Search results: stubby

Sort order

323 models

P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Downloads
2,313
Likes
209
Rating
5
P
PrintablesMuddledRemarks

Super Stubby Nozzle for Milwaukee M18 Fuel Blower

Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…

Downloads
1,831
Likes
230
Rating
5
P
PrintablesMuddledRemarks

Super Stubby (SWEEPER) Nozzle for Milwaukee M18 Fuel Blower

Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…

Downloads
1,208
Likes
143
Rating
5
P
PrintablesNicos3DPrinter

Stubby coin screwdriver

A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…

Downloads
416
Likes
205
Rating
4.88
P
Printablessteve457

Rigid Blower Stubby Nozzle

This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…

Downloads
175
Likes
16
Rating
5
P
PrintablesArkmaster

Stubby Handle Siren Thunderbolt

This is a Small siren Thunderbolt it is designed for kids, which is why it has rounded corners and a small handle it gives the print a bit more durability than some of the other ones I have found online. The handle prints with supports,…

Downloads
134
Likes
4
Rating
0
P
PrintablesFreddyZ

LTT stubby drill

small ergonomic handle for ¼" keyless chucks or any other tool with a ¼" hex shaft. It's a simple pressfit with a 6.5mm modelled hex receptacle. On a Prusa Mk3s+ 0.3mm speed its a decent pressfit that does not require too much force but…

Downloads
86
Likes
15
Rating
5
P
PrintablesTisza

Stubby stylus for boogie board

If you lose the original stylus and the backup just print yourself a new one. Small but comfortable. ℹ : fits model - WT16312B holder sleeve and stand hole (see images below). Still draws on other models. Tip: print vertically with…

Downloads
49
Likes
6
Rating
0
P
PrintablesMad Dawg

Yeti VB Stubby

adjusted to fit VB Stubby

Downloads
10
Likes
1
Rating
0
P
PrintablesOlleMark

Stubby Allen key handles

Updates: 12-11-2023 - Added size 5,6,8 and 10. 12-11-2023 - Added Imperial sizes from 0.05in up to 9/64 in 13-11-2023 - removed 10mm because it was too weak. Because of multiple requests i have now made a stubby version of the allen key…

Downloads
1,997
Likes
570
Rating
4.93
P
PrintablesRyanR

Ionic Column Pillar Display Stand Short Stubby Remix

I remixed the original model merely be shortening the middle of the column. The top and bottom remained proportional and in their original shapes. The result is a short, stubby column that I printed for use as a display stand. I printed…

Downloads
1,949
Likes
331
Rating
4.88
P
PrintablesMKS

LTT Stubby Screwdriver

This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…

Downloads
1,694
Likes
728
Rating
4.68
P
PrintablesRoland

Stubby - Bit Tool

Description: This bit tool is so compact that it can be used in the tightest corners. There’s never too little space for working with it. It is designed for a hex bit with a width of 6.3 mm (approximately 0.24 inches). According to…

Downloads
1,409
Likes
370
Rating
4.94

Mlok vertical grip/stubby grip

Vertical grip that mounts to mlok rails. Stubby version included. Feel free to comment or message me if you need any help!

Downloads
1,238
Likes
114
Rating
5
P
PrintablesEx-Pigeons

Stubby Worker style angled forgrip

Stubby grip based on the worker angled grip. use 30mm M4 bolt and two nuts. should work with any picatinny rail.

Downloads
1,031
Likes
95
Rating
5
P
PrintablesDev6

Makita DUB184 Stubby Nozzle

Wanted a Stubby Nozzle for my Makita Blower. Found some on Etsy but with Shipping, Taxes and the Price... Its by far not Perfect…

Downloads
911
Likes
47
Rating
5
P
PrintablesAABiglerDesign

Stubby Spool Holder - Ender 3 V3 SE KE

Ender 3 V3 SE/KE Stubby Spool Holder The top mounted spool on the Ender 3 V3 SE/KE can create a lot of ringing and general instability. Most people don't use the full Z-range of their machine, and this spool mount takes advantage of that…

Downloads
776
Likes
112
Rating
4.67
P
Printablesh00fty

M18 Battery Holder (Stubby)

None of the battery holders available met my needs so I designed one for myself. The screw holes accept a #10 self tapping hex head and do not interfere with the battery slotting into the holder. No supports needed. I also shrank the…

Downloads
737
Likes
80
Rating
5
P
PrintablesBrandon Raineri

EGO Leaf Blower Stubby Nozzle 70mm - Vase Mode - 0.8mm Nozzle

This a a stubby nozzle with a 70mm opening for EGO branded leaf blowers. This was specifically designed for the LB7650 blower but may fit other models as well (confirmed the fit works on a LB5300 as well). The design incorporates crush…

Downloads
685
Likes
77
Rating
4.67
P
PrintablesKurtis

DeWalt DCBL722 Stubby Nozzle

I needed a shorter nozzle for drying my car after washes and there was nothing already available. I am no CAD pro and used tinkercad for this, so the resolution isn't amazing, however it seals perfectly fine and works great for me. I…

Downloads
673
Likes
84
Rating
5
P
PrintablesMelSK

LTT Standard and Stubby Screwdriver Duo Case. 17/7/24 Updated

Created a new case to house both the stubby and the standard LTT Screwdriver together with up to 36 extra bits. I might make a bit holder magnet version like my other case down the line but it would end up way too bulky for me to put in…

Downloads
644
Likes
162
Rating
5
P
PrintablesTom Whitwell

Stubby PG7 Cable Gland Mount

Remix of Alexander Þór's M12 Gland mount , with a PG7 thread rather than M12 (allowing a smaller strain relief gland to be used). Also adds a slot to slide the cables in through. This can be secured with an 8mm M3 SHCS screw and heatset…

Downloads
571
Likes
51
Rating
5
P
PrintablesOnino

NieR Automata: Short Stubby Machine Lifeform

I really wanted to find a high quality poseable Short Stubby model from NieR: Automata, and when I couldn't find anything that really ticked all the boxes, I decided to make one myself. This kit will require some post processing and a…

Downloads
563
Likes
131
Rating
4.83
P
PrintablesJAYSODUDE

STUBBY SPANNER - 3D Printable Adjustable Wrench

This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his wrench and didn't want to wait for the entire thing to print each time (all the important stuff is in the…

Downloads
540
Likes
39
Rating
4.89
P
Printablestxguy944

M18 stubby 43pc milwaukee insert

Milwaukee packout insert to hold 43pc socket set as well as m18 stubby 3/8 impact with 5.0 battery. Sockets are a tight fit to hold them in place in transport. left a spot for you to add your own text

Downloads
529
Likes
92
Rating
0
P
PrintablesFC2Alejandro

DeWalt Stubby Nozzle for DCBL722

Stubby Nozzle for DeWalt DCBL722 Cordless Leaf Blower Snaps in with ease and is great for drying cars/grilles! Has held up with moderate use Designed in Fusion 360 model file availiable for remix etc. Printed on Ender 3 S1 with Hatchbox…

Downloads
511
Likes
69
Rating
5
P
PrintablesFABRK8N

Milwaukee M18 Blower Stubby Nozzle

This nozzle fits the Milwaukee M18 (2 battery) (2824-20) blower.

Downloads
511
Likes
63
Rating
5

AR Pistol Grip 5 Deg Cant Stubby

Remix of my own file. Made it smaller. Scale by 2450% for you metric folk. Category: Sport & Outdoors

Downloads
471
Likes
50
Rating
5

Craftsman Stubby Wrench Organizer

Quick simple wrench organizer for the tiny Craftsman stubby sets. Same part works for both standard and metric.

Downloads
420
Likes
89
Rating
5
P
Printablesadamh_glass

Milwaukee M18 Fuel Stubby Nozzle (#2724-20)

Recommended printing: PETG, 3 walls, 15% gyroid infill

Downloads
411
Likes
27
Rating
5
P
Printablesnpopson

Milwaukee M18 EXTRA Stubby Nozzle (FUEL Blower 3017-20) Works with Attachments!

I adjusted the original model to make it as stubby as possible. I also removed all unsupported overhangs around the latch area. I also made the latch easier to press by making it larger. I also made the tip the same diameter as the…

Downloads
400
Likes
52
Rating
0
P
PrintablesUncleFrankSays

UFS-035 Mini Screwdriver 1/4" Hex Bit - Driver & Stubby, No Magnets

The original mini hex bit driver was both good, and bad. https://www.thingiverse.com/thing:4040548 The good part was the ridges were nicely designed, and gave the handle a lot of grip. It was also a fun idea to have the stubby pop out of…

Downloads
381
Likes
73
Rating
4.5
P
PrintablesBasementLAB

Stubby Handle for Hex 1/4 Bit Driver Screwdriver - Mini manico porta inserti esagonali

Stubby Handle for Hex 1/4 Bit Driver Screwdriver - Mini manico porta inserti esagonali Available for: 10 - 25mm bit 15/10/2025 Update. Added REV1 versions Bottom Chamfer: Added to enhance print bed surface quality. Bit Socket Tolerance:…

Downloads
376
Likes
66
Rating
5
P
Printablesbenry

Stubby Vertical Grip - Picatinny

stubby grip that uses m3 hardware. the picatinny mount and the grip are sepperate parts so if you break the mount you dont have to reprint the whole grip, as is the case with other 3d printed grips I have used.

Downloads
352
Likes
54
Rating
5
P
PrintablesKekspolizei

DIY Stubby Screwdriver

A simple Stubby Screwdriver with a length of 60mm (without bit extension). The only thing you need is a simple bit extension, as shown in the picture (10mm outer diameter).

Downloads
348
Likes
100
Rating
5
P
PrintablesGarfy

Mouldline scraper handle for GW stubby metal mouldline remover.

Print this handle for your Games Workshop metal mold line remover tool to make it actually usable. No supports needed. An M3 nut and M3x10 can be used to secure the metal piece to the 3D printed handle. Stl file includes discs either end…

Downloads
338
Likes
15
Rating
5
P
PrintablesJon

A1 Nozzle Brush Taller Stubby Inset

A remix to shorten the brush arm and have an inset for the A1 brush pad. The shortened brush arm gives better clearance for build plates that have alignment corner pieces. The inset gives stability to the brush when cleaning the nozzle.…

Downloads
314
Likes
27
Rating
5
P
Printablesjk_printer

Ergonomic stubby screwdriver handle for magnetic hex bit holders

A (more or less) ergonomic stubby screwdriver handle, designed to work with generic 6.35 mm (= ¼") magnetic hex bit holders of 50 mm overall length. The design incorporates anti-roll elements, as well as a top access hole to push out the…

Downloads
310
Likes
37
Rating
5
P
PrintablesPhants

Gridfinity 1x3 LTT Stubby Screwdriver

Designed to support a stowed LTT Stubby Screwdriver with or without a bit inserted in the shaft.

Downloads
307
Likes
33
Rating
4.9
P
PrintablesLuke's 3D

Two-way ratchet stubby screwdriver

Having a big success with my Ratchet toothpaste tube squeezer I though I'd dip my toes in something more complex. And what else should I tinker with if not with Ratchet screwdrivers. So I did. And it was a challenge, let me tell you.…

Downloads
292
Likes
137
Rating
4.75
P
PrintablesRyan Bailey

Best Stubby Short Hex Bit Driver

To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/143533#profileId-167268 I made this model as i was getting really frustrated with all the Hex bit holders i was printing off from other peoples…

Downloads
267
Likes
35
Rating
5
P
PrintablesRoute3d6

Stubby screwdriver

Not my design, Fusion has McMaster-Carr components that can be inserted. I found this stubby screwdriver there. I removed the shaft and extruded a hex with relieved corners. It is a tight press fit, insert an adapter of your choosing or…

Downloads
264
Likes
38
Rating
4.88
P
PrintablesMarcElbichon

Stubby Car Drying Nozzle for EGO Leaf Blowers and Wall Mount

Remix from https://www.thingiverse.com/thing:4841242 Wall mount for the nozzle scaled at 101.5% (the orginal design is too small) Category: Tool Holders & Boxes

Downloads
253
Likes
32
Rating
5
P
Printablescbrick

Better 3dprinted LTT Stubby ratcheting Screwdriver

This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…

Downloads
249
Likes
79
Rating
5
P
PrintablesOurAngryBadger

810 Drip Tip Stubby

A short, stubby 810 drip tip. Comes in two variants, a regular one and one with a "mesh screen" in the bottom to filter out ejuice “spit”. Fits well on my Geek Vape Z tank. You may have to scale it up or down 1% to get a perfect fit. I…

Downloads
246
Likes
12
Rating
0
P
Printables3DeezNutz

Gridfinity 10 Stubby wrenches

A remixed of 1x4 grid for stubby wrenches. a remixed of DesignTheEverything design please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…

Downloads
244
Likes
37
Rating
0

AR Pistol Grip 5 Deg Cant Stubby & Chubby

Remix of my original model. Wanted something smaller, more palm-filling. That's what she said. Category: Sport & Outdoors

Downloads
221
Likes
33
Rating
0
P
PrintablesLink

Teeny Tiny Stubby Screwdriver Handle

Size isn't perfect I had to heat up my bit with a lighter so it might take a few shots if you want it hot-swapable with other bits, basically I scaled down the old screwdriver handle to accomodate 4mm bits, when I did a numerical…

Downloads
213
Likes
14
Rating
5
P
PrintablesRyan Bailey

Stubby Hex Bit Driver with Bit Storage

To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170238#profileId-186889 Follow up and improvement on my prior Stubby Hex Bit Driver with additional features…

Downloads
208
Likes
53
Rating
4.67
P
PrintablesMarkuzzzi

Gridfinity Holder for Wera Stubby Bitholding screwdriver (811/1)

This gridfinity bin is designed to hold a Wera Stubby Bitholding screwdriver with article no. 811/1. The bin should hold any other bitholding screwdriver as long as the center bitholding piece has a max. diameter of 10.5mm and is max.…

Downloads
207
Likes
44
Rating
5
P
PrintablesSE3Dtech

EGO 580 CFM Leaf Blower Stubby Attachment

Stubby attachment for for EGO LB5800 (580 CFM) Leaf Blower. Includes crush ribs on the interior for a more flexible fit and a twist lock mechanism. Useful for blowing off car, gutters, etc. Depending on your printer's settings and…

Downloads
205
Likes
40
Rating
5
P
PrintablesMY

Stubby & Flat Nozzle for Craftsman CMCBL700 Leaf Blower

Prints vertically on the exhaust side without supports.

Downloads
202
Likes
29
Rating
5
P
PrintablesJay 12913

Short & Stubby Hex suppressor

Short, stubby and hexy suppressor. Bit of a play around in Fusion, someone might want it :) 14mm ccw thread. Print without supports at whatever settings you fancy, rafts not required.

Downloads
201
Likes
23
Rating
5
P
PrintablesTrase

LTT Stubby Screwdriver with ratchet

Mix of two models to add ratcheting mechanism from @Martin Rigatoni to LTT Stubby Screwdriver from @CheffHD. You will need two rachets, everything else is by one piece. Be careful with supports in handle - there is a tiny guide slots on…

Downloads
201
Likes
31
Rating
5
P
Printablesmorotsgurka

CAMLOCK Makita Router Attachment - Stubby 37mm

The “Stubby”, the shortest connector for @PeterH CAMLOCK System i could make. You could probably cut it a few mm shorter by removing the flange at the top if you want. Made to fit the dust port of a Makita DRT50Z trim router. Should fit…

Downloads
199
Likes
35
Rating
4
P
PrintablesTom Horsley

Stubby ice scoop

Picking up ice cubes with my hand leads to me dropping them all over the place, but all the ice scoops I looked at were to big to conveniently dig into the ice bin in my new refrigerator. I designed this one to fit in the bin by making…

Downloads
197
Likes
12
Rating
5
P
Printablesjattie

Stubby hex bit holders

Shallow hole - 8mm deep Deep hole - 20mm deep Magnetic Bit Holder - 42mm deep

Downloads
195
Likes
44
Rating
5
P
PrintablesEchoTiger006

LTT - Screwdriver Orignal and Stubby Case

This screwdriver case can hold a staggering 72 LTT "shorty" bits. The key eye amount you saw the title, the title is not clickbait. You can fit both the original and the "Stubby" screwdriver in one case. All color variants of the "Stubby"…

Downloads
194
Likes
29
Rating
0
P
PrintablesDubious Bovine

Gridfinity stubby spanner holder

Was after a small footprint Gridfinity organiser for my stubby spanner set from Super Cheap Auto. The holder itself fits in a 2x1 grid space, printed in just over 30 minutes on my P1S. Have included a step file for making any tweaks.…

Downloads
192
Likes
22
Rating
5
P
PrintablesRasmus Additive

Stubby Hex Bit Driver

Small and compact 1/4 inch (6,35mm) stubby hex-bit driver

Downloads
183
Likes
32
Rating
5
P
PrintablesErer2001

NOT LTT Stubby Screwdriver - Fancy

GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/595624 In this alternative version the stubby body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…

Downloads
179
Likes
50
Rating
4.75
P
PrintablesShadow

LTT Stubby Screwdriver with modified bit holder and ratcheting option

General After some experiments with all this 3 projects I came out with one remix to join best of them all in one. This remix includes new type of a bit holder and body to build a ratchet version as well as a regular one. None of work is…

Downloads
174
Likes
26
Rating
5
P
Printablesmeb97me

Dewalt DCM562 18V Leaf Blower Stubby Nozzle

A stubby/wide nozzle for a Dewalt DCM562 leaf blower, designed to help shed water off my car post washing. Print in vertical orientation I did have a few issues with model warping/lifting off bed so had to add a brim and slow speed down a…

Downloads
167
Likes
11
Rating
5
P
Printablesgyrex

Ozito Jet Blower Stubby Nozzle

I designed this stubby nozzle for my Ozito blower so I could use it to blow the water off my car after washing it. It's for the dual battery Ozito Jet Blower:…

Downloads
166
Likes
6
Rating
3
P
PrintablesCV8mate

M12 3/8" Stubby Impact Holder (Model #2554-20)

This is a modified version of Model #2554-20 M12 3/8" Stubby Impact originally designed by tonsoffun2325X model. This model is pretty easy to print, so long as you enable supports for the overhanging mounting plate. I used PLA with 35%…

Downloads
153
Likes
28
Rating
5
P
Printables3DeezNutz

Gridfinity 16 Stubby wrenches

A remixed of 1x6 grid for 16 stubby wrenches. Fits metric and in set. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…

Downloads
150
Likes
26
Rating
0
P
Printablesyandre

Gridfinity (1x2) 7 slots stubby wrenches

Gridfinity (1x2) 7 slots stubby wrenches

Downloads
148
Likes
13
Rating
5
P
PrintablesCash
Downloads
147
Likes
26
Rating
0
P
PrintablesRocksAudio

Snap-on style Stubby Screwdriver Bit holder Handle

This is a snap-on style stubbier stubby screwdriver handle. It's shorter than the snap on stubby, and they don't make one like this. I use it for tighter spaces when a normal stubby screwdriver won't fit. I downloaded that file to Blender…

Downloads
140
Likes
37
Rating
5
P
Printablesthe freewheeler

Stubby Remix of Mini / i3 LCD Knurled Knob

Other knurled knobs I've seen for the Prusa Mini have all been either too wide or too tall, so a remix was due. It's not too big, not too small. This one's just right. Dimensions measure 22mm wide x 11mm tall STEP, F3D & STL files provided

Downloads
137
Likes
17
Rating
5
P
PrintablesSaniainen

Stubby M-lok handguard

This is meant to short and sturdy handguard, safe to use vertical foregrips. Design inspired by m23 prototypes. Half mlok slots are good for most of attachments, but not all. Rule of thumb is, if an attachment can move half step on m-lok…

Downloads
136
Likes
27
Rating
5
P
PrintablesiListen2Sound

2.5 inch to 3.5 inch SSD Adapter - Stubby

M3 heated inserts can be placed on any of the 3.5 inch-equivalent screw holes.

Downloads
132
Likes
9
Rating
0
P
PrintablesErer2001

NOT LTT Stubby Screwdriver - Simple

GENERAL INFO I separated into 2 version: FANCY → https://www.printables.com/model/595619 Custom color accent ring and spinning end cap SIMPLE (This) In this alternative version the screwdriver body is a single color (You can still do…

Downloads
131
Likes
32
Rating
5
P
PrintablesRacoon Dev

Stubby M-LOK (Almost) Vertical Fore Grip

Simple, stubby, cut to length if needed. Requires x2 m5x8mm screws and x2 M5 MLok t-nuts. Minimal organic support needed to support inner geometry. Print solid. Fuzzy skin is nice.

Downloads
129
Likes
16
Rating
0
P
PrintablesVinors3DLab

Stubby Hex Bit Driver 1/4 inch – S / M / L

This is a complete set of 3D‑printed Stubby Hex Bit Drivers, designed for makers who want a compact, ergonomic, and reliable tool for everyday use. Each driver features a standard 1/4'' hex socket, making it compatible with all common hex…

Downloads
128
Likes
39
Rating
0
P
PrintablesMB_iki

LTT Stubby Screwdriver (with different bit storage)

Printed in PLA 0.3mm layer height, 60% triangles infill. The bit extender is press fitted with a clamp. The ring is just a small rubber band.

Downloads
126
Likes
27
Rating
4
P
PrintablesIndrek Pajuste

HSW Wall Hanger with stubby end

Prints well with: 0.2mm layer height 100%infill

Downloads
126
Likes
59
Rating
5
P
PrintablesJulius

LTT Stubby Screwdriver + Bitholder for 24 bits and the extension shaft (now Gridfinity compatible)

As I searched around and could not find something already existing which fits my needs, I created that holder for the LTT Stubby Screwdriver – Linus Tech Tips Store (lttstore.com) and some additional bits, because I was also tired of…

Downloads
124
Likes
19
Rating
5
P
PrintablesPatternMaker

Ego Stubby Nozzle with Latch (Vase Mode)

I tried printing the other version on here which is friction fit and had crush ribs. It worked for a bout a total of 3 seconds in turbo mode before it flew off. These blowers really put some power down especially the 765 model that I…

Downloads
122
Likes
20
Rating
0
P
Printablesblecheimer

Stubby Magnetic Bit Driver Handle

Maybe you have already seen my Magnetic Bit Driver Handle . Now here is an alternative version: The Stubby Magnetic Bit Driver Handle Features: Can be used with every 1/4'' (6.35mm) standard bit Bits are hold in place by a Ø4x2mm magnet…

Downloads
119
Likes
25
Rating
4
P
PrintablesA. Gonz.

Gridfinity Klein Tools Stubby 32308 Screwdriver Holder

A gridfinity bin for the Klein Tool Stubby screwdriver. 3x1x4 gridfinity bin

Downloads
113
Likes
27
Rating
5
P
Printablesknmorgan

Gridfinity Bin for Wera Stubby Ratcheting Screwdriver

This is a 2x1x3 Gridfinity bin for the Wera ratcheting stubby screwdriver.

Downloads
110
Likes
17
Rating
5
P
PrintablesSparcEE

TPU Nozzle Bumper for Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

Designed a TPU bumper for www.printables.com/model/906364-milwaukee-m18-stubby-nozzle-fuel-blower-model-3017 stubby nozzle. Printed in TPU with 100% fill and no supports bottom down. This is for the Milwaukee 3017-20 blower (2024). The…

Downloads
109
Likes
16
Rating
5
P
PrintablesCavin Rauch

AMS Stubby All in one Disconnect - Remix

Combined the Magnet and Hook version into one and made it smaller.

Downloads
109
Likes
10
Rating
1
P
PrintablesToolsToMars

Stubby Wrench Holder

For an 11 Piece Stubby Wrench set. Remix of https://www.thingiverse.com/thing:2839603 Updated thanks to some feedback i got from @Littlefieldpc. One of the end peices was not square down on the buildplate causing printing support issues.…

Downloads
106
Likes
15
Rating
5
P
PrintablesCarlos Morales

Cable gland mount - Stubby

Mixed together the Stubby PG7 Cable Gland Mount by Tom Whitwell and Voron stealthburner umbilicus and chamber sensor mount by IconoclastXYZ .

Downloads
104
Likes
13
Rating
0
P

Stubby Screwdriver

Small handheld screwdriver. Fits standard screwdriver bit. Quick print

Downloads
104
Likes
10
Rating
0
P
Printablesjeanmarc

stubby spanner rack

a compact stubby spanner rack, designed for tool box or wall mounted deployment , it has room for 4 10mm x 3mm magnets to keep it anchored in the tool box, or 2 screw holes for wall mounted. It will hold 10mm, 11mm, 12mm, 13mm, 14mm,…

Downloads
103
Likes
15
Rating
0
P
PrintablesRAC552

Kobalt Stubby Wrench Holder

Built this in Fusion 360. Created slot in the bottom to add a magnet (10mm*100mm) .

Downloads
102
Likes
27
Rating
0
P
PrintablesscaryPug

Lelit Elizabeth Stubby Steam Knob Cover

This is my 2nd design of Lelit Elizabeth steam knob cover. Check my 1st design here . I feel this type of design is more comfortable to grab and turn compare to my 1st model. The cover is inserted from the back of the original knob and…

Downloads
102
Likes
16
Rating
5

Milwaukee Gen 2 M12 Stubby Impact Wrench Scan

I F**KED UP THE SCALE. MULTIPLY SCALE BY 10. A laser scan of my M12 Stubby Impact.

Downloads
101
Likes
12
Rating
0
P
PrintablesLucas319315

DeWalt Stubby Nozzle for DCBL722 - Remix

Remix of DeWalt Stubby Nozzle for DCBL722

Downloads
99
Likes
6
Rating
5
P
PrintablesSparq

Greenworks Leaf Blower Stubby Nozzle Soft Tip

This soft tip should be printed in TPU and will fit snuggly over the excellent short spout model provided by @gpace08 here . Use-case for this is for when you're using this shorter spout to dry off vehicles - the TPU soft tip adds a small…

Downloads
99
Likes
11
Rating
5
P
PrintablesKyl3r_Designs

Pressure Washer Stubby handle nozzle attachment

3 nozzle fitment. 1" inner with for stubby swivel handle from Harbor Freight. Part in pictures is made from PLA. Can be printed in PETG or ABS. 15% infill. Nozzles have a tight fit and under testing have not fallen out. If the front guard…

Downloads
98
Likes
26
Rating
0
P

Stubby Round Ice Scraper

This stubby round ice scraper should be about 25-50% faster to print vs comparable scrapers with the same performance. If not better performance thanks to its sharp edge and ergonomic design. Print Settings Rafts: No Supports: No…

Downloads
95
Likes
6
Rating
0
P
PrintablesDarwinian

Beer Stubby Holder (Vase Mode)

A stylish beer stubby holder for printing in vase mode (single wall without a seam) that keeps your beer cold and prevents a lot of condensation forming on the bottle in humid environments (perfect for the tropics). It's sized for a…

Downloads
95
Likes
16
Rating
5
P
PrintablesNetpackrat

Foregrips for Picatinny Rail (Stubby)

I recently printed a few of the excellent Lynx nerf dart blasters by Orion Blasters. These are a pump action spring-air blaster, with a 1913 style rail on the pump handle, to which the user should attach the foregrip of their choice. I…

Downloads
95
Likes
25
Rating
0
P
Printableskerngebiet

Wera Stubby Wall Holder

Simple and small wall-mountable holder for Wera Stubby * Screwdrivers. Prints easily without any supports. * = Amazon Affiliate Links

Downloads
93
Likes
16
Rating
5
P
PrintablesCmarlow

Wera stubby holder

Wera stubby holder for the stubby set 1

Downloads
92
Likes
9
Rating
0
P
PrintablesWDonders

Stubby screwdriver bit holder

Sometimes even a stubby screwdriver just isn't short enough :-( That's why i made this ultra short one with room to store an extra of 6 bits. It's 25 mm tall and has a diameter of 40 mm. When the bits are stored in the handle, noting…

Downloads
91
Likes
5
Rating
0