23 models
8040 extrusion cockpit mount for SimJack Control box. You can print just 1 but 2 work better.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
.2mm layer height, printed in PLA worked fine, extra walls is nice ~4 walls
Seeing the new Fanatec podium pedals with the fancy heel cups made me want some, however they don't exist for sale yet. I also didn't want to spend like 2k AUD on Simgrade VX pros when I have a 3d printer and some stubbornness along with…
Sequential Shifting adapter for Simjack H Pattern Gear Shifter Something came in the package to do similar, but it wasn't well measured so did not work well, so here's one that works better. Key features: Able to be installed WITHOUT…
Print at .2mm layer height, %15 infill. 4 mounting holes for simjack hardware with washers that mount through the bottom. 2 holes for mounting bracket to 8020 simrig
Printed Parts: 3x Spring Spacer 1x Spring Base (I'd recommend using PETG) Bought Parts: These cost about $15 CAD total on Aliexpress 1x 70mm 25mm OD Die Spring (Red) 1x 30mm 25mm OD Die Spring (Yellow) Feel free to try different colour…
Printed with PLA. Use supports on the Spring Adapter stl. I recently upgraded my Simjack UT pedals using the Heusinkveld Ultimate+ Upgrade Kit ordered from Trakracer in Canada. After placing my order, I realized additional hardware was…
Why? Because of the unusual mounting holes in the H-shifter from Simjack, I made a version of the mounting for a 30x30 mm. Slides in typical 3030 aluminium profile. Using M6 Mount holes for Simjack H Shifter and M6 bolts on the sides.…
Materials: 2x Dayton Audio TT25 12x M3x4x8 heat insert 12x M3x10mm bolt 6x zip ties for strain relief Assembly is quite simple: Install heat inserts into mounts Unbolt pedal spacers Slide spacers into mounts Attach TT25 to mounts Zip tie…
A simple case to hold the Simjack Ultimate controller. It takes a M5 bolt (and possibly a nut) to affix it to your rig. Some support is necessary to print the cover part
Bigger pedals for Simjack. For use with socks very smooth. The brake needs to be heated a bit so it can be formed in the shape of the original brake pedal. Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Rafts:** Doesn't…
Footrest for the throttle pedal of the Simjack Pro pedal set. Hardware required: 3x M3x5x4 brass heat inserts 3x M3x8mm cap head bolt NO HARDWARE REQUIRED for the one piece version. Printed in 2 parts, ‘Footrest’ requires supports. I…
This is the size for the throttle, I made for the 30x20x10 springs
This is a replacement gearplate for the SimJack H-Shifter , redesigned for added durability . Original acrylic plates were prone to breaking, especially when accidentally shifting into reverse Scanned the original plate and reinforced one…
After getting a sequential shifter, it felt like the base handbrake handle wasn't long enough even after moving it up far as possible with the wood sections it came with. You only need two holes with screws in it to lock it down, so as…
Playseat challange x (should work for standard version also) mount for simjack handbrake HE002 This remix also allow to use shorter screws than original - now you can use M4x20 or M4x16 For mounting it to playseat challange you will need:…
This mod is for using a RC car spring like 1:10 touringcar hop up spring, I had extra from a Tamiya car that I used. I wanted my brake to feel like a normal car brake where there is some slack before you hit the hydraulic resistance, this…
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
Sequential Shifting adapter for Simjack H Pattern Gear Shifter Something came in the package to do similar, but it wasn't well measured so did not work well, so here's one that works better. Key features: Able to be installed WITHOUT…
.2mm layer height, printed in PLA worked fine, extra walls is nice ~4 walls
