Search results: spraycan

Sort order

42 models

P
PrintablesChujuPrints

HSW 3DLac spraycan holder 53mm

Remixed this can holder for the HSW because it didnt fit my 400ml and long spray can. modeled after 3D lac

Downloads
209
Likes
25
Rating
5
P
PrintablesRaphael

Spraycan holder

Thanks Pa Ma for the great design. I modified it to make it mountable with screws there are 8 sizes

Downloads
138
Likes
21
Rating
5
P
PrintablesHM

Spraycan holder quadro 70mm

Reworked the original tripple holder, and made it slightly bigger, to make better compatibility with wither range of cans 7 cans version will also be available Print time approx 8.25 hours, 0.25 layer height Esun ABS+

Downloads
137
Likes
11
Rating
0
P
PrintablesMike Foged

Spraycan holder

Recomend to print in ABS or ASA Rafts: No Supports: No Resolution: 0.2 mm Infill: 40% Perimeters: 4 Solid layers top/Bottom : 4

Downloads
135
Likes
20
Rating
0
P
PrintablesGodnamedThor

Spraycan holder

can be mounted under boards or on the side of cupboards.

Downloads
134
Likes
22
Rating
5
P
PrintablesHM

Spraycan holder 7

Made a 7 can version for my service car Print time approx 12 hours 0.25mm layer height Esun ABS+

Downloads
132
Likes
18
Rating
0
P
PrintablesOystein

Skadis Spraycan Holder 2 or 3 can variants

Holder for 3 spraycans/cups etc. for skadis pegboards 69mm hole diameter fits most spraycans i have. Built in hooks require supports Added a 2 can variant

Downloads
116
Likes
13
Rating
5
P
PrintablesOystein

Pegboard spraycan holder

Holder for spray cans holder for mounting on biltema pegboard (or other with 12mm hole spacing 4mm holes, model has 108mm c-c hole and peg spacing) Files with and without lower supporting pegs for wall mounting with screws as well. the…

Downloads
105
Likes
26
Rating
5
P
PrintablesMbrinch

3x Spraycan mount

Easy to mount spray can holder for 3 spray cans. Printing: Pla 0.2mm layer height 25% infill Remove supports after printing is optional

Downloads
93
Likes
25
Rating
5
P
PrintablesJW693D

Spraycan holder, snap-in and fully parametric

Spraycan holder for spray cans or other round cans with a diameter of 53, 58 & 66mm (all the sizes I had in my metal can collection). The can is held in place by the snap-in clamp and the weight of the can is supported by the lower part…

Downloads
90
Likes
17
Rating
5
P
PrintablesStratumEngi

Spraycanholder

This setup uses a SKÅDIS wall with custom spray-can holders that keep cans upright, organized, and easy to reach. The holders clip securely into the SKÅDIS grid, allowing flexible positioning and a clean, efficient workspace. It’s a…

Downloads
89
Likes
34
Rating
0
P
PrintablesJW693D

Spraycan holder, magnetic and fully parametric

Customizable holder for spray cans or other metal cans . The can is held in place by the magnet and the weight of the can is supported by the lower part where the bottom ring of the can sits in a notch. Easy to take out and put back.…

Downloads
84
Likes
20
Rating
5
P
PrintablesJohination

Spray Dosen Halter, Spraycan Holder

Habe die original Datei verändert um es an meine eigenen Magnete anzupassen! Außerdem habe ich die untere Winkel Auflage verlängert und verstärkt! KEINE SUPPORTS NOTWENDIG! Magnet: 10mm Durchmesser 2mm Dicke

Downloads
72
Likes
15
Rating
5

Spraycan stand / Spraydosenständer

Ich hatte das Problem, dass ich in meinem Regal mit den Spraydosen immer wieder den Überblick verloren habe. Also habe ich eine Möglichkeit gesucht die Spraydosen übersichtlicher zu lagern. Das ganze möglichst als Bausatz System, also…

Downloads
70
Likes
25
Rating
0
P
Printableslfpoulain

Spraycan Holder 69 and 64 mm

Nous avons conçu et amélioré un système de rangement pour aérosols spécialement adapté à notre cabine de peinture DIY. Initialement basés sur un modèle existant, nous avons ajouté des modifications structurales pour améliorer la rigidité…

Downloads
69
Likes
7
Rating
0
P
PrintablesKerndrup

Holder for spraycans

Holder / Wall mount for spraycans with a diameter of about 65mm or 2.55 inches (standard sizes.)

Downloads
68
Likes
16
Rating
0
P
PrintablesArmin
Downloads
68
Likes
5
Rating
0

Stackable spraycan holder

It is recommended to print two for each floor for more stability. Still not sure that the joint fit perfectly because I have not yet printed the second floor Print with 10-20% infill and 0.2mm layer height. No supports needed.

Downloads
63
Likes
6
Rating
0
P
PrintablesJNH33

Spraycan Nozzle Holder

This is my first ever design! I would get frustrated trying to use the flimsy piece of tape used to secure the nozzle for spraycans over and over; it gets dirty and loses its adhesiveness and eventually the nozzle can come loose and get…

Downloads
59
Likes
14
Rating
5
P
PrintablesHeine Sørensen

Spraycan holder (No rattle and side movement)

There are many can holders out there but many of them is not usable for mechanics on the move because they do not “hold” the can and stop it from ratteling around in the car / truck. note there is a small recess on the backside for dubble…

Downloads
58
Likes
11
Rating
0
P
PrintablesArmin

Spraycan holder / Spraydosenhalter

Erste Version meines Wandhalters. Bilder folgen

Downloads
56
Likes
9
Rating
0
P
PrintablesDrexoll

HSW Spraycan/IPA bottle holder

A remix to make this holder work with Honeycomb wall storage.

Downloads
51
Likes
6
Rating
0
P
PrintablesKK Engineering

Spraycan Holder Wall Bracket

Wall mounted spraycan holder, with spot for magnet for better can stability.

Downloads
43
Likes
5
Rating
0
P
Printablestheazum

Spraycan Holder

A Simple Spraycan Holder

Downloads
42
Likes
5
Rating
0
P
Printablesomar

spraycan

spraycan w eye

Downloads
41
Likes
0
Rating
0
P
PrintablesFrandsen

Magnetic spraycan holders

Variety of different magnetic mountable spraycan holders. All 4 fit standard 66mm spraycans.

Downloads
34
Likes
11
Rating
0
P
Printablesstoffies00711

Aerosol / Spraycan Holder for Multiboard & HSW

Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…

Downloads
33
Likes
3
Rating
0
P
PrintablesMarrrrtthias

Spraycan holder for heavy duty shelves

put some M4 heat set inserts into the folder and screw on the little plastic washer. then you can easily mount them on common heavy duty shelves often used in basements, garages or workshops. I mounted them on some shelves from Obi…

Downloads
29
Likes
1
Rating
0
P
Printablesuser 404

spraycan holder

2 put spraycan on wall

Downloads
20
Likes
3
Rating
0
P

Skadis Tray Aerosol _Spraycan add-on 4 cans

SKÅDIS Aerosol Spray Can Add-on – 4 Cans An add-on designed for the IKEA SKÅDIS tray, article number 805.699.41 , to keep aerosol and spray cans organised and easily accessible. The holder accommodates up to four standard 68 mm diameter…

Downloads
18
Likes
3
Rating
0
P
Printablesrynn

Parametrized FreeCAD glue-on spraycan tube holder

Simple FreeCAD file to generate glue-on tube holders for spraycans. Parameters in the Parameter -Object ( DynamicData ) are: Parameter name Explanation CanDiameter Diameter of the spray can StrawDiameter Diameter of the holes for the…

Downloads
17
Likes
0
Rating
0
P
PrintablesJohn öhrberg

Spraycan wallmount (3 cans)

Spraycan Wallmount Holder (3 Cans) Inspired by an existing design, but I fixed the flaw: side-pulling cans needed empty space on one side. My shorter cradle lets you lift cans straight out – no side clearance required! Two versions…

Downloads
14
Likes
1
Rating
0
P

Zap-A-Gap spraycan holder

Holder to keep the CA glue and activator together. Fits various spraycan sizes, and a 1oz (28.3g) glue bottle. If you print this, a make would be highly appreciated!

Downloads
14
Likes
2
Rating
0
P
Printables3d prints

Spraydose Schutzring Spraycan Protective ring

DE: Moin ich habe hier mal fix was Design für‘s transportieren von Sprühdosen ohne das die caps verloren gehen. es funktioniert super für montana cans und andere dosen. Druckwerte: Material: Pla Infill: 5% Bei Fragen mich gerne einfach…

Downloads
13
Likes
0
Rating
0
P
PrintablesPrinzpaulaner

Spraycan Spray Aid

M5 Screw and Nut

Downloads
11
Likes
0
Rating
0
P
PrintablesLuXXus

Skadis-SprayCanHolder Mini Version

Made a small Version for very smnall bottles

Downloads
9
Likes
1
Rating
0
P
PrintablesNGC3982

Pegboard/Skådis spraycan holder with size brackets

Summary This is a spray can holder with brackets to be used on a IKEA SKÅDIS pegboard. The holder has a 66 degree tilt and is stackable sideways (and of course vertically, depending on what bottle you are using). The holder comes with a…

Downloads
9
Likes
1
Rating
0
P
PrintablesFrank Delporte

Spraycan holders

Quick drawings for 3 x 7 cm and 4 x 5,3 cm spraycans and bottles.

Downloads
7
Likes
0
Rating
0
P
Printables

Aerosol / Spraycan Holder for Multiboard & HSW

Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…

P
Printables

Pegboard/Skådis spraycan holder with size brackets

Summary This is a spray can holder with brackets to be used on a IKEA SKÅDIS pegboard. The holder has a 66 degree tilt and is stackable sideways (and of course vertically, depending on what bottle you are using). The holder comes with a…

P
Printables

Aerosol / Spraycan Holder for Multiboard & HSW

Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…