Michael Scott
Michael Scott From The Office.
Print approx. €18.15–€22.18 excl. taxPreliminary estimate for one variant
- Downloads
- 300
- Likes
- 84
- Rating
- 0
252 models
Michael Scott From The Office.
Print approx. €18.15–€22.18 excl. taxPreliminary estimate for one variant
Following on from the English flag keyfob design, here is one of similar size for the Scottish flag of St Andrew (the Scottish national flag). This one can obviously also be used for any flag which has a similar layout but different…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
The maximum height is 4.5 mm. The top blue part is 0.6 mm high. If you use the stl, add a colour change before this starts. I used a 0.15-mm layer height, enabled ironing, and printed using Jayo white PLA and Lonenessl Blue PLA. The print…
Print approx. €16.04–€19.61 excl. taxPreliminary estimate for one variant
Raymarine Dragonfly 4 Pro mount that adapts the fish finder display to sit in a Scotty mount. Print in PETG, 30% infill, with supports (gives best outcome) Allows you to mount a Dragonfly 4 Fish Finder/GPS to a Scotty mount. This piece is…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a handy fishing storage aid for your boat. If you are using a drop weight / snap-on weight and a paddle flasher, you will love this add-on. Holds your bait, ball and flasher securely while you transit. Cut-outs also hold two…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…
Here is the Astroworld head, double-sided! I printed this head both times using “everywhere” supports in PrusaSlicer. It was very difficult to remove the support material without damaging the pieces of Travis's hair, so I recommend…
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
Travis model was taken from the game and processed to be printable in Blender. For the VBuck base I used Olo Deepdelver's model → https://www.printables.com/model/192508-fortnite-vbuck-3-color-remix-no-mmu ←
Rod holder base/dock. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: .200 is what I used. Infill: 65% is what I used. Notes: I only used supports for the square locking lug inside the shaft…
Fits iPhone 13 with case and supports lightning cable charger.
Here is a model that fits into Scotty Rod Holder mount. Now You can design whatever You like on top, and model Your own custom accessory for the boat, kayak, belly boat etc…
These printables fix a well-known design problem that exists with Scott's EdgeGuard Mini and other various versions of the broadcast spreaders. The design issue is the impeller sits below the wheels. This prevents the fertilizer from…
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
Adjustment of the storage for the Apple Watch/AirPods charger. Úprava uložení nabíječky pro Apple Watch/AirPods
So, thank you to Scottdee for the original parts that he posted. These parts were too low resolution for my taste and looked blocky when printing them. I used Scott’s specs, but totally re-built the main body and thrusters from scratch. I…
My friend's dad kept losing the original hopper paddles for his walk-behind spreaders. These fit snugly on the hex shaft and also drop down 1/4" into the hole in the hopper to minimize the slop in the shaft. These were printed in PLA and…
Cactus Jack Logo Plague
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
UTOPIA Travis Scott Keychain
I made this model from scratch since I was not able to modify Scotts files in fusion to have it work with my phone and case (not good at fusion) so I studied his design and replicated its aesthetics in OnShape. The phone cutout dimensions…
Es una figura de un terrier escocés. Lo imprimí con mi Artillery genus pro en PETG con boquilla de 1 mm, lado aproximadamente 2 horas.
Thanks to the amazing work of ScottYu-Jan and OVERWERK we have a cool stand for the iPhone. Marlfox did an amazing job by using parameters in Fusion to be able to adjust the size. What i did here is just figuring out the best size for the…
SCOTT Keychain for your keys. Enjoy the model and leave your like I really aprecciate your support. Thanks.
🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny This small model captures the iconic folded ears and fluffy look while staying super…
I really liked Scott Yu-Jan's iphone 15 standby mode dock, so I made it fit an iphone 12 with a thin hardshell case. I also modified the airpods charger slot to slot in from the other side, so that the rear of the case can be shorter than…
I added the Scotty Mount male end from https://www.thingiverse.com/thing:793219 the the Swill Saver gimbaled drink holder. The stl has the drink holder scaled up by 2% to increase the can size. The Scotty Mount is scaled to 97.5% and is…
There is a hole in the center for a 48in x 0.5in dowel to give it more strength, I used a wood Dowel for mine but Metal should also work. you will need 4 of the blade part and 1 of everything else.
💙🤍 Are you a fan of Scotland's shaggy, tongue-sticking cutest bovines? 🐮 This incarnation of my ox art toy comes from the highlands. The horns can be printed in a separate color and assembled after. The central X shaped cache also prints…
complete redesign of the source. Fork crown adapted to RockShox 35 TK Silver installed in the Scott Genius eride. Mounting is done with 2 stainless steel screws 5x10 Print Settings Printer: VORON 2.1 Rafts: Doesn't Matter Supports: Yes…
Things changed: Increased depth of phone slot to make case flush with dock Chanced length and with of dock for 12 pro max with 2mm tolerance for case (dimensions in screenshot)
🐾 Scottish Terrier (Scottie) The Scottish Terrier , often affectionately called the Scottie , is a bold, dignified, and unmistakably charismatic breed. Instantly recognizable by its distinctive beard, wiry coat, and confident stance, the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Simple keychain scalable
I have created this clip with FreeCAD because my original clip broke. This clip goes from the outside and back of the helmet through the helmet into the inside. It requires a little counter-clip from the original clip which is stuck…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Chain Frame Protector Scott MTB - Protezione telaio carro posteriore SCOTT MTB Use zip ties to fix it Resize to adjust dimensions If you download/enjoyed this file, please leave a like - Thx
Scott Scale MTB Rear Mudguard / Fender / Parafango posteriore 29" M4x10 screw/vite (1 piece/pezzo) Cable Tie/Fascetta (2 pieces/pezzi) Filament: PETG/ABS If you dowload/enjoyed this file, please leave a like - Thks Category: Sport &…
Come support these models over on Patreon Buy my time, Not my models. M8 Scott 1/100 made for easy printing. Really really wants greebling if it is scaled up and the pintle/AA MG should be on a riser, but the riser doesn't work at this…
If you are installing a dropper post with internal cable routing on your Scott Genius 740 bike you'll need this cover. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: eSun…
Like your little dogs, but with fewer details? We've got you covered. Low poly adaptation of this the model by trobeirof1 here - https://www.3dpea.com/printable-detail/-Scottish-Terrier-db0CkG
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is based on the original plastic part but I made it a little bit thicker so it provides good mounting of the TwinLoc handles. Printing This model should be printed from PETG or ABS. No need for supports. No special settings…
Exaggerated caricature-style miniature of Travis Scott. Designed in a bold, expressive style with oversized features and simplified chunky details, making it paint-ready and optimized for 3D printing
This is a remix of the Ryden Bikes Setup and Measurement tool to use the widely available Wescott wood yard stick instead of the Helix 1m ruler. Make sure to adjust your settings to accommodate for material shrinkage.
The keys of the Scott paper towel dispenser at work got lost and we made them quick new thanks to cad and 3D printing PLA and PETG were used to print those. They will work probably also in other public paper towel dispenser.
Wahoo\Garmin mount for Scott Creston handlebar. Original Wahoo\Garmin stem mount + 2x M4x14mm bolts needed. Versions: Wahoo_S - short version for Bolt Wahoo_L - long version for Roam Garmin_L - long version for 1040 Print the mount,…
I wanted to add a simple cover for the dock, so I did. While I was at it, I made a few small changes, like ensuring there were no angles over 60° to make it a little bit more printer-friendly (though it already was). I also tightened up…
A customized version of the Standby Mode Dock originally created by Scott Yu-Jan & OVERWERK , adapted specifically for the iPhones 17 Pro and 18 Pro with the TechWoven case . The dimensions were customized using Marlfox's fully parametric…
Remixed from Scott Yu-Jan (ft. Overwerk) dock model. Also watch his fantastic Video: https://www.youtube.com/watch?v=L3n For Resin printing the extraction mechanism is too unreliable as it keeps stuck very often. I removed it and added…
Kayak phone holder mount to go in a Scotty fishing pole holder mount. Settings are set for an iPhone 13. Edit parameters in Fusion 360 file to adjust phone size, mount height, and angle. Print rod standing straight up (without supports is…
We have a Scotts Turf Builder EdgeGuard Mini Broadcast Spreader for spreading fertilizer and weed killer on our lawn. The problem is that lots of the early season weed and feed type fertilizer is supposed to be spread when the weeds are…
Print in PETG using lots of walls and strong infill patterns. Then do a stress test trying to break the mount. If it doesn't budge, carefully use it on a bike.
Thingiverse Model by ScottDee. I remade Duck Vader Because I wanted to be able to print it with 2 different colors, and without supports. As a side benefit you can also turn the head to any position. There are 2 heads the original…
Suitable to guide the throttle cables when a Scotts Steering Damper is installed. Designed for my Husqvarna FE501/2023 but likely useable for KTM and GASGAS. Printed with carbon fibre reinforced filament. Use the spacer for mounting the…
Meet Fil Futura, this is our well-known figure you have seen on our spools and or other products. We print and use Fil to showcase all our materials and colors. Feel free to print them too! We scale him at a 12cm height for our promotion…
I liked the original, so I remixed it to resemble my cat.
Printer: Ender 3 V1 + Hemera direct V6 hotend Filament: 1.75 Elegoo PLA+ Light Grey Slicer: Orca Nozzle: .4 Quality: .2 Suppot: None Infill: 30% Rectinlinear See Sy's Excellent Peglock System for peg options.
I purchased a paddle board that came with a Scotty mount location, since I didn't have much use for a fishing pole holder I modeled up this cupholder to use instead to keep my beverage secure on the board. Sizing is designed to firmly…
Un semplice porta scottex con blocco a vite del rotolo. Può essere fissato su qualsiasi superficie con un pò di biadesivo o con una vite, non ho aggiunto il foro per la vite perche così può essere adattato ad ogni esigenza, facilmente…
This is an interface between a RAM mount ball (1 inch) and a Scotty male end. I have modified the neck a bit thicker than the photo shows. Please "like" this file if you collect or download it. Print Settings Printer Brand: MakerBot…
Michael Scott Pencil Sharpener Add your own standard hand held sharpener.
Scott MTB Handle End Cap Printed with PETG Black/White combination. 100% infill, no supports. Enjoy.
Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament brand: Prusament Filament color: White Filament material: PETG Notes: Consiglio di non eccedere l'aumento/riduzione in scala del 15% a…
Heart cookie cutter with raised edges - Tagliabiscotti a cuore creativo con bordi rialzati.
Modded the cable clip from here: https://www.thingiverse.com/thing:2590682 in order to have additional support for a 2mm straps, you can carry a spare tube, an additional water bottle or anything you want. EDIT 25/01/2022: Added two more…
The spacer fits the scott addict rc models from 2024 when you want to pair the deda elementi stems to you bike with full dcr integration. I printed in PTCG CF, and anything less is not recommendable. preferably nylons or similar should be…
Scott is 169 mm long x 50 mm high x 20 mm deep. It is made with SketchUp 2015 using the Arial Bold font. Print instructions 10% fill, 3 perimeters
I wanted a compact, low profile, camera adapter for my kayak. I modeled this up to based on Prestonf's Scotty male end adapter. It seems like it'll fit my needs perfectly. Print this part with no support material. The main Scotty adapter…
Diamond Puzzle Original design: American designer Scott Elliott. I saw this puzzle on YouTube and decided to try recreating it in Fusion 360. I think it came out well. Unfortunately, I would rate the difficulty of this puzzle at about 1…
This is a Cactus Jack model for print
From the animated series Scott Pilgrim Takes Off is a stencil. It's the first scene when they first met. Post makes of this stencil.
I created this remix so that I could have a place to attach my transducer arm without taking up an entire mount location on an inflatable skiff. I happened to have a Scotty 141 transducer mount so I remixed the linked model to use the…
The gasket lid with a little bit thicker body. The inserts are left intact
New model for free! Michael Scott from The Office Follow me for more Z-Minis Figures. Recommended Print Settings (Feel free to adjust as needed): Printer Type: Resin or FDM Layer Height: 0.05mm (Resin), 0.2mm (FDM) Supports: Recommended…
Meet Fil Futura, this is our well-known figure you have seen on our spools and or other products. But this time he's ready to Surf throughout the Summer of 22. Feel free to print them too!
I got a scotts elite spreader and the mixer pin bent instantly on me, So I made this one. This paddle will work as long as you're spreading something light. If you're spreading something dense/heavy, you may want to decrease the size of…
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
Replacement Paddle/Spinner for Scott's brand Wizz battery powered seed/salt spreader. Original falls off easily. This replacement snaps on firmly.
Designed for the Syncros RR2.0 stem. Maybe also compatible with the RR1.5 stem since the stems are cross compatible. The design is modular. The M3 holes for mounting the Garmin quarte turn mount to the arm are spaced 20mm apart. If the…
Masonic Scottish Rite Eagle Magnet with a yod in the middle of a triangle. I use these as gifts or as magnets for the fridge.
I made this mount for 2 light pods to fit in my scotty rod holder base. hollowed out in the middle to feed wires through with a dt style plug for removablilty. i printed it in petg seems plenty strong enough. i used auxbeam Pro series 3"…
Here is Scott Tracy from the Thunderbirds. I haven't painted him yet, but I wanted to get him up ASAP. Printed him in beige so that I only need to paint his clothes. Working on the whole collection, so follow me for more. If you like what…
Chain Frame Protector Scott MTB - Protezione telaio carro posteriore SCOTT MTB Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Sport & Outdoors
Fit well into a purchased Holder. Might be slightly looser fit to slide vertically then the rod holder but snug and no play when seated. Printed PETG, 25% infill and 0.2mm layer height Printed to use as a Base Ball to attach My IPilot…
a realistic photo of Travis Scott for your 3d printer
I made the feet for my 45 minute carbon Scott branded SCBA tank so it won't roll around. Designed with slots on the side to have a strip of velcro to go around the tanks to secure it. There is enough space for thin double sided tape so…
The Sandlot - Scott Scotty Smalls (Tom Guiry) - 1993 3D printable model.
Update 4/12/202 Ordered new .9 degree motors for X/Y axis and new belts and idlers. Will update when I receive the parts and start the work. See Update # 15 I'm sorry that Thingiverse has turned this build log into a difficult read.…
The broad-fronted moose from Pleistocene North America.
Lost or broken handle/turning knob for your hand spreader? Well here you go! Designed to fit a Scotts hand seed/granule spreader. Printed at .2 in Inland pla+ No supports.