch found as a no name item on ebay , I assume it's a K8-8081D-L1 from Korean manufacturer HRO . The off/on version needs…
Update 11-04-2020: added Grundplatte_test_part.stl for testing and tuning of your print settings Update 03-04-2020: added two-sided versions ("Bauplatte") of both size plates. Update 19-03-2020: added half-sized 128x98 mm version, image…
Mount to hold two controllers Vortech/Vectra Pumps
I love Nestea's Steam Deck stand design for the Anker hub, so I decided to remix it to fit my StarTech hub, which is too thick to fit into the original design and has a unique shape. The StarTech hub model number is DKT30CSDHPD . There is…
Enclosure for TP223 mini touch sensor modules with a 5mm fischertechnik building block form factor. For assembly, simply solder a male or female 3 pin header in a horizontal position to the module and slide it into the enclosure's slot…
A variant of the S-Riegelstein 15x15 for the fischertechnik construction toy system with an additional groove at its back (S-Riegelbaustein 15). Inspired by an idea from this thread in the fischertechnik community. Please consider leaving…
Seitenplatten, um mit fischertechnik Seilrolle und Kranhaken eine vorbildgetreue Kranflasche zu bauen.
Two types of Z50 and Z60 cogwheels for use with fischertechnik. The cogs will mount with the regular nr 31014 or 31015 hubs to a 4mm axle. To make it easier to print without support, I also added the models with one flat, non-faceted…
The fischertechnik mini motor comes with a pinion and gear adapter . Unfortunately, the smaller Z11 gears of this adapter are prone to break sooner or later. Proper replacements can be ordered e.g. from the great fischerfriendsman.de…
Ein fischertechnik-Gehäuse für das abgebildete Sensor-Board mit Bosch BME280 Temperatur/Druck/Luftfeuchtigkeitssensor. Montage durch Snap-in-Deckel, der auch die Platine in Position hält. Keine Schrauben. 4-adriges Flachbandkabel, direkt…
Turn PET soda bottles or Sigg water bottles into air tanks for fischertechnik pneumatic applications. Both kinds of bottles are suited for compressed air up to at least 1 bar, the Sigg metal bottles are perfect for vacuums. The PET…
My earlier attempt did not fully realize the potential of a 45° angular block, as it did not stay within the fischertechnik 15mm grid. This design picks up several suggestions by Thomas (geometer) in this ftc-thread . There are STLs for…
Five additional grippers for the fischertechnik mini servo system https://www.thingiverse.com/thing:2807112 designed by juh Category: Construction Toys
Beams for the fischertechnik construction toy system. Just in case you'd need an aluminum beam from 30 to 210 mm length, and you don't have one at hand, just print it yourself. Example printed with "DasFilament silber" PLA Printing tips:…
fischertechnik Gear 10 for ZGB25RP and JGA25-370 motors Category: Robotics
Reworked to be much stronger. Did you lose the cap that holds your WeatherTech™ car mats? I sent the Dipper-Mobile out for detailed cleaning, and they lost one of the two caps that secure the mat to the floor on the driver's side. So I…
Ein Drehkranz für größere fischertechnik-Modelle. Die Anbauflächen haben 130mm Durchmesser, der DK ist 20mm dick, die Verzahnung hat 90 Zähne, der Gesamt-Durchmesser am Zahnkranz beträgt 138mm. Die Mittelbohrung ist für die Aufnahme eines…
Z22 cogwheel for fischertechnik. The teeth are already tapered to be used with the fischertechnik chains, but be sure to make them smooth (sandpaper), especially the side that was on the printer bed, if you print these with support. This…
A ball wheel (caster wheel) block for the fischertechnik construction toy system. Needs a steel ball as included in the fischertechnik marble run line with a diameter of 12.66mm. The ball wheel block is meant to be used in turtle like…
You can easily print it without my brand just by using one color for first surface as difference between bottom surfaces is 0,001mm co it you will not paint it, slicer will print it as one body Have fun petrolheads! To have best results,…
Some parts to integrate fischertechnik construction toy and Gravitrax marble run. The base plates are best printed upside down, as supplied. The ft-to-Gravitrax parts (Hoehenstein_auf_ft.stl and Bahnstein_auf_ft.stl) should be rotated…
Ein paar Bausteine, um an fischertechnik Modellen im 15mm Raster Kabelinstallationen verlegen zu können.
My first upload. This may prove useful to other people :) Adaptor to fit a Xcortech XT301 tracer unit onto a Raven Hi-Capa 5.1 GBB airsoft pistol. Other pistols with a 12mm CCW female thread may also fit. The screws, LED and push button…
This is a modification based on the Lian Li Additional I/O Kit that allows the Startech USB 3.0 Internal Multi-Card Reader to be added to the Lian Li O11 Dynamic EVO case. Remove the metal shell from the Startech card reader and install…
A case for the cute LILYGO T-Display-S3 ESP32 module with its ultra fast and sharp TFT display (without touch version), with compatible connectors for fischertechnik. Two I2C connectors at the back need a 2x9 strip of perfboard and two…
Update 2021-01-22: Outdated, an improved version is here . The fischertechnik construction toy system has angular blocks with 7,5°, 15°, 30° and 60°. This is the missing 45° angular block. Connecting eight of them in a circular…
Il s'agit du support de fixation du protège-disque de la marque Rtech, que j'ai développé pour une KTM EXC de 2003. Il est possible de le monter sur d'autres modèles. Envoyez-moi un message pour me faire part des modèles que vous avez…
The fischertechnik construction toy system has bow-shaped beams (Bogenstücke) with 60° and 30° as part of their statics line. Combined with the flat girder part (Flachträger) you can construct circular structures with a diameter of 22,9…
Depending on the gear ratio, the length of your motor will vary, see dimension drawing. That's why I included versions for different reducer lengths. Needs two M3 screws to fasten. If you have a motor without encoder, have a look at…
A variant of the standard fischertechnik connector with two flat sides in three versions with 15mm, 30mm, or 45mm. It is meant for situations when the ft spring cam (Federnocke) will not provide enough stability. Please consider leaving a…
Needed a way to hold some of these things on the underside of my desk so designed these. I used drywall screws to mount to bottom (as I do for most things). I'm sure these will only fit the exact ones I have here but still worth your time…
These cheap LED&KEY modules are all over ebay and aliexpress. The TM1638 chip uses a non-bus serial protocol. I made them into an I2C target (slave) device by adding an ATtiny85 which runs my I2Cwrapper firmware with the TM1638liteI2C…
I designed this mousepad mount to easily attach to my Monstertech frame, making my mouse accessible during VR flight sims. It mounts using two M8 30mm bolts and the self-aligning T-nuts from Monstertech. You can find the T-nuts here and…
Needed to have 3rd mfd in my rig. This is mounted with same hardware than other things in Monstertech alu-rig. 8.5mm hole spacing is 40mm. There is also washers included in case you too have too long screws. Mfd is mounted with…
Simple casing for Arduino Mega Pro Mini . I designed this when I needed a case to be used with the fischertechnik construction system when I experimented with the small LED traffic lights. For a more detailed description, see the project…
fischertechnik Gear Z20 and Z60 for metal flange coupling. Depending on the inner diameter of the flange coupling, these can be used on 4mm axis DC motors (e.g. ZGB25RP and JGA25-370) or 5mm axis DC motors (e.g. Nema stepper motors)…
In case you got this combo and dont want to use native solutions for mounting this thing, here is an adapter I'v put together while waiting for the collective preorder to arrive. There are multiple ways to mount this thing, but the one…
The post skirt is a 2 piece design to allow replacement of original 1 piece Timbertech post skirts that are cracked or missing without dismantling the railing or support post. The inside and outside profile closely matches the original.…
This model is a replacement for the Fischertechnik Statikstein 36973. This element appears to be used primarily in the Fischertechnik Dynamic marble runs / Kugelbahn and one I got used had most of them missing, so I designed this…
Mount for Thrustmaster MFD Cougar with Monstertech Table Mount or similar. Print Settings Printer: JGAurora a5x Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: NoName PLA Gray Category: Games
Un soporte creado para tener almacenadas 12 botes de pintura de la marca Timbertech y tenerlo todo organizado.
A fischertechnik compatible case for the shown Distance Sensor Breakout GY-VL53L0XV2V Category: Construction Toys
Everytime i want test the FPS of my airsoft replica the bbs fly thru my office. Thats the reason i created this simple but effictive box. it fits snug around the Xcortech X3200 MK3 and with a bit of old fabric the bbs are catched. No more…
t's just a support for my airbrush compressor. It might fit to other compressor as its generic. It fits perfectly (i think) for the "NEO for IWATA" airbrush. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
This remix adds shafts in places where moving parts rotate. This change makes it easer to screw full model together becouse you don't need to leave space for parts to move. The orange outline on picture is 0.1mm higher and lower than the…
An update to an earlier design with a proper ft/ftduino-compatible 6-pin connector. There' at least two versions of these things available, that's why there is a short and a long version of the top part. If you are interested in making…
Small boxes for compartmentalizing fischertechnik storage boxes. Designed for the standard fischertechnik storage system boxes ( Sortierwanne ). For compartments of 1, 2, or 3 rows and lengths of 1/4 (x 25), 1/3 (x 33), 1/2 (x 50), 2/3 (x…
Update 2020-04-21: I made a better 16x2 I2C display here: https://www.thingiverse.com/thing:4301853 Changelog: 2018-10-30: added standalone version without fischertechnik connectors; changed name accordingly A simple enclosure for this…
Just for fun as we had 01.04.2025 I designed this s**t: https://youtu.be/uxzdwB36h9E
Originally designed for a Startech.com 6U wall mount server rack. But should work with their entire line of wall mount server rack products. It's a two piece design. You can installed the CAT 6 terminated or unterminated it doesn't…
I needed a support for my 7.1 Audio sound card in my virtual pinball. I could not find one so I made that version.
A working Rzeppa constant velocity joint with only 15 mm diameter and connectors for fischertechnik 4 mm clip axles (Rastachsen). Needs six 3 mm steel balls, I got mine from aliexpress. For postprocessing you'll need a 3 mm drill, a 3 mm…
Bought a RTech Tidy Tail for my Beta RR-S, forgot to add the license plate holder with it. I watched a video about how their license plate holder and their integra system was working, which look interesting, so I decided to do something…
This is a case for the MPU6050 GY521 gyroscope/accelerometer module with fischertechnik connectors. The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A…
Probably like many of you, i bought the Timbertech airbrush compressor kit to start painting my 3d printed model. and therefore the next step was to buy paint so i bough 2 separated Timbertech acrylic paint kit of 12 30ml bottle each so…
An enclosure for the cute little 128x32 monochrome OLED I2C displays with connectors for the fischertechnik construction toy system with a lean size of 45x15x7,5mm. The I2C connectors are labeled SD A SC L** 5 V G**ND. The bottom part…
Abdeckplatte für ft-Rollenlager zum Bau von Kabelkanälen. Ein passendes Eckstück (17mm hoch, gleiche Höhe wie Rollenlager + Abdeckplatte) ist auch dabei.
Ein neuer Baustein für das fischertechnik-Baukastensystem.
The fischertechnik construction toy system has bow-shaped beams (Bogenstücke) with 60° and 30° as part of their statics line. Combined with the flat girder part (Flachträger) you can construct circular structures with a diameter of 22,9…
Planetengetriebe für fischertechnik. Die Trägerscheibe nimmt 3 Planeten auf. Diese sind in je einem Drehteller gelagert, so dass der Abstand zur Sonne variabel ist. Die Planeten haben modul 1. Zur Verwendung mit der Hohlwelle 10 mm,…
Not much to say Category: Construction Toys
I really liked the look of Majestyk2k's SteamDock but I already had several hub's in a different form factor. This model is a remix of https://www.thingiverse.com/thing:5422982 You will need either a 90 or 180 (u shaped) USB adapter. I…
The title says it all. Inspired by an idea from this thread in the fischertechnik community. Please consider leaving a "like" or posting your make as a token of appreciation for my work. Find my other fischertechnik designs here . Print…
OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…
fischertechnik 4mm Shaft Adaptor for ZGB25RP and JGA25-370 motors. The inner diameter of the shaft adapter is 4.25 mm. Try to print with highest resolution for best fit. Category: Robotics
Modified existing Gladiator baseplate to fit Monstertech table mount kit. The print mounts using the hardware supplied with the Monstertech Kit. Printed with eSun PLA-HS at a 0.2 layer height, 4 walls, 4 top and bottom layers, 15% infill…
Various models to print the cases and lids of the remakes of the traditional fischertechnik electronic modules ‘Silberlingen’. ADDED 24-09-2025: case-strip-hills-toppcb-3mm.stl and case-strip-hills-toppcb-1mm that also contain the little…