Search results: shaft

Sort order

1,353 models

P
PrintablesCarter

Anti-Wobble Z axis bracket with Floating Driveshaft Bearing

Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…

Downloads
911
Likes
102
Rating
5
P
PrintablesPrism08

Driveshaft #4 Unimog RC edition

This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…

Downloads
560
Likes
53
Rating
0
P
PrintablesThommyfix

Cardan shaft coupling

The parts can be printed without support with PETG, 0,4mm nozzle, 30% infill and 6 contours are recommended for better stability. For own shaft connections the coupling is attached as *.stl and *dwg file. For non-printable parts, 4 M2x6…

Downloads
454
Likes
47
Rating
0
P
PrintablesSolok

LS Cam shaft tool

Bolts to your Gm LS/LQ series camshaft for install and removal. I would use cap head allen bolts for the close clearance Tested on a 1999 Corvette LS1 camshaft.

Downloads
301
Likes
34
Rating
0
P
PrintablesM

Dremel Flex Shaft Routing Guide

Router guide you for use with the flex shaft (and clones). One normal version and one with a flat side so you can squeeze it into awkward spaces. I use it for putting notched holes in Bud Enclosures with a flush trim bit. Don't try to use…

Downloads
221
Likes
37
Rating
3.5
P
PrintablesPetro Molala

Shaft Collar / Clamping Collar Kit

Secure your rods, pipes, or shafts precision and variety! This 3D-printable Shaft Collar / Clamping Collar Kit offers 2x3 sizes to suit your needs: Big (Ø26-31 mm inner / HIGH L=30) — for larger shafts or tubes. Small (Ø20-24 mm inner /…

Downloads
84
Likes
7
Rating
0
P
PrintablesFleckione

Grippy universal potentiometer knob (for 6mm shaft)

Inspired by the cap of my 3D Connexion Space mouse, i decided to design a knob with the intention to mount it to a PWM dimmer. It should fit any potentiometer with a 6mm toothed shaft and be a pressfit. The knob is approx. 45mm in…

Downloads
72
Likes
18
Rating
0
P
PrintablesCranky Cat

Customizable Knobs for Line 6 Variax or any Rotary Encoder or Rotary Switch with 6mm D Shaft

I really wanted a Variax and all I could find was a Shuriken model. I like the standard Variax setup so I flashed the Shuriken but now the knob labels do not match the presets. Instead of using tape to cover the original knobs, you can…

Downloads
70
Likes
10
Rating
5
P
PrintablesKizzard

Ecovacs Deebot Brush Roll Shaft Adapter

Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…

Downloads
66
Likes
10
Rating
0
P
PrintablesColicab

Shaft (rod) for Junkers boiler/gas heater knob

Cut whole or rest of original shaft, drill 5mm hole with 3mm diameter and insert rod. Shaft is cut so carefully insert to match old values, e.g. on 0. Designed to be little loose in order to easy future removal. Tested in PLA and PET.…

Downloads
61
Likes
3
Rating
0
P
PrintablesPaul C

Arrma Shim for Axels 2.3MM for 3MM shaft

These are small shims that always seem to disappear and are hard to find to replace. Take less than a minute to print and match the Aroma original well. 2.3MM thick and made for 3 MM shafts

Downloads
60
Likes
13
Rating
0
P
PrintablesHawkeye

0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors)

0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors). I apply these gear wheels for focuser & rotator control of telescopes via ONSTEP ASCOM driver. One M4 flat-head (8mm in length) screw is…

Downloads
58
Likes
6
Rating
0
P
PrintablesDanijel

Simple crankshaft mechanism - working

By accident created a nice little crankshaft mechanism. With very little cleanup, mostly the brim, and a careful rotation of the parts, it works. It is one print, no support material or anything else.

Downloads
56
Likes
4
Rating
5
P
Printablesjvazac

Water temperature sensor shaft for swimming pool plumbing

Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…

Downloads
44
Likes
8
Rating
0
P
PrintablesDanAndersen

Universal Z-Motor Mount with F9-20M Loadreducing on Steppermotor Shaft

Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…

Downloads
38
Likes
3
Rating
0
P
PrintablesOlafurs

Ninco Driftrax Gear Shaft

Spare gear shaft for Ninco Driftrax RC car. Printed in PETG at 0.2mm layer height.

Downloads
28
Likes
3
Rating
0
P
PrintablesPilote NEXUS

Tarmo 4 Drive shaft upgrade

I designed this drive shaft optimization. It is a hexagonal shape with an increased section. I had issues with TPU shaft. Indeed, the coupling was grinded in early 15 minutes of uses. I decided to change the print orientation. It works…

Downloads
26
Likes
6
Rating
0
P
Printableszoddas

Probata Replacement Shaft

Internal shaft for Probata thermostat. The plastic parts of these thermostats gets very brittle over time. Making new shafts connecting the potmeter to the adjuster wheel extend the life of these units. This print alone has saved me close…

Downloads
6
Likes
1
Rating
0
P
PrintablesEA3D
Downloads
3,128
Likes
172
Rating
5
P
PrintablesMaxGyver

Boat Propeller 20cm, 13cm and 10cm diameter, 10mm shaft

Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…

Downloads
3,128
Likes
159
Rating
4.83
P
Printableswhoisjako

Dart shaft

Dart shaft with 2BA thread.

Downloads
2,281
Likes
174
Rating
4
P
PrintablesGrafit

Spikey Rose Stem/Shaft

This is a remixed shaft/stem for @3DPrintnovesia Realistic Rose model for the other parts please visit the original design, and leave a like and follow there too :)

Downloads
1,892
Likes
264
Rating
4.91
P
Printablesbach37strad

Guitar Knob - 6mm split shaft pot (press fit)

Quick guitar knob, wanted some black ones for my 335, but now im thinking about making them out of tpu....will update. ** UPDATE ** TPU knobs are awesome! printed at 215/55c 25mm/s 7% infill they are nice and squishy! Print Settings…

Downloads
1,658
Likes
186
Rating
4.8
P
PrintablesHidde3D

Ender 3 V2 X And Y Linear Rod/Shaft Upgrade

Updates 20 November 2023, added a Sprite Extruder Mount . Linear Rod Upgrade I used CNCKitchen inserts and ProperPrinting's tool change system for this project. Information I've made a linear shaft upgrade for both the X-axis and Y-axis…

Downloads
1,309
Likes
279
Rating
5
P
PrintablesH3dSprint

Propeller with ⌀75mm for a shaft ⌀2mm

Part is printed with PETG and need partial supports.

Downloads
1,285
Likes
45
Rating
5
P
PrintablesBuildModHack

5mm to 8mm Stepper / 775 Motor Z Axis Shaft Coupler / Coupling

Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…

Downloads
1,190
Likes
84
Rating
5
P
Printables晚杯琦礼

sherpa mini extruder suitable for 5mm shaft stepper motor

对于同一电机,2mm轴的成本为59元,而5mm轴仅成本为8元,简直不可理喻。我在互联网上找不到修改后的版本,看来我只能自己做一个了。 For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I…

Downloads
1,116
Likes
61
Rating
5
P
Printablesprintable

Axial SCX24 AX24 Driveshaft (updated)

Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…

Downloads
1,105
Likes
103
Rating
5
P
PrintablesIainY

D-Shaft Knob for Potentiometer/Rotary Encoder

D-Shaft Knob for Potentiometer/Rotary Encoder. Please remember to press Like if you download.

Downloads
1,058
Likes
57
Rating
5
P
PrintablesNic13Gamer

DC Motor shaft to LEGO Cross converter

This design can convert a DC Motor shaft to a LEGO cross piece for you to use in your LEGO sets. The design is all parametric, so you can change all of its sizes and hole diameters to your needs. It is a very small and fast print! This…

Downloads
1,003
Likes
70
Rating
5
P
PrintablesPat

Vauxhall camshaft locking tool

You need to print two as they fit back to back, to make it easier to install and remove I wet sanded the back half to remove any layer lines which could cause them to lock up. Lock the camshaft drive belt pulleys together when removing…

Downloads
992
Likes
56
Rating
5
P
PrintablesBootjevaarder

4 Stroke 4 Valves Over Head Camshaft Engine

General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…

Downloads
977
Likes
337
Rating
4.92
P
Printablesletsgo00

Spur Gear for 3mm keyed shaft (N20 motor)

This model is a part of the conveyor belt collection , but can be used standalone. Printing instructions: - Print flat Assembly instructions: - Press 2 M3 threaded inserts in the holes on the side - Use 2 small M3 set screws to secure the…

Downloads
939
Likes
49
Rating
4
P
Printablesthall72

Lego Compatible (2853.dat) Technic Engine Crankshaft

This model is compatible with the lego system.

Downloads
887
Likes
60
Rating
5
P
Printablesambrmart

Mk Ultra - 3D printable 1/10 4wd rc buggy - drive shaft remix

Goals of this project: Making the rc car more accessible by using widely available parts. The original differentials were hard to get, and although alternatives exist, they weren't easy to find. The Schumacher belts were hard to get were…

Downloads
878
Likes
157
Rating
5
P
PrintablesPrism08

Another RC Car Drive Shaft

My 2 previous designs didn't work well when trying to compensate suspension and steering, as a matter of fact they are only suitable to compensate slight misalignment for normally aligned shafts. So I will only use them between the…

Downloads
858
Likes
141
Rating
4
P
PrintablesAndrewDLCG

Guitar Knob - 6mm Split Shaft Pot (Press Fit) Remix v1

This is a remix of the original File by Back37strad. My main goal for this was to make an actual knob smaller compared to the original in height. You can see in the images how it compares to the standard knobs on my beautiful Ibanez…

Downloads
853
Likes
117
Rating
5
P
PrintablesAZ3D

LibreShred Two | 3D Printed Dual Shaft Shredder

this page is still under construction :) More to come! Disclaimer: This model is limited by the strength of the 3D printed shaft (the "weakest link" in my testing). This is best for shredding small bits and pieces of paper or thin/brittle…

Downloads
840
Likes
282
Rating
5
P
Printablesliangodesigns

120mm boat propeller for 10mm D-shaft

I originaly intendend this propeller to fit for my DIY electric SUP-board motor but you can use it to drive what ever you want. this design fits on 10mm D shaft but you can easily modify the design to fit any other type of shaft. Keep in…

Downloads
808
Likes
39
Rating
4
P
PrintablesBrooks

HGX Lite Extruder Shell with 16mm Shaft

I wanted to use LGX Lite Extruder FDM case model by SIVIS, but I couldn't sand down the shaft. Therefore, I made a hole to allow the latch to move freely. rotation_distance 53.494165 gear_ratio 44:10, 37:17 Re-calibrate your own value for…

Downloads
797
Likes
126
Rating
5
P
PrintablesMagichobos4321

Ender 3 Linear Shaft Mod

Caution: First off I am not responsible for any damage that may occur to your printer in attempting this mod. (not that this mod does any irreversible damage that can’t be fixed for under 5$) Secondly, this mod is for the base Ender 3 . I…

Downloads
787
Likes
147
Rating
4.71
P
Printablesthall72

Lego Compatible (2854.dat) Technic Engine Crankshaft Centre

This model is compatible with the lego system.

Downloads
743
Likes
52
Rating
4.75
P
PrintablesNetsim

Dual Shaft, Turbo Fan Jet Engine

Few hours of printing, a bit more then 1 kg of PLA, 4 bearings, some bolts, nuts and washers. And done. Most tricky parts to print? All casings and combustion chamber. Main parts - Prusament PLA Galaxy Silver. Fan, turbines, stators, LP…

Downloads
738
Likes
217
Rating
5
P
PrintablesAZ3D

LibreShred One | 3D Printed Single Shaft Shredder

this page is still under construction :) More to come! Disclaimer: This model is limited by the strength of the 3D printed shaft (the "weakest link" in my testing). This is best for shredding small bits and pieces of paper or thin/brittle…

Downloads
724
Likes
245
Rating
5
P
PrintablesStanley

Nema 17 Stepper 5:1 Planetary Gearbox with 5mm shaft for GT2 pulley

Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…

Downloads
688
Likes
114
Rating
5
P
Printablesthall72
Downloads
680
Likes
45
Rating
5
P
Printablesörkelprint

Knob for rotary encoder (6mm D shaft)

This is a knob for the cheap rotary encoders (eg KY-040) with 6mm diameter, D shaped. Depending on your printer, settings, tolerances etc you can add a drop of hot glue for better fixation. The cross on the bottom is to help with bed…

Downloads
644
Likes
22
Rating
5
P
PrintablesRobertusMaximus

Building Under Construction - Elevator Shaft - Part 2

Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…

Downloads
574
Likes
148
Rating
0
P
Printablesshane

Cramer RC Truggy - upgraded axle / driveshaft / CV joints

I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…

Downloads
539
Likes
86
Rating
5
P
PrintablesDJEuthyphro

Knob ☼ Knurled Shaft Rotary Encoder (Voron v0.1)

Summary This fits rotary encoders with knurled-type shafts. My Voron v0.1 screen didn't have the standard notched type of shaft, so I made this knob for it. I think it fits the Voron aesthetic well. It's wide and low profile, so that…

Downloads
528
Likes
51
Rating
4.86
P
PrintablesJeb Lee Tark

Toaster knob for 6mm D-shaft

This is just a replacement knob I had to make for my home. The original one was broken...

Downloads
517
Likes
17
Rating
5
P
PrintablesClemens

Knob for Oven (or everything with a D-shaft)

This is a remix from this Knob which for some reason had a gap that made the whole thing very fragile and by default pointed in the wrong direction.

Downloads
512
Likes
31
Rating
4.33
P
PrintablesDavid'S

Lego piece 2854 (crankshaft piece)

Printed with PETG, nozzle temp: 240, bed temp: 90, recommend printing with supports so that the axle holes are vertical.

Downloads
484
Likes
13
Rating
0
P
Printablesludodg

RC Shock shaft pliers

I discovered the RC Shock shaft pliers, designed by Luisom77 and printed it out. ( https://www.thingiverse.com/thing:4418072 ) I did so in PETG and regular infill. The pliers functioned OK, untill I needed them for something witch…

Downloads
471
Likes
69
Rating
5
P
PrintablesEA3D

Nema 23 Stepper Motor shaft D8 length 41-115mm

Stepper Motor Nema 23 length 41-115mm shaft D8

Downloads
465
Likes
9
Rating
0
P
PrintablesLIG Computer

Differential Gear W/Drive Shaft

This is an educational working model of a differential gear, frequently used in an automotive drivetrain. It's a lot of parts, so a lot of pieces to print. Provided are hi resolution STEP and STL files. (23) #6 x 5/8" metal screws and (1)…

Downloads
458
Likes
423
Rating
5
P
Printablesnicosandller

Coupler for dc motor / shaft - attachment

This coupler is 20mm in diameter on the flat surface that screws into the object being acted on and 5.8mm diameter for the shaft insert hole. Meaning your shaft should be less than 5.8mm in diameter.

Downloads
452
Likes
35
Rating
0
P
Printablesmathiaspl20

Adjusting Ring / Shaft Collar 8mm, 10mm M3

Adjusting Ring / Shaft Collar 8mm, 10mm using a M3 Nut and Bolt. Choose a 12mm bolt, 10mm may be sufficient. The 8mm one will fit around TR8 / T8 Spindle like shown in the picture. Print instructions Category: 3D Printer Parts Summary…

Downloads
448
Likes
21
Rating
5
P
PrintablesBuildModHack

5mm to 8mm Stepper / 775 Motor X Y Z Axis Tall Shaft Coupler / Coupling

Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…

Downloads
439
Likes
36
Rating
5
P
PrintablesPenaz

Spool Shaft for Flashforge Adventurer 3

Features: 4 slots main shaft with 30 mm (diameter) 19 mm (diameter) secondary shaft with 20 degrees inclination SUNLU SPOOL ADAPTER

Downloads
434
Likes
19
Rating
5
P
PrintablesEmil

Dart shaft M6 thread

Had a bunch of darts laying around with damaged shafts with M6 thread, different than your regular 2 BA thread. So I decided to make a replacement shaft for them.

Downloads
425
Likes
24
Rating
5
P
PrintablesLapelv

Arrow Nock for conic shaft ends (8mm)

I made this specifically to replace broken nocks on my 30 inch aluminium arrows by Man Kung ( https://www.mankung.com/webshop/bolts-and-arrows/detail/42/man-kung-30-inch-aluminium-bow-arrow.html ) but they might fit other brands, too. I…

Downloads
423
Likes
50
Rating
5
P
Printablestg73

Compact rod cutter attachment for Dremel flexi shaft

A compact attachment that screws onto a Dremel flexi shaft for cutting 5mm rod or tube. Use with a 38mm grinding disc or saw (saw not tested). I use it to cut carbon fibre tube. The two parts print in place without additional support.…

Downloads
418
Likes
92
Rating
5
P
PrintablesAdam Kimmerly

Arrow Shaft Yagi Antenna Bracket

This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…

Downloads
409
Likes
45
Rating
0
P
PrintablesMartyTheMcFly

Upgraded Output Shaft for The 4 Speed "Constant Mesh" Manual Transmission

This was my favorite manual trans that I could find online, to 3D print. But it isn't the smoothest. The crank was just a square, so the clutches rotate with it. Bu t the round holes for the output gears, through a square peg, made it…

Downloads
401
Likes
58
Rating
5
P
PrintablesNoel Holm

lego crankshaft for 3 cylinder engines (120°)

With this custom 120° crankshaft you can build a straight 3 cylinder or a V6 engine with an even firing order. for a complete crankshaft you need 3 custom 120° crankshaft pieces and 3 regular crankshaft pieces which you can download…

Downloads
397
Likes
15
Rating
0
P
PrintablesKLandy

Moza Shaft Cover

I designed this Cover for the shaft of my R5 base for storage. Simple design that prints easily, Recommend orienting with the text on the buildplate, designed to print without support.

Downloads
388
Likes
42
Rating
5
P
PrintablesClough42

Ball Bearing Axle Shaft for PolyDryer

This is a ball-bearing axle that fits in the Polymaker PolyDryer dry box to reduce the friction when feeding TPU and other sensitive filaments. I found that the cardboard spool on my Siraya Tech 85A TPU tended to hang up on both the…

Downloads
378
Likes
104
Rating
4.86
P
PrintablesBlazyst

Propeller for 2mm shaft motor

I made this propeller for a fan project (maybe coming soon ;) ) ! It's really blowing, not as much as a hurricane of course, but it's working ! It would be nice to see some makes ;) !

Downloads
377
Likes
12
Rating
4
P
Printablesstanis.lavv

Shaft Clip for Stand Up Paddle Board (SUP)

When taking a break from paddleboarding to swim or relax in the water, paddles are often left resting on the board. If not properly secured, they can easily slide away or be lost. These paddle retention clips are designed to keep the…

Downloads
371
Likes
40
Rating
5
P
PrintablesLittleSilvr

Stepper Motor Flag - Nema 17 (5mm Shaft)

I used Prusa-slicer to alter the original design by NotLikeALeafOnTheWind. I needed something that I could actually hold onto to stall the motor easily. Quick Print under 10 minutes.

Downloads
369
Likes
26
Rating
5
P
PrintablesBubonic_Bullet
Downloads
365
Likes
10
Rating
0
P
PrintablesTyler Bletsch

Customizable Shaft Buddy: A shaft coupler/adapter generator

Overview: This customizer can generate a shaft coupler that accepts a shaft (female) or acts as one (male) on either end for a variety of shaft shapes (hex, square, round (with set screws), and round with one or two flats). "Sleeve" mode:…

Downloads
363
Likes
25
Rating
5
P
Printablesagmcmll

Crossbow bolt fletching for 1/2" shaft - spiralize/vase mode

I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design. Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative. Upon searching I found a cool idea by Tal84:…

Downloads
360
Likes
60
Rating
0
P
PrintablesAustin

2-blade boat propeller, 2mm shaft

2-blade boat propeller, 2mm shaft

Downloads
359
Likes
13
Rating
0
P
Printablesdevvrat arya

BO motor shaft extender

Use this to extend Geared BO motor, that comes in cuboid package, the shaft will fit tight, also the tyre can fit tyre on the other side

Downloads
359
Likes
3
Rating
4
P
Printablesjimmiedave

Potentiometer Shaft Adapter / Extender (Updated 12/22)

My late Mom's old Panasonic table radio needed its volume control (with integrated power switch) replaced. The replacement parts would apparently be considered vintage now, but Philmore sells an appropriate value pot with an integrated…

Downloads
346
Likes
13
Rating
0
P
PrintablesMSB

Parametric Shaft Collar - Clamp Collar

This 2 piece clamping collar can be be customized in F360 to a wide range of dimensions. The geometry is tied to parameters for easy modification to suit the job at hand. It is made of two symmetric halves, so once you save the STL, be…

Downloads
345
Likes
30
Rating
5
P
PrintablesMario L

Dart shaft

Print several at a time. The design does not need additional supports. After printing, break off the tube that covers the thread. Print with a 0.4 nozzle, 0.12 layer 3 walls, 0% infill Use brim

Downloads
344
Likes
37
Rating
0
P
PrintablesBarebaric

Router bit holder for 6mm and 8mm shaft diameter

This model includes the following objects: A bar that holds router bits at an angle and that can be screwed or glued to a base plate. Lengths: 200 mm (7 bits) 250 mm (9 bits) 300 mm (10 bits) 340 mm (12 bits) A 6mm insert An 8mm insert I…

Downloads
343
Likes
95
Rating
5
P
PrintablesRainbowstrikes

Dremel Flex Shaft wall mount

There are two files, the first is the holder for the flexshaft handle, you can fix it to a wall with two screws or glue, the second is a clip for the shaft itself, you can print as many as you want, but i think one is enoutgh for holding…

Downloads
342
Likes
62
Rating
4
P
PrintablesHagyma

LEGO Technic Compatible Wheel Rim for 4mm D shaft

Lego Technic wheels (rim part number is 56145) to use with 4mm D shaft (4/3.5mm). This rims can be used with: Lego Tyre Normal Wide Ø43,2 X 22 (part number 4184286) Lego Caterpillar Tracks (part number 4502834) We can generate rims for…

Downloads
340
Likes
30
Rating
5
P
Printablesgnyman

Rubber band shaft for card shuffler

Edited the shaft so that it works with small ~1.5 cm (~0.6 inch) rubber bands. Works great. Thanks to @LukasCenovsky for doing all the hard work and then sharing the scad file to make this possible.

Downloads
333
Likes
30
Rating
5
P
PrintablesWhiteDragonD

Emitter Head/shaft rotation parts for Star Trek Discovery Phaser

Props show the emitter head and middle part, Discovery_Phaser_Mods_-_4_emitter_4, rotates. Did a quick part sketch using Prusa Slicer cylinders. This is why you have to open the 3mf file so the negative volumes will create the holes in…

Downloads
329
Likes
53
Rating
4
P
Printableszuim

Motor shaft adapter from 3mm (3.125mm) to 5mm

This is an adapter for 3.125mm to 5mm axles. To print it I recommend to start with default settings and increase/decrease flow depending on how well it fits (optimally it wouldn't have any noticeable play). There are three versions: Just…

Downloads
325
Likes
17
Rating
5
P
PrintablesAntimaterie

Rotary knob for 6mm D-shaft

I needed a replacement but all versions I found wasn't the real form factor I needed and that's why I created my own. There are 2 versions: knob_full.stl full knob for printing in one color knob_mc_base.stl knob_mc_indicator.stl…

Downloads
316
Likes
29
Rating
5
P
PrintablesEastMemphis

Ferrari 360 Crankshaft Locking Tool (Ferrari tool # AV 3207)

This crankshaft locking tool allows loosening and torquing of the crankshaft pulley bolt at the front of the engine. This bolt needs to be removed to perform the belt service. This tool should be printed with thick walls and at least 80%…

Downloads
315
Likes
6
Rating
0
P
Printablesraspbounty

Potentiometer Knob for 6mm Shaft

Pressure fit potentiometer knob for a potentiometer with a 6mm shaft Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3d Jake PLA Notes: Depending on the bedadhesion you…

Downloads
305
Likes
10
Rating
4
P
PrintablesvmLOGIC

6mm Push Rivet – Short Shaft Remix

This model is a remix of the original design by Avionix . Many thanks for sharing the model and making this remix possible. This remix introduces two small adjustments compared to the original model: The shaft length has been reduced by…

Downloads
303
Likes
83
Rating
5

OpenRC standard spur gear for 5mm motor shaft

If you'd like to start going even faster, take a look at our Advanced Aero Package video:

Downloads
301
Likes
25
Rating
4
P
PrintablesTurbonator

Comand Controller Shaft axis joystick for Mercedes E-Class C-Class W212 W204

It is so easy to find this shaft broken in the joystick pad of the mercedes E class and C class. You can print this one and save yourself $200.

Downloads
294
Likes
25
Rating
5
P
PrintablesSiff3D

Pastamatic Driving Shaft - Reinforced

The original driving shaft broke in the middle of the screw part. I printed it in PETG according to the instructions, but apparently the walls are too thin. So, I created a remix, which has a reinforced screw and the "top" end of the…

Downloads
293
Likes
28
Rating
5
P
PrintablesGonzoStrange

X-Maxx Basher Block (Center Drive Shaft Support Block)

X-Maxx Basher Block Center drive shaft support block for 6s/8s Traxxas X-Maxx Four versions... One that uses bearings and one that does not, with and without fluting for extra space to use grease. Bearings used are (Qty 2) R1212-ZZ - 1/2…

Downloads
278
Likes
31
Rating
5

Stepper Motor pointer for a NEMA 17 5mm shaft

A pointer for a stepper motor shaft. Used in initial testing of stepper motors. Category: 3D Printer Accessories

Downloads
278
Likes
10
Rating
5
P
Printablesgeodave

Parametric Shaft Coupler

I remixed my Parametric Rigid coupler from http://www.thingiverse.com/thing:964671 to create this. It is essentially the same as that, but I took out a couple of variables that were specific to its use. There are probably a few other…

Downloads
272
Likes
17
Rating
5
P
PrintablesMechano989

Z axis thrust bearing mount for Ender 3 or anything that uses a stepper motor with a 5mm shaft

I was looking around for something suitable to add thrust bearings to my Ender 3v2 and there was nothing that really suited what I wanted to do. Most of the ones that I've seen attempt to support the outside of the bearing and keep it…

Downloads
269
Likes
34
Rating
5
P
PrintablesCarl4D

Dart Shaft Organizer V2

Simple organizer for threaded dart shafts with standard 2BA threads. can hold up to 15 sets (15 sets* 3 shafts per set = 45 shafts in total ) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Downloads
268
Likes
23
Rating
3
P
PrintablesNellyBravo

Long Shaft War Hammer Weapon

the weapon was taken from our bad beaver collection.

Downloads
268
Likes
30
Rating
5
P
PrintablesGuilouz

FLSUN V400 Stock Shaft Cover

FLSUN V400 Stock Shaft Cover.

Downloads
264
Likes
44
Rating
5
P
PrintablesFin3dPrinting

Golf Practice Head-Fits real Shaft

I made the club bigger and made the hole to fit a normal golf club shaft. same setting as OG model.

Downloads
264
Likes
9
Rating
0