Olight Skadis sorting lineup
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.30 net (excluding VAT)
For file: Olight Skadis _0.4n_0.2mm_PLA_MK4IS_15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 14.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A nice way to keep an overview of your lamps or other magnetic things.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 42
- Makes
- 0
- Views
- 391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
OLIGHT Skadis
A holder for the oligh flashlights which are magnetic.
The lamps can be stored standing or hanging.
The washer 23.6 x 2.2 is simply inserted into the hole provided during the printing break.
- Description of how it is printed
Requires a washer measuring 23.6 x 2.2 mm. Pause the printer at 3mm height to insert the washer.
No Supports
I roughened the washers in advance with fine sandpaper and cleaned them with alcohol, than place them on the print bed to bring them up to temperature while printing.
Then wait for the printing pause and press the disks in with a little force. Check in advance how accurate your printer is.
Do not use stainless steel ;)
Have fun printing :)