159 models
New version of the tray for the Skywatcher EQ6 R Pro mount, more rigid and with grooves. This tray can be mounted on any mount with a 2" diameter tube and an angle of 56°, to maintain horizontality. To prevent rotation on the polished…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
see the update at the end. Supports for the EQ6 R pro . Tested on soft ground (sand ground and grass), ceramic floor with relief and sandstone floor, improving stability, accidental slippage and preserving the ceramic floor. Optionally,…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Auxiliary tray for the SkyWatcher EQ6 R pro mount. See: https://www.printables.com/es/model/304688-new-tray-for-the-skywatcher-eq6-r-pro-mount In case it can be useful, I leave you this tray, adapted to the tripod of the EQ6R pro. It is…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
I created an aid to help with rough polar-/daytime polar alignment for the Skywatcher Star Adventurer 2i. simply replace the batterie cover with this 3d printed version, put the phone in the phone holder and run software like “PS Align…
The is my version of an Bahtinov Mask (created with AstroJargon) for my Skywatcher Teleskop N 150/750 PDS Explorer BD OTA. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Using the same dimensions as the standard Skywatcher dustcap. The .stl is completely manifold and thus perfectly printable. tested settings with PETG: layer height: 0.3mm 2 perimeter shells infill: 20% no supports needed
It is very well fitted to the evoguide 50. not too loose not too tight, just right.
This very simple LED fixture makes the reticle in a polar scope visible when aligning a telescope in the dark. You will need to physically dim the LED, for instance by covering it with nail polish. Features battery compartment also acts…
WARNING: NEVER LOOK DIRECTLY AT THE SUN THROUGH A TELESCOPE, BINOCULARS OR WITH YOUR UNAIDED EYE. This is a tool for a known problem: If your telescope has a sun filter (and it must have a sun filter for looking at the sun!), you can't…
Idea A simple way to secure the tripod legs with velcro straps because they always tend to flop around uncontrollably. Design This is my first design done in Fusion 360. The original design I used as a reference had lots of supports to…
They fly now? They fly now. I hope you have some arrows or are adept with the shield parry. If you are sneaky you can one-shot them with an ancient arrow to the top eye symbol. Or just the regular eye. This model is nicely over-engineered…
Adapting EQ5 (SkyWatcher) telescope mount or similar types to OnStep goto controller , by Howard Dutton project. Accessories recommended OnStep Mini 2.0 Cotroller and Box on base MiniPCB2 and Teensy3.2 or OnStep STM32 Controller and Box…
Easy way to mount Power Supplies, Small PCs, Focuser Controllers, Dew Heater Controllers or anything with a flat side. Print vertically for extra strength around the clamping face, using 15% infill with PETG. Will work on tripod legs…
Was searching on the internet if there was an Polar Align mount which fits around the AZ GTI, and can hold a phone next to it parralel. There werent any. So i made this model, which fits around the house of the AZ GTI. On the side you can…
Customized version of https://www.thingiverse.com/thing:3968935 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3968935 Instructions Using the following options: focalLength = 420 aperture = 83 capDepth =…
To attach a angle finder to the polar scope on SkyWatcher Star Adventurer and similar. The Sky Watcher Polar Scope Pentax Spotmatic.stl can be replaced by your own design so it fits your angle finder. This one fits the Pentax angle finder…
I didn't like the holder for the Synscan that came with my EQM-35, so I designed my own by taking inspiration from the motor controller holder (that also came with the mount). It's made for Skywatcher's steel tripod that comes with EQM-35…
This remix corrects a small bug where a curve in the finder mount obstructs the lip of the telescope (lordzurp is aware and is updating). BUT the real reason for it is to add a larger mount for a Crayford 1.25" focuser - 71mm base plate…
The factory 5lb counterweight included with the GTI is to heavy to properly balance small payloads. This model, filled with small rocks, weighs in at 647g your mileage may vary. Required materials. 4x M4x25 socket cap screw (mine have a…
A top bracket / plate designed to hold accessories like the asiair on my skywatcher evostar ED72 telescope tube rings. The ring spacing is 120mm and designed for the ¼ // M6 through bolts, the nut insert is m6 standard size. The risers…
A bajtinov mask for the skywatcher Evolux 62ED. Printed in Prusament PETG on MK4 using Prusament PETG profile / 4 walls.
Skywatcher Newtonian 8" (200mm) 1200mm main Mirror Mask for "hiding" the mirrorclamps and get better starts print it with 100% infill and paint it in the mattest black you can find. dont overtighten the mirrorclamps to not get…
Tapa trasera para Skywatcher 200PDS / Rear cover for Skywatcher 200PDS Spanish : He diseñado este conjunto de piezas para la parte posterior de mi skywatcher 1000/200PDs con tres objetivos: 1- Evitar la entrada de luz posterior. Aunque mi…
This is just a very simple pad you can put under your tripod legs to protect your floor from the metal studs.
Design This dew shield / scattered light protection was designed for a Skywatcher 150 PDS (150/750 f5) but should also suite for a 150 P or even a 150 Quattro (f/4) as the diameter don't change between this models. The shield rests on the…
Cover plate to avoid a light leak on the main mirror cell
Idea This model's idea is a rebuilt and (hopefully) improved version of: https://www.thingiverse.com/thing:3964197 While I liked the original model and for this version used most of its measurements, I had a few issues with it and even my…
I have designed this model to attach a green laser to my Skywatcher Star Adeventurer and make easy to find the polar. My laser dimenssions are 152mm long and 22.5mm diameter (aprox). Now, it's easy to me finding the polar when I use my…
Bathinovmask for Skywatcher 8" Newton Telescope
It is recommended to add an aperture mask to cover the rubber holders. These protrude into the mirror surface area what you can see in the diffraction spikes on bright stars. Printing: ~ 25 grams, Nozzle 0.4 mm or 0.6 mm (usually faster),…
Print settings: Material TPU No supports Suggested layer height 0,2mm
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
For modeling purposes. Don't use plastic to hold astronomic equipment.
Bahtinov mask for Skywatcher EvoStar 150mm ED 150/1200 refractor telescope Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights.…
Bahtinov mask for Skywatcher StarTravel 120mm 120/600 refractor telescope Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights.…
Skywatcher 150p Virtuoso secondary mirror holder with 58mm spacing between bolts for focuser. Maybe you can edit it for your focuser. For the secondary mirror you can use 3 heat inserts and the original hardware from the stock secondary…
Standard manual adjustment knobs from skywatcher are crap that breaks as soon as you apply some force to it, so I've designed a better one that has snug fit from the beginning and then it also allows for a lockdown with a m3 bolt screwed…
For travel and transportation I put my EQ5 tripod in a slightly padded tripod bag. After a few flights, I saw that the pin on top of the tripod had damaged the bag from the inside. This cover protects the tripod top and the bag. It it…
Bracket to hold Skywatcher EQM-35 tripod legs apart and rigid for transport. Should fit any tripod with 1.75" diameter legs. STEP file provided for much better surface finish if your printer and slicer support curves.
Bahtinov mask made with AstroJargonMG generator for Skywatcher Esprit 100 APO. Printed with Esun pla+ 0.2mm layer height. Added 4 pieces of felt with double sided tape for secure fit and no scratching.
Design The tube end ring is combined with the secondary mirror spider. The mirror holder is centered by design, it is not possible to adjust the center position of the mirror holder and therefore the mirror. The standard secondary mirror…
This is an adapter for the Skywatcher Star Adventurer GTI saddle mount. It adapts the 29mm by 29mm screw pattern to 38mm by 38mm. This allows to mount an aftermarket saddle with a better clamping mechanism. The fit for the M4 nuts should…
Remixed the main button so it can be installed on a Skywatcher Crayford focus button. If you want really smooth operation, check out the anti-wiggle needle mod here:…
Printed without support. FLEX / layer 0.2 / perimeter 4x.
Pier adapter for my EQ6 mount, 3D print possible, but for more robustness, I made it on CNC in aluminium.
Design The tube end ring is combined with the secondary mirror spider. In my opinion, it makes no sense to screw on the tube end ring and also the spider for a 3D-printed part. The mirror holder is centered by design, it is not possible…
Counterweight shaft adaptor for Skywatcher 18mm counterweight bars and Skywatcher counterweights with 20mm bore. Copied from the original part. Compatible mounts: AZ-EQ5, HEQ5, EQ6, EQ6-R, etc. Print Settings Printer Brand: Prusa Printer:…
I created this bracket to fix a Omegon dew controllerbox to the tripod of a Sky Watcher EQ6-R equatorial mount.
Knob for Skywatcher HEQ5 Pro RA and DEC Axis Category: Hobby
The strings are used from commonly available AA battery holders. They are fixed in the holder with rivets.
The standard eyepiece holder on most Dobsonians on the market are designed for the stock eyepieces that come shipped with the telescope. If you want to use better eyepieces, chances are you won't be able to fit them in the existing holder…
To allow for a faster setup and wrap up, it is tempting to leave the pier head attached to the mount, and leave the pier attached to the tripod. But that leaves the three thumbscrews potentially loose and exposed. The TopPack_V2 (white)…
Dovetail for Skywatcher Maksutov 90/1250 to EQ-3 mount This dovetail was made specially for Skywatcher 90/1250 MC telescope and Skywatcher EQ-3 (EQ3-2 too) mount. I mean, I don't know if it fits other telescopes and mounts of other…
This holder clamps on Skywatcher's steel tripod legs and offers a place to store the battery during use. It's made for Skywatcher's steel tripod that comes with EQM-35 mounts and above. Those USB-C PD power tanks can provide up to 12V at…
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits my 150mm Skywatcher 150pds tube. Depending on padding material used, you might need bigger or smaller ring-diameter, but even…
Perfect your astrophotography with our Bahtinov Mask for Skywatcher 130 PDS. Achieve precise focus on celestial objects, ensuring stunning results. Elevate your star-gazing experience by eliminating guesswork. Upgrade your telescope setup…
Same printing instructions as the original. No supports needed, print vertically for best strength.
I printed mine in PLA, 20% infill and supports.
Found on a forum with no responses to share - want to share with the world. EQM35 Belt Mod. I’m using the standard EQM35 motor controller with no changes made to EQMOD settings. The aim of the exercise was to achieve the same ratios as…
This is an upgraded knob attachment for the Azimuth adjustment screws on the Sky-Watcher EQM-35 Pro telescope mount. This should allow more torque and finer adjustment for polar alignment. Remixed from:…
When a main mirror mask is attached to the main mirror, the area between the rubber holders is lost. To reduce this area, it is necessary to print a redesigned mirror holder made of TPU with a smaller holder pad. One of the pictures shows…
I am owner of a Skywatcher Heritage 130p. Since I live in the city and like to use the telescope from the balcony, I wanted to protect the telescope mirror from stray light. I looked at some solutions in the relevant forums, but I wasn't…
Simple cover for skywatcher newtonian telescope 150 mm (6") for use after colimating. Printing About 100 grams, PETG recommended, Nozzle 0.6 mm, Layer height 0.3 mm (even with a bambulab nozzle I can print PETG on nozzle 0.6 mm with flow…
It easily fits on the Skywatcher EQ mount counterweight knobs as shown in the pictures, you can also put a nice chunk of hot glue in there and mount it permanently. I don't know if it fits other brands too. I also included the Fusion file…
When using the EQ6R Pro mount in a fully automated setup, there is a risk the cables get caught on one of the handles. This is a big problem with fully automated setups, that run unattended through a whole night (possiblity with a…
Capture the cosmos in perfect focus with our Bahtinov Mask for SkyWatcher 250 PDS. Elevate your astrophotography game by achieving precise star focusing. Upgrade your imaging setup and unveil the beauty of the universe. Perfect your…
I find the screw-in cap supplied with the ED72 to be very fiddly. Needs absolutely precise orientation. So I designed a slip-on cap. Ideally print this with TPU filament, as it is intended to be a snug fit, and the TPU moulds nicely. If…
Capture the magic of the night sky with our SkyWatcher HEQ 5 Pro Polar Scope Cradle for GoPro Hero 3. Seamlessly attach your camera to your telescope, allowing for stunning astrophotography. Elevate your celestial imaging with precise…
Counterweight rod adapter for Skywatcher 18mm counterweight and Skywatcher counterweights with 26mm hole. Category: Hobby
A replacement secondary mirror spider for the SkyWatcher Starquest 130p. The original secondary mirror holder on the 130p comes with three vanes, which causes six diffraction spikes on bright stars. This one has four vanes to give the…
Enclosure for a WiFi-to-serial bridge for my Skywatcher EQM35 Pro mount. The electronics also implement SNAP-port behaviour for camera control. Description of the project, including link to software sources and electronics are on this…
The stock focuser for the SkyWatcher Starquest 130p Newtonian telescope is quite basic, and not great for astrophotography. It is quite tall so doesn't give much room when trying to get focus with a camera, and its also a little wobbly. I…
SkyWatcher Heritage 150 - astronomy scope modification: motorizing the ALT/AZ axis for automatic pointing and star tracking, using the 3d printed parts, bearings and 2GT belts used commonly in 3d printers, adding the electronic for full…
Nema 11 mount for focuser. BOM: Nema 11 motor. I have 28SHD4205-30Z. 4x M2.5 bolts GT2 16T wheel - motor GT2 32T wheel, bore 4mm - focuser closed loop belt 140mm
Cache arrière pour Newton Sky-Watcher 200PDS Ce cache permet de protéger le miroir primaire des lumières parasites pouvant pénétrer par l’arrière du télescope. Il préserve également l'accès aux vis de collimation , évitant tout contact…
The system is based on a double helical focuser like this: High Precision 1.25" Double Helical Focuser with Brass Compression Ring M42 T2 SCT Thread 2" Adapter for Astronomical Telescope…
2 part ASIAIR holder, one part can be fixed with ducktape and the other part can be screwed on
This eyepiece tray extender locks onto a 2" slot of the original tray and extends it with 6pcs. 1,25" slots. It locks into the original tray with a threaded nut. The uploaded model doesn't have text and it fits the Prusa Mini. Depending…
Print Settings: Quality: 0.2 Infill: 40-60% Walls/Perimeters: 4-6 Brim: Yes (Personal Preference) Supports: Yes Material: PLA
The 6" (150mm) SkyWatcher Heritage telescope and the 5" (130mm) SkyWatcher Heritage telescope does not have an eyepiece holder included. this design will solve that problem. Two holes need to be drilled in the mount to fix the holder.…
Tray designed to hold a 60mm high precision level on a tripod with a Skywatcher Star Adventurer wedge.
The case is really nice, so I recommend printing both this version and the normal one so you can swap between them (Astroberry and OctoPrint, etc.). I chose to add the clip to this side because when I was testing, it was easy to pull the…
A top mounting plate for the SkyWatcher EvoGuide 50ED, allowing for guide scope, mini pc and focuser. The rings holding the telescope were originally purchased from craftology3d on ebay. The Pegasus Power box advanced is connected to the…
Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton 150 mm (6"). In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18 mm wider than the…
Simple cover for skywatcher newtonian telescope 200 mm (8") for use after colimating. Printing About 152 grams, PETG recommended, Nozzle 0.6 mm (usually [much] faster than 0.4mm nozzle), Layer height 0.3 mm. No support needed, wall loops…
I did a quick edit to remove the phone holder. It was preventing a print without supports.
Thanks to the original author ( @Jannis483 ), it fits like a charm! I added the mount points for 2 small 30 mm fans. I used the 6 mm height version, but there's a 10 mm space if you want bigger coolers. Everything sits nicely and flush…
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
Ideally print in ASA. Always check your baader sheet before observation. Solar observing needs special care, act responsibly. The retaining rings are a bit too small and need to be heated and forced on the spider screws. This is intended…
It is quite difficult to get a primary mirror mask / aperture ring for a 12" Newtonian (300 mm). That's why I designed a multi-part mirror mask for my Skywatcher 300 PDS Newtonian. I cannot say whether it is also suitable for telescopes…
I noticed my Skywatcher EQM-35 Pro had quite a bit of play between the mount head and the tripod. When polar aligning the azimuth adjustment screws would often just shift the whole head to the side rather than rotating it, making fine…
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
Designed new grips/rings for my Sykwatcher focuser. Printed in TPU(shore 85A). They just stretch over and so far I haven't had any problems with them slipping on the wheels, so no need to glue them, which makes them easily removable if…
this is a fanholder for the 8" or 200mm skywatcher newtonian telescope. it works for fans with 92mm size you aditionally need: 3 x screw m3 x 12-16mm 4 x screw m3 x 30mm 1 x fan (12vdc) size 92mm the fanscrews are directly screwed in the…
A dew shield for the SkyWatcher Starquest 130p Newtonian telescope. Primarily designed to fit my custom secondary mirror spider for the 130p, but also works with the original. Printed with supports in between the two rings at the bottom.
If you find my designs useful, please consider sending a tip Replacement accessory tray bracket for square legged Equatorial mount tripods (Meade 4500, older Celestron and Skywatcher EQ Tripods etc) Our astronomical society received a 5"…
This lets you attach an Arrow Antenna satellite yagi (normally handheld) to the Sky-Watcher AZ-GTi tracking mount used normally with telescopes. There is a center hole that can accept a ¼-20 or M6 threaded rod to help with strength. I…
The stock focuser on the SkyWatcher Starquest 130p Newtonian telescope is quite basic and not ideal for astrophotography. It is relatively tall, leaving limited back focus when trying to achieve focus with a camera, and it can feel a…
My first attempt at a quick side handle (designed in Tinkercad) to fit an M10 bolt head. Then can screw into the side of the Skywatcher 200p dobsonian telescope. May need to size up/down by 1-2% scale depending on what printer you have.
Replaces the rear cover on the MN190 and holds an 80mm fan. I remixed this mainly because I wanted to soft-mount a Noctua fan with rubber bushings. Print Settings Rafts: No Supports: Yes, tree would probably work well. I used conical…
