Snowboard fidget "bubblehead" toy
Snowboard made as a desktop fidget toy on principles of bubble head figures. How to print: it is necessary to print spring with 100% infill tested on PLA
- Downloads
- 251
- Likes
- 57
- Rating
- 5
248 models
Snowboard made as a desktop fidget toy on principles of bubble head figures. How to print: it is necessary to print spring with 100% infill tested on PLA
This is a short snowboard strap key ring. In combination with my custom snowboard key holder, this is a neat way to store my keys. I have printed a few versions, some in PETG and also some in TPU. Both work very well with the Burton ankle…
This is a fun snowboard to keep the shred going wherever you are. This is a print in place model with rotating bindings. You might be able to scale it up and down, depending on finger size. The bindings become a little sticky after a…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D 3D Printable Snowboard Finger Toy Bring the slopes to your desk with this mini snowboard finger toy! Featuring a realistic design and curved…
A simple wall mount for snowboards. Should fit most boards up to around 12 mm in thickness. Make sure to use a strong material and adjust your print settings for maximum strength. Don't use in a place where someone could get hurt if the…
I desing several models: If you just make 1 board print the normal one for matching ankles with dummy 1.0 o dummy Beta, this need suports in the front and back. If you need to print several boards or want better finishing, print the…
The Finger Snowboard! Use a heat gun or hot water and bend the tips the way you like after printing! I couldn’t find one I liked anywhere so I cut the boots off of the finger skis I found on Cults3d. Prints without supports. Please post…
Instructions My son and a friend asked me to make some Finger-snowboards. Kids love them and it's my fav 3DP giveaway these days! I usually print them in PLA and then put the tip's in boiling water to bend them up a little. Stickers are…
This is a tuning and waxing stand for snowboards. It uses a M10 screw and nut to clamp to a table or workbench. This model is a remix of this model by 0161design to fit the MK3 print bed. Print instructions Printed with 4 perimeters in…
Lucky 13 Snowboard If you like it --> press like it :-) Snowboard as a remix for the funny lucky 13 figure. The original is from soozafone . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy to…
Intro Bring the slopes to your fingertips with this Mini Finger Snowboard – a fun 3D printable fidget toy that lets you perform tricks, slides, and spins right on your desk or anywhere you like. Inspired by winter snowboarding and…
These pegs are ment to be screwed in with a #6 wood screw. I screwed the top pegs into a piece of wood and attached that piece of wood to the wall. The base pegs are ment to be attached to the wall right above the tail of the board. The…
If you print a Rocker hook then the second hook must be mirrored. Resolution: 0.2 mm Wall loops: 5° hook 5-loops / 30° hook 10-loops Infill: 5° hook 20% / 30° hook ~40% but more is better Material: PLA , PETG Supports: No Brim No Screw…
Lets print a snowboarder on a rail! This is a fun challenge where your patience will be tested.. Can you balance the snowboarder on the rail? See https://youtu.be/JJjutUP91OE for building instructions and more...
One of the lace lockers for my Snowboarding boots broke so I designed a parametric replacement using OnShape . This is for the thin inner laces of Snowboard Boot Liners , not the thick outer laces of the boot itself ( see photo &…
Remix to adjust for an M8 bolt. I cut up an old inner tyre of a bicycle to make the rubber surfaces. No glue required, you can press fit the bolt and nuts in place and screw on the plate. Printed with PETG, 6 inner walls for added strength.
A polar bear is snowboarding!!
Remix of a remix. Following changes: Adds the missing knob, sized for 3/8" bolt Adds a retainer for the nut resizes the hole in the tuning stand to accommodate the height of a 3/8" nut Resizes the hole in the bolt cap to accommodate a…
The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…
Simple snowboard wall mount to be able to hang up to a 11.5mm thick snowboard to the wall for storage or decoration. Holds the board at a slight angle to prevent tipping and is low profile to optimize distance from the wall. Holes are…
The most up-to-date model is HERE (Makerworld) Based on the “ SnoStrip ” but for us DIY folk, and not $50 ;) As a passionate skier and tinkerer, I modeled the SkiDock to share with fellow enthusiasts. This project is born out of my desire…
Don't want to print? Buy from me directly! >>> Craftedcarving.com Tune your snowboard/skis at home with these clamps! 2" or 3" Clearance for all tables/workbenches Mostly 3D printed: PETG/ABS, TPU Non-Printed Items: ¼-20 Threaded Rod…
Put your pride on the wall, let everyone see that you are a snowboarder! :)
One Screw should be enough for each of the lower parts. The upper part needs to be screwed in and can be pushed down afterwards to hold the snowboard.
Tired of cluttered spaces and struggling to find a place for your snowboard when it's not in use? This printable rack is the perfect solution! Crafted with functionality and style in mind, this design offers a convenient and space-saving…
A snowboard with perfect grip for fingers, which you can also use to decorate your Christmas tree. A little support is needed on the overhanging parts of the board. Infill : 10%
Print solid or with a lot of infill/perimeters. I printed in PLA, works really well. Attach with 3M VHB tape
this is a lego based snowboard that fits in real lego i hope you like it and print it made by fabian boshoven in fusion 360 with a prusa mini +
For each board, 8 magnets are needed, so 16 magnets are required in total. I designed the model so that it uses magnets with dimensions of 6 mm × 3 mm. In the slicer, a pause needs to be programmed before the cavity for the magnets gets…
Enhance your daydreams of carving epic lines on a mountain peak with this finger snowboard! Ready to hit the slopes? Download the files today! Design Notes: As uploaded, these are designed to fit most adult fingers, scale up or down as…
Für jeden Snowboardfan ein muss. leicht zu drucken trotz Stützstrukturen
Highly functional 3D model of a ski/snowboard service vise, perfect for quick and easy servicing of your board. Key Features: Easy to print with no support needed The glide circle moves freely after installing the screw Versatile design…
With this tool you can sharpen edges of Ski and Snowboard in 4 different angels. You additionally nee a file (any standard or diamond file 70x25x5 mm) and a Hex Head Cap Screw M6 x 40. Two clamps with 4 and 5 mm grab the file, screw in…
Its almost Christmas & I would love to be boarding, but i cant this year :( so a finger toy was a good excuse to start the conversation for next year with the wife :) The kids love it & have been grinding edges all afternoon. Merry…
Printed it with PLA and it turned out quite good. Fusion 360 file is included so that one can put a custom inscription on it.
Einfach in dem passenden Abstand mit Senkkopfschrauben horizontal auf einer Linie in der Wand verschrauben und das Snowboard einhängen. Die Teile richten sich automatisch am Board aus.
Remix of the Canondale helmet holder for larger and heavier helmets. I guess I have a large head. My partner's helmet hung just fine on the original model. Mine, not so much. The first remix is to accommodate big head helmets. The rest of…
We have two Anon helmets, they are pretty good, but the goggles clips from this model don't come with the screw or anything else that keeps them in place. So after a couple of seasons, we ended up losing both. Since Anon was purchased by…
Small Snowboard. I made this for a craft project my wife made. She crafted some wool figurines and I made some chairlift chairs and this snowboard for her. This can also be used as a finger snowboard I made this with PLA. Dip the ends in…
tired of sitting at school or work while dreaming about being on the slopes? with this unique finger snowboard, you can BRING THE SLOPES TO YOU! the holes are easily adjustable and you can heat up the tip and tail of the board to bend it…
Snowbordeur frame Discover our hexagonal frame, ideal for hanging on a wall or standing on a piece of furniture thanks to its base. This decoration features a snowboarder. The frame is printed with the wall hanging on the plate. It…
pad qui permet de ne pas glissé sur la planche quand on decroche son pied. Un morceau de double face permet une tres bonne fixation sur la planche. 2 version : 1er avec la forme du logo Volcom - 2eme rectangle
A long walk carrying a snowboard can easily mess up your hands or gloves with properly sharpened edges. This simple grabber solves this issue and protects both your hands and your edge. The thicker and smoother shape is also easier and…
For this remix, I elected to move the bottom screw hole to the center of the "ball." This allows most of the stress of the snowboard weight to be on the screw, rather than relying on the 3d printed layers to hold together. Just gives me…
Snowboard Garden Gnome – Shred the Gnar, Gnome Style! 🏂❄ Meet the chillest little ripper on the slopes – the Snowboard Garden Gnome ! Whether he's catching fresh powder or just chilling in your garden, this frosty-bearded legend brings…
Printed with 80% cubic Infill for strength.
Hi, I'm from Brazil and want to share my design. It's a universal Board Wall Mount with easy installation. Use two units with four screws. Wall mount to Snowboard, Wakeboard, Kiteboard, Skate, Wakesurf, Wakeskate. Easy wall installation.…
To give shape (rocker/kember), warm up the printer bed to the plastic softening temperature (65 C for PLA), put the snowboard on the printer bed, remove the snowboard after a minute and shape it with your hands while it is soft.
The Snowboard addiction binding only comes with 4x4 mounting disc. I want to mount on my old Burton snowboard which is 3D pattern Hole. So I create the disc for it. I also create all the different mounting disc in case someone wants to…
The model fits small to medium fingers but it is easy to change the size. you can leave the board flat or use a heat gun to bend up the nose and tail.
Again, DO NOT STEAL! This has not happened yet, but I put effort into these models, and I don't want other people taking all of the credit. (obviously) There are two models, DON'T PICK THE WRONG ONE!!! One is made to put a washer/magnet…
Fully unexpected, my 20 year old binding broke (luckily on a blue piste). The model of Jonathan has the matching ratchet dimensions but did not match my binding for the hole. Printed with FlexiFill TPU 98A and I am about to do one more…
A pair of vices for tuning and waxing. Works great for both snowboards and skis. 3 positions for board placement: horizontal, vertical and 30 degree; Elastic pads for board protection and added grip; Utility surfaces for clamping if…
v2 of snowboard wax scraper I thought the first version was to small, wich made i hard to properly level the wax this one is 30 cm wide, wich is a fairly reular width of a snowboard
A printable protector for your vehicle, so you can safely lean skis and snowboards against it. Requires 10x4x2 rectangular neodymium magnets (6 per print, and the prints lock together as a pair, so 12 magnets per completed unit). Note:…
Printed with PLA and a 0.16mm Layer Height. Infill of 50%, less would probably work too. No supports needed.
Simple adjustable brackets to fit many sized snowboards to turn your old board into a shelf!
printing instruction make sure to flip the helmet upside down. I checked the “support” checkbox in cura and kept everything else default. but you can try printing it without support
A small tool to help setup you boot centered over the board, simply mount your bindings as normal and check toes and heel sides are even, the lines on the base are in 2mm increments. Comes apart so and fits in your pocket or tool kit. The…
This project is fully customizable! You can make it fit perfectly to your fingers or make it smaller to play with your kids :) Here's quick tutorial on changing parameters. First, take a “comfortable riding position” with your fingers,…
Similar to our all of our stomp pads! This was part of a custom order from Manuela from Etsy, thanks for the great idea! This model uses the same tried and tested (and very sharp!) pyramids to bite into your boots and provide unparalleled…
Update V2! V1 seemed too generic, so a more interesting V2 of Airtag Holder in a shape of Oreo cookie, and now it is available at https://cults3d.com/en/3d-model/various/hidden-cookie-airtag-holder-for-burton-channel-snowboard Description…
Print Specifications from the photos Specification Value Estimated Print Time 48 Minutes Filament Used 5.6 g Layer Height 0.20 mm Wall Thickness 3 perimeters Top Fill Pattern Hilbert Curve Bottom Fill Pattern Hilbert Curve Supports…
after printing, you can dip the ends in boiling water, then while the plastic is soft, mold the ends up to give it a little curve
fix your snowboard vertically to the wall with an anchor + a m3 flat head screw and close the screw-hole with the cover for the head of the “Bibbus”
Something to carry all my snowboarding equipment in one hand.
Do you struggle scraping wax off your Skis/Snowboard? Well look no further, I introduce you to the WaxAway, the 3D printed wax scraper. It takes ~1 hour to print and fits on all 3D printers. Each side is flat, allowing you to add your own…
This is my Swallowtail finger snowboard!
Discreet low-profile snowboard wall mount with pivoting latch
I printed in TPU, no supports required. PLA or PETG would work fine also but my be brittle.
This is a basic wall mount to store ski's and snowboards vertically. Designed to be simple to print, use minimal filament with no supports, and work with any board or skis. All of the existing mounts I could find are only rigid plastic,…
Stargate themed stomp pad for snowboard. Used for boot out of strap so it dows not slip from snowboard. Print with at least 5 perimeters. Material PLA should be just fine but suggest you to use more durable materials as ABS, ASA. Use…
Elevate your ride with our herb-inspired snowboard stomp pad! Designed for riders who appreciate both style and substance on the slopes. 🏂 Key Features: • Eye-catching cannabis leaf design • Ultra-sharp 3D printed texture for superior…
The two Holders make it minimal and quick to take the snowboard and put it to rest to furnish your home with style. Printed using Prusament Petg Black and Orange Petg Layer Height: 0.15 Quality No Supports! 100% Infill to be strong!…
This design is a remix/remake of the original model by 0161design , which I really liked but couldn’t fit into the build area of my printer. To solve this, I split the model into three parts and added tongue‑and‑groove joints for quick…
Chair Lifts aren't scary (anymore)! Represent your cat! This is a LARGE (around 6") stomp pad with very sharp peaks that'll you skate like nothing else. Don‘t have a printer? Check out my Etsy Shop or buy it from me directly ! Tips: Print…
Skull and bones stomp pad. 183x150x10mm dimensions. Main body is 5mm high, nubs are an additional 5mm high off the base. Print out of PETG with 100% infill for best results.
I can't believe the years I've snowboarded without taking better care of my knees when riding the gondola! I ski in Eldora, Colorado and there, the lifts take a long time to get to the top of the slopes - so, my right knee (cuz I'm…
A Snowboard Binding that i make, this is only the version 1.0, will be improved.
See my updated compact version , best for 1 pair of skis. I kept getting ads for “SnoStrips” , a kind of unecessary way to keep your skis upright when getting dressed before hitting the slopes. “$50?!” I thought - “I could make that.” And…
Simple parts to mount a Snowboard to a wall. Use two Nubs and one Hook to mount it horizontal oder just two Nubs to mount it vertical
Snowboard/Ski/Skateboard hook
I designed this model for reusing my first snowboard as vertical wall hanger for clothes or jacket. Bill of material : Wall part : 2 Snowboard part : 2 Snowboard screws (M6) : 8 M3 nuts : 4 M3x20 countersunk screws : 4 4 M3 Molly ankle…
small clip for your ski/snowboard helm for masks brim my nesscery
Winter has just started, and you're dreaming of first chair and itching to scan your Ikon or Epic pass. But wait, you dismounted your bindings, your edges are dull, and you need a fresh wax! You don't want to shell out $300 to get them…
You will also need: 4 M10x40 bolts 2 M10x60-100 bolts (length depending on countertop thickness) 6 M10 standard nuts 4 M10 standard washers (optionally) Glue gun (to glue Knobs and Foots to bolt heads) Base part and Slider parts need to…
It needs to be bended with heat … easy flat printed
I wanted to hang up my board horizontal so I designed some mounts. The only thing else you need is a drill and some screws. Should fit every twin shape board with camber. Enjoy it! -printed with PLA -0.2 layer height -30% Infill for…
Snowboard Halter zur Befestigung an der Wand, Horizontal Vertikal oder Diagonal, mit Austauschbaren und drehbaren Kappen (Snap in), die Schraube im Inneren geht über die Mitte hinaus, sodass die ganze kraft auf der Schraube aufliegt und…
You can change the size in the slicer if you need to. The grip holds very well. After a year of use, nothing has broken off. Printed from PETG on the basic settings. I did not add any perimeters. Glued using universal strong glue.
these are 2 versions of ankle strap (both tested, works a charm) for a s/m binding. plus, to complete the set a toe strap (not tested yet, due to climbing injury) ankle straps turns out surprisingly good, i find slightly comfier the first…
needed brackets to store my kid's next snowboard out of the way. Made those “L” brackets to store on the basement ceiling (or unfinished ceiling) also needed a hook to hang our 4 snowboard bags from the ceiling by the handle and out of…