838 models
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Overview Toothpaste squeezer to help get that last bit of toothpaste out of the tube. I've personally printed a couple for around the house. I've even had one get warped after going through the clothes dryer but it still gets the job…
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
A practical spring-loaded bag clip designed for quick sealing and strong hold. 🔒 Squeeze to open – release to lock – the built-in spring keeps it tightly closed 🍞 Ideal for bread bags, snack packs, or general household use 🟢 Available in…
Toothpaste squeezer for your almost empty toothpaste tubes. Slide your tube in the slot and turn the knob. Print as is without supports.
Use this cap and a bit of 4mm PTFE tubing to turn any common PET pop bottle into a squeeze-to-squirt “lab bottle”. Prints without support in any rigid material. Either cut the washer out of an old inner tube, rubber sheet or print in…
Another simple but elegant toothpaste squeezer ;-) Print Instructions Parts are oriented in the correct position Filament PETG (PLA maybe not) Nozzle diameter : 0.40 mm Default 0.20mm QUALITY PrusaSlicer Print Settings Perimeters : 3 No…
A funny toothpaste squeezer in mouth form that makes sure you get all the toothpaste out of the tube without wasting any. Print instructions Easy to print. I decided to print it in PLA with infill 50%.
You want to get the last bit out of your toothpaste tube without any effort. With this model, that's no problem anymore. Happy printing! Recommended print settings: Nozzle: 0.4 Layers: 0.2 No support Adjust the size of the model to fit…
A mechanical tube squeezer to print yourself. It works not only for the plastic toothpaste tubes but also for metallic ones, like for mustard. Some of the parts have to be printed with ASA or similar material to achieve the required…
This s a toothpaste squeezer remake from https://www.printables.com/model/26897-toothpaste-squeezer. A pair of strips was added to the original design to increase the squeezing ability of the model. A sample GOCDE file is attached for…
Add a touch of Star Wars charm to your bathroom with our adorable Grogu toothpaste squeezer! This cute and functional accessory is shaped like everyone's favorite little green Jedi, making your daily dental routine a delightful…
Please like and follow and post your makes. Use care. This looks like a knife but there is no sharp edge. The tip can poke so not for small kids. Use in the home. I made this goofy KA-BAR knife toy, but I like practical prints. So I…
It fits the sawyer squeeze to the hydrapak ultraflask (speed 600ml) threads. printed without supports, adhesion, and no cleanup. hydrapak threads: pitch 3.4 mm
A toothpaste squeezer that works great. I designed it to work with Colgate but it will work with others. Buy me a coffee! https://www.buymeacoffee.com/MK4EXPERT
Yes you did read the title correctly…😉 The design gave me the idea on how to feed the squeeze treats to multiple cats. Usually the missus and I take two cats each and feed by hand but that is still difficult (with eager cats). With this…
I first made this model for my STEM class at school, and I'm now putting it on here. Our objective was to create a fidget that can also double as a good exerciser. I made it because I play the piano as well as a few other instruments, and…
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Get every last drop of toothpaste out of the tube! The toothpaste squeezer grabs the toothpaste tube between the rollers. Turning the wheel will drive the gears and squeeze the toothpaste tube. Assembles without tools with a snap fit to…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
Made with meshlab and made to be printed without supports or any special settings, as a stress test for TPU printing.
This is a fun fidget toy that you can squish and squeeze. Make this with PLA. All the parts snap together and don't require any glue, but if you want the parts to be even more securely connected, you can still glue the Squeezer Cap to the…
Update 03.07.2025 I made another iteration of the rotor which you can find in the filesection and I will also update the assembly and printplate with that one. Added the note to print the shaft in 100% infill after the recomendation of…
With this practical cat food pouch squeezer , you can get the very last bit out of every cat food pouch — cleanly, easily, and without sticky fingers. Short on Youtube: Wet cat food pouches often leave a surprising amount of food behind.…
Simple remix of @spidersky1489 toothpaste squeezer to open up the hole a bit to allow it to hang and added another slot to thread the tube back to keep it from slipping out while hanging. Added bonus of the double slot is it keeps the…
🚀 Spin'n'Squeeze – The Ultimate Fidget Hybrid After printing NAM3Designs original " Fidget Squeezer " my kids and I were hooked. It’s a great haptic toy, but one thought kept spinning in my head: "What if this could actually spin?" So, I…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
10/12/2022: Uploaded the correct nut and lead. The first ones were mirrored. The drill was inspired by push drills such as this one by LoboCNC: https://www.printables.com/model/132326-push-drill-with-adjustable-chuck The chuck is based on…
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
Tired of wasting wet cat food left inside sachets? Cat Food Squeezer is a simple, practical, and fully 3D printable tool designed to help you extract 100% of the food from cat food pouches — quickly, cleanly, and without messy hands. A…
Inspired by sns13s toothpaste tube squeezer on Thingiverse, I created my own version of a tube sqeezer which is more sturdy and easy printable. I liked the exlicit lock of sns13s design (much better and more reliable than printed ratchet…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any. No Supports! Just a few grams! _______________________________ I added an f3d file for anyone out there who…
Can easily be pulled out if you are done with your condiments. No need for unraveling the whole tube again.
Comes in four sizes: 44.5mm slit 55.5mm slit 65.5mm slit 75.5mm slit Printed in PLA with 40% gyroid infill. Hook the bottom of the tube in a Z-shape through the slit to ensure the grip.
Reuploaded from Thingiverse Made by ottenjr Summary Printed in 3 parts. Cap can be securely pressed or glued onto shaft. I advise printing as a solid object. Should be wide enough to accommodate all toothpaste tubes while comfortably…
All components should be sized correctly as-is. I've individualized everything. I can compile them in a grid as one file upon request. Solid and easy to print helping hand setup for your desk or on the go. Components needed: 1x Body &…
Update: another improvement of the design for stronger prints (Feb 07 2026). See the pictures for the printing orientations I did not like what I had downloaded and decided to design my own tooth paste squeezer. There are two pieces, the…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
this toothpaste squeezer is very easy to use and print. The design is very delicate. When the knob is rotated, it will jam gently and make a clicking sound to ensure that the toothpaste tube rolled in will not loosen. Suitable for both…
Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…
I loved the concept behind Luke's 3D's original model but it didn't fit my daughter's toothpaste. I also found the model quite hard to assemble as the tolerances were tight and there was little to no horizontal expansion (elephant's foot)…
A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…
Cat food pouches can be frustratingly hard to empty. This cute squeezer is here to save the day and do so in style! Made for: Felix brand pouches Slot dimensions: 95 mm x 2.2 mm Print time: ~1 hour Printer used: Creality Ender 3 v2…
A practical little print that presses your toothpaste (or any tube) from the bottom up, squeezing out every last drop. Makes a perfect small gift for friends and family. Toss a few in a gift basket, print a handful for the holidays, or…
toothpaste squeezer, thanks to which it will always be possible to squeeze out toothpaste easily.
If gears are stuck, it might be caused by stringing or seam alignment(use random seam for best results), which can leave a ridge that causes jams. To ensure smoother operation, perform post-processing such as sanding down the shafts and…
Mine kept shearing and breaking apart in use - so I made the inside of the components with gears solid - this seemed to make it stronger. I printed with 20% infill.
Layer Height: 0.2mm Nozzle Size: 0.4mm Infill: 10% Printer: Ender 3 V2 Filament: 1.75mm Tangerine Orange Food Safe PLA https://filaments.ca/products/true-food-safe-pla-tangerine-orange-1-75mm?_pos=4&_sid=1dfbfef33&_ss=r
A toothpaste holder that holds the tube vertically and allows you to squeeze its content. Between the bottom cap and the central cage, you need to fit two springs to maintain tension. Then, you can glue the bottom cap to hold it in place.…
This is a simple Totoro-themed toothpaste squeezer. The opening is 60.62mm wide. The model is 117mm wide, 70mm tall, and 4.5mm deep. Add a couple extra walls to print the design faster (and for added rigidity). This is based the opening…
If you do not know what it is used for, then you probably don't need it :).
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Fidget Stretchy Flexi Squeeze Thingi I had no clue what to put into the searchbar for this toy. So I made it myself. The slats are very thin and short, so you may need a few tries. You may need to adjust the temperetures of the headbed,…
Update Improved tolerance for thicker tube edges Introduction My neighbor wanted one, so I designed it. No moving parts means no chance to break. Hope you like it. Print Settings Print in default orientation. No support needed
Want a squeezer that is simple, sits flat and doesn't distort the empty end of the tube? Here's your answer. Designed for a toothpaste tube that is approximately 54 mm wide. Scale the part in the X dimension to fit your custom tube. This…
Introduction:- This is fully mechanical, 3d-printable squeeze fan. Its only need your hand no electricity and battry needed. I designed this from scratch using Fusion 360 to practice cad :-) The Mechanics: Its a squeeze fan so its work…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
This is a remix of https://www.thingiverse.com/thing:1147252 because it was very wide. My remix is 55mm wide exactly what I need for all of the toothpastes. Support You can support me by liking and downloading my projects or you can…
What makes this squeeze fan unique? This squeeze fan uses a printed ratchet and spring to allow the fan blade to spin (mostly) freely without forcing the movement of the squeeze handle. All parts are 3d printed, except for two M3 screws…
This is a modified key squeezer for hand creams in metallic tubes. I needed a shorter and especially narrower gap. Several sizes are provided together with the original ones. I can create additional dimensions upon request.
Toothpaste extruder with suction cup support base - Exprimidor de pasta de diente con base apta para ventosas
I created this assistive device to hold treat tubes! If you have any difficulty holding and squeezing the smooth thin tubes of cat treat paste - this device gives a good gripping point and applies even pressure to help you squeeze out…
Material: PLA+ Druckereinstellung: Layerhöhe 0,16 mm / Infill 80 % / Support Tree Print in place Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like würde ich mich freuen. Good luck…
I found that other toothpaste dispensers on Thingiverse required assembly or were a bit clunky in their design, especially around the part where you turn the cylinder in the middle and various locking mechanisms. Others didn't even…
Main filament should be PETG (for strength). The secondary ones can be anything, I used white and black PLA. No worries, they won't separate, the secondary components (eyes, whiskers, nose) will hold firmly in the main part. I printed the…
A simple holder for the honeycomb storage wall to hold these bottles that I put my IPA in. The bottles are 60mm diameter and the cup is 61.5mm ID for a little wiggle room. Here are the bottles if you want to pick some up…
REVISED 10/15/26: I updated the models to remove the corners. I was still able to print them without supports. ________________________________________________________________________________________________________________________ Simple…
To use line up the slot on the shell and nut and slide the end of a tube so the end slightly sticks out of the bolt. Then untighten the nut, slide the bolt out about 1 mm and rotate it to squeeze the tube. To lock it in place slide the…
This toothpaste tube squeeze roller is designed to simplify and optimize your toothpaste-squeezing experience. While many models require multiple parts and post-assembly, this design is fully print-in-place , eliminating the need for…
Remix of Ratchet toothpaste tube squeezer by Luke's 3D. Everything is the same except for: It can now fit up to a 65mm wide tube Removed watermark Increased tolerance on axle so it fits better (may need a tiny bit of sanding)
This cat food squeezer makes pouch dispensing easier and cleaner. It features an open edge for half-portion servings and a larger size for improved grip and comfort. I’ve tested it using PETG material, which is ideal for easy cleaning and…
Yet another tube squeezer designed in CadQuery and fully parametric/customizable for custom sized tube widths. CadQuery is a type of CodeCAD and is similar to OpenSCAD and is based in python. I have included several widths that should…
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
Gridfinity holder for the loctite super glue squeeze bottle. Zack's glue stick holder was too small by about a millimeter or two so I made this.
After trying several existent fan blades I modeled my own - now THIS thing seriously moves some air! Thin, curved blades, lightweight, 1:1 replacement for the original turbine. Plus a shorter “trigger” handle for one finger operation.
Modified the original model with the following changes: Elongated model to support toothpaste tubes up to 60mm wide Added stand to hold tube upright once it's short enough Added “fins” to help to squeeze the toothpaste more gradually for…
Soft cat food is sold in many places (Europe) in small soft squeezable pouches and just like toothpaste I needed some help it getting out that last little bit! I tweaked an toothpaste holder to a somewhat larger size.
Shortened 9mm to better match toothpaste tubes common where I live. Now fits tubes up to 60mm wide. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: Translucent blue printed in…
This is a squeeze fan that uses gears and a lever to bring you wind. Use this video to assemble:
Toothbrush Squeezer – Innovative Solution for Optimizing Toothpaste Use Introducing the Toothbrush Squeezer, a meticulously engineered accessory designed to maximize toothpaste utilization with precision and style. This model combines…
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
A remix of a simple toothpaste squeezer, with some hex pattern added to make it a little less boring.
The original by Luke's 3D was well received, but despite the gorgeous knurling, little fingers had difficulty turning the small handle at the base to twist it (especially when already wet!) This alternative handle is a direct swap-in,…
What makes it special I made this one for the small toothpaste tubes that always seem to run out on a trip. The big version works for a normal tube at home, but this travel version is sized for the mini tubes I actually pack. I included…
The famous Kenny from your favorite tv show! I modeled it from scratch.
3D Printed Squeeze Breeze (fan)! Looking for a fun and functional 3D printed gadget? Meet the Squeeze Breeze, the perfect tool to keep you cool! This innovative device is entirely 3D printed, requiring no additional materials. Simply…
Works on most toothpaste tubes. If the slot is too small, fold a piece of sand paper in half and sand the inside. If that is not enough, use a piece of paper to shim the sand paper wider (put a piece or two in-between the fold of the…
My mother asked for help with her eye drops, as her arthritis made it difficult to use. KuroiZubon 's original model was nice, but didn't fit my bottle. First time designing print in place hinges, so I'm not sure how long they will last.…
Designed to be functional and assemble without glue to use every bit of toothpaste that may be left Print instructions Everything was designed to be abel to print easily and to also assemble easily and be functional without glue although…
A rubber band needs to be placed in the grooves around the sides of the fidget and acts as the spring that makes this toy work. Stiffer bands will make it feel snappier while stretchier bands will make it feel squishier.
Einfache Modifikation eines Zahnpasterausdrückers. Viel Spaß beim drucken. Material Empfehlung : PETG 100% Infill für mehr Stabilität Druckzeit ca 27min.
