725 models
What is this [ Update 3: Added variants without interlocks after a specific user request.] [ Update 2: Added a larger triple hex cup after a user suggested it. Check the file section.] [ Update 1: Added two variants with greater wall…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
What is this [ Update3: A couple of more variants were added after recent user requests. 1) Now there are models with a 1x3 and a 2x3 footprint including larger lids. They should work the same way as the other variants and should be fully…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Check the new version: https://www.prusaprinters.org/prints/82892-prusament-sorting-tower-mk3 The sorting tower is made for filament PM spools and Prusament Spools. The draws are made for spiral vase mode, in order to reduce used…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
A useful and stackable tray used for sorting, organizing, or many other uses. Dimensions of standard size are 125mm x 125mm x 15mm (lip not included)
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features! Printing If you just wan to get started printing, just take the G-Codes or the .3mf slicer files…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
This is a sorting tray i designed to organize some lego parts while building. But obviously you can use it to sort or store what ever you want ;) You need to orientate it before printing! Just bottom to bottom! In the pictures you see the…
Print approx. €4.88–€5.96 excl. taxPreliminary estimate for one variant
Check out the new version: https://www.prusaprinters.org/prints/55640-prusa-sorting-tower-mk2 don't know what to do with your old prusa spools? make a sorting tower so you can organize all your small parts. works for all prusa spools!!…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
I made a tray that will hold 12 different sets of dots for easy retrieval and a lid to keep them safe. The lid is tight fitting to prevent accidents. Also created a lid that can be used to pour out a single slot to prevent dots from…
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
This is an upgraded version of my previous design, which now includes a more steady base, an "open layer" addition and a print-in-place top with handle. The tower is meant as a method of recycling Prusament spools, but can also be made by…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
once you are done with your prusament you might as well use the nice box for sorting you spare parts or others. with these modules you can make your own sorting box out of a prusament box, with whatever module sizes you want. they fit in…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
A very useful lego sorting tray that I simple love!
Print approx. €7.42–€9.06 excl. taxPreliminary estimate for PETGSource material: PET
Sorting tray Introducing our innovative Sorting Tray, the ultimate solution for 3D printer maintenance and organization. Designed for Prusa printers, this tray features numbered slots to ensure you never misplace a screw or bolt, ensuring…
Print approx. €6.05–€7.40 excl. taxPreliminary estimate for one variant
This are stackables Insert Boxes for the Eurobehälter /Eurobox TK400 and TK600 /75 /145 etc. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none Comments printed…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
🔧 Sorting Tray – A compact and practical helper for sorting screws, nuts, bolts and other small parts. ✅ Fits on PRUSA mini bed – prints fast ✅ Bag spout for direct packing – no funnel needed ✅ Great for hardware, electronics, craft items…
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for one variant
Octagon Sorting Tray (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ” where I tried to make a container…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Complete Modular Sorting System with Stackable Twist-Lock Storage Box This Model is Prusa MINI Friendly Download the Compatible Twist-Lock Stackable Containers - HERE - Product Description: Introducing the Complete Modular Sorting System,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The SmartSort Tray is a 3D-printable tray designed for sorting and organizing small parts like screws, nuts, bolts, beads, little toy pieces, or electronic components. It’s perfect for makers, hobbyists, and anyone working with tiny…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Používám na hledání malých dílků v pořadačích. Užitečné s mými dalšímí výtisky. Větší pro Parkside pořadač:…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Use this to sort coins of any currency (Euro € model included) by customizing the hole diameters in OpenSCAD. 🎥 Video https://odysee.com/@nobodyinperson:6/euro-coin-sorter-openscad-design-usage:2?r=GXVknJ4DWx4cnQVgFgfF4CoDfZ9puyUR (can't…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
4mm bead sorting sieve I will make other sizes later
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Grundsätzlich verwende ich für viele Dinge Sortierkisten, aber es gibt auch Tüten, die mit verschiedenen Kleinteilen gefüllt sind. Es ist schwierig, das gesuchte Teil zu finden, wenn man die Tüte nicht ausschüttet. Das anschließende…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
https://geizhals.de/prosperplast-nor12-sortimentkasten-a2228027.html PETG 20% Infill 0.25 Layerhight 4 Top 4 Bottom 2 Walls Depending on how full the boxes are or how heavy please increase the parameters
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for PETGSource material: PET
Small box in vase mode to sort out pearls and jewelry items.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
🚗 Montessori Sorting Toy – Car & Shapes A fun and educational 3D-printed Montessori-inspired toy , perfect for developing fine motor skills, shape and color recognition, and logical thinking in young children. 🧠 What It Teaches: Sorting…
Print approx. €4.24–€5.18 excl. taxPreliminary estimate for one variant
Because I couldn't get the necessary dividers for the sorting cabinet I bought at a local Hornbach store quickly enough, I've printed my own! If you have a different sorter you can download the STEP file to edit it to your requirements!…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
OLIGHT Skadis A holder for the oligh flashlights which are magnetic. The lamps can be stored standing or hanging. The washer 23.6 x 2.2 is simply inserted into the hole provided during the printing break. Description of how it is printed…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
small sorting Tray for odds and ends in a leaf design. printed with Prusa MK04 PLA supports: Lid yes / only on plate Middle part no PiP Floor yes / only on plate The lid is sliced in two colors, you don't need an MKS for this. Simply wait…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
✈ Montessori Sorting Toy – Airplane & Shapes A Montessori-inspired 3D-printed educational toy shaped like a friendly airplane – perfect for toddlers and preschoolers learning shape recognition, colors, and coordination through play. 🧠…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
This is a redesign of the open layer so it can be used as a pen/toolholder. For the standoffs you need to set the support to “Support on build plate only”. Assembly is straightforward and should be a press fit, but if it is too loose you…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Stackable Sorting Box - 4 places Simple stackable box with four places for example screws. about the size 150 x 100 x 36mm
Print approx. €7.36–€8.99 excl. taxPreliminary estimate for one variant
These are some storage racks to help organize DrFeelgood's Interlockable Sorting Cups. https://www.prusaprinters.org/prints/57542-interlockable-sorting-cups-now-with-lids/comments I drew up & posting both a rack for the short cups, & for…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
This is a name tag bracket to help organize DrFeelgood's Interlockable Sorting Cups. https://www.prusaprinters.org/prints/57542-interlockable-sorting-cups-now-with-lids/comments
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A simple box to house LED's, knobs, jumper cables and more. Simple model (modeled in Fusion 360) and simple printing.
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
Just another set of tray to organize my stuff. I use it to store center drills and small end mills. One has reliefs to pick out tooling one does not.
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Es handelt sich um eine einfache Sortierbox mit variablen Einsätzen und einem einfachen Verschluss. Die Bolzen der Scharniere habe ich mit einem Tropfen Sekundenkleber fixiert. Die Innenmaße des Einsatzes 1x1 betragen etwa 20 x 37,5 mm.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
I needed a quick tray for sorting small screws that spilled. It's not fancy like many others on here, but it serves its purpose. Use 0.3 layer height, 3 walls with a 0.4 nozzle. Prints in 1:20. Added a 200mm version just because, but it…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Required Material you need 6pcs of 6mm × 2mm magnets Assembly print press the magnets into their slots done Variations: you can adjust the magnet size in the FreeCAD spreadsheet
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
Check out my Youtube video for detailed assembly instructions: This coin-sorter is connected to a storage box with individual trays for each type of coin, all secured behind a vault door. Aside from 3d printed parts, you will need: 5…
I saw a few of these around, was bored one day and decided to mess around with designing one. I printed it in Turkey Egg from Filamentium….fun filament! Enjoy Designed with those who don't have the most elaborate printer in mind. **…
Update 19/11/23 - Added an extra large version. :D Multi-sort. A sorting tray I designed to quickly sort small parts - nuts, screws, bolts, electronic parts, lego, etc. Most sorting trays are designed to let you pick out a handful of…
Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…
Trays for sorting small parts is all over the web and not a new invention, but I needed a set with different sizes for different tasks - This is what I ended up with: Different tray sizes for different needs: 50x50mm, 75x75mm, 100x100mm,…
This is the larger version. If you want to print the EURO Coin Sorting Vault on the Prusa Mini (18x18x18), you can find it here . Rocco's Coin Sorting Vault is an absolute eye-catcher! Great design and perfect execution. Since I - and…
Sorting Hat from the Harry Potter movies to use as a finger toy
This is Easy Sorting Tray designed for "Prusa Flash Contest". Main Features: 8 detachable containers. Easy sorting slope. Compatible with small printers. No supports. Fully scalable. Commercial use: To sell prints of this and my other…
The 'Elster' Pipette Tip Sorting Device is a clever 3d printed tool designed to quickly sort and transfer 200 µL pipette tips into a storage box, eliminating the laborious task of manually sorting pipette tips. We re-share this device…
My whole family loves Lego and we often create custom sets from specifically purchased bricks. Biggest issue was to keep all the small bits organised so they dont get lost and it's easy enough to find them when they are needed. That's…
This is a set of stack able sorting boxes. It fits in 3 by 3 into the Ikea Alex draws. But it can be used stand alone too. There are many different types and heights from 30mm to 70mm. Also a dual compartment for a calculator or…
Simple trading card sorting tray. Each of the 12 slots is at least 6.5cm wide which should fit most trading cards. Print in place, no supports needed.
Video about the Designing process, The functionality and the Assembly Mechanical Bolt Sorting Device for M3 bolts/Screws 6-40mm End the struggle of manually sorting your cylinder head bolts Fully 3D Printed Operated by hand. No need for…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Hi everyone! Here is my version of a 3D printed Color Sorting Machine. I took some inspiration from other projects on internet. Special thanks to Michael Cheich for his Arduino course ! Check the machine video here: Check the original…
The Sorting Hat at Hogwarts tells you your house! 🎩🏰 Available in large and small versions, each set includes a special die. 🎲 The die features the four house symbols plus Muggles and House Elves, making your sorting experience even more…
I tried a few bowls, and decided to design my own. This one needs no supports. I printed this model in the pictures with PLA Linden (Prusament wood PLA) and the "fuzzy-skin" effect My print settings (bowl from image): Layer height: 0.20…
Edit: We've update the original to now include a revised mini version including: * Better stacking so the lid fits when both stacked and collapsed * Less printing time * Rounded Edges Get the new version here >>…
[ Update 2: I redesigned the cups to make them stackable. You can find version 2 here . Version 1 will stay online in case anybody wants to keep using them.] [ Update 1: Added a snap lid and cups in two more sizes. See below for details.]…
Two dowels are required for the vault door. Instead of buying the metal variant, I simply and quickly 3D printed them. Perhaps a sensible option for you as well. They fit perfectly for both Rocco's Original and my EURO version of the…
STOP - BEFORE YOU PRINT THIS MODEL - CHECK OUT OUR NEW AND IMPROVED DESIGN HERE: https://www.printables.com/model/327900-stackable-lego-brick-sorter-sorting-box We store a lot of our LEGO bricks in two types of Ikea Containers, the Sanla…
Images tell the story. Sort items quickly, then dump! Print in whatever you'd like.
Updated 25.08.2025 Added new STLs for trays with double heights. with more room for bricks! Added 8-split 12-split and 16-split for smaller bricks. Remixed the original tray for smaller amounts of parts. 2-split, 3-split, 4-split, 6-split…
The walls are 0.8mm thickness, I printed with a .6mm nozzle and Cura print a only one 0.8mm wall Top/bottom line direcctions: [0,90] (Cura)
Sorting Hat from Harry Potter screwable on my cute mini octopus remix ! Here is the link to the octopus remix : https://www.printables.com/fr/model/334508-modular-cute-mini-octopus-to-ad-differents-types-o Add supports for print but check…
Just a simple cookie cutter in shape of the sorting hat from Harry Potter. Also added a stamp to add some imprints on the cookie. Haven't tried it myself though. If you want to support me creating new models, please consider buying me a…
The original Multi-sort sorting tray was designed for common 3D printer parts - M3 and M4 nuts and bolts and other small items. The Multi-sort V2 is designed for more variable sized objects like Lego. It has larger side chutes and…
My wife and I enjoy building puzzles and our first step is always sorting the pieces. These trays print quickly at .3mm layer height with a .4mm nozzle. They puzzle fit together and stack for easy storage and transport of pieces. If you…
Plastic bead sorting trays make it easy to sort and organize your diamond rhinestones for your DIY art and craft projects. The diamond rhinestone plate tray can also be used for diamond painting and nail art dotting, making it a versatile…
Don't forget to activate the supports before printing the model.
Take your puzzling to the next level with these stackable, nesting, lightweight sorting trays. Separate pieces by shape, color, or any other method; the trays are easy to pick up and move around the puzzle as needed. The trays stack…
Easily sort your small parts into your Gridfinity bins. With this model you can place the sorting tray directly on top of your Gridfinity bins in your drawer or wherever you have them. Or you can also have the tray as a freestanding unit…
Vase mode card sorting tray for standard sized CCG cards. Designed to fit cards Sleeved with Dragon Shield sleeves. Stackable. Printing Instructions Must be printed with 0.6mm extrusion width for the angled parts to print well.
Sorting hat harry potter keychain I film what 3D printing actually earns me, including what uploading models like this one pays: watch the video . More of my projects: kirimas.com
English description below Deutsch Infos zum Druck: 0.4 Nozzle, 0.2 Layerhöhe, 2 Perimeter, 10% Infill (Gyroid), Stützen nur auf dem Druckbett! Praktische Aufbewahrung von Batterien und anderen Kleinkram. Ideal für die Schublade oder auf…
Space-optimized the original thing ( Carcassonne Boxes by conlan89 - Thingiverse ) to fit more of these boxes in the box of the base game. Every box is designed to have the space needed by the parts + 3mm clearance. Also added some more…
The 3D printed Harry Potter Sorting Hat bookmark is a unique and intricately designed accessory for any Harry Potter fan. This bookmark features the iconic Sorting Hat from the beloved wizarding world. This bookmark is not only a…
Infinity Bins is a modular sorting and picking storage system that can stack infinitely tall and expand infinitely wide! Features: Infinite expansion vertically and horizontally Label insert to easily identify the contents of each bin…
This is a lego sorting tray I designed after not being able to find one that would fit and fill the print bed on my Ender 3 Pro. The largest box is nearly the complete XY build area for this model. The trays all fit inside each other in a…
Many of you love Rocco's Coin Sorting Vault . My EURO version also finds a lot of friends every day. And since I've become quite enamored with this thing myself, it's a lot of fun expanding the vault. My new expansion not only adds more…
This tabletop funnel lets you bag or sort small items. Slide it onto your table edge, make small piles of items (or maybe create a sorting tray with one open side), and then slide a desired number of items along the tabletop onto the…
Are you a Potterhead? Check my HP Collection on Printables ! 🧙 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my Patreon
Modular Hex-Grid Desktop Organizers & Sorting Bins Tired of a cluttered workspace, messy drawers, or loose screws rolling around your workbench? This premium set of five modular sorting bins is designed to bring order to your chaos.…
This is the smaller version. If you want to print the EURO Coin Sorting Vault on the Prusa MK4 , you can find it here . Rocco's Coin Sorting Vault is an absolute eye-catcher! Great design and perfect execution. Since I - and maybe you too…
T-BOXX compatible inserts, that are optimised for 3D printing (consistent wall thickness). The pegs should be printed extra and glued in with some superglue. The grid spacing is 52.3mm.
Assembly Check assembly instruction pdf for illustrations. Materials Wood pieces 12mm thick (mm) Top (418x338) Bottom (443x338) 2x Sides (338x75) 2x Front/Back (419x63) Insert (for insert box alignment) can be laser cut from 2mm stock or…
These containers are designed to be compatible with the grid in the Raaco 55 and Raaco 80 system. So they can be used in your existing Raaco handyman or Raaco Carrylite / Assorter boxes. The grid is also included with the pack so that you…
This sorting box is designed for minimal filament usage, minimum printing time and maximum sorting space. It is not the most stable or most robust design, but if you have some leftover material, it sure is worth a consideration to print…
Print tips, I used a brim inside and outside as the original file looked like it was warping on my printer. I printed gyroid at 10% infill and first layer about half the speed of the default speed of my printer.
For use in bead crafting. A sorting board for stringing jewelry. You may want to add a center line in marker and divisions for alignment of beads.
My brother wanted a way to MASS open Pokemon cards and organize them by number, type, or any other number of ways. I made this design to accomidate the enthusiast collectors out there who need SEVERAL spaces to organize their cards as…
I was very inspired by the model from Martin_au . However, I needed to sort several screws at once, and most of all, I missed the possibility of finding out which screw or nut it actually is, so that I don't have to keep reaching for the…
Are you a Potterhead? Check my HP Collection on Printables ! 🧙 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my Patreon
To build it you need four M3 x 16mm (longer ones also work) screws. The hinges and the box lid and bottom are 3D printed. It clicks in really well with a perfect hold. You can use it for example for screws or ball bearings and so on. The…
These files are for the Canadian currency. The remaining files can be found at Rocco's original design. https://www.printables.com/model/655452-coin-sorting-vault
Sorting boxes in different sizes for the IKEA Helmer Cabinet. I put some 10mm Plywood underneath the locking grid to stiffen up the drawers. You can fit 48 1x1 Small boxes in one drawer. They Stack an lock into each other so they doesn't…
The dividers are designed to be used together with the Sorting Tray with Funnel . When the sorting trays are used, the dividers make it significantly easier to keep sorted parts separated and return them with the funnel. See Sorting Tray…
A set of stackable brass sorting trays to separate your range pickup by caliber. Choose the size that best fits your needs. Small is 150mm, Medium is 175mm, Large is 200mm, so any size should fit on a 220x220 build plate. Pictures are…
I liked the sorting trays by @art_fpv but I wanted to have smaller ones which are also stack able. I redesigned the original one to have half trays , of which two can fit on a original large one. There are also quarter sized trays , of…
My kids have accumulated a lot of Lego sets over the years and it has become really hard to find a piece that you're looking for. I needed something that could be quickly used when the kids are in the mood to build. I think of this like…
Einfache Sortierboxen für die Werkstatt oder das Büro. Die Sortiment Boxen passen perfekt in das Ikea (Alex) Schubalden Element, hier für müsst ihr nur für eine Reihe 2x Box_10x10 und 1x Box_9,5x10 drucken. Die seitliche stärke der Boxen…
Hello! This is a modular box design I made as a second iteration to my previous storage box(linked further down). This one is 100% 3d printed. No hardware required. <60 sek preview video: The diffrent boxes and inserts can be configured…
