Search results: s23

Sort order

164 models

P
Printablesfoorschtbar

BeamerControl - RS232-MQTT/API-Bridge to control a projector

A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
11
Rating
0
P
PrintablesChronoT52

Samsung Galaxy S23 Ultra Dock with SmartThings Station Holder

I wanted an upright stand that held the SmartThings wireless charging station that came with my S23 Ultra. It's rough around the edges, and I'm certainly not an experienced 3D modeler, but this will charge even with the SView case on the…

Print approx. €8.45–€10.33 excl. taxPreliminary estimate for one variant

Downloads
176
Likes
20
Rating
0
P
PrintablesMuadDib

Samsung S23 Ultra Case with low poly Fox decoration

The case and the decoration need to be printed separately. The Fox decoration needs to be printed with a color change to get the effect. Place the decoration inside the case like on the photo.

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
8
Rating
0
P
PrintablesDeluxeBabble

Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23)

Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover. To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight. The flashlight is…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
13
Rating
0
P
Printablesdziobu

Samsung S23 Ultra phone case

Simple case for S23. Project made for TPU; print with supports.

Downloads
1,525
Likes
109
Rating
4.33
P
PrintablesJsR

Samsung Galaxy S23 Ultra cover PETG and TPU models

Updated model Edit 4.2.2025 Added PETG model That can use also camera cover thath can be seen in gallery. I printed mine without any solid top-, bottom layer and perimereters. Just printed 3d honeycomb with 50% infill. It is very…

Downloads
1,491
Likes
115
Rating
4.75
P
Printablessabin

Samsung Galaxy S23 rugged phone case

Samsung Galaxy S23 rugged phone case - to be printed with TPU, with 0.6mm nozzle.

Downloads
1,478
Likes
80
Rating
4.57
P
Printablesaddigreen

Samsung Galaxy S23 TPU Slim Case

Designed with air pockets around the edges to better withstand falling to the floor. When printed with the right TPU A95 material, this case is very durable and will outlast your phone.

Downloads
1,473
Likes
86
Rating
5
P
PrintablesWick3D

Samsung S23 Ultra - Two Part Case

Snaps together perfectly on my printer (Might need to scale on a budget printer)

Downloads
1,000
Likes
109
Rating
3
P
PrintablesZiemniaczenka

Samsung Galaxy S23 hard case

Updates: Added squiggly pattern Added fuzzy skin modifier for better grip Currently it doesn't work in Bambu slicer, it leaves gaps in the model. Use Orca slicer 2.2 or PrusaSlicer 2.9.0 alpha (or above) to apply it (read more here )…

Downloads
925
Likes
75
Rating
5
P
PrintablesLindh3D

Samsung S23 + Case (super thin)

My own designed case for my Samsung S23 + Only 0.6 mm thick and only 12g of plastic. If you have a multimaterial printer you can add your own logos or text. Standard files are with no logo or text. Go ahead and add your own text or logo…

Downloads
888
Likes
74
Rating
4
P
PrintablesMotani_Works

Samsung Galaxy S23 Ultra Phone Model

Samsung Galaxy S23 Ultra phone model detailed with s pen.

Downloads
755
Likes
47
Rating
0
P
PrintablesJohan Fuhri

Samsung Galaxy S23FE Protective Case

I couldn't find a decent protective case for my S23FE, so I made this one in Fusion360. Mine is printed in SBS filament (from FilX), but any of the less flexible materials (PLA, PETG) should work. Supports are required for the area…

Downloads
731
Likes
22
Rating
5
P
PrintablesMontaero

Samsung Galaxy S23 Slim Case

Simple phone case for the Samsung Galaxy S23. This is my first model in Printables so any and all feedback is welcome!

Downloads
692
Likes
54
Rating
4.83
P
PrintablesNewGAME81

S23 Phone Case

Phone Case for the Samsung Galaxy S23

Downloads
650
Likes
34
Rating
5
P
PrintablesJOGIAREA

Wandmontage Bosch E-Bike Lader 36-2 BCS230 / Wallmount Bosch E-Bike Charger 36-2 BCS230

Wandhalterung für Bosch E-Bike Ladegerät 36-2 BCS230 Befestigung mittels 5 Senkkopfschrauben. Weitere Ideen besuchen Sie: www.jogiarea.de Wall mount for Bosch e-bike charger 36-2 BCS230 mounting by means of 5 countersunk screws. For more…

Downloads
576
Likes
55
Rating
4.88
P
PrintablesNoxispike

Car phone holder with USB for Samsung S23 Ultra

Compatible phone/case/cable: Phone : Samsung S23 Ultra Case : Spigen Tough Armor Cable : PZOZ magnetic USB The phone is pretty large and heavy. It's definitely possible to print the model out as is and add padding on the holder's sides to…

Downloads
532
Likes
150
Rating
5
P
PrintablesEsketit 02

Cover Samsung s23+ / s23 plus

A cover for Samsung S23+ It's made to be printed in TPU I suggest to print it with 15-20% rectilinear infill and 3 layer walls, 3 layer for the bottom surface and 5 for the upper surface.

Downloads
461
Likes
22
Rating
5
P
PrintablesMario Sta

Samsung Galaxy S23 Ultra holder

Samsung Galaxy S23 Ultra Halterung PLA 15% Füllung Mit Support

Downloads
452
Likes
46
Rating
5
P
PrintablesJohan Fuhri

Protective Case (TPU) for the Samsung Galaxy S23FE

I made this protective case for a Samsung Galaxy S23FE, specifically to be printed in a flexible filament like TPU. Supports are required for bridging areas. STEP file is also included for those who wish to remix or customize. If you are…

Downloads
428
Likes
21
Rating
4.75
P
PrintablesLeathercraftV

Samsung S23 Dummy model

Regular Samsung S23 dummy models created based on physical measuements. Model with lenses - SamsungS23dummy Model with lenses inserted (ideal for case creation ) - SamsungS23dummyWithoutLenses Printable without supports

Downloads
376
Likes
22
Rating
5
P
Printablesgoju

Wall mount for Bosch ebike Battery Charger 36-2 BCS230

Compact wall mount for Bosch ebike battery charger 36-2 BCS230 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer…

Downloads
361
Likes
30
Rating
5
P
PrintablesNon Jesus

Samsung Galaxy S23 Ultra Model

Samsung Galaxy S23 Ultra

Downloads
293
Likes
16
Rating
0
P
Printablesglmagalhaes

Samsung S23 Ultra Standby Mode Dock

Modified the dock from Scott Yu-Jan to fit the Samsung S23 Ultra. It was designed with a cover and the charger size was modified to fit the Simple Mini 3 from Baseus. It also has the fusion 360 files in case you need to change something…

Downloads
265
Likes
53
Rating
5
P
PrintablesPresswerk65

Case for NodeMCU ESP8266 V3 + RS232 to TTL Breakout Board

The lid snaps in, just screws for mounting the electronics required

Downloads
256
Likes
20
Rating
0
P
PrintablesGomezLZ

Galaxy S23 FE Phone Case

Print in TPU. To get the pattern on my phone case, I just changed the horizontal shell layers of the top and bottom to zero and chose my favorite infill pattern.

Downloads
247
Likes
12
Rating
0
P
PrintablesDenitz

Samsung Galaxy S23 Card Case

I remixed the model by Montaero to fit a credit card inside the case. The case is about a credit cards thickness thicker to fit the card inside. I use it for my gym card but you should be able to use any credit sized card, or even some…

Downloads
225
Likes
12
Rating
5
P
PrintablesDanglezz

S23 Ultra Case with one card slot

s23 ultra case with a card slot. Use Petg. The gengar / Cheshire cat smile I added as well but can understand if it's not aesthetic for some.

Downloads
217
Likes
23
Rating
5
P
PrintablesPrintmalox

S23 TPU Case & Bumper | maloxshield

The classical case with backside has easier function of the buttons, but personally I like the bumper version more. The case prints around 3h and the bumper 2h. Bei der normalen Hülle funktionieren die Knöpfe etwas besser, aber die Bumper…

Downloads
217
Likes
16
Rating
5
P
Printablessyrovatskey

Samsung Galaxy S23/Galaxy S24/Galaxy S25 Phone Charger Stand

upd: untested for Galaxy S25, but come on, it's the same format as Galaxy S23 Use Magsafe charger from Apple. Assemble with two M3x8 screws. I added two GOST 11371-78 washers to make the hinge more strong and prevent the screws from…

Downloads
214
Likes
33
Rating
0
P
PrintablesGabriel Felipe

S23 Ultra Case

Prototipo de case para celular

Downloads
210
Likes
10
Rating
3
P
Printables3DSniper

Samsung Galaxy S23 Honeycomb Flexible Phone Case

Noticed I never uploaded this design here, only Makerworld. Hope this is OK for exposure but the model here has 'bricks' in it because I want people to keep downloading it there instead of here. The photos are the version you'll find…

Downloads
199
Likes
10
Rating
5
P
PrintablesInfo Sakkez

COVER for SAMSUNG S23+

ONLY FOR SAMSUNG S23+ (PLUS) Cover to be used only for SAMSUNG S23+ Does not fit all other SAMSUNG Phone Print it with a soft material such as TPU or PETG I printed a copy for a friend in PLA, but it might crack over time…you decide what…

Downloads
193
Likes
16
Rating
0
P
PrintablesTritschi

Case for Samsung Galaxy S23 Ultra (F.B.-Edition)

Case for Samsung Galaxy S23 Ultra. Extra buttons are inserte afterwards. Actually in the state of checking best fit. Maybe an update will be necessary. F.B. Edition is a special edition with Multimaterial Print. I printed white and black…

Downloads
170
Likes
12
Rating
0
P
PrintablesWhity

Bosch BCS230 & BCS250 E-Bike charger holder

Use (high quality) double sided tape to mount the charger holder to a wall (it has no screw holes). I highly recommend Tesa Powerbond Indoor (50 kg/m) or Ultra Strong (100 kg/m). It's quite expensive, but absolutely worth it. Place the…

Downloads
164
Likes
14
Rating
5
P
PrintablesDaniel S

Samsung Wireless Charger EP-P5400 (for S23 Ultra)

Two-Piece assembly for Quick Wireless Charger EP-P5400. Print and slide together, finished! Alignment Feature for S23 Ultra with Samsung Leather Case, smaller Phones should work too -Cutouts on bottom for 4x 3M Bumpon SJ 5076 -Supports…

Downloads
162
Likes
44
Rating
5
P
PrintablesGruthius

Samsung S23 Ultra Airplane Holder

A remix of the iPhone 14 phone holder

Downloads
156
Likes
24
Rating
0
P
PrintablesStrange Loops

Samsung Galaxy s23 ultra bumper case

This design fits very tight to prevent the case from falling off so some resizing may be needed for other printers (tested on a1 mini) Works with pla/petg (tpu is untested) Printing vertically with tree supports for top piece is recommended

Downloads
152
Likes
19
Rating
0
P
PrintablesTomson Design

Samsung S23 hard case 2 models

Samsung S23 (small version, not+) hard case. Slim case, only 2mm side and 1,5mm top/bottom. I have not made any snap fit, i use quick glue to make it strong. I have made tongue and groove to secure to not glue any on the phone but be…

Downloads
150
Likes
15
Rating
0
P
PrintablesMarek Černý

Samsung Galaxy S23 (base model) dummy phone

This is a dummy phone of the base model from the Samsung Galaxy S23 series. It was made by measuring and replicating the real phone, so it looks almost exactly like the actual device. However, it’s not a working phone—it doesn’t have a…

Downloads
147
Likes
7
Rating
0
P
PrintablesMask Man

Phone holder S23 Ultra (Table)

Hello friends, today I have made a table top phone holder for Samsung S3 Ultra for you guys, download it, make it and share with me and subscribe and follow us, thank you

Downloads
141
Likes
13
Rating
0
P
PrintablesTorin :l

Samsung S24 case (should work with s23 and s25) Magsafe ring compatible

Phone case for samsung s24, since the s23 and s25 have the same dimensions it should work for those devices aswell but you may need to make adjustments. It has space to add magsafe magnets, I bought mine off aliexpress and they're strong…

Downloads
138
Likes
9
Rating
4
P
PrintablesKubaaa

RS232 DB9 DB-9 cover

RS232 DB9 DB-9 cover

Downloads
138
Likes
5
Rating
0
P

VESA Mount Adapter for Dell S2218, S2318, S2319, S2418, S2419, S2718, S2719 Monitors

I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…

Downloads
130
Likes
9
Rating
0
P
Printablesdziobu

Proxxon KS230 limiter

Limiter for Proxxon saw.

Downloads
129
Likes
12
Rating
0
P
PrintablesSaleh Binmaleh

Original Samsung Official Galaxy S23 Ultra Rugged Gadget Case (EF-RS918) - Titan back plate adaptor

I 3D-designed this back plate mount to fit the Samsung Galaxy S23 Ultra Rugged Gadget Case. It lets you easily use the case with a car mount or other mounts. It’s lightweight, simple, and works great for everyday use—perfect for…

Downloads
127
Likes
13
Rating
0
P
PrintablesAnto Balta

S23 Ultra Case

This is my first model ever and i think its good! If you try this model please comment here.

Downloads
126
Likes
9
Rating
0
P
PrintablesJsR

Samsung Galaxy S23 Ultra case for RAM mount.

I created case to my phone, that can be attached to RAM mounts. Ball is one inch and case splits in two part. Fast and easy to take phone off from case. Power and volume button also works. I needed to press volume button out of case and…

Downloads
122
Likes
44
Rating
0
P
Printablescrazy.biker_84

Servo frame for Corona DS239MG

A servo frame suitable for the Corona DS239MG wing servo. Optimal for gliders like f3b, f3f etc. or any other wing which is laminated in monocoque construction. Since I used cfk-reinforced filament as the material, the part is optimized…

Downloads
116
Likes
1
Rating
0
P
PrintablesCharlie Gallo

ttl to rs232 adapter base

TTL to RS232 adapter base small base for a cheap ebay adapter Additional parts: 2x 8mm M3 screws Category: Electronics

Downloads
116
Likes
7
Rating
0
P
Printablesholla2040

D-SUB (RS232 DB) Connector Soldering Mount

I've been soldering those darn DSUB connectors for nearly 40 years and finally made a mount to hold them for soldering. Uses 10mmX2mm neo magnets. These magnets hold connectors in place even when wires are connected. Mounts for DB9 M/F…

Downloads
114
Likes
12
Rating
0
P

Samsung Galaxy S23 Ultra camera ring guard

I printed this in 3dSolutions.com Natural Clear flexible TPU filament. The three rings are equal sized and perfectly circular, but I manually trimmed the bottom ring on my print to accommodate my eGrips skin sticker.

Downloads
111
Likes
16
Rating
0
P
PrintablesPieterv24

Dell S2318 Vesa mount adapter (Aluminium stand)

Vesa mount adapter for use with Dell s2318 monitors. Could work with other s2x monitors that use the aluminum stand.

Downloads
104
Likes
14
Rating
0
P
PrintablesRuben U

Samsung S21 - S23 phone holster

I use this phone holster in a clean room. I've designed holes in the bottom for particle reduction and as a drain in wet environment. 2" belt loops. PETG was used at 0.2mm LH. Printed vertically on a Prusa MKS3+ and Sovol SV06 plus. , no…

Downloads
104
Likes
11
Rating
0
P
Printables3DSniper

Samsung Galaxy S23 flexible Phone case, small

Noticed I never uploaded this design here, only Makerworld. Hope this is OK for exposure but the model here is the wrong file, because I want people to keep downloading it there instead of here. The photos are the version you'll find…

Downloads
103
Likes
4
Rating
0
P
PrintablesJankes0493

Phone and smartwatch stand (Samsung galaxy s23+ and Huawei GT2 PRO)

Phone and smartwatch stand (Samsung galaxy s23+ and Huawei GT2 PRO)

Downloads
101
Likes
20
Rating
0
P
PrintablesBennyHuang

Samsung Galax S23 Ultra phone case

A case that provides enough protection for your Samsung Phone. If you appreciate my work, please support me. Your encouragement means the world to me. https://makerworld.com/zh/models/403215 Print Settings Printer Brand: Bambulabs…

Downloads
101
Likes
14
Rating
0
P
PrintablesWaDMatrix

Halter Samsung S23 Ultra

Kann bequem mit der originalen Hülle hoch oder quer gehalten werden

Downloads
96
Likes
13
Rating
5
P
PrintablesWojtekMac

Samsung s23 full cover case

This is full cove version of my Samsung s23 case printed from TPU (other is for pet-g) I added also ‘logo’ which can be printed separately (or with AMS). I printed it with PLA, press to the place and heat a bit (with hairdryer) for better…

Downloads
95
Likes
4
Rating
0
P
PrintablesHighHussar

S23 Ultra Charger Stand Horizontal Vertical

A Samsung Galaxy S23 Ultra Charger stand that you can use vertically and horizontally. I made it specifically for the original Wireless Samsung Charger and the S23 Ultra. The gap is about 6mm wider than the phone so it should fit with…

Downloads
93
Likes
11
Rating
0
P
Printableskarel.works

RS232 Connector case

Case for serial port RS232. Shape sould fit on commont plastic case for this type of serial port, like this:

Downloads
85
Likes
5
Rating
0

RS232 connector short version

If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul RS232 connector short version

Downloads
77
Likes
8
Rating
0
P
PrintablesDominik

Galaxy S23 Ultra - Razer Junglecat case

This makes it possible to use your Galaxy S23 Ultra with Razer Junglecat controller. The original design is very variable and can be customized, so I measured my Galaxy S23 Ultra and through multiple iterations I finally reached a version…

Downloads
72
Likes
11
Rating
0
P
PrintablesGreyman

S23/24 Ultra Car Mount

A simple Samsung Galaxy S23/24 car phone holder. Fits into a standard CD player slot, and has a hole in the bottom for a USB C cable to pass through.

Downloads
68
Likes
7
Rating
0
P
PrintablesNET

Case for USB-to-TTL Programmer RS232 (CH340G)

This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…

Downloads
66
Likes
4
Rating
0
P
PrintablesJózsef Krizsik

Samsung Galaxy S23 TPU Case

Samsung Galaxy S23 TPU Case

Downloads
63
Likes
4
Rating
0
P
PrintablesCreo2005

Infiray P2 Pro smartphone and stand rail adapter Samsung S23

Made in Fussion360 from step FreeCAD for Samsung S23

Downloads
60
Likes
14
Rating
0
P
PrintablesDejanK12

Samsung galaxy A54 and S23 FE - safety glass installation tool - Panzerglass

A tool to help you properly align and install the safety tempered glass from Panzerglass on the Samsung Galaxy A54 5g smart phone. Easy to 3D print and install (see the attached images). When installing glass, firstly put on the tool and…

Downloads
59
Likes
16
Rating
0
P
Printablestexmur

S23 SOYES PRO Phone holder Bambu Lab P1P, P1S (like Panda Touch)

Phone holder for controlling the printer. The small P1P display is not touch-sensitive and therefore the settings of the print parameters may quick temperature setting is quite tedious. There are also projects like PANDA that control the…

Downloads
59
Likes
11
Rating
0
P
Printablesfjkraan

RS232C sub-D DE9 shell

In the times before USB, serial ports were used for lots of computer interconnections. In those days, they were mainly large 25 pin connectors, and adapters for the carious pin cinfigurations were required regularly. For the later 9 pin…

Downloads
58
Likes
4
Rating
0
P
PrintablesRob Stirling

Phone Holder Samsung Galaxy S23 FE

A generic phone holder that I made for my S23 FE. It was designed to mount to my monitor with double sided tape. Specifically made to fit my old ASUS VG248QE. I have also included the “base” model without the monitor arm to be remade as…

Downloads
57
Likes
1
Rating
0
P
PrintablesDiablo

Samsung S23 Ultra Hard Case

These covers are under threat of being removed. Although I still use an s23 ultra the 24 and 25 have now graced peoples hands. If you print this, please share an image of a make. It may be the difference between this staying here or being…

Downloads
57
Likes
12
Rating
0
P
PrintablesGriff

Samsung Galaxy S23 Ultra - mock-up

This mock-up is based on the size of my Samsung Galaxy S23 Ultra phone with a thicker Otterbox case. I made it because I have a pocket on a pair of jeans that normally fits my phone just fine, but was tighter than usual and would barely…

Downloads
56
Likes
6
Rating
0
P
PrintablesBlitz City DIY

ESP32-S3 BLE RS232 Controller Case

https://learn.adafruit.com/esp32-s3-ble-rs232-controller

Downloads
52
Likes
4
Rating
0
P
PrintablesKSM Design

Samsung S23 Ultra Multi-Stage Lens Hood Kit

Introduction As awesome as the 10x telephoto lens is on the S23 Ultra, I noticed that in non-ideal lighting conditions (or if your lens is damaged or smudged), captured images could sometimes look blown out with poor contrast. I made a…

Downloads
52
Likes
5
Rating
0
P
PrintablesStartracer

Proxxon KS230 hinged saw blade case

A hinged case for 50mm and 58mm saw blades for the Proxxon KS230 mini table saw. Edit1: Fixed an error in the TOP file. Edit2: Overall improvements. 2mm bigger on each side to better fit the 58mm blade. Edit3: Uploaded the sketchup source…

Downloads
52
Likes
5
Rating
0
P
PrintablesAvise

Isolated USB To RS232 Converter Case

This is a case for the isolated USB to RS232 converter. It does not require any screws and just press fits in to place. There are two types of top cover, one plain and one with text. Print instructions Printer Brand: Prusa Printer: i3…

Downloads
52
Likes
3
Rating
0
P
PrintablesMask Man

Phone Holder S23 Ultra(wall mount)

Hello friends, today I have made a wall-mount for Samsung S3 Ultra for you guys, download it, make it and share with me, and subscribe and follow us, thank you

Downloads
51
Likes
7
Rating
0
P
Printableswolf

Cell phone holder for Samsung S23 Ultra or a tablet

i used #6 3/4" screws the holes are 3.5mm. Designed this for my Wife's Samsung S23 Ultra when in its case. Witch is16.7mm thick but the space is 20mm can fit a Thicker case. i recommend at least 15% infill and 3 perineters *NOTE* Bottom…

Downloads
49
Likes
7
Rating
0
P
PrintablesAzknom

Samsung S23 slim case

This is a hard case for the Samsung S23 phone. I have printed it in petg and it fits very tightly and is very slim. Prints well without supports using the 0.20 structural profile on the Core one. If needed, add a few extra top or bottom…

Downloads
48
Likes
2
Rating
0

Sled Jig Rail Guide For Ryobi RTS23 Table Saw

The miter slot for the Ryobi RTS23 table saw is a weird shape and there's only one of them. In order for any tools using the slot to be useful, there can't be a lot of wiggle room. I've previously made a wooden rail guide for my sled, but…

Downloads
46
Likes
3
Rating
0
P
PrintablesWojtekMac

S23 case tri

Samsung S23 case with triathlon graphic for pet-g or other not flexible filament.

Downloads
45
Likes
1
Rating
0
P
PrintablesKylie Wilson

VW Golf Mk4 Dashboard Phone Holder (Parametric, Fits S23 Ultra + Custom Sizes)

(imported from thingiverse ) I bought an old Golf Mk4 last week (May 2023) and remixed nUmbinho’s “ Golf 4 PDC Holder ” to create a proper phone mount for my Samsung Galaxy S23 Ultra. Their original model fits perfectly (great work!) so…

Downloads
45
Likes
7
Rating
0
P
PrintablesMacGyverr

S23 Ultra in an Otterbox phone stand

I liked Johnnier02's design, but wanted to be able to use my phone in its Otterbox case, I also wanted to be able to print it without supports. Things modified from the original: Wider. Front Lip shorter and deeper. No cord holes going…

Downloads
42
Likes
2
Rating
0
P
PrintablesStartracer

Proxxon KS230 saw blade case

A case for 50mm and 58mm saw blades for the Proxxon KS230 mini table saw. Edit1: Fixed an error in the TOP file. Edit2: Overall improvements. 2mm bigger on each side to better fit the 58mm blade. Edit3: Uploaded the sketchup source file.

Downloads
41
Likes
7
Rating
5
P
PrintablesKrosta

Pegboard holder for Samsung Galaxy S23 Ultra

This phone holder is for pegboard of various models (MARS Svratka, Küpper…). It was created for Samsung Galaxy S23 Ultra and the inner dimensions are 82x12.7mm.

Downloads
40
Likes
9
Rating
0
P
PrintablesThenated0g

Corona DS239HV Servo Holder

Corona DS239HV Servo Holder

Downloads
39
Likes
2
Rating
0
P
PrintablesSMUTHERBUCKET

S23 Ultra phone holder

This may not be applicable unless you use the same monitor and desk as me, but could be remixed to make your own.

Downloads
36
Likes
7
Rating
0
P
PrintablesBrummy

Ikea Hemnes Mini Shelf for Samsung S23 Ultra with Cover / Ikea Hemnes Handyablage Samsung S23 Ultra

Ladeschale und Ablage für das Samsung S23 Ultra . Es ist für das Hemnes Bett.

Downloads
36
Likes
11
Rating
0
P
PrintablesEd_Bai

This model: Balloon sealing device (1945) (US2396906A)

Project Expired patents - "Reviving Forgotten Inventions" I search Google Patents for intriguing expired patents and bring them back to life—because I believe they’re either interesting, funny, or genuinely useful. Once I find a design…

Downloads
34
Likes
6
Rating
5
P
PrintablesDylanMcC

Bed Shelf - Remixed to fit S23 Ultra

Made a bit longer as original model was too short to fit my Samsung S23 Ultra

Downloads
34
Likes
2
Rating
0
P
PrintablesOba

S23+ Super Thin Bumper

Remixed the original model to my needs. I like the bumper concept and did some minor changes

Downloads
34
Likes
4
Rating
0
P
Printablesmoedido

f.u.n.k.e. ATR833 BLE RS232 case

Case for original f.u.n.k.e. ATR833 Sub-D connector (SSATR2) to add BLE serial for Skydemon. It is designed in a way to sit under the original connector at the back of the radio and not physically block anything else (as it's virtually…

Downloads
33
Likes
1
Rating
0
P
PrintablesPooSlide

Kohler (R) Stem Driver Replacement (1070733 K-TS23501)

This model is a direct replacement for a plastic stem driver that tends to break in some Kohler-brand shower handles. Recommend printing in PETG or ASA for strength. Original part tends to break at the edges of recessed square drive, this…

Downloads
33
Likes
1
Rating
0
P

Case for NodeMCU V3 ESP8266 + MAX3232 RS232 to TTL Serial Port Converter Module

The lid snaps in, just screws for mounting the electronics required.

Downloads
33
Likes
2
Rating
5
P
Printablesguidosenff

Cradle that fits Aten US234

For those people who like a tidy desk, this is a cradle for the Aten US 234 USB switch! It has two screw holes which are reachable through the front LED indicator holes and these allow you to install the cradle under your desk. After…

Downloads
33
Likes
1
Rating
0
P
PrintablesKian Ryan

Sidecar for Psion - Lipo powered PPP Wifi Modem and Terminal for RS232 devices

The Sidecar for Psion is portable PPP modem and linux terminal for RS232 devices powered by a Raspberry Pi Zero. Required: Raspberry Pi Zero Pimoroni Lipo Amigo Pro Pimoroni Lipo Shim for Raspberry Pi Lipo Battery 2200mAh PiRS232 Board…

Downloads
33
Likes
6
Rating
0
P
PrintablesMike

D-SUB 9 female RS232 Dust cover

I needed a dust cover for outdoor appliances with a D-SUB 9 female plug. Could not find any, commercial ones are hard to come by but seem to be flexible silicone rubber base so used TPU flex. Also added a little recess to have something…

Downloads
32
Likes
0
Rating
0
P
PrintablesMarco Schmidt

Halter Samsung Galaxy s23

Einfach in ASA,ABS oder Petg oder Pla oder etwas anderes

Downloads
32
Likes
1
Rating
0