1,192 models
My friend's daughter likes cocker spaniels and he asked me to print one for her. I found one on thingiverse (https://www.thingiverse.com/thing:2859943), but it had some block between the legs so I decided to remove it in meshmixer. My…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
No pleasure for unrolled tension belt straps? With this simple but equally effective clip, this is a thing of the past! Simply attach to the rolled webbing and the clip holds the roll securely and reliably together. Suitable for all…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
No pleasure for unrolled tension belt straps? With this simple but equally effective clip, this is a thing of the past! Simply attach to the rolled webbing and the clip holds the roll securely and reliably together. Suitable for all…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
Set of wrenches/spanners with the sizes: 6 - 7 8 - 9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 Print settings: Layer: 0.25mm Draft or 0.28mm Superdraft Infill: 25% Nozzle: 0.4mm Filament: Esun PLA+ (PETG should work as well)…
Print approx. €3.84–€4.70 excl. taxPreliminary estimate for one variant
Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Swappable thermal wing for the Lukisegler rc-glider This wing is designed for the Lukisegler rc-glider ( https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider ) to give it better thermal gliding properties. You can…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Zlin Agroturbo 1100 Version 1.0 (12.11.2023) Wingspan: ca. 1100 mm Body length: ca. 750 mm Take-off weight: ca. 550 - 650 g Motor: Brushless Motor 28mm Durchmesser (2200kV) ESC: 30A brushless-ESC Propeller: 7*5 ‘’ Battery: 3s Lipo 800 -…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
A cute English cocker spaniel puppy available as a multicolor print! Use supports when printing. Have fun printing and remember to post your makes!
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
ENGLISH: These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does not go…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Print approx. €9.17–€11.21 excl. taxPreliminary estimate for PETGSource material: PET
Key chain with cool Cocker Spaniel face. Printed on MK4s with MMU3: PETG, Standard nozzle 0.4mm, layer 0.15, infill 100%, Filament ports 1 + 2,
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Zum Schutz von Hartschaumboxen oder Spanngurten 25mm an den Ecken To protect hard foam boxes or tension straps 25mm at the Corners
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Einleitung! Ihre Z-Achse langweilt sich? Entdecken Sie die Genauigkeit selbst in schwindelnder Höhe! Sind Sie als Maschinenbauer-Bastler, wie ich, bestimmt auch noch nicht auf die Idee gekommen, Bolzen, Spannhülsen mit Wellenquallität,…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Mit diesem Adapter kann man einen dauerhaften Absaugschlauch an die Spanhaube anschließen. Mittels Abzweigstück kann man den Schlauch an die Hauptabsaugung der Säge anschließen. Ich habe den Adapter in PETG gedruckt, mit 0,6 mm Düse und…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
Immer mehrere Werkstücke gleichzeitig drucken sonst Verzug-Genauigkeits-Spannkrafteinbußen! Stirnseite oben ist “gebügelt”, geeignet als Axialgleitlager, gute =geringe Reibwerte bei verwendung High Glossity Polymoph Filament und…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
A modern 3D printed piggy bank inspired by the traditional Spanish botijo, redesigned with clean lines and a minimalist aesthetic for adults. This decorative yet functional piece blends Mediterranean heritage with contemporary design,…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant
100x160mm sign, reading “Spank Bank” Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
100x160mm sign, celebrating the Monty Python “ Spanish Inquisition ” sketch. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
DE: Hatte mit den Schuhspannern eine Klammer bekommen, die aber auf Reisen immer wieder verloren gagangen ist. Daher habe ich einen Ersatz konstruiert. Material: PLA / PETG Schichten: 0.2mm Stützen: nein EN: I had bought a clip together…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Black & Decker Workmate WM550 Type 9 1 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for PETGSource material: PET
Beim Drucken von PETG mit Raft unbedingt mit dem Prittstifft auf Texturblech einen Klebe-Trennfilm auftragen. Ansonsten gibt es Probleme beim Lösen! Durch den Schlitz können Sie gut 10 mmbreites RGB-LED Leuchtband von der Stirnseite…
Print approx. €2.25–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
I have a eurobox that I used for travel, bin which are 9u height fit perfectly inside. This is my solution to store my set of “small” spanners (6-7, 8-9, 10-11, and 12-13mm) Nothing special to print, mine is using standard quality (0.2mm)…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for PETGSource material: PET
Spanish Incensario : Barcelona
Print approx. €10.97–€13.41 excl. taxPreliminary estimate for one variant
A realistic model with magnificent details. Fill density 15% Support tree with 35 clamp angles
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
Update 1-6-26 With the combinations of mats and sleeves and expansion, what to print is confusing. Here's a chart to help: Update 10-22-25 I have made new files that allow for storage of the Dragon academy cards, tokens and other…
Wyrmspan, a Wingspan game, takes the core elements of Wingspan and adapts them to a new theme for a familiar but fresh experience. This insert is primarily to assist with setup and teardown and includes a card market tray that can be…
This is my updated version of the Egg Carton for the boardgame Wingspan. It is now a more reliable print that does not require any supports when printing and there is no assembly required. Edit: An updated version 2.1 now includes lesser…
A set of wingspan organizers, which magnetically snap together. Both STEP and STL files available. If you're looking for something that will fit the Americas expansion Take a look at my updated V2 organizer here Basic Info Can fit…
Update: grabbed all files and included them, some of the original still have mesh issues, but print fine. Fixed parts don't have mesh issues. For Unserfamily's and bennydesign 's remixed versions: (Unserfamily:…
Updated version can be found at https://www.printables.com/model/362120-wingspan-egg-carton-v20 If you like my work, and have the money to spare, feel free to buy me a coffee (or rather tea): https://www.buymeacoffee.com/Pellebeck
Diese Spannmutter gibt es von Gardena nicht als Ersatzteil. Also habe ich mir selbst eine gemacht. Falls sich die Mutter nur schwer aufschrauben lässt, kann etwas Silikonspray auf das Gewinde gesprüht werden, damit geht es dann leichter…
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…
I've created a modular tool holder inspired by the toolbox widgets but with my own improvements. Theres a dovetail that allows to add or remove a holder to meet your needs. Can be used for spanners and screw drivers, perhaps even chisels.…
Magnetic Stacking Boxes to organize food, nectar and egg resource tokens. The boxes use 6x3mm round magnets. They have an actual size of about 2.7mm but have some variance both in diameter and height so while I've tried to make them press…
UPDATES August 22, 2024 - NEW 2 Cent Euro I've had a couple of folks show some makes using the 2 cent euro where they had to scale the model a bit to get it working. I've updated my model to allow me to more easily add different coin…
This is my take on Wyrmspan resources. I wanted to resize the original pieces so they were all roughly the same size, but ended up remodeling most of them from scratch so I could adjust their shape as well. The gold bar is modeled after…
Edit 3/1/26: I don't know what I was thinking not making lids for this. Lids for all boxes uploaded now. This is a simple insert for Wingspan Asia. We wanted a portable 2 player version that's easier for travel, so housing this in the…
Print the following parts: 1x Automa Divider 2x Birdcards 1x Bonus Cards Container 1x Bonus Cards Lid 1x Eggs Container 1x Food Token Lid 1x Food Tokes Container 1x Nectar & Dice Container 1x Nectar Lid (2x Lid ) or (2x Lid alt ) or (1x…
I searched the Thingiverse offerings to collect together nine different bird models suitable for Wingspan bird tokens. Bird .STL files were scaled to a convenient size for the game, and in some cases bases were added to make sure the…
Flexible spanner holder for spanners in different sizes. The asymmetric fork part of the holder make it possible to have different setup in your spanner drawer. Gridfinity is an open source storage system developed by Zack Freedman. For…
Keine Lust mehr die Spanngurte händisch auszuwickeln? Dann ist es allerhöchste Zeit meine Aufwickelhilfe für den Akkuschrauber auszuprobieren. Ich habe zwei Varianten erstellt: Spanngurte von 35 bis 50mm Spanngurte 50 bis 75mm PLA…
This is a cute accessory for the table top game Wingspan. It is meant to hold the eggs which are used in the game. This model is a remix of a model from Thingiverse by “njeff” which has a lot of horrible overhangs which make it unfriendly…
Tired of your Wingspan cubes moving around on your End of Round sheet? Try out this Double Sided End of Round Goals Frame - Choose which side to play on and make sure your pieces don't move during play. *Update 2022-02-16 (Prusa Site…
This is inspired by and partially modified from jae_aytch's original project . This version has a magnetic lid using 6x3mm magnets (6 x ~2.75 actual, super cheap on Amazon, etc). The lid also doubles as a bird tray including, optionally,…
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
Update February 4, 2026 : Today I posted an updated version of the Nesting Box insert to accommodate everything through the Americas expansion. You can view the new version of the insert here: I left the original version posted here in…
UPDATE 22 May 2026 Click here for the New Model for Finspan with Sharks and Reefs that supports sleeved cards. The model below suits Finspan Base Game. Please be aware that the remix by Mavis does not support premium sleeves. FINSPAN:…
This is a wooden replacement bird feeder (dice tower) for the Wingspan board game. The tower and lifts off of and lays inside the dice tray for storage. There are 2 versions, one without the logo (pictured) and one with a more detailed…
Werkzeughalter für Kegelsenker, kleine Gewindebohrer usw. Die Spannzangen entsprechen ER16-Spannzangen. Sie haben einen Spannberich von ca. 0,5mm nach unten, d.h. so könnt ihr zum Beispiel einen 3,3mm Bohrer in der 3,5mm Spannzange…
I designed this fan edition myself and made minimal changes to the original rules: The “normal type” (star symbol) is not meant to be printed, but is instead used as an energy "wildcard". This means that if a die is rolled as a normal…
This is a simple remix of Assembled Birdfeeder to make it fit nicely in the box. I notched the roof and lengthened the tray so the tower will rest neatly in the tray. See my full set of Wingspan magnetic organizers: Resource Box Card Box…
Dies ist ein Remix von Lukass' Electric pole raillroad 1:87 H0. Der Mast wurde verstärkt und vergrößert. Es wurden unten Befestigungen zugefügt. Zusätzlich wurden Halterungen eingefügt, um alte Märklin Querträger und Ausleger zu…
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
🐶 Agnes: The Adorable Cavalier King Charles Spaniel – CHIBI EDITION Meet Agnes , a stylized "chibi" version of one of the most beloved dog breeds – the Cavalier King Charles Spaniel! This figurine combines the elegance of its royal…
This is a spaniel dog head and is a very simple print with no support or rafts needed.
A model I made for the key chain competition as a tribute to my mechanic brother who is always tinerking and always missing his 10mm
Complete re-design of real1up 's “Wingspan Organizer (Basegame + European + Oceania)” that is accommodating for sleeved cards. In order to make enough room for the sleeved cards, the original player boards will have to be removed. This…
Die Einsätze sind leider von Modell zu Modell verschieden. Also einfach vorher vergleichen. Ausgemessen und mit Fusion360 konstruiert.
A remix of a very nice model. This now fits a full set of spanners from size 6 - 32mm. E.g. the “BGS 1196” set fits perfectly. Printed in two parts, the large one just ever so slightly fits for the regular sized BambuLab printers (256 x…
A simple card and resource holder I made for playing Everdell and Wingspan. Could be used for a variety of board games.
Simple and compact mount for flat wrenches. I designed these for the JAEGER 24pc IN/MM wrench set (https://amzn.to/3CKJVat). Use the included Fusion 360 file to customize for your wrench sets. Use a simple color change to create the…
The enclosure for Sonoff NSPanel Pro with IEC C8 AC socket for convenience remove the mainline or for optional inline AC switch. The enclosure is designed with minimum overhang for print without support. The screen angle is 45 degrees. 🚀✨…
A 10x4x6 Gridfinity Tray to hold spanners from 22mm down to 5.5mm in 1mm increments (except the 5.5mm) It Fits my Bacho spanners nicely but doesn't fit my RS pro spanners (they are too long). Its not quite stackable The 22mm spanner is…
This insert for Wingspan fits the base game, the European Expansion and the Oceania Expansion in the base box. Its a tight fit, but offers still quick setup and a well organized table. The Box closes completely if the backs of the…
Large and small holder for NSpanel PRO Sonoff
This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his wrench and didn't want to wait for the entire thing to print each time (all the important stuff is in the…
Adapterplatte für die Installation des Sonoff NSPanel Pro 120 PW auf Standard 68mm Unterputz Installationsdosen mit 60mm Geräteschrauben abstand. Der Adapter funktioniert sowohl für die horizontale wie auch vertikale Montage. Eine leicht…
The perfect printable bird feeder (dice tower) for Wingspan! Disassembles to fit in the box Sounds great Please follow my profile here and my Instagram at https://www.instagram.com/HRM_Studios If you enjoy my work please consider sending…
A quick soulution for the annoying task of strap rolling. Assembly order as shown on the photo. Printed in Extrudr NX2 PLA Recommended in PETG, ASA, PC or Nylon for better strength. 4-6 Perimeters 4-6 Top / Bottom Layers 15% Infill…
I needed a clamp that exerts force even when there's little material between the jaws, or that has more force than other clamps. So I designed a clamp with separate jaws that gains preload through the thick jaws. Additionally, it looks…
(Please see the original model for more information) No more moving cubes: With this frame you can keep your cubes where they belong, even when someone bumps at the table. It has both sides covered: You can use the blue side or the green…
Why would you print my insert instead of the 700+ Wingspan inserts already designed? I genuinely do not know. I wanted a combination of several different inserts as I was searching, and so I made my own using the things I liked best. Hole…
Updated version can be found at https://www.printables.com/model/362245-wingspan-token-stash If you like my work, and have the money to spare, feel free to buy me a coffee (or rather tea): https://www.buymeacoffee.com/Pellebeck
Small tool to adjust the bed corners and hold the knob in place while tightening the lock nut. I found that adjusting the level of the bed was a bit of a struggle for me: Because I have big fingers and those little knobs are difficult to…
A lightweight "aero" 16mm open wrench/spanner. Tested it and it didn't work, it slips when under load.
Overview: To replace the tokens in a Wingspan game you have to print 29 of the base resources (i made 30, so it's a round number) and 70 of the nectar resource. You should use different colors of filament if you can help it. Painting them…
Magnetic boxes to hold player tokens and food during play as well as a box to hold goal and automata cards. Designed to fit with my full set to completely organize the Wingspan box. Magnets are 6x3mm which actually come out to about…
The model consists of three parts: a card stand, a food holder, and turn holders. All parts are connected with glue. On the bottom side of the holder, there is a hole for an 8mm weight, 68mm long, glued in place, serving as a…
I wanted multicolored resouces for Wingspan with color on both side. Original project was perfect, but those tokens was too big and too thin (3mm). So I resized them to 80% but made them 5mm thick while keeping 0.6mm top and bottom…
I was searching for a solid tensioner for my clothesline in the basement room but didn't find a thing i like. So i created one witch meets my expectations. This little thing is very easy to print and tensions ropes and lines for camping,…
Various Organizers compatible with Drakka01's original designs. Food inventory can be stored in the top and bottom sections. The center section holds the player pieces and has numbers at the bottom to indicate the number of turns left.…
Use a strong print file with 4 walls and 20% infill or higher, print flat as is
Extra eggs if you play with people who like to lay eggs Remix of egg by Thomas Strawn https://www.myminifactory.com/object/3d-print-easter-egg-61634 I was able to print with no infill and no support.
Made a functional insert for wyrmspan that works with the deluxe tokens. Does not have space for card sleeves, I would have to redesign most of the insert to make it compatible with sleeves. I printed this one with 15% infill and…
Enclosure for a Sonoff NSPanel Pro 120 . Couldnt find one online so i made one in fusion . Used some heat inserts for the plate mounting
# Tool free tensioner Name and specification | Quantity -- | -- SHCS M5x30 | 4 M4*0.7 T Nut | 4 HHCS M4x16 | 4 D4x7x1(4x8x1)Flat washer | 4 M5 Hex Nuts with Lock | 4 bracket | 2 tensioner | 2 bracket image | 2 tensioner image | 2 wheel |…
This is a refined version of my original token stash for the Wingspan board game. There are two different versions and two sized for each version. There is now a threaded lid so that it is secured properly. 5 - Token stash: Holds all food…
I made this as a joke gift for my wife who's a big fan of the A Court of Thorns & Roses book series. If you've read it, you'll get the joke. This may require a smaller nozzle to print the lettering decently, .03 or .02
The dragon coins feature dragon scales on one side and a dragon wing on the other. You decide which is heads and which is tails. They are perfect for upgrading cardboard tokens from games like Wyrmspan. I designed the coins in Fusion 360…
Cable hole is on the right side, but if you need to have in on the left, just mirror the object in your slicer before printing.
A small spanner (wrench) for SMA connectors for SDRs etc. Obviously it's not super-strong, but it's useful for tightening or undoing the connectors to finger-strength in tight spaces.
Originally made to house Gear Wrench metric set (see original thing). I remixed to fit on my print bed (Tevo Tarantula Pro - 235mm). Had to remove the slot for the biggest spanner. Remixed from: https://www.thingiverse.com/thing:4689946…
With the arrival of the Wingspan nesting box, there's a higher player count and more colors. I didn't see any birdhouses for that count (to add to the great designs already out there), so I made a few options. Printed .12 layer height…
Wenn sich nach einiger Zeit der automatische Auslösemechanismus nicht mehr funktioniert, muss die Feder im Inneren nachgespannt werden (Vorsicht). Das hier bereitgestellte Werkzeug kann mit einem großen Schraubenzieher genutzt werden, um…
These Wyrmspan tokens can replace the various cardboard resources and cube markers that come with the game. One benefit is that you can just print more if you tend to run out of resources in those large-player games! Or, if you want…
