Search results: sic

Sort order

9,019 models

P
PrintablesPrusa Research

Basic Board + PSU Add-on Printable Parts

All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…

Downloads
12,656
Likes
420
Rating
4.88
P
PrintablesMalolo

Malolo's Silica Gel / Desiccant Containers

I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…

Downloads
11,400
Likes
2,050
Rating
4.94
P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Downloads
7,422
Likes
1,358
Rating
4.83
P
PrintablesTomek

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

Downloads
4,611
Likes
812
Rating
4.88
P
Printableskennyd1gital

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

Downloads
3,294
Likes
432
Rating
4.93
P
PrintablesPeter Farell

Meshy.ai Test. Classical Statue.

Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…

Downloads
3,045
Likes
665
Rating
5
P
PrintablesIsaacW

Desiccant Box

Update: 2024-02-25 – I added a new version of this model with a small lip around the edge, where the lid and body meet. This makes it easier to remove the lid, but still provides a nice snap fit like the original.…

Downloads
2,802
Likes
281
Rating
4.94
P
Printablesanimatorgeek

Improved Fast-Printing Screw-Top Desiccant Container (v2)

This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…

Downloads
1,968
Likes
464
Rating
4.95
P
PrintablesADAMCA.LAB

GoPro Mount (Basic Flat)

GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant

Downloads
1,942
Likes
188
Rating
4.95
18+

The source marked this model as adult content.

Downloads
1,862
Likes
491
Rating
5
P
PrintablesMatthias

Music Box "He's a Pirate"

Video: (I was spinning a bit fast, at x0.75 speed it sounds better in my opinion :) ) Material and Settings: All parts were printed with a Prusa MK3S and printed from PLA . The layer height was 0.3mm (smaller is of course always possible…

Downloads
1,621
Likes
584
Rating
2
P
PrintablesDesmodromic

Silica Gel Dessicant Container Funnel

This is a remix of gdrag's excellent Silica gel spool container cap / lid, modified with a large funnel to make filling easier. The funnel is twice the diameter of the container opening so it really helps to keep from spilling those…

Downloads
1,600
Likes
261
Rating
4.97
P
Printableshtkoca

Redux Bambu Lab Silica Gel Desiccant Tray - For New AMS v3

Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…

Downloads
1,579
Likes
127
Rating
4.91
P
PrintablesFokieH

Sichtlagerkästen / open-fronted storage bins Collection

Update 2025-03-04: Version 2 der Box S2 hinzugefügt mit Deckel und Trennwand. Außerdem Skadis- und Wandbefestigung für Größe S2 hinzugefügt. Text überarbeitet. Version 2 of the S2 box added with lid and divider. Also added Skadis and wall…

Downloads
1,437
Likes
468
Rating
4.88
P
PrintablesMetikumi

Functional Washers for PETG/ASA – Various Sizes – LR Basics

This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…

Downloads
1,373
Likes
252
Rating
4.8
P
PrintablesMetikumi

Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics

There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…

Downloads
1,361
Likes
148
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design

This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…

Downloads
1,033
Likes
64
Rating
5

Utility for training basic sailing knots

According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.

Downloads
857
Likes
167
Rating
5
P
PrintablesConr8r

Geodesic Greenhouse - Articulating PVC Joints

Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…

Downloads
786
Likes
513
Rating
4
P
PrintablesMultisystem

2021 (First Version) MiSTer Multisystem classic gaming console 3D Printed enclosure design

Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…

Downloads
755
Likes
30
Rating
5
P
Printablesnem

Small compact sliding desiccant box

A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)

Downloads
714
Likes
213
Rating
5
P
PrintablesMichal

Silica Gel / Desiccant Containers

Silica gel / desiccant containers to help You store Your filaments in dry conditions. This is a remix of Malolo's containers, main differences are lid which now contains slot for a hygrometer and reworked container heights. In differences…

Downloads
679
Likes
149
Rating
4.89
P
PrintablesTronnic

Charging Stand for Samsung Galaxy Watch 6 Classic 47

A fancy charging stand for the Samsung Galaxy Watch 6 Classic 47mm! It might work for other versions or watches as well, but I didn't test that! The diameter of the charger-hole is 29.5mm I added a piece of 1mm thick sticky foam where the…

Downloads
653
Likes
51
Rating
4.4
P
PrintablesJustin

Silica Desiccant Container (fits inside spool)

Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…

Downloads
636
Likes
79
Rating
4.7

Which Ball Will Win? Gravity Physics Experiment

What the video below to see it in action! Use a pen to hold the 2 balls/marbles/bearings for a clean start and watch the bumpy road win! Ball size/weight/starting position/layer height all affect results. I used ball bearing and practived…

Downloads
612
Likes
147
Rating
5
P
PrintablesAllpa

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

Downloads
599
Likes
135
Rating
5
P
Printablesantonio2709

Classic Chess Set – Parametric Design (FreeCAD) - -ajedrez

Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…

Downloads
563
Likes
28
Rating
0
P
Printableszuberio

Super Desiccant Jar (Vase Mode)

50mm diameter by 70mm tall desiccant jar (with screw on lid) that prints fast in vase mode and has TONS of air flow. There are even interior channels that allow for air from the perimeter to penetrate into the middle of the jar for…

Downloads
535
Likes
185
Rating
4.88
P
PrintablesNikki

Classic Lantern

Another lantern model. Illuminate with an electric candle. Enjoy! Supports are needed for the top piece. Windows are a two color print.

Downloads
510
Likes
162
Rating
5
P
PrintablesMakerwiz

Elegant Geodesic Planter

0.2mm layers 10% infill Only the bottom part near the bed surface needs some support.

Downloads
479
Likes
110
Rating
5
P
PrintablesDaveDude

Müllbeutelrollenhalterung (Gelber Sack, k-classic Müllbeutel) - German Trash Bag Holder for Bio, Yellow, Black and Bathroom

This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…

Downloads
474
Likes
75
Rating
5
P
Printablesmarkaabo

Festival / Music Concert - Wristband Clip

Do you need a clip that's not only reusable but also better than the original onces? Well then this is perfect for you, this reusable/adjustable wristband clip. it's designed to be easy to use and comfortable to wear! How to use: To use…

Downloads
423
Likes
60
Rating
5
P
PrintablesAinon3Dtisk

Classic wooden slingshot

Hello, Welcome to my profile, full of models and miniatures :-) I have a Classic Wooden Slingshot for you. It is really authentic and shoots well with it. To assemble you need a rubber band and some leather to catch the projectile. You…

Downloads
398
Likes
133
Rating
5
P
PrintablesEl_Gato

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses / Fuse puller

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…

Downloads
370
Likes
24
Rating
5
P
PrintablesGajdy

Classic Clamp Fully Printed !

I have designed and created a classic clamp specifically intended for hobbyists, particularly those involved in activities like modeling and crafting. What sets this clamp apart is its unique construction and functionality, catering to…

Downloads
356
Likes
54
Rating
0
P
PrintablesPatricio

Classic Chess King

This is a beautiful classical style chess king designed with FreeCAD, with no compromise regarding supports. The original dimensions of the piece are 36 mm (≈ 1 27/64") diameter and 92 mm (≈3 5/8") height, but you can rescale it as…

Downloads
345
Likes
11
Rating
5
P
PrintablesCheruTijntje

Gaggia Classic - Steam handle

Steam knob for Gaggia Classic pre-2015 model with 6 mm hole with flat side. It is a very tight fit, just push on hard! The flat side is internally reinforced.

Downloads
323
Likes
27
Rating
5
P
PrintablesMortalWombat

Vase Mode Desiccant Box

I'm finally moving away from gallon ziplock bags and storing my filament in 20qt Sterlite gasket boxes. I needed a bunch of (at least a dozen) desiccant boxes, and while there's tons of models out there, they're not exactly efficient to…

Downloads
322
Likes
55
Rating
4.89
P
PrintablesBTuck

Filament spool desiccant cylinder

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…

Downloads
313
Likes
44
Rating
5
P
PrintablesPowaqqatsi

Music Staff Pen

Creating a music staff, or other crazy shapes, is easy with this five lined pen. Uses five Bic ink cartridges from Round Stic M pens. Two designs are currently available, a minimalist version which does not enclose the ink cartridges, and…

Downloads
295
Likes
192
Rating
4.5
P
PrintablesDr White

Classical Passive Filament Tracker

🎯 Keep an eye on your filament — the smart, simple way! The Passive Filament Tracker is a purely mechanical tool that visually shows the estimated filament used and the remaining amount on your spool. No wires, no batteries — just mount…

Downloads
292
Likes
144
Rating
4
P
PrintablesAlpino76

Musicman stingray bass thumb rest

30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.

Downloads
292
Likes
10
Rating
4.5
P
Printablesmkoistinen

Whimsical Dodecahedron Lamp - Siri/HomeKit Enabled!

We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…

Downloads
282
Likes
116
Rating
5

Geodesic Dome / Greenhouse

Social Media: https://linktr.ee/storknestprojects Components: about 100 threaded rods - M10 about 300 nuts - M10 about 10 wooden panel boards a roll of 30m x 1,5m greenhouse foil 7 rolls of greenhouse tape (8cm x 15m) Updates: 06.04.2023…

Downloads
269
Likes
160
Rating
0
P
PrintablesSchraubaer

Fahrrad/E-Bike - Bremssattel-Transportsicherung

Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG Perimeter hatte ich auf 4 gestellt für die Stabilität.

Downloads
259
Likes
22
Rating
5
P
Printablesonus

Basic - Tapered Candle Mold - 6in

Pretty basic idea: 6in Tapered Candle Mold. Just print both halves, bottom up with organic supports - to hopefully produce as smooth a mold as possible. Should produce a tapered candle about 6 inches long with a ¾ inch base. I'll post…

Downloads
258
Likes
31
Rating
5
P
PrintablesMetikumi

Wooden Dowel Replacement - Various Metric Sizes (LR Basics)

Here is my design of straightforward replacements for wooden dowels. I created them for the FFF process to print them using PLA or PETG material. If these dowels are printed with the described settings and in the correct orientation, they…

Downloads
246
Likes
22
Rating
0
P
PrintablesBTuck

Filament spool desiccant cylinder V3

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…

Downloads
243
Likes
24
Rating
4.86
P
PrintablesMetikumi

Print in Place Hinge – PETG/ASA – Medium Strength 200 - LR Basics

This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a medium-strength design with the series number 200. Two 80mm length hinges of this design will…

Downloads
233
Likes
26
Rating
5
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Downloads
213
Likes
64
Rating
5
P
Printableszuberio

Geodesic Dome Hubs (3mm Dia. Bamboo Skewer Style)

My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…

Downloads
195
Likes
42
Rating
5
P
PrintablesBuildComics

Shaker Ball Half Spheres With Thread for juggling/music

Originally designed by Guido van Hout, slightly remodelled with coarser threads and chamfered inside/outside to reduce overhang and seam size. Prints in 0.2mm but nicer in 0.15mm. Female side needs to have a brim otherwise your chamfered…

Downloads
192
Likes
17
Rating
0
P
PrintablesMetikumi

Classic Curved Flower Pot with Thick Vertical Decorations

Drawing inspiration from the grandeur of Roman vases, I've crafted this classic curved flower pot to bring timeless elegance to your garden or indoor space. Its wide and graceful silhouette is adorned with thick vertical rounded lines…

Downloads
177
Likes
95
Rating
0
P
PrintablesMetikumi

Functional Corner Brackets for PETG/ASA - LR Basics

This is my design of fully functional corner brackets. I created them especially for the FFF process to be printed using PETG or ASA material. If these corner brackets are printed with the correct settings and materials, they can…

Downloads
173
Likes
40
Rating
0
P
PrintablesLubos

Classic Dinner Plate

Classic plate for kids kitchen. Colour strip is nice addition for plate. Easy to print. No supports needed.

Downloads
169
Likes
10
Rating
0
P
PrintablesErikSi

027 Vorsicht: Spielende Zahlen! Pythagoras

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Downloads
160
Likes
38
Rating
4.75
P
PrintablesErikSi

187 Vorsicht: Spielende Zahlen! Pi-Day

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Downloads
158
Likes
26
Rating
0
P
PrintablesMikel

Bigger Better Basic Clip

A more robust bag clip design than my (Very) Basic Clip. Thicker walls, wider, longer, and reinforced at the top of the clip.

Downloads
157
Likes
26
Rating
5
P
PrintablesApfelhobbit

Dessicant container for Ikea drybox (Samla 22L)

Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files

Downloads
157
Likes
16
Rating
0
P
PrintablesEsau Labs

Easy Classic Clothes Pin

Material: PETG Print Settings: 0.2mm Layer Height 4 Perimeters

Downloads
149
Likes
13
Rating
4.67
P
PrintablesErikSi

053 Vorsicht: Spielende Zahlen! Winkelmesser 2

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Downloads
147
Likes
38
Rating
4.5
P
PrintablesThommyfix

Geodesic Dome as a Greenhouse for micro Garden

A small Geodesic Dome with 18cm diameter as a greenhouse for a micro garden or other cover. There is additionally also a variant from the frame without walls. The closed variant has a "print in place" flap on the roof. The models are…

Downloads
144
Likes
21
Rating
0
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Downloads
144
Likes
55
Rating
0
P
PrintablesMordiev

Desiccant Dome

Deprecated as of 1/11/2024: I have no longer use or recommend this model. This is what I use now. This model was great when I lived in Colorado it was all I needed because it only got humid when it would rain. But after I moved I found I…

Downloads
141
Likes
22
Rating
5

Teschio Messicano - Mexican Skull Silhouette

Silhouette Teschio messicano da incollare al muro. Misure: 16,3cm x 11,3cm sp.3mm Stampato in PLA

Downloads
141
Likes
12
Rating
5
P
PrintablesMetikumi

Classic Tray in 120 Sizes with Optional Feet

This is my design of a classic tray with a slightly sloped border. I made it to be used as a flat tray or with four feet to raise it somewhat over the surface. How to Print the Knob In the file section, you will find an example project…

Downloads
141
Likes
24
Rating
5
P
PrintablesAinon3Dtisk

Guitarist, musician Jimi Hendrix

Hello, Welcome to my profile, full of models and miniatures :-) I have Jimi Hendrix for you - a great world guitarist and excellent musician. Unfortunately, this print is quite complicated and I didn't succeed at all :-(... I hope you…

Downloads
139
Likes
14
Rating
0
P
PrintablesCarlos Luna

Sicherman Dice

A pair of 20 mm Sicherman Dice (see: https://en.wikipedia.org/wiki/Sicherman_dice ) with sides: 1, 2, 2, 3, 3, 4 1, 3, 4, 5, 6, 8 I attach the parametric OpenScad file, so you can modify the design. It includes a module that allows you to…

Downloads
138
Likes
9
Rating
5
P
PrintablesFalk

Drehknopf Türverschluss Hager Sicherungskasten System 90 SL

Ersatz Drehknopf Türverschluss Hager Sicherungskasten System 90 SL. Wurde aus PLA mit 100% Füllung gedruckt. Sieht nicht wie das Original aus und lässt sich auch nicht einklappen.

Downloads
135
Likes
8
Rating
5
P
PrintablesMetikumi

Functional Angle Brackets for PETG/ASA - Various Sizes - LR Basics

This is my design of fully functional angle brackets. I created them especially for the FFF process to be printed using PETG or ASA material. These prints require a well-calibrated printer and high-quality filament to be functional. If…

Downloads
134
Likes
21
Rating
0
P
PrintablesMelodicCougar7

Tabletop Table: A Simple, Basic Table For Your Favorite RPGs

This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…

Downloads
128
Likes
43
Rating
5
P
PrintablesPeter Farell

Lady Jessica / Bene Gesserit

Lady Jessica / Bene Gesserit

Downloads
123
Likes
35
Rating
5
P
PrintablesMocca55

Protection Kit / Sicherheitsrahmen Icom IC607mk2g

SicherheitsRahmen für das Icom IC706mk2g Amateurfunkgerät. Um dieses beim Transport vor Schäden zu schützen. 2 Teile müssen gedruckt werden und man benötigt 4 Senkkopf Schrauben M5x12 um die Teile zum montieren.

Downloads
122
Likes
12
Rating
0
P
PrintablesBoomerguy

Classic scratcher tip for Scratch Attach!

A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.

Downloads
120
Likes
8
Rating
5
P
PrintablesVladimir Kafka
Downloads
117
Likes
34
Rating
5
P
PrintablesSweet1227

Dry Box Dessicant Shelf for Cereal Box

I love Prusament, but got tired of the dessicant balls getting stuck in the Prusa Hexes on the spools. I have regular kitchen cereal dry boxes and used to keep the bottom filled with dessicant. Now this shelf separates the spool from the…

Downloads
116
Likes
19
Rating
4.5
P
PrintablesMordiev

Desiccant block for Rubbermaid drybox

This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…

Downloads
114
Likes
27
Rating
5
P
PrintablestheOstrich330

Hot Wheels Basic Display (CUSTOMIZABLE NOW!) ('91 Mazda MX-5 Miata)

This was the car that initiated my hotwheels collection. I thought it deserved a basic display in order for it to stand out from the rest of my collection. I tried to keep it basic so it wouldn't take the focus off the car. ---UPDATE--- I…

Downloads
95
Likes
37
Rating
0
P
PrintablesSheepMe!

"I love Music" Plant Climber

It is said that plants respond to music, they even grow faster when they hear music. We also love music, so why not show it and help this little plants grow. It can be printed without supports. If it is for the garden or for the flower…

Downloads
94
Likes
27
Rating
0
P
Printablesrangerer

Musical Clef Symbol Coasters

Prints should start with black and change to white just above the 2mm layer, then back to black just above 3mm. Color changes are configured in the print and model files. On Prusa MK3S, I was able to print two coasters at a time.

Downloads
85
Likes
21
Rating
5
P
Printables3DMAC

AC Sparta Praha kasicka

Kasička ve stylu fotbalové AC Sparty Praha. Print instructions Tisknuto na MK3 nejsou potřeba podpory snižte rychlost tisku při tisknu částí se závitem

Downloads
84
Likes
8
Rating
0
P
PrintablesPedro Denofrio

Indian Chief classic end throtlle Indian motorcycle

Use in the end of throtlle and be happy

Downloads
80
Likes
10
Rating
0
P
Printables3dprinterkid

Rounded Silverware Organizer (Basic)

Warning When printing from the STL Scale to 2500% (I am unsure how to rescale). This is a basic 3dmodel that I am uploading I am very new to fusion 360 I hope you enjoy.

Downloads
79
Likes
3
Rating
0
P
PrintablesMartin

Basic El. Circuit Stencil

Simple Electric Circuit/Diagram Stencil/Template It is really simple template to make electrical diagrams and circuits. It takes only 5 minutes to print. And it has less than 1 gram of weight. Look at my example of simple electric diagram…

Downloads
77
Likes
18
Rating
0
P
PrintablesStrayCat

Halteclip für Qeridoo Babyschale + Hängematte mit Sicherheitsschale

Im G-Code wurde eine Druckpause hinzugefügt um den vorhandenen Gurt in den noch offenen Bügel einzusetzen.

Downloads
76
Likes
5
Rating
0
P
PrintablesMike81622

Multicolor / Twotone Basic Board Cover - NO MMU! - Original Prusa Enclosure

I wanted the text and the buttons to be more visible, as I always had a hard time finding the buttons in the evening when there's just the enclosure light turned on. I wanted to do it with two different colors along with the black base…

Downloads
74
Likes
20
Rating
5
P
Printableszxb466

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

Downloads
74
Likes
23
Rating
5
P
Printablesbeu3D

Krückenverbinder für Rohrdurchmesser 22 mm, lehnen sicher an der Wand

Der Krückenverbinder verhindert das Umfallen der Krücken, wenn sie an die Wand oder an den Tisch gestellt werden. Der Verbinder bleibt am Stock, der andere Stock wird eingeklipst.

Downloads
70
Likes
11
Rating
5
P
PrintablesApheli0n

Sicherungsstift zu Schubstange / safety pin for push pole for BIG Bobby Car

I got this Bobby Car incl. push pole from a friend, but the safety pin was missing. Perfect chance to test my new 3D Printer! After looking online what the pin looked like I took all measurements and began modeling a 3D printable…

Downloads
65
Likes
3
Rating
5
P
PrintablesBen

Prusa Core One Spulen Sicherung

Mir sind ständig die Spulen vom Standard Spulenhalter gesprungen sobald sie weniger Material drauf hatten. Mit der Sicherung passiert seit dem nichts mehr. Sie ist einfach nur drauf gesteckt und kann ebenso mühelos wieder entfernt werden.

Downloads
63
Likes
16
Rating
5
P
Printableswolf gore

elite inner classic pro

Este cover decorativo fue diseñado específicamente para ser compatible con la serie Cooler Master Elite Liquid Series, ofreciendo una forma simple y efectiva de renovar la estética del bloque sin modificar su funcionamiento original. Él…

Downloads
63
Likes
35
Rating
5
P
PrintablesOyo Oyo

Hand Spinner Classic

Ecrous bas HM 10 (pour clé plate de 17) Roulement type RC d5xd11 ép.4

Downloads
62
Likes
5
Rating
0
P
PrintablesNeonBlitz

Halloween Kürbisgesicht 2D Fensterdekoration

Fensterbild in 2D für Halloween zum anhängen am Fenster Gedruckt in PLA Wenn sie verbesserungsvorschläge haben können sie mir die gerne mitteilen. Die STL hat keine besonderen Einstellungen. Die Datei dient lediglich nur zur Anschung…

Downloads
62
Likes
8
Rating
0
P
PrintablesPanJaster

Key marking tool (classic FAB key)

Simple key marking tool to recognize your keys

Downloads
62
Likes
12
Rating
5
P
PrintablesVisualReversal

Basic Board Cover for Original Prusa Enclosure (OPE) - No MMU

The single color version of the basic board cover is great except for one thing; you can't see where to poke it to turn on the fan and light when the room isn't super well lit. So, I decided to make a non-mmu multi-color version. And,…

Downloads
61
Likes
6
Rating
5
P
PrintablesDominik Pechac

Pouzdro (kapsa) k roštům Duoflex, Duostar, Primaflex, Daniel, Klasic, držák na lamely

Náhradní pouzdro (kapsa) pro lamelu o šířce 36 mm. Pouzdro je určeno pro rošt rámu menší než 100 cm. Rozteč děr pro kolíky je 65 mm. Kapsu lze použít k velkému množství roštů, většinou o počtu 28 lamel. K příkladu uvádíme: Primaflex,…

Downloads
58
Likes
9
Rating
0

Tripodium for classical guitar

UPDATE (February 2025): Step and Fusion files added to allow adaptation to other guitars and tripods. Play classical guitar with extra projection. Alternate between a sitting and standing position when playing for an extended period of…

Downloads
55
Likes
10
Rating
0
P
PrintablesZeugi

Schild Vorsicht Dachlawinen

Schild Vorsicht Dachlawinen. Mit und ohne Löcher.

Downloads
53
Likes
5
Rating
5

Caster gauge for classic Mini ("Mini Cooper")

To measure the caster angle of a classic Mini, when stood on a reasonably smooth floor. See https://www.theminiforum.co.uk/forums/topic/360471-using-caliper-bolts-to-measure-castor-angle/#entry3761930 for full details of how to use. NB:…

Downloads
52
Likes
3
Rating
0
P
PrintablesLogan

Notenständer Schutzkappe für Fuß / music stand

Eine einfache Schutzkappe für den Notenständer damit er nicht so schnell im Kies einsinkt und das Parkett zerkratzt ;-) Die Schutzkappe ist zum aufstecken, kann aber auch verklebt werden. Die .f3d Datei kann für euren Notenständer…

Downloads
52
Likes
10
Rating
0