814 models
Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually within 24hrs. You can contact me thru private…
Print approx. €9.59–€11.72 excl. taxPreliminary estimate for one variant
Wile E. Coyote and the Road Runner
Print approx. €21.47–€26.24 excl. taxPreliminary estimate for one variant
This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for one variant
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
That is a perfect little box to let the Strawberry Runner grow some roots and easly plant them afterwards. it is a remix from Nigel Johnson and i fixed the screws holes for v3 and also added a dirt version, as i needed that.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
Toyota 4Runner 4x4 Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
I used PETG as I'm hoping it will better survive distortion from summer temperatures, but I also tried PLA and the part is more than strong enough for the possible abuse it will get from my dog. Printed on edge (cable cutout down) using a…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
This case is used to store Bauer Hockey Skates runners. It can also be used for other models of runners like CCM, although True's runners won't fit. Checkout my other models for the TRUE model.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Ikea part 149842 This (just) fits on an Prusa MK3S bed (when you find the right angle).
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
printed in PETG & TPU not 100% Watertight but it has a decent fit i uploaded the f3d file so if you edit it to be watertight may share a remix of this :)
Print approx. €5.78–€7.06 excl. taxPreliminary estimate for PETGSource material: PET
I designed this box to transplant strawberries from the mother plant growing outdoor in the garden into a grow cube of Rockwool for relocation indoors to my hydroponics NFT system. The box fits a 1" x 1" Rockwool cube (can be used with…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
I have a Toyota 4Runner. In the rear cargo area, there is a roll up cargo cover to hide stuff in the back. The handle to that broke (cracked)…. so I designed this replacement. Additional Parts to install: 4 bolts + Locknuts. Note: I…
Print approx. €6.20–€7.58 excl. taxPreliminary estimate for one variant
I took phiba's radio mic mount, and merged it with a switch model by 1DDesign. I wanted to put a mic holder into the dash to replace a blank switch. I added some supports to the switch in all corners, and connected them together with a…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Pre-runner/trophy truck wall art. This is a larger print than my others so scale as you like.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
100x160mm sign, advertising the ACME Lady Road Runner Outfit. Accept no imitations! Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…
Extra poses: climb archer Spok bull telephone / easy grip trigger finger drill Please check out my other creations: https://www.printables.com/@RadekPilat/models
Road Runner, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. Road Runner, also known as Beep Beep, speaks only with a signature "beep beep" (sometimes misheard as "meep-meep")…
After realizing how much easier it was to print the 13 family of prints with runners, I decided to make a runner for the Lucky 13 since I had struggled to get that print to stick (which resulted in some interestingly misshapen ball joints…
THANK YOU ALL FOR 1700+ DOWNLOADS! I never thought this would get this much attention let alone that many downloads. 2023 has been a turbulent year for me, I started 3D printing, moved far away from my hometown and had many troubles to…
I really like the Dummies-13 on runners, for gifts - but why only the masculine version ? So I remixed the plates to replace the “masculine” parts by “feminine” ones. It's called Duffy-13, the double F being the mirror of the double M for…
I include the STEP file in case you wanna modify them. This runner holder should fit most model kit runner.
Remix of the great runner shelf by jay, remixed it to have the gunpla logo on the back.
Update 12.08.2024 I added version with colors on layers. Overview Roadrunner powered by the wind. Assembly every part as on photo. Use superglue (cyanoacrylate glue) to hold everything together. Mount the stick and place it sideways to…
Fit runner size of 2.0, 2.5, and 3.0 mm.
This is probably a gamble for both of us, here. You might end up wasting your filament, I might end up wasting my time. I'm not 100% that this runner will work, and I'm really only praying that it does. This is another reminder that I…
Originally designed by Frank Lloyd Wright for the Ennis house built in Los Angeles, 1924. This house was one of a handful of “textile block” projects created by Wright, a system of interlocking concrete blocks with bold patterns that…
Traveling friend needed a cup insert fix for her vehicle. I found two designs available online but each of them had problems with fitting and features. One design had rounded inserts for the cup holder, my friend's 4th gen had a rounded…
💻Ethernet Cable Runners💻 Nozzle 0.4mm Print 0.2mm Infill 50% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→ ALL COLLECTIONS info: 👤Account link to share it= idea-prints…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 This time I take a different approach to printing the difficult frame parts and use runners not to connect different…
Road runner sculpted on Zbrush Category: Creatures
This is a new design and differnt than my old design. This will fit most of the runner with all the weird nips on some runner.
I enjoyed the Articulated Spider by @soozafone but struggled with bed adhesion on the frame, joints, etc. This runner includes the fiddly-bits but you will still need the following from the original files: Carapace Eyes Abdomen
1:8 Scale tandem axle trailer for Glade Runner Glade Runner model here- https://www.printables.com/model/551978-glade-runner-rc-airboat-18-scale-by-black-crow…
Hey chooms! What’s going on? Everything Nova? I heard you´re David´s fan. If you wanna join Maine´s crew you should definitely print this preem logo, unlike that gonk, newbie from Wakako…ehh. Anyway here, have a drink! See you around then…
The Road Runner Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Small Cargo ship similar to famous 3DBenchy. Modelled in Blender. No Supports needed. Note: Preview images are rendered in Cycles Blender.
My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the…
The OG files, all I did was add the runners for ease of printing.
This throttle wraps around the Rad Runner's rotating throttle and is secured in place with an M3 screw. There are ridges to help the band bite into the rubber throttle, but you can add rubber pads or a strip of neoprene or dip the band in…
Opened up Shapr3d to design a mech and this is what I end up making. \_(ツ)_/ UNRELATED NOTE: When I was a child, I remember being absolutely enthralled by watching Bugs Bunny, Daffy Duck, Wile E Coyote etc conjure items out of thin air.…
MAZE RUNNER inspired LED 16x16 matrix clock with 256 NeoPixel LEDs Features: 16x16 matrix clock that you cannot read directly without knowing where you have to look. Some people i showed it had a really hard time to see it and some gave…
I got paranoid double, triple and quadruple checking belts everytime I had to cut a pair for a corexy gantry, so I created this to make it a quicker job. This tool operates similar to a clothes zipper using the meshing of the teeth on the…
These mounts allow the replacement of the stock dash speakers with 3.5" aftermarket speakers. I designed these around the Infinity Reference REF-3022cfx 3.5" speaker - compare your speaker specs to these to see if the mount might work for…
Tired of my gunpla runners tipping over on a light and flimsy stand. Made one of my own with a heavy base and some lean. 15 slots, with 10mm gaps. Will fit most HG kits, unless it is a nightingale/ xi. Will probably need 2/3 bases for RG…
MMU version of Road Runner Road Runner, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. The model, as presented is 75mm tall. This MMU model was derived from my non-MMU model…
Printable drawer for bottom cubby in 5th-Gen 4Runner center console. Supports recommended for the pull handle only Recommend adhesive-backed felt on the bottom and rear corners for best fit. RAM ball variant available here:…
Coyote says that the other one is said to be missing... so here is the Roadrunner ;) You can easily scale the print file, but make sure that the height remains at 3mm. There are two bed in the project - right/left corner version. The bed…
Body of a Yota Pre-Runner, Sized to fit 1/24 and 1/10
All files are uploaded in .3mf formats only. You can get separate the individual bodies as needed from this file. Source files are not available due to IP theft prevention. You can request modifications in the comments if necessary. All…
This Remix adds runners to the frame and armor plates of the K9 DUMMY13 COMPANION which is itself a remix of Dummy13 by soozafone. Some Exacto work might be needed on the Armor print Print Settings: 100% scale, 0.4mm nozzle Material Frame…
For those of us with a 5th generation 4Runner, you know that little cubby space by the shifter is not very useful, because stuff flies out. I made a little cubby drawer that will fit in that space, that is held in place by friction. This…
Meet Freerunner. Like the summary says, it's a half-dart, micro-wheel, mag-in-front, battery-in-grip, semiauto manual pusher, 80-175fps pistol-format blaster. I like to think it's pretty good. Pretty quick to print (10.5hr of print time…
Blade Runner Deckard's Side Arm
Gunpla Runner Shelf. If you have gunpla hobby. This thing is very useful. (I think..) 180X196X130 Size. (Almost fit MG Runner Size) You need to print Gunpla Shelf Rev1 X 1EA Stand Part X 2EA
I designed this Ikea Trofast rail, runner, slider or whatever you want to call it. I couldnt find the right design here so I made one myself. There are 2 versions, one for the normal size Trofast (42x30 cm) and for the smaller one (20x30…
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
I created tokens for Android Netrunner that I modeled after these tokens from Null Signal games. https://nullsignal.games/blog/official-nsg-netrunner-tokens/ All the tokens are double sided. my printer can’t do multicolor prints, so I…
Introduction If Freerunner was so cool, how come they never made a Freerunner 2?! Well here it is. Now it's more aesthetically pleasing, shorter overall, with an all-new grip, and a shorter trigger pull for faster firing. Still capable of…
A set of tracks and interactive parts to create your own marble run/marble machine! The tracks can be printed as needed and rearranged into different layouts. The tracks are designed for small print volumes in mind (also because my…
Customizable miter slot runner generator. This is useful for making custom table saw and router table jigs. Variables include length, number of holes, nut or countersink screw holes, optional t-groove. Example print settings: Elegoo…
Small scale Pelton turbine designed and used for a school project. It attaches to a generator to generate some current. It is intended as a proof of concept for a fun and introductory science and engineering project. It requires bearings…
Updated on 11/12/2018 WIP stands made by danielgeez that look realy nice to display this model. (Thanks Daniel!) https://www.thingiverse.com/thing:3272738 Updated on 13/11/2018 - Faulty Part FIXED "Spring System" part now fixed. Guide…
Since the impeller and the driver are very likely to be defective on this model, I have designed a spare part here.
Update Additional model for 16.4mm - 17.5mm grooves (fits Bosch GTS X10). (In case your groove is only marginally smaller, i suggest to manually grind it off) Idea Above the final miter runner the cross cut sled will be placed which will…
Made specifically to fit Ryobi 10" table saw miter slot, but should fit any miter slot 11/16 or smaller
Replacement watch band loop for the Garmin Forerunner 245. Tested and feels most comfortable printed in TPU. Print with supports. Print with supports.
Sylvanas Windrunner from Warcraft rumble, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
Runner for the ‘t-track’ of an Evolution Rage 5-S table saw. Can be used as the base for mitre jigs, sleds etc. Two versions provided - 7.5mm sits just above the bed, 7mm just below depending on the need. Evolution tools are not known for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A friend of mine has a problem that the metallic connectors on the charging port gives her rashes. She is very sensitive to earrings and jewelries as well. To allow her to wear her watch all day i created a small cap to cover the charging…
Replacement pulls to release the rear seatbacks.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A simple cyberpunk edgerunner keychain
Here's my version of Kewi's mask/ cybergear thingy from the Edgerunners anime. Not sure how well it fits, used a 3d scan of my head, and it seems to work with it, but you may need to change it for your head. Be sure to post a make and…
Wile E. Coyote and Road Runner Wall Art
2 Ülatten schicht 0,2 10h17min 188,37 g mit dem P1S
This is a remix of Andrew Gipson 's Alouttinae/Atelidae, so if you love the design and want to support, check him out! Also, due to having too many files, I moved the Backpack and 4-Arm Addons over here ! To make printing a little easier…
When I print with external perimeters first, the seam is more noticeable. So I set object modifiers on all of the pieces to print with one perimeter on the first layer, and added some light runners for better adhesion on some parts that…
Hi I needed a Miter bar to fit my saw and router table. Something i can keep a bunch of them in the drawer and make a new jig / sled within seconds. so they connect like legos . also wanted the option for drop in bars and enclosed bars. I…
Size: 25 cm in height and 16 cm in width - Max size on MK4 Printed in 0.10 mm It can be difficult to print because some of the elements are thin. I recommend good quality filament
This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…
Its a stand/charging dock for Garmin Forerunner 255 :) If u find some error please comment!
I needed to make a new crosscut sled and thought I’d print the miter slot runners for my SawStop PCS. My printer’s bed didn’t allow for the length I wanted so I had to print it in multiple parts. I made a long and short version so you can…
I love @RadekPilat's Dummy 13 Hand megapack, but was frustrated that it would tie up my larger printer, because I couldn't fit the 150% version on my 180x180 Bambu A1 Mini, so with a bit of re-arranging, now the entire megapack fits…
3d model I made of the Sandevistan from Edgerunners for my David Martinez cosplay at this year's Halloween party. The design was based off one particular frame, it's not exactly prop quality, but I couldn't find any free models online, so…
Toyota 4runner gen 5 cubby drawer
There are two versions of the model. One is just a blank for the center console. The other is for a flush mount USB port. Models are set in the correct printing orientation. The clips do not need supports. For the USB model use the in…
They are designed to print without support. Enjoy, Have fun!
Update: Fixed slope on top of cup holder to better print upside down; the original model has stringing around the inner rim due to the gradual slope. Original model is great, but needs to be larger to fit. The model in this post is 101%…
Deckard Type - Blade Runner 1982 - BIC Lighter Sleeve Cover - Cover accendino BIC This a Blade Runner 1982 style 3D printable Bic lighter sleeve Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed…
a stand for your model kit runners, I use it after priming or painting the whole runner Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Category: Tool Holders & Boxes
Runners for my table saw Dewalt Dw745. Measured after the miter gauge that came with the saw. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Post-Printing Category: Machine Tools
Preamble Applications to Rebeccas Headband from the series “Cyberpunk Edgerunners” i made per the suggestion of a friend. I didn't add a headband or any type of fixture, cause headbands can vary depending on the cosplayer (to each their…
Lucy Edgerunners 1:7 scale (cca 25cm). Needed: 4pcs 5x2mm magnets glue Primer spray paint Acryl colors- color pallete for mixing colors is downloadable in files Brushes transparent spray paint sand paper 220 Figure has 3 pieces and stand…
A simple set of L shaped brackets to act as drawer runners for your systainers (tested and pictured with T-Loc type). Print a front right, and a front left piece (they have a tiny lip to act as a stop), plus two identical rear halves of…
