Counting matching models…
Dieser Saumanschlag ist für die Bernette 42 cover Lockmaschine konzipiert. Das design wurde selbst getestet. This hem stop is designed for the Bernette 42 cover lockstitch machine. (Translate with deepl)
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a fairly simple stitching pony that is fully 3D printer, no hardware required, but you're probably better off buying a wooden one for like $20. This one only allows for clamping of small projects, like wallets. This is the first…
remix of thing:4373872 by shihong86 Fixed it so it is more mechanically correct and uses M6 hex head nuts and bolts. M6 x 50 for the clam and angle adjuster. Table adjuster bolt length will depend on the thickness of your table but a 50…
A simple hand tool that helps you pull stitch chisels out of the leather without damaging anything. 60mm x 35mm x 40mm Very lightweight. Works perfectly with cheap beginner stitch punches/chisels. Leave a comment if you try it with more…
These stitch markers works same as your wing dividers for marking a stitching line onto the leather surface. The advantage is that these are set to the same distance all the time. You can change wing dividers between projects and you…
If you need a stitching pony for leatherwork but already have a bench vice, this is a simpler alternative that takes advantage of your vice! Just place your workpiece inside the plastic clamp, then place the clamp inside your bench vice…
Description This is a stitching pony for leatherwork / leathercraft or other stitching activities. It folds into itself for easy storage. It is designed to be a long-lasting item that can withstand some abuse while not breaking the bank…
Replaces the tightening screw of https://www.printables.com/model/1224263-stitching-pony-for-leather so that it can be tightened with one hand, leaving the other one free to hold the work piece in place. Furthermore, the screw design is…
This is a small awl for making small holes, using nail as a sharp tip. Nail is just put inside and the tool is screwed together. Safety cap for nail included. I made it because the commercially available awl in hobby market is too thick…
Use Case : If your bag strap originally had rubber or plastic strap ends but they already brittled and crumbled If you want to keep your bag strap from fraying at the ends (as an addition to melting the tips if it is Nylon strap, or as an…
I designed this holder for bobbins and needles. There are 12 slots that fit a threaded bobbin and a spot to insert a 2mm x 15mm magnet to hold needles.
Lost a button on my trousers and had no needle or thread at hand, so i came up with this idea. After printing (use PETG) just snap the button in place where the original button used to be. If the fabric is to thic, it might wont attach…
Template for curve stitching and embroidery on paper or fabric.
stitching pony for leather craft. materials: 2 pcs. M5x40 (or longer) 2 psc. M5 thread insert assembely: -put thread inserts into knobs -choose location to connect the base to the clamp -screw together
I am not a fan of stitching groovers, so I made these to mark my grooves. Just line them up on the edge and use a scratch awl to make your line for holes. I will eventually make some curved ones, but I mostly work with straight patterns…
stitching pony. use a bolt through the holes to hold your work while you sew. basically an extra set of hands. I use one for hand sewing my leather projects. If you see any issues let me know or remix it!
A simple thread organizer for stitching, 20 holes
Tool to help pull a leather pricking iron out of a piece of leather. Inspired by something similar made out of leather wrapped metal by Ethan Carter (https://www.instagram.com/p/CsmaGKEJja8/). I printed mine in PLA with 25% infill to make…
Over the years, I've gone through countless straight stitching guides, much like tape measures and cookies—they always seem to disappear just when you need them, haha! When it comes to choosing the right guide for your sewing machine,…
I used Onshape to design the model. If you want to remove or change the numbering, use this link to edit the file. Otherwise, the file type is .step, which I shared here —do what you like. Use whatever settings and materials you want.…
There are two versions of this: The short version - final version as asked to design by my spouse The long version - closer to the origin model, but with some tweaks… and mistakes on magnets Both versions were printed in PLA on a Bambu A1…
Fillers for your cross-stitching bobbins storage. 40x35x8 (mm)
My wife loves cross-stitching and I'm into 3d printing. That's it, bye!
Some different versions of cross stitch thread holders, should leave you enough you room to write the thread number above the holes. The 2nd version allows for a painters tape strip to be used so you don't have to clean as much to reuse…
A desk mount for the DREAM FACTORY STITCHING PONY. It may work with other stitching pony's depending on measurements. My desk used a 2x4 for the edge and the clamp for the stitching pony did not fit. Rather than cut the desk, I designed…
Designed this today and am waiting for the bike to come home so i can test it, will edit this out once tested. We have the older version rain cover for a 2017 Urban Arrow and the tent poles have both popped through the end of the rain…
This is a grip cover that can be styled while protecting the tennis grip. It is modeled with a leather stitching design. A key ring is inserted into the hook at the back for more diverse styling. and You can fix the cover by attaching a…
This is a grip cover that can be styled while protecting the tennis grip. It is modeled with a leather stitching design. A key ring is inserted into the hook at the back for more diverse styling. You can output using a flexible resin.…
This is a model for medical students to practice stitching/suturing
A clamp for holding pieces of leather while stitching them together by hand.
The spools are stored at an angle, so they do not drop out of the holder that easily. To get the spools out, tilt them horizontal. The holders are stack-able, but the top holder sits on the spools. About 0.5mm are missing. This is fine…
I was teaching myself how to lock-stitch with a Speedy Stitcher and needed a basic needle to help me thread. Simple as that, here it is. Enjoy! If you're enjoying models like this, consider supporting us on Patreon so we can continue…
Tool Holder and different size stitching wheel holder
Cover replacement with plugs, the original part broke and we designed it to fabricate with 3D printing. The cover was prnted in PLA because the zone where this assemble is not heat and the plugs or caps were made with TPU 85A beacuse it's…
A fully 3D-printable stitching pony designed specifically for leather craft and hand saddle stitching. This clamp combines quick-action work holding with customizable ergonomics. Key Features Single-Flip Cam Lock: A unified cam shaft…
Description This is a stitching pony for leatherwork / leathercraft or other stitching activities. It folds into itself for easy storage. It is designed to be a long-lasting item that can withstand some abuse while not breaking the bank…
I was teaching myself how to lock-stitch with a Speedy Stitcher and needed a basic needle to help me thread. Simple as that, here it is. Enjoy! If you're enjoying models like this, consider supporting us on Patreon so we can continue…
stitching pony. use a bolt through the holes to hold your work while you sew. basically an extra set of hands. I use one for hand sewing my leather projects. If you see any issues let me know or remix it!
