Taylor Swift
Taylor Swift.
Print approx. €21.72–€26.54 excl. taxPreliminary estimate for one variant
- Downloads
- 2,301
- Likes
- 165
- Rating
- 4.83
344 models
Taylor Swift.
Print approx. €21.72–€26.54 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio 1.- Print the lines in black color. 2.- Print the cardigan (white color) changing…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Use color change/pause at layer Nozzle: 0.4 Layer: 0.1-0.2 (Recommended) No Supports needed Scale it as you like :)
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
A Battery holder for Makita 18V the battery i placed in a 45 degree angle for easy and quick access. The battery can be mounted in all most any direction: Sideways, upwards, downwards, upside down or whatever you like. I have made a…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
By popular demand, not saying it was my daughter, I bring the bling. As usual, print with multicolor or manual color change just above the 1.8mm layer. Print bottom part in clear (works really well), black or white. Red suggested for the…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
I printed mine laying down but I've included the gcode for both laying down and upright versions.
Print approx. €6.09–€7.44 excl. taxPreliminary estimate for one variant
suzuki swift hatrack holder for 1996 1.0 suzuki swift car (can be good for other models.. print it in this orientation for additional sreght some draft and suport may be nececary for the ears. it is 15-30 min (100% infill) print i used…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Shifter ball bushing i recreated for my 1999 Chevy metro. Print 2 of them for top and bottom.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Dopo svariati tentativi sono arrivato alla conclusione del disegno di questo rocchetto customizzabile che risolve diversi problemi per chi cercava un modo semplice per gli avvolgimenti dei trasformatori con misure personalizzate.…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
My recreation of an old PC water cooling external radiator mount, Inspired by the Swiftech "Radbox" MCB-120 It's made of a two part construction, the holding plate and housing for ease of installation with multiple slots for vertical and…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
Hi all, Here is my radio controlled model of the Swift S1 aerobatic glider. Wingspan is 2m and length 1.1m. Here is a movie of it https://www.facebook.com/559746714/videos/1843541272661195/ My prototype fuselage is printed in ASA, the…
Overview : One of my favourite bird is common swift. The true kings of flying. It is the only species that spends most of its life in the air including eating, drinking, mating and even sleeping. They can spend up to 10 months in the air…
3D logo/signature of Taylor Swift , with a stand, so it can be easily placed on a shelf, table, etc. as a decoration Dimensions: ~ 200x65x11 mm (width x height x depth) - you can print any size you want I used this image to create the 3D…
Made this for a friend's Taylor-Swift-themed party. Easy print with no supports necessary. I scaled x and y up to max print volume, but set z to .75" in prusaslicer. .2mm layer black and gold filament with color change set at the start of…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
These are quick modeling practices without much consideration for printability. 3mf file should include the recommended print orientation for the aircraft, positioned such horizontal stabilizers and aircraft nose can be printed together…
Made this as a Christmas gift for my girlfriend who loves Taylor Swift. Two part kind of print, I just glued her legs to the platform when they were done. You will probably need to rotate the platform so the flat part is laying down on…
Nozzle: 0.4mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. A brim is recommended to make sure it doesn't lift Filaments Used: PLA Elegoo/Sunlu Black Transmission Distance: 0.6 PLA Elegoo Gray…
Modeled after the layout of the Eras Tour Stage. Customize text with secret songs and venue. I used a color change stop on my MK4 and 3 perimeters with a 10% infill printing in PLA. Can also change the center and bottom text to be joined…
Made this for my girlfriend to add a little decoration to her calendar. It is the title of the album, which the photoshoot for the calendar was done for, in a similar font as the original. The beginning swoop of the L is a little thin for…
Any feedback would be greatly appreciated. Nozzle 0.4mm Layer Height 0.12-0.24mm (Recommended) No supports needed Scale it as you like :)
I recreated the popular Estes “Swift” model rocket! Printed in PLA and attached with Testors plastic model cement. The total print time is only 1 hour! I recommend printing everything except the fins with a brim to help with bed adhesion…
Print in place / flexi-wing swift model that flaps its wings when you push the button. Model size is approx 180mm wingspan, 100mm length and 30mm tall. STL file contains the lower body with all the wing parts and flapping mechanism, upper…
Supports will be needed when printing the album name plates. No supports necessary for the shelf prints. Print with 0.20mm in either PETG and PLA. Album name plates are designed to be removed/replaced in case of accidental damaged during…
Did anyone expect this announcement? Certainly not me! As I clown once again from my Reputation (Taylor's Version) speculation, I wanted to recreate the bookmark that will be included with the Vinyl! It's not exactly the same, since I…
This yarn swift in its current iteration can accommodate 24" hanks, we're working on adapters for larger sizes. Supplies Tools, & Print List The entire project can be printed with a single 1kg roll of filament, and requires the following…
Should print in all filament
Recommended settings tested with Elegoo Neptune 4 Plus printer on PLA material and Orca Slicer: Hot bed first layer 65°C and following layers 60°C. Use 0,4 mm nozzle. Printing temperature 210°C. Infill patterns: Rectilinear. Top and…
Tortured Poets Department out April 19th <3
I created large beads representing all letters (A to Z), size 60mm sided square with a 10mm hole on it. In this case it will be used on a Taylor Swift concert as decoration. The letters have also a geometry so in theory you can either…
Simply pause and swap or use a MMU/AMS to change filament.
There is a universal plate that is meant to be screwed directly into the stud or you could use double sided tape if you trust it (I don't). The plates were printed using MMU2S and placed them face down to minimize the chance of quality…
Printed in FDM, 0.12mm with 0.25 nozzle. supports required, can be printed in one pice. Can be printed with 0.4 nozzle, but need more work to get a good surface for priming and painting Add glue to the boty and then put glitter.
1989 (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Midnights (by Taylor Swift) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Made this for a friend's Taylor Swift-themed party. Scaled up the model to max print volume for x and y, but kept z at about 0.75" to1" height. Easy color change from the guitar to signature.
Taylor Swift signature and silhouette display decoration, with an added guitar in the background. My daughter has become a “Swiftie” and was very excited about this. Changed made in this remix: Added an acoustic guitar silhouette behind…
Spotify code that takes you to the Taylor Swift home page :) I highly recommend Just using the pre-sliced models, but if you can't: Instructions: Import the code itself and then the code chain of your choice. (Note: code chain 1 is the…
For those that don't know, during The Eras Tour at some point Taylor sits on top of a wooden cabin with a moss covered roof. It looks quite similar to the small nativity set we've had for years. So naturally I made a way for Taylor to sit…
This clip is a spare part for the Suzuki Swift. The original clip was a little bit loose and someday it fell down into the motor area. This happend a few times before, but this time I couldn't find it anymore :-( I designed it with…
Evermore (by Taylor Swift) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
I made it as a Christmas present. Printed the signature parts upside down and glued it to the base. Source of the signature: https://de.wikipedia.org/wiki/Datei:TaylorSwift_Signature.svg
Are we out of the woods yet? Good. Have yourself a merry Christmas with these twin ornaments! Two paper airplanes flying, flying… Inspired by the line in Taylor Swift’s ‘Out Of The Woods’. At 100% scale, each plane is approximately 55mm x…
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No supports needed Scale it as you like :) You can print multi color keychain with a single nozzle (use this video for reference…
Introducing a replacement 3D printed mouse wheel for the Swiftpoint Z Mouse! This model was created due creator's original mouse wheel hex dowel snapping off, rendering the switch and wheel unsupported and unable to rotate. The problem…
Made this for my girlfriend to add a little decoration to her calendar. It is the title of the album, which the photoshoot for the calendar was done for, in a similar font as the original. The print is a little thin to be made with a…
Imagine an old spinning wheel, proudly positioned in the warmest, most welcoming room of grandma's house. It's not just a mere object, but a keeper of stories and secrets, intertwined in the wool threads that have passed through its…
As requested by my girlfriend, I've made some fun, easy to paint/multicolor print Taylor Swift Earrings. Not much for instructions, just print signature side up, no supports and color/paint as you like! They're fairly sizable (60 MM),…
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No Supports needed Scale it as you like :)
This is a quick model I made to celebrate TS12 "The Life of a Showgirl" coming out.
A remix of KTP's Isofix hook to suit the seat back anchors in an A2L/ZC33S Suzuki Swift (2018-2024). Given parts sharing between any given manufacturer's models it's quite possible this will also fit other Suzukis of the same era, but I…
Hueforge print of Taylor Swift's folklore album cover. Print at 0.08mm layer height, 0.16 base layer height., 100% infill. Filament Colours Used: PLA Matte Black PLA Grey PLA Light Grey PLA White Swap Instructions: Black until layer #6 at…
Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)
I design this case for my gf (remix from iphone case voronoi by LinkDesigns, only working case I found out there for the iphone SE 2020 with TPU). She's a huge Taylor fan. I did for iphone SE 2020 but i could do for other models if…
What is the best way to show the power of 3D printing than to quickly make a useful object only achievable with a 3D printer ? (you will need to pause the print to insert magnets) Why you should print these ? A wide open shoe is much…
The Tortured Poets Department - Lithophane Taylor Swift made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Right now I'm calling this style “ Relief Topography ” It's easy to print multi-color images on a single-color printer. I started with black and got lighter with each change. There are 3 stops built into the gcode where you can switch to…
Speak Now (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Showcase your love for The Life of A Showgirl with this keychain
I designed this swift to go with the embroidery bobbin winder https://www.printables.com/model/30815-cross-stitch-floss This is based on a design for a wool swift “Amish Style Yarn Swift (Collapsible)”
Designed this for a friend as a gift, thought other people might like it. Change filament after 4mm (at the beginning of layer at 4.2mm for 0.2mm layer height). I used a line width of 0.25mm, otherwise some of the thinner parts of the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Red (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
As requested by a Reddit user. Work in progress!
Replacement Suzuki Swift ignition switch. Print with supports. Remove supports and clean up print. Optional, fill in letters with paint. Use persuasion to install new switch. Test by inserting physical key and turning the switch. If the…
I was requested by my niece to design a lid for her cup. I made over 10 prototypes to get the seal just right. Although the one shared here is a little lose to make it easier to put on and take off. Adjusting the seal 0.10 mm could get a…
In the words of Taylor Swift… take me to Florida!!! This very simple two-tone print can be done via AMS or by manually switching the filament. Print at 0.2mm layer heights and you can switch at layer 11. The pictured model was printed…
Taylor Swift funko, print in 0.12mm supports required. Printed in FDM, 0.12mm with 0.25 nozzle. supports required, can be printed in one pice. Can be printed with 0.4 nozzle, but need more work to get a good surface for priming and…
Printed at 0.20mm Quality layer height PLA
taylor swift car ferrari 458 italia
The entire making process is the same as the original model. The model is stronger made of PET-G with 100% infill, it is advisable to stick a piece of adhesive tape on top of the original metal key before printing, for better bridging.
Based on OEM 78132-68L01 roof rack cover. You can engrave anything on it in the slicer or just use Your favorite printing plate to give it a finish You want. For short use/cold countries: PETG Recommended: ASA (ABS if painted)
Material: ASA, ABS NO SUPPORTS Parameters: 3 walls 40% infill 3 top/bottom
So I made this Decor of Taylor Swift for my wife. She loves that gal's music so it is a must. Also I am still experimenting with "plotting" with my 3d printer. The model was designed using a vector based on one of her albums? I believe.…
Fearless (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Taylor Swift Reputation Album Cover Lithopane
This is a 3D model of the Swift S-1 Aerobatic Glider . It has a smooth body, long wings, and a clean tail design just like a real glider. I made this model in Onshape using basic tools like loft and fillet to give it a nice curved shape.…
Note: Allow to cool before removing or it could bend. Quick bookmark with the TTPD logo at the top - .2 layer height at 100mm/s Printed on Kobra 2 Neo with a manual color change at height 2.28 using Prusa. I also added a height range…
Taylor Swift album the tortured poets department, CD holder wall mounted
Taylor Swift, The life og a showgirl, CD holder wall mounted
Inspired by the aftermarket options such as this: https://www.rhdjapan.com/rigid-clutch-stopper-duracon-swift-sport-zc31s-zc32s-zc33s.html v3 update: Made the diameter of the insert slightly smaller and increased the depth of the slit for…
Taylor Swift Chiefs Earrings Layered to print with color change Kan (lol) be sized up to be a keychain.
3D scan based outer shell/chassis of the Z2 mouse. Bare frame, top cap for LED section & base frame. Accurate enough to use instead of the original shell as I didn't want to destroy the original during modifications. Reliably printed…
I've made this a long time ago because I wasn't really satisfied by other options out there, I wanted to avoid non 3d printed parts (this build only uses a rubber band and a, camera). This print, screws on the lens filter threads and thus…
Instructions: Buy a 25 mm, 30 mm, or 40 mm elastic band depending on your personal preference. The recommended length for one belt is around 100 cm ± 20 cm. For example, you can use Auckpure 20 Metre Rubber Band Black Width 10mm 20mm 30mm…
I designed this for one of my children because surprisingly there isn't a whole lot of Taylor Swift things I found. I found a signature of hers and used 3D Builder to convert to STL. I then used Tinkercad to make the signature into a box.…
Swift Pen Holder - Ultra-Fast Vase Mode A minimalist pen holder featuring clean lines and an elegant sculptural aesthetic. Designed specifically for Vase Mode, it delivers a flawless, seamless finish with ultra-fast print times and low…
Speak Now (Taylor's Version) Lithopane. Printed vertically at 0.16mm layers. Print at 0% infill, but if you have a suitable filament, 100% infill will work too. Lovely under a light. Print Settings Printer: BambuLab P1P Rafts: No…
I realized that my car (Swift Sport) was missing this cover. So I created one. ABS mandatory. ASA for long lasting result (UV resistant). I should be compatible with any Suzuki model from this era and this specific keyless system.
Taylor Swift album folklore, CD holder wall mounted
Lithopane of Taylor Swift's Midnights album. I printed at 0.16mm layers, printed vertically, at 0% infill - but you can probably print at 100% if you feel like it, depending on your filament and preference. Print Settings Printer:…
Taylor Swift album midnights, CD holder wall mounted
Print yourself a new tall trigger button cap for the Swiftpoint Z / Z2. This part is the same geometry as the original but may include some small modifications for the 3D printing process.
Swiftie Earrings Layered Just do a color change Can be scaled up to be a keychain. Please "Like", review, follow and upload make. I spend a lot of time designing and allow it all to be used for free (including commercially). If you'd like…