Search results: submarine

Sort order

237 models

P
PrintablesJallim

Rubberband Submarine - Print in place

Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…

Downloads
10,240
Likes
3,912
Rating
3.91
P
PrintablesMP001

Sunken Submarine for Aquarium

Sunken submarine model for an aquarium. I made it so little fish can get in (around 45-50mm in diameter) and it's a favourite hiding spot them. You need to put a little weight into the submarine so it sinks (a smal rock will do or if you…

Downloads
2,550
Likes
388
Rating
4.88
P
PrintablesKitcard Studio

Submarine Type 7 - Kit Card

An easy to print and fast to assemble Type7 Sumbarine Kit Card. Print it with a low layer height for better results.

Downloads
2,302
Likes
460
Rating
4.5
P
PrintablesKitcard Studio

Submarine Typhoon Class - Kit Card

An easy to print and easy to assemble Typhoon class supmarine Kit Card. Use it to decorate your room and to express your engineering hobby!

Downloads
2,039
Likes
462
Rating
3
P
PrintablesRepoholy

Print in Place Submarine

Print your own yellow submarine! For your fish tank or kids… or both :) This is a remix of really great model Print in Place Helicopter from Triple G Workshop using the same print-in-place, support-less and propeller down concept.…

Downloads
1,597
Likes
365
Rating
5
P
PrintablesJoshua Keunecke

Subnautica Cyclops Submarine

This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several…

Downloads
1,451
Likes
353
Rating
4.67
P
PrintablesDreaded0ne

Sunken Submarine

I wanted a wrecked submarine for my aquarium with a bit more detail than was available here. So I took the original C3 submarine I-52 from HastuneR, and simplified it a bit, hollowed it out, added holes and all of that for fish to be able…

Downloads
1,242
Likes
403
Rating
4
P
Printableslamer house

submarine

submarine Category: Vehicles

Downloads
1,195
Likes
53
Rating
5
P
PrintablesModel_Citerzen

Virginia Class Submarine

------------------------------------------------------------------------ From Original Description ------------------------------------------------------------------------ This model is RC capable and it is 1 meter long. You can freely…

Downloads
1,158
Likes
76
Rating
5
P
PrintablesSamDe

Titan Submarine

I was feeling a little bored today and suddenly I thought, “Let's make the Titan!”. This is a simplified version ready to print and assembe using a little bit of glue. My condolences to the family and friends of the people involved in…

Downloads
1,100
Likes
361
Rating
4.92
P
PrintablesMith

USS North Dakota Submarine (SSN-784)

Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…

Downloads
931
Likes
72
Rating
5
P
PrintablesDape

Submarine toy

We all live in a yellow submarine! More files here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters

Downloads
918
Likes
124
Rating
5
P
Printablestechteacher007

Sunken Submarine NO SUPPORT REMIX | Aquarium Fish Tank Decoration

Model can be printed without supports, and scaled to any designed size. Photos of the model have been scaled. The model in the aquarium has increased Z height The model on build plate was printed at 50% (this was too small for my liking,…

Downloads
905
Likes
108
Rating
0
P
PrintablesRichard Irish

Los Angeles class attack submarine (SSN)

Model of a Los Angeles class fast attack submarine

Downloads
842
Likes
61
Rating
0
P
PrintablesStuffMaker2

Rubber band Submarine - Improved Strength

Changed the parts holding the rubber band so they print in the stronger orientation.

Downloads
792
Likes
152
Rating
4.5
P
Printablessthone

Novelty Submarine Fishing Lure

"Enemy Fish in the Water ... Release Countermeasures!" This is recreation of a Novelty Submarine Fishing Lure I came up with about 20 years ago. This is still currently in the testing phase so I'm marking this one as "A work in progress"…

Downloads
752
Likes
160
Rating
0
P
PrintablesMartin

Pirate Submarine - Verne, Zeman

Pirate submarine from the movie Vynález Zkázy by Karel Zeman based on the famous book by Jules Verne. The ship is kit, and fits together without any glue. xxx_-_ponorka_6 is here two as a printed part, but I myself will instead use a…

Downloads
747
Likes
186
Rating
5
P
PrintablesModel_Citerzen

Collins Class Submarine v2

Description The Collins -class submarines are Australian-built diesel-electric submarines operated by the Royal Australian Navy (RAN). The Collins class takes its name from Australian Vice Admiral John Augustine Collins ; each of the six…

Downloads
673
Likes
31
Rating
5
P
PrintablesModel_Citerzen

Astute Class Nuclear Submarine

Import of the Astute Class Submarine by Hobbyman. https://www.thingiverse.com/thing:4973343 ____________________________________________________________________ The Astute class is the latest class of nuclear-powered fleet submarines…

Downloads
672
Likes
24
Rating
5
P
PrintablesYurobuild

Cruiser Submarine Surcouf

I present to you a free, printable model of French Navy Cruiser Submarine Surcouf from the game Mir Korabli. Model is at 1:625 scale (about 17cm long) and are remodeled from the ground up with the goal of maintaining details while also…

Downloads
670
Likes
79
Rating
5
P
PrintablesJWatty

Submarine Class-LA, Click together.

Original needed supports all over. Cut into 4 individual parts that click together and the big parts can be printed with no support. Tail and tower will need structure. Easy to cut off though. Printing Tip: Print the front and back Hulls…

Downloads
657
Likes
62
Rating
0
P
PrintablesJan3ku

US NAVY Submarine

Realistic replica of iconic submarine, biggest nuclear submarine of cold war - Skipjack class. realistic look - OPTIMIZED FOR 3D PRINTING - length 40cm divided into parts for easy printing on classic size printers stand included Needed: -…

Downloads
637
Likes
91
Rating
4.67
P
PrintablesBoater Man

Submarine

Cool item you can put in a fish tank or any where in your house.

Downloads
628
Likes
46
Rating
5
P
PrintablesXJoza

Cyclops submarine from Subnautica

In English: Model Cyclops from Subnautica. There are three types of models of Cyclops itself. 1. Cyclops_with_cockpit is a Cyclops with the original cockpit. 2. Cyslops_whitout_cocpit is a Cyclops with the cockpit removed for ease of…

Downloads
624
Likes
34
Rating
0
P
PrintablesPeter Farell

Beatles Yellow Submarine Bath Toy

Beatles Yellow Submarine Bath Toy. Has hole in top and bottom with cavity in center.

Downloads
595
Likes
152
Rating
0
P
PrintablesEon3D

Subby – The Cutest Submarine Beneath the Waves

Say hi to Subby, the cheerful little submarine built for deep-sea fun and desktop charm! With its round shape, chubby fins, and curly periscope, Subby brings bubbly energy wherever it goes. Whether you're into ocean vibes or just love…

Downloads
568
Likes
43
Rating
4.25
P
PrintablesMartin

HMS Sword Submarine (Jules Verne, Karel Zeman)

This is my first version of the small submarine HMS Sword from the movie Vynález zkázy (Deadly Invention) by briliant Karel Zeman. This version comes with a stand and has posable flippers. The original attemt was to make it fully…

Downloads
567
Likes
158
Rating
4.5
P
Printablesfuchsr

The Crew: Mission Deep Sea Organizer/Insert plus submarine and token cases

An insert in the same style as my organizer for The Crew: The Quest for Planet Nine . Update 1-12-2023 : New version of submarine. Now prints as one piece, no supports needed! Features include: Holds sleeved or unsleeved cards. Token…

Downloads
527
Likes
70
Rating
4.86
P
PrintablesWind_Redrock

Los Angeles Class US Navy Attack Submarine

Los Angeles Class US Navy Attack Submarine

Downloads
516
Likes
44
Rating
0
P
PrintablesFoldedSkeleton

Typhoon-Class Submarine (Red October)

I uploaded a Typhoon-class submarine on this site almost two years ago, and though the model took me a long time to create, I was not satisfied with it due to its simplicity. However, I now have more 3D modeling experience, and since the…

Downloads
511
Likes
120
Rating
5
P

Sunken submarine

Use fish friendly filament

Downloads
482
Likes
120
Rating
5
P
PrintablesQuido Wagner

Rubberband Submarine - separate parts

Rubberband Submarine - separate parts, two part propeller, no tolerance test needed.

Downloads
480
Likes
46
Rating
4.75
P
PrintablesSolidG

Yellow Submarine + stand

This is a detailed 3D model of a yellow submarine, featuring moveable propellers and a custom stand. Perfect for display or animation projects, it brings a playful and nostalgic design to life.

Downloads
451
Likes
38
Rating
5
P
PrintablesMatyas Moravec

subnautica ATLAS submarine

biggest submarine from subnautica

Downloads
443
Likes
32
Rating
0
P
PrintablesLa Vida en 3D

3D submarine test bench

3D Submarine test bench designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for free, make and share. instagram creator: https://www.instagram.com/_lavidaen3d/ 3D Submarine test bench…

Downloads
406
Likes
29
Rating
4
P
PrintablesCaithy

Hammond from Overwatch - Submarine Skin STL (Wrecking Ball)

Here is a print ready Hammond (Wrecking Ball) from Overwatch, in his Submarine Skin • Tested on a Phrozen 8k mini, using 4k resin print (Image attached for which paints were used to achieve my coloring) • Lots of custom detail added, to…

Downloads
402
Likes
78
Rating
0
P
PrintablesCrafter64

Floating Submarine

Made on my ender 3. The wall thickness and infill is critical to make this model (D) float correctly at the water line. I used a 0.4 mm nozzle, 0.2mm layer height, 1.5mm walls, and 15% infill. Tree supports work well. A solid version of…

Downloads
394
Likes
46
Rating
4.67
P
PrintablesStrankler

Hour and Minute Hands Rolex Submariner style

These are clock-hands inspired by the Rolex Submariner, suitable for my Clock Face Rolex Submariner style . Hour hand: Length: 69mm, designed for a 5mm shaft. Minute hand: Length: 43mm designed for a 3mm shaft . The shaft diameter are (as…

Downloads
375
Likes
37
Rating
0
P
Printablesdaniel elbaz

rolex submariner clock dial

print whit 2 color change and enable iron on the topmost surpace only pla/petg

Downloads
367
Likes
25
Rating
0
P
Printablesyoyothechicken

The Alicorn Submarine (Ace Combat 7)

The Alicorn from Ace Combat 7, complete with a chess piece stand. This model has 2 variants, with and without the fins extending from the hull. I recommend printing the non-finned version on FDM printers, and the Finned version with SLA.…

Downloads
362
Likes
31
Rating
4.67
P
PrintablesIXI

Wind up Submarine

Very cool Sub with wind up motor and torpedoes ! inspired by the very popular wind-up boat. Adaptation of the wind up boat motor to a submarine , made a balast system for the sub to sink a little ! ( printing in progress I will post more…

Downloads
341
Likes
71
Rating
0
P
PrintablesStrankler

Rolex Submariner style Clock Outer Ring and Assembly

This is the outer ring for my Clock Face Rolex Submariner style . Assembled with the parts mentioned below and a Quartz Clock Movement Mechanism, you will have a wall-clock inspired by the Rolex Submariner as shown on the cover picture.…

Downloads
318
Likes
56
Rating
5
P
Printablesdb3jhf

Metric Water Tight Cylinder for Cyclops Model Submarine

This is a design for a metric watertight arcrylic cylinder (90/84 mm) which fits the Cyclops R/C Submarine https://www.thingiverse.com/thing:4560120 by Robert Cook. Modifications Additionaly to the two O-Rings on each cap it is possible…

Downloads
317
Likes
50
Rating
0
P

Benchy-submarine

Benchy-submarine. Modelled in Fusion360. Inspired by the original 3D Benchy. There are two versions of this. One with the whole Benchy, one only with the part which is over water. Category: 3D Printing Tests

Downloads
309
Likes
57
Rating
5
P
PrintablesTheo deGuzman

Ohio Class Submarine (NEW version available)

This submarine was modeled after an Ohio class sub and named after me! Print with organic supports everywhere. This sub can carry up to 12 Trident II D5 submarine-launched ballistic missiles (unlike the 20 missiles the real models use).…

Downloads
301
Likes
33
Rating
5
P
PrintablesPrusaLab

Submarine

Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .

Downloads
291
Likes
53
Rating
4.83
P
PrintablesStrankler

Clock Face Rolex Submariner style

This is a clock face inspired by the Rolex Submariner. Diameter of the face is 160mm. The hole is designed for 8mm shafts. I didn't add the Rolex crone or lettering to not violate copyrights, but with a little research in the WWW and a…

Downloads
287
Likes
36
Rating
5
P
PrintablesJakub M

Submarine class-LA

Třída Los Angeles je třída amerických rychlých útočných ponorek s jaderným pohonem z doby studené války.

Downloads
285
Likes
32
Rating
0
P
PrintablesJBarche

HMS R 10 (British WW 1 submarine)

This is a 1/100 model of HMS R 10. Other models are over on cults

Downloads
274
Likes
23
Rating
0
P
PrintablesBlack Jack

Yellow Submarine Sub

Supports to be provided as required Inspired From an image. Appreciate if you upload make.

Downloads
259
Likes
23
Rating
4
P
PrintablesAJtheking

bath tub submarine

A submarine perfect for the bath tub

Downloads
258
Likes
80
Rating
0
P
PrintablesDecorartor

Steampunk Sunken Submarine Aquarium Decoration

This steampunk-style submarine makes for a great addition to any fish tank or shelf display. It features plenty of small details like rows of rivets along the hull, three portholes on each side, and a classic periscope on top. There is…

Downloads
253
Likes
22
Rating
0
P
PrintablesMatthew Henry

Submarine

toy submarine

Downloads
244
Likes
18
Rating
5
P
PrintablesAndreaFinestra

Dyson Submarine

Pulsante sostituito Dyson per spazzola submarine. Da tagliare a metà, specchiare e stampare 1 DX e 1 SX. Incollare le due estremità e montare sulla spazzola con la molla originale.

Downloads
234
Likes
6
Rating
0
P
PrintablesTynernis

Fallout 4 - Chinese Submarine Yangtze

The Yangtze-31 (Chinese: 扬子-三十一;), is a Chinese nuclear-powered ballistic missile submarine commanded by Zao. When first discovered by the Sole Survivor in 2287, it is lodged in the shallow waters off the coast of the Commonwealth south…

Downloads
227
Likes
32
Rating
0
P
PrintablesBJ Jet

Submarine

Bath toy

Downloads
224
Likes
18
Rating
0
P
PrintablesZdendys

Remix Pirate Submarine - Verne, Zeman, Nautilus

Remix původního modelu, který lze snadněji tisknout. Nejlepší je umístění modelu jak je na obrázku. Tisk bez podpor, pouze pro lodní šroub(xxx_-_submarine_3.stl) byly potřeba.

Downloads
222
Likes
26
Rating
5
P
PrintablesAcomisp

Submarine Powered By Rubber Bands

This model of a submarine is built with simply four geometric shapes components in Tinkercad. A Square, Sphere, Paraboloid and Tube. Print this model to enjoy, or get inspired to create Snappy Science. Stretched rubber bands are loaded…

Downloads
215
Likes
32
Rating
0
P

Bathtub Toy Submarine

Use safe filament Fun submarine for ages 3+

Downloads
212
Likes
43
Rating
0
P
PrintablesWind_Redrock

Battleship Kit For Micro Armor Including Patrol Boat, Submarine, Battleship, Cruiser, Battleship

Battleships For Micro Armor Including Patrol Boat, Submarine, Battleship, Cruiser, Battleship

Downloads
210
Likes
16
Rating
0
P
PrintablesKSKN

Submarine Bath / Pool Toy

A toy submarine for bath or pool time. It floats (almost) at periscope depth. I guess it depends on what percentage you use for the infill. I used 10%. The propeller can just be pushed into place. Parameters i used: Infill: 10% Organic…

Downloads
209
Likes
36
Rating
5
P
PrintablesMask Pro
Downloads
198
Likes
24
Rating
0
P
PrintablesMrRogers

BATTLESHIP game U-Boat Submarine

A prank I designed for the BATTLESHIP board game, can be used as a replacement part if you like causing chaos at the dining room table. Printed on a ELEGOO Saturn 2 resin printer with 8k Grey ELEGOO resin, using Lychee slicer and UVTools.…

Downloads
195
Likes
57
Rating
0
P
PrintablesJP3D

Floating Submarine - articulated - multi part

Plenty of fun ahead with this cute submarine. You can move its gripper arms, its telescope and its propeller! For adjusting the floating properties there is space for two coins inside the submarine. You can print all the parts in…

Downloads
195
Likes
60
Rating
5
P
Printablesedl

Bolt Hook Upgrade for Rubberband Submarine by Jallim

The longer hook makes it easy to get the band(s) attached when the bolt is in place, and the shorter hook positions at about the same place as the original. Either hook should be less frustrating. These are a direct replacement for the…

Downloads
195
Likes
23
Rating
5
P
Printablesthewatsonator

OceanGate Titan Submarine

Remix, resized and painted in bambu studio.

Downloads
194
Likes
15
Rating
0
P
PrintablesAEJ 3D printing

Nuclear Submarine

Just a normal submarine.

Downloads
186
Likes
10
Rating
4
P
PrintablesMichal_Vallo

Old design of yellow submarine from The Beatles

Yellow submarine from animated film Yellow submarine including The Beatles But be aware this is old design made in 2019 and therefore is not my best work and NOT completely film acurate. print in stl orientation with supports

Downloads
178
Likes
35
Rating
0
P
PrintablesBgpiper

Remix of rubber band submarine body

This version helps solve some of the issues I was having with the original. it now rotates a little more freely and I increased the tolerance to make it more forgiving. This version requires a .4 nozzle and .2mm layer height or it might…

Downloads
173
Likes
15
Rating
4.33
P
PrintablesModel Magic

Thunderbirds are GO! - Thunderbird 4 Submarine - 1964-1965

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
164
Likes
31
Rating
5
P
PrintablesABM Masum

Titan Submarine

A simplified model of Titan Submarine. Optimized for 3D printing

Downloads
163
Likes
27
Rating
5
P
PrintablesThe Man

Submarine

It's a 110mm x 20mm x 32mm submarine body with the bottom cut off and a 8.4mm x 6.87mm x 11mm fin in the back. If you have a blue wall you can tape it on and voila an ocean.

Downloads
158
Likes
14
Rating
5
P
PrintablesUseless Designs

Random Submarine

It's not based off of any real submarine.

Downloads
153
Likes
20
Rating
0
P
PrintablesSenki_86

AQUARIUM - Submarine

Aquarium set Follow my profile for more models ( pirate ship, car wreck, diver, diver in octopus tentacles, submarine). Be patient when removing the supports ! Thank you for downloads, likes... Enjoy !

Downloads
152
Likes
26
Rating
0
P
PrintablespHiLViO

Submarine 1

Just another submarine

Downloads
150
Likes
11
Rating
5
P
PrintablesPec0us

German World War II submarine

Highly detailed 3D model of a German World War II submarine . Perfect as a collectible miniature, for tabletop wargaming, or as part of a naval diorama. The model is designed to print easily even in smaller scales, with minimal need for…

Downloads
147
Likes
18
Rating
0
P
PrintablesDaniel Ramirez

Virginia Class Submarine (Modular)

Modular Virginia Class Submarine

Downloads
144
Likes
16
Rating
4
P
PrintablesNoel Saradjuk

German Submarine

You can used it: - as a bathtub toy - as a model for your room - put it into your aquarium as decoration - print it with no infill (hollow), fill it up with water and create a floating submarine that hovers in you aquarium

Downloads
142
Likes
30
Rating
0
P
Printablesilove3dprining

submarine benchy

a submarine boat for display purpose only does not float but may sink.

Downloads
137
Likes
22
Rating
0
P
PrintablesChris B

Sub Culture Submarine

The main character's submarine from the 1997 video game Sub Culture. I included the 3mf file because the split is a bit tricky. Assemble with CA glue.

Downloads
135
Likes
11
Rating
4
P
PrintablesModel Magic

Stingray - Stingray Combat Submarine - 1945-1965

Stingray - Stingray Combat Submarine - 1945-1965 3D printable model.

Downloads
129
Likes
19
Rating
5
P
PrintablesJohnDoe

Flying Submarine

THIS IS A COMPLETELY EXPERIMENTAL MODEL This design is based on the V-22 osprey and its tilt rotors. I recommend you use two EDFs and two servos to replicate the tilt rotor. I used two 80mm EDFs and their recommended ESCs. I printed with…

Downloads
126
Likes
23
Rating
0
P
PrintablesJo T

Basic Submarine

I got bored and made this

Downloads
122
Likes
4
Rating
0
P
PrintablesJoshua Wolf

Submarine Cookie Cutter

A simple submarine cookie cutter. Roughly 3.5" long by 1.6" high. Recommend printing in ABS or PLA (or other food safe filament).

Downloads
121
Likes
17
Rating
0
P
PrintablesBazzar701

Tiny Nautilus Submarine - Mini Ships Series

Nautilus Submarine, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Ships collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…

Downloads
116
Likes
33
Rating
0
P
PrintablesKonrad Dalla

Dyson Submarine clip (paper clip)

Clip for Dyson submarine, with holes to be used with a short piece of paper clip. The original part was really fragile, so I've made it with holes instead of pins. A small piece of a paper clip is needed to fix it to the main body part.…

Downloads
114
Likes
4
Rating
5
P
PrintablesFranktion

Dyson V15 Submarine Roller Drying Stand

Stand with dish for drying the Dyson Submarine roller.

Downloads
111
Likes
20
Rating
5
P

3D. Submarine toy

Toy Submarine can be used in water ;)

Downloads
107
Likes
12
Rating
0
P
PrintablesShmuel Moses

Dolphin submarine - צוללת דולפין

The Dolphin class (Hebrew: הצוללות מסדרת דולפין) is a diesel-electric submarine developed in Israel Resolution: 0.2mm layer high, 0.4mm nozzle Infill: 100

Downloads
103
Likes
11
Rating
0

Scuttlefish Submarine

The Scuttlefish - a submersible steampunk vehicle designed for a crew of 2. I originally designed this for MakerBot and Bold Machines under the name Gowanus Monster for the Margo Series back in 2015. This is the updated version with open…

Downloads
102
Likes
27
Rating
0
P
Downloads
102
Likes
35
Rating
5
P
PrintablesDavid C

3 Tier Model Submarine Stand

This is a simple stand to display three 1/350 scale submarine models. I printed 2 and joined with three 150mm lengths of 10mm diameter aluminium tubing. The rounded profiles that the models sit upon match the kits I used, YMMV. For those…

Downloads
102
Likes
30
Rating
0
P
Printablessteamtronics

Print in Place - Submarines

Two different styled submarines with working propellers. Print in place propeller similar to my print in place airplanes. No support material needed. I was able to print on my Ender 3

Downloads
102
Likes
19
Rating
0
P
Printablesschmeiserd

Dyson V15s submarine drying rack

Drying rack for the wet roller brush bar of the Dyson V15s detect submarine

Downloads
101
Likes
19
Rating
0
P
PrintablesFindusdwarf

Yellow Benchy Submarine

I designed a small submarine based on the 3D-Benchy. I know there are already several, but the existing ones were too big, too long, too something for me. The hull is not round but oval. With this and 60% filling, it lies deep enough in…

Downloads
100
Likes
14
Rating
0
P
PrintablesPots

Mini Submarine with 3mm LED light

Mini Submarine Partly my own design, some parts remixed from other designs: https://www.thingiverse.com/thing:4621837 https://www.printables.com/en/model/325895-generic-landing-skid A 3mm LED can be inserted into a bracket in the interior…

Downloads
98
Likes
33
Rating
5
P
PrintablesExuZ

Dyson v15 Submarine holder

With this holder I can store my submarine unit on the wall along with the other nozzles. you need a left and a right, so mirror the one piece in your slicer when you want to print the second part.

Downloads
96
Likes
7
Rating
5
P
PrintablesFokieH

Benchy-Submarine

Hier findet Ihr ein Remix des beliebten Benchy Boot für Unterwasser Expeditionen. Gedruckt in PLA im Profil 0,2mmStructural ohne Stützmaterial. Viel Spaß beim Drucken! Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here…

Downloads
96
Likes
26
Rating
0