246 models
Parametric glue spreader. No need to go to the shop. The print files all have teeth glue lines 1,5 - 2,5 - 3,5 mm. The shape of the glue line is triangular. The FreeCad file is included so you can modify this trowel exactly to your needs.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Pop-up credit card wallet spreader with Tile Slim holder
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
These holders for 2 or 3 Bonne Maman jam jars are specially designed to prevent the jars from knocking against each other when opening or closing the refrigerator door. To suit all refrigerators, two models are available for two or three…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
BORING Putty Knife & Glue Spreader - Set If you're renovating or do bigger glue-ups, this set will be perfect for you. We made them primarily because you never have one of these when you need it the most. But also because I aint gonna…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
This is a remix of the popular Modular card wallet by CHKING. I've strengthened the sides a little and added a slick storage compartment on the back which keeps it nice and slim. This wallet version is only for 6 cards. Small magnets can…
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
This is a slight remix of the remix done by Mike_111723; original modular card wallet by CHKING. What I changed: Edited the Middle Section to be 3mm thinner, now only measures 3mm vs 6mm. Added key ring to the Middle Section. Edited the…
Update 2023-04-30: On request I have modified the design (V2). Several sharp edges have been rounded (as good as Fusion 360 has let me directly). Also I have changed the extensions and the lid. They have 45 degree chambered edges and it…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
The source marked this model as adult content.
Here is a handy cup style spreader for sidewalk salt. Simply fill with your preferred ice melt product and use like a giant salt shaker. Or you could also use it to spread anything that comes in granular form.
Filling lot's of mortises with wood glue before a glue-up is slow and tedious. These caps screw on to most PET bottles and make glue filling mortises for Festool Domino's a lot easier and faster. I use it only with white or yellow PVA…
Epoxy mixing spatula & spreader Combined stirrer, applicator for the Epoxy Work Station I joined the tools to make one tool instead of two. I increased the thickness of the tool ends to make them less floppy and reduced the thickness of…
Four sided adhesive spreader with three different notch patterns. Each side is labeled, just in case you are super interested in the exact spacing of your glue. I know I am. Print with some filament that you don't mind getting glue all…
The spatula has 2 usable edges that can be adjusted to your needs. Due to its parametric design it can be any size, from tiny for model kits to big for woodworking for example. --- Erratum (03/06/25): Addition of a make and a Bambu Lab…
Depending on orientation and printer capabilities this may require a small amount of sanding to ensure no “rough” edges (nothing even close to what it would take to cut a bridge line. Please drop a make or comment so this design can…
2024/03/15: Added a larger version. HO scale model train ballast spreader.
Have you every thought to yourself; “Man, this ballasting work sure is tedious and messy and due to my infomercial like clumsiness i simply just don't possess the basic human arm motor-skills. There has to be an easier alternative!” Well…
I believe I printed top down I printed with ASA and have been using it for about 1 season so far with good results.
Applicator for applying and smoothing spackle to fill drywall holes and cracks. I tried several hardness vs flexibility for the blade and 0.5 won out. No supports or brim needed. Printed on my Prusa MK3S+ in about an hour and a half so I…
For whatever reason, I couldn't really find any good models online for putty knives or plastic spreaders, so I made this quickly in Fusion 360. I specifically needed this to spread caulk on a drop cloth to make a battle mat for our DND…
Those small glue spreaders print in a few minutes. There are four different comb sizes: 8 teeth of 1,3 mm 8 teeth of 2 mm 6 teeth of 2 mm 9 teeth of 2 mm The good news is that you can modify the FreeCAD file to your needs. It is fully…
A set of six spreader plates for smooth and consistent silicone finishing. Three plates feature concave radii (fine, standard, large) for common inner corners and joints. One plate has convex radii for outer corners, and two plates are…
A screen printing scoop designed based on some I have seen on the market. I wanted to print my own so I designed one. One side is round and one side is sharp. There is also a ridge on each side for easy grip. Print the middle piece at…
For size to models of @MrHanjak tractors use 350% except the drive only 250%
My friend's dad kept losing the original hopper paddles for his walk-behind spreaders. These fit snugly on the hex shaft and also drop down 1/4" into the hole in the hopper to minimize the slop in the shaft. These were printed in PLA and…
a salt/icemelt spreader cup. Comes in 3 parts the main cup/ the selector and the scoop/spreader this should make replacing parts if something breaks easier as-well as printing just what you want. Update: added more clearance to the…
A versatile spreader designed for salt, seeds, and other granular materials. 🔄 Includes 6 interchangeable lids — 5 with different hole patterns + 1 fully closed lid 🌱 Perfect for planting grass, distributing seeds, or salting icy paths 👌…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
This is a spreader bar for a model crane. I designed this to work with m3 screws on the buckles and to be easily printable on an FDM printer, while being strong enough to hold your scale loads. Make sure you rotate the buckles so they're…
Just a simple Tinkercad remix. I wanted a bevel on the end of the glue spreader, so I added one and made the handle rounded at the same time.
Needed a cleaner design. The spreader width is slightly adapted for any chosen tooth size to accommodate only whole teeth. The provided stls measure roughly 100x60 mm. The parametric Fusion source file is now also available.
Fully compatible with FDM printers, NORMAL SUPPORT REQUIRED for little bridges
The end-all of glue spreaders. Change one parameter, and it will remake it to your desires. Includes auto braille! Uses FreeCAD as the main parametric platform. It is free , so editing won't cost anything. All parameters are customizable,…
These little wedge spreaders -now 50% littler!- will help you keep the calipers of your disc brake system apart when you take your wheel off, and when not helping you do that they'll clip together to store neatly and efficiently wherever…
A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…
I've included STL, STEP and Fusion 360 files if you would like to edit. 6mm x 6mm. I printed in PETG but would work in most materials. 0.3mm layer height
N gauge oo gauge ballast spreader for model railways railroad
Use to mix and spread your texture paints around or anything ketchup?
Hi there, Presenting my latest “masterpiece”: a spatula and glue spreader set! I've kept the model as tiny as possible to save your precious filament and minimize print time. After all, who wants to wait forever for a few handy tools,…
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
A simple model used to spread wood glue on woodworking projects. I added a couple of fun glue-related puns because I love puns. I hope it makes you smile as much as I did when I printed it out and gave it to my buddy!
Tired of wrestling with your book when you just want to read hands-free? I designed a print-in-place finger ring that spreads the pages open wide while staying super comfortable to use. ✅ Print-in-place – no assembly needed ✅ Minimal…
Spare parts for the "Rauch" fertilizer spreader models ZS, ZSA, and ZSN (others may be compatible as well)
If you're not sure which size to print, I recommend starting with the 4in model as it's more versatile. I found the 6in version to be too large and unwieldy when gluing 2"x4"s together. I printed mine in PLA with 3 perimeters, 4 top and…
Had one of the springy parts of the "middle-section" break and noticed it was designed with sharp 90 degree cuts at the weakest point(which is where it snapped). So I added fillets to hopefully improve longevity of the part. I also cut a…
Infill=60%-90% because it will bend and you don't want it to snap. Quality=0.20 doesn't matter but that's what I did it at. Support's=don't need them.
I used blue PLA at 0.3mm layers and 15% support cubic infill. Designed for a surgical glove size 9 hand, or a medium nitrile glove-sized hand.
0,2 layer height 5 wall 4 bottom 4top layers
Another glue spreader for the festool Domino DF500. I Made it to suit to our glue bottles from Ponal. Using this glue spreader only makes sense if you do bigger glue ups… for one or two domninos, the cleaning afford is to much…. With a…
This spacer is specially designed for bicycle brake systems, which can support it and prevent it that has no effect to brake. Using on-wheel removal, adopts a professional design, great for bicycle repair, and will bring you a much more…
This book page spreader is designed with a very soft bevel on all sides, an enlarged thumb hole, and is extra wide. While technically not a "remix," I totally copied the design from this product I found on Amazon (see last image). My…
Use it to spread salt outside in the winter time. 1/12/17 Update: Customizable.stl is a version with no holes for those who want to make their own holes. Use a drill or your 3d modelling software of choice. Just make sure your holes fit…
1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.
Manure Spreader - 1:16th Scale Uses M2 Screws and 6.4mm diameter x 138mm(1/4in diameter x 5-7/16in) rod for axle 1.75mm TPU can be used for hydraulic hoses
Beach tents are great! But, they start off nice and tall and through the day they shrink and go saggy! - because the poles sink into the sand. This is a simple spreader and grab base that slips on the pole-end. Stops the pole sinking and…
My Celestron CPC 9.25" EdgeHD had two of three of these clamps broken. Celestron will send you new ones but it's difficult to get them to work with you. The original clamps are a one piece loop but I didn't want to have to take the legs…
* Not only did I sand the edges when the print was done, but I also covered these in duct tape to protect the neck during use (it does pull against the neck). You could probably also use some kind of foam or felt and hot glue or something…
Epoxy Spreader with 0mm - 3mm - 5mm Teeth Dimension: 50mmx50mm Useful tool for spreading epoxy over a surface to be bonded.
A Device to spread Gingerbread dough on wafers. Its a original German Christmas sweet. This Device consists of different parts. But you only need to decide on one plate size. Have fun
I printed the back with clip mount with 4 walls and 15% gyroid infill. The money clip is printed on its side in PETG and 6 walls (shouldn't be any infill) and .2 layer height, with a brim and no supports. The clip with the cutouts on the…
We have a Scotts Turf Builder EdgeGuard Mini Broadcast Spreader for spreading fertilizer and weed killer on our lawn. The problem is that lots of the early season weed and feed type fertilizer is supposed to be spread when the weeds are…
Front cover with no hole
Applying glue evenly is crucial for strong and durable joints. The 3D printed glue spreader is designed to help you achieve a uniform application of glue, ensuring your joints are as strong as possible. Its ergonomic design makes it…
This tool is safe and easy way to spread jammed pistons on Sram brakes. Just insert this tool and pry pistons in with large screwdriver. After that you can just pull brake lever and this tool will return pistons back in because it work…
A simple thermal paste spreader
Entirely reparametrized the original .STL file by @Mikester for the top part (card-wallet-top.stl) to get a proper NURBS geometry editable .STEP file . Closed the viewing hole to create a blank surface for further personalized REMIXES.
Replacement Micro Bar Clamp and Spreader pads for Irwin Quick-Grip & Dewalt. Printed on end with no supports in flex TPU at 0.3mm.
Spatula handle/ trowel or spreader i don't know what's it called, but here it is. Hight. 100mm Wide. 150mm Thooth. 2mm
This spreader has two notched sides. The larger notch is 6x6, the smaller is 4x4. Increase the thickness if you want to use a stiffer spreader.
Spare parts for the "Rauch" fertilizer spreader model ZSB (others may be compatible as well)
For clamping your filament spool to prevent the loose end from crossing or tangling. I like the design concept by ishikawa, but decided to take the design in a different direction. Still a print-in-place design. There are 2 versions:…
slightly rounded notched spatula / adhesive spreader. You can easily print it in PETG or PLA and it also fits to smaller printers as is Prusa MINI there are circles on bottom plane that could help a bit with shrinking
Simple instrument for making crepes & pancakes.
This replaces the Chapin auger on the 80 and 100 pound salt spreader. It may be able to replace ones in other models of Chapin spreader. Replacement screws on shaft and uses retaining nut from old auger.
Part designed to be placed on top-shroud above the spreaders. It will spin freely and prevent the sail from touching the spreaders. Desinged for 6mm shrouds, but you can scale it as you like, also adjust screws to bigger size. Print from…
ÖRTFYLLD Spice jar enjoy, and like if you like it . If you want other holes dimensions let me know Make also a make and post your pictures of the print. also please look at my other prints. Mick | Printables.com
Printed from PETG, used for about a month.
The source marked this model as adult content.
Scrape Spackle with this! Suggested use: Base for a business card for a painter or handyman.
Remix of the amazing wallet by Mike (itself a remix). I only modified the magnet holes to fit my existing magnets of 5x2mm. Please download all remaining parts from the original model.
Spatulas, Scrapers, and Thermal paste spreaders had to remix since most of the original files where non-manifold and didn't have the numbers on them.
Design Concept The bike brake pads spreader is designed for cyclists who frequently need to maintain or adjust their bike's braking systems. Its bright color ensures that it's easily visible and not easily misplaced among other tools.…
I got a scotts elite spreader and the mixer pin bent instantly on me, So I made this one. This paddle will work as long as you're spreading something light. If you're spreading something dense/heavy, you may want to decrease the size of…
A shaker insert for the Ikea Citronhaj spice jar set Ein Streuer Einsatz für den Ikea Citronhaj Gewürz Streuer Update: Added 2 new Files with 1.8mm holes instead of 1mm holes for rougher spices
Replacement Paddle/Spinner for Scott's brand Wizz battery powered seed/salt spreader. Original falls off easily. This replacement snaps on firmly.
Keeps all the light stems spread out instead of flopping over to one side.
The source marked this model as adult content.
Introducing printable and fully working Salt spreader for 3D sets cars Find out more under this link: https://www.printables.com/model/684293-3d-printed-salt-spreader Detailed instructions are available as well as BOM list This part is…
A spreader head for your watering can. Use a good brim, because of the low contact.
Customizable Notched glue spreader. V1.1 Openscad script. Select shape, tooth shape (square,triangular,prism,rounded) Width,Height. Optional logo (2 to choose from internal) 1 svg custom external Text Text and logo can be relocated.
This design is inteded to improve the original white paper spreader from the Casio F-91W. Print in a translucent filament you can optionally preform the Reflective LCD mod shown here :
Simple spreader that can be used to spread glue and other adhesives.
A VERY simple spreader … Basically, I was looking for a little piece of plastic that I could use to spread glue. Since it is covered in glue after use, I didn't want to bother with cleaning it and be able to trash it. So it had to be…
