Search results: taco

Sort order

547 models

P
PrintablesPipus

Holo Taco nail polish 24 bottles stand

Stand for 24 bottles of Holo Taco nail polish. 3 rows per 8 bottles. The row inner dimensions is width 28 mm, length 226mm. Fit for Holo Taco nail polish bottles, that I had available, is snug. There is 0.5mm tolerance. So the bottles are…

Print approx. €4.94–€6.04 excl. taxPreliminary estimate for one variant

Downloads
278
Likes
45
Rating
4.67
P
Printables-Koso-

Fast Taco Holder

Taco Holder to keep your tacos standing upright! Three files for the most common nozzle sizes. Can be printed in vase mode or normal. Just one perimeter so larger nozzle equals thicker taco holder.

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
171
Likes
24
Rating
5
P
PrintablesDany Sánchez

Taco Shop - Authentic Mexican "Taquería" - Kid's Play Kitchen Cooking Toys

🇲🇽🪅 Let your child embody the ultimate Mexican food experience! 🪅🇲🇽 I designed a 20-piece toy set to play “taquería” (taco shop) in a truly authentic way! As a Mexican designer of all things whimsical, this is a love letter to the most…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
153
Likes
150
Rating
0
P
Printablesdavemoneysign

Taco Bell Bag Vase Mode

We were doing virtual training on our Hexagon Absolute 83 Scan Arm and AS1 Scanner in the lab and when we finished I wanted to scan something more organic. We just happened to have a crumpled Taco Bell bag so we put it up on the table and…

Downloads
13,580
Likes
3,526
Rating
4.96
P
PrintablesAbuzz Designs

Taco Train

Update: The condiment car and condiment caboose have been added. I have not had a chance to print these out yet and while I don't foresee any issues, if you do come across any please let me know. Thanks! Who doesn't need a Taco Train in…

Downloads
1,307
Likes
71
Rating
5

Toyota Tacoma Gas Cap Holder

This gas cap holder fits gen 3 Toyota Tacomas. I recommend printing it PETG or some other material that can survive higher temperatures. PLA will probably warp and become brittle over time.

Downloads
1,257
Likes
146
Rating
4.86

Nail polish stand for 48 Holo Taco bottles.

I designed this rack to fish 48 holo nail polishes. It might fit other brands too but it wasn't tested. It is designed for bottles 28mm X 28mm. It is very sturdy and was designed to be "cat proof" as there has been an incident involving a…

Downloads
1,214
Likes
224
Rating
4.83
P
PrintablesDeuce

Sovol SV08 Taco Bed Fix

My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…

Downloads
1,205
Likes
224
Rating
4.92

CUÑA PARA MATE / TACO PARA MATE / CUÑA MATERA / INCLINA MATE

Es el accesorio ideal para preparar el mate perfecto, tiene la inclinación justa para dejar reposando la yerba y formar la famosa "montañita".

Downloads
1,201
Likes
74
Rating
5
P
PrintablesMYLE

Boardgame Insert - Clank Catacombs & Expansions

Update 2026.10.28: Added a "V2" folder to make the insert compatible with the "Underworld" expansion. The challenge is to fit the small fabric bag inside without adding a lid lift. Any ideas ? ^_^ Todo: Complete the documentation. For…

Downloads
1,200
Likes
108
Rating
5
P
Printablesblack.bunny

Taco Mag Pouch

My first attempt at making a magazine pouch was alright, but I was not very pleased with the outcome. This is why I now present to you this Taco Pouch. It is designed to hold Glock magazines, though I think it would work with similar…

Downloads
1,184
Likes
172
Rating
4.75
P
Printablesiqless

Taco Holder

A simple taco holder designed in openscad. The openscad file is included if you need to make tweaks so your tacos will fit properly :) Youtube

Downloads
797
Likes
110
Rating
4.92
P
Printablesdirtdigger

Toyota Tacoma "Taco Sauce" gas cap holder

Remix of Desert Dave's "Taco Sauce" holder for MMU2S. Intended to be printed face-down to minimize support material and purge tower height. I used Prusament Chalky Blue and jet black. It's not a perfect match for the Cavalry blue, but…

Downloads
788
Likes
134
Rating
4.2
P
PrintablesOstella3D

Yeti 14 oz Rambler Adapter for 2017 Toyota Tacoma Center Console Middle Cup Holder

A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…

Downloads
771
Likes
120
Rating
5
P
PrintablesTruTech

2nd Generation Toyota Tacoma Gas Cap Holder

Modified to fit 2nd gen tacoma. slide in the tab on the right side first to get a firm hold and then use the screw to secure it in place.

Downloads
746
Likes
66
Rating
5
P
Printablesfixumdude

Taco Cat taco holder with handle

Presenting and easy to print taco cat taco holder with a tail for a handle. Based off of the Crussty 50th birthday taco cat model. Prints in place without supports. Examples are printed in Printed Solid Soul Black Glitter and PolyMaker…

Downloads
730
Likes
171
Rating
5
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Gas Cap Holder

You should print in PETG just for heat/durability purposes. There are two versions one that just slides in (minimal) then another that utilizes the screw hole and can be mounted via Toyotas screw (no drilling or modification needed).

Downloads
713
Likes
80
Rating
5
P
Printablesfixumdude

TacoCat Taco Holder for Crussty's 50th Birthday

A special 50th Birthday TacoCat taco holder to honor 50 years of Crussty! Created to celebrate a very special person in the #D Printing Community on a very special birthday! Join in the celebration by posting your makes below, or on…

Downloads
634
Likes
362
Rating
5
P
Printablesscarrson

Toyota Tacoma Hard Hat Hooks

Note: a revised overkill version exists now: Original model: Includes a model for the front and rear seats. EDIT: Sep. 8, 2024 - Added a “rear middle seat” hanger with enough droop to reach under the middle seat head rest. Headrest peg…

Downloads
628
Likes
106
Rating
5
P
PrintablesDr_Pippin

Taco Holder Stand - 3 tacos

Remix to turn the 2 taco holder into a 3 taco holder! We lay a piece of saran wrap over the holder to keep any concerns for food safety at bay.

Downloads
594
Likes
59
Rating
4.33
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Glare Blockers

I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…

Downloads
586
Likes
98
Rating
5
P
PrintablesDinosauer

Taco Tortilla Press

To have the plates facing down on the build plate, i put some effort into redesign the hinges, so they are detachable. Also this saves so much filament compared to printing this with supports. Absolutly no supports needed, all overhangs…

Downloads
585
Likes
75
Rating
5
P
Printablestetralite

2 or 3 Taco Holder

Build and serve tacos with these taco holders. Holds two tacos, or flip it over to hold three. File "TacoHolder.stl" is a little bit larger than file "TacoHolder1.stl". The smaller one is a better fit for the standard pre-formed taco…

Downloads
580
Likes
31
Rating
4.83
P
PrintablesTheKwijibo

Toyota Tacoma Manual Shift Knob

My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a…

Downloads
570
Likes
32
Rating
4.75
P
PrintablesDesertdave

Toyota Tacoma "Taco Sauce" Gas Cap Holder

Do you fill your Tacoma with petrol or Taco Sauce. Well? Tell the world!

Downloads
548
Likes
67
Rating
5
P
PrintablesLAYRLAB

Retro Taco Bell Model Set - 1:64 Scale Diorama

A couple of followers requested a retro Taco Bell model set and I absolutely loved that idea. I remember spending so many nights in the Taco Bell parking lot, hanging out with friends after band practice, eating tacos and chalupas with…

Downloads
531
Likes
134
Rating
5
P
PrintablesKnurbine

Toyota Gen 1 Hilux/Tacoma/4Runner/T100 Dash Switch Cover

This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…

Downloads
512
Likes
67
Rating
0
P
PrintablesDahliamoth

Gravy/Taco seasoning packet organizer

Wife had all these packets in the pantry in a ripped open box from tea packets, I was bored and the printers were idle. So this happened. Each divider inside can hold 2-3 of these packets. I printed it on a lower quality setting bc it…

Downloads
504
Likes
66
Rating
5
P
PrintablesTruTech

Toyota Tacoma Cup holder

The front cup holder uses a smaller rubber holder that get stuck on bigger cups. Made a larger cup holder. I made this one big enough to fit Stanley, Yeti, Corckcicle and other larger bottles and mugs. The insert can shrink the hole size…

Downloads
476
Likes
78
Rating
0
P
PrintablesMrBaconCat

3rd-Gen Tacoma Badges

Badges for a 3rd-Gen Toyota Tacoma. TACOMA, SR5, and V6 emblems are already sized and ready to print. I made these models because I want to print them in black ABS, because I can only find chrome badges for sale, and the OEM Badges I…

Downloads
469
Likes
48
Rating
5
P
Printablesvidision

iPhone Charger Pad for Toyota Tacoma (15W Magsafe Charger)

Matches the shape of the OEM phone cubby. To install: Print as you like. Put the 15W magsafe charger in position. The 25W will not currently fit this model. Press the cord into place on the back, minding the bends. If taping, place 1-3…

Downloads
457
Likes
34
Rating
5
P
PrintablesJohnOCFII

Taco Holder Stand

Typically, I'm a burrito man. But sometimes, smaller tortilla shells are all you've got, and you need to assemble tacos. Not finding a taco stand to my liking, I created this one. It supports two, fairly large tacos. Mine were printed…

Downloads
446
Likes
34
Rating
5
P
Printablesdanny520

Print in Place Toyota Tacoma

2016-2023 3rd gen Toyota Tacoma TRD Pro.

Downloads
420
Likes
56
Rating
5
P
PrintablesGerald Hamster

Tacoma Gen3 Center Console Organizer

Print it upside down so you don’t need any supports, I just kept it right side up for the picture. I printed it in Pa6-CF at 20% gyroid infill. I didn't do PLA because I have heard that PLA melts and warps in hot vehicles overtime. About…

Downloads
417
Likes
59
Rating
4.75
P
PrintablesPatrickWL

Toyota Tacoma 2nd Gen (2005-2011) Grille Emblem

Replacement Toyota emblem for a 2nd generation (2005-2011) Tacoma. The back "fill" piece has two slots built in for cable ties to pass through to secure to the grille. I have included a 1 piece file which you can do a layer change on for…

Downloads
415
Likes
28
Rating
0
P
Printableschochi3D

TACO BELL Logo (2016)

I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.

Downloads
408
Likes
29
Rating
5
P
PrintablesPeterJ

Toyota Tacoma (95-04) 4Runner (89-02) Grill Clip

This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…

Downloads
405
Likes
61
Rating
4.67
P
Printablesjustctrl

Toyota Tacoma center console tray

Note that this will fit 2024+ Tacomas only! The Tacoma has a lot of space in its center console, but it's deep relative to its width; a tray insert makes it a lot more usable. You could buy a similar part, but why buy when you can print?…

Downloads
377
Likes
44
Rating
3
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Molle Panel

There are two versions, one that can be screwed in or another without holes that you could maybe use 3M tape.

Downloads
373
Likes
102
Rating
5
P
PrintablesFalkien

Sovol SV08 Bed Riser Strips (Taco bed fix)

I created this to help with the Tacoing of the SV08 bed. Some of the Sovol SV08 beds center along the Y axis is lower than the left and right side on the Y axis. This causes the Taco effect. I made 320mm x 25mm x 1mm strips that when…

Downloads
367
Likes
56
Rating
5
P
PrintablesEli Jeffers

Toyota Tacoma Belt

I designed this because I i use my truck around the farm and don't want to wear my seatbelt when driving low speeds and when I'm in and out of the truck, Tested with 3rd gen Tacoma only. THIS WAS NOT MADE TO OVERRIDE THE SAFTY FEATURES IN…

Downloads
357
Likes
44
Rating
0
P
PrintablesJoe Kaiser

Tacoma Bed Hook

This is a simple bed hook that fits the 3rdGen Tacoma stock bed rails. Twist it 90*, insert it into the rail and rotate it up. It should be tight enough that it doesn't slide around. I printed it with 6 walls and 25% infill. That may be…

Downloads
349
Likes
73
Rating
0
P
PrintablesTacoDan

Tacoma HAM Radio Mount

Hi all! I created this UV5R Radio mount for my 2010 Toyota Tacoma TRD Off-Road. I printed it face down without any issues. It is designed to be used with the belt clip provided with your radio. I added 3M automotive mounting tape to the…

Downloads
340
Likes
89
Rating
5
P
PrintablesSteven Quinn

Dinosaur Chip / Taco holder (Quesadillasaurus)

A stegosaurus themed holder for chips, street tacos, quesadillas — whatever!

Downloads
334
Likes
85
Rating
4.67
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Cubby Drawer

Fits into the empty slot on the driver side and serves as a nice little drawer

Downloads
323
Likes
57
Rating
5
P
PrintablesMrdc04

Taco shell holder

Yes another taco shell holder. Printed with PLA 25% infill No supports

Downloads
319
Likes
46
Rating
5
P
PrintablesDalankar

Warcry Catacombs Terrain Set

Ready to expand your Warcry games to the Catacombs game mode that pits your Warbands against one another in a cramped & deadly dungeon? Use this terrain set to get you there! All the parts have been designed to be compatible with a…

Downloads
299
Likes
60
Rating
5
P

TACO Taco Holder

Just added “TACO” on top on the model. For you Captain Obvious guys out there ;)

Downloads
296
Likes
30
Rating
5
P
PrintablesSteveS42

Taco Holder

I designed this a couple of years ago because I could not find any holders for my preferred square bottom tacos.

Downloads
296
Likes
42
Rating
5
P
PrintablesUncle Jessy

Chick-Fil-A Sauce Holder - Toyota Tacoma

This is a remix of Maker__Guy's awesome Chick-Fil-A Cup Holder. I made this for my Toyota Tacoma and the little rectangle holder. I modified this in TinkerCAD and printed in PETG on the Raise3D N2+ Full video is available here to see it…

Downloads
294
Likes
124
Rating
5
P
PrintablesOwen S

Toyota Tacoma 05-15 Bed Side compartment NRS Strap or tool Holder

This design replaces the smaller side compartment on Toyota Tacoma 2005-2015 models. This model includes a latching door mechanism based off of the latches on the two larger side hatches in the bed and off of @AP_81926 original model for…

Downloads
287
Likes
81
Rating
5
P
PrintablesThomllama

Taco

if ya can't get one.. print one.. just don't try and eat it!! an absolutely awesome remix is available here - https://www.thingiverse.com/thing:3185543 Print instructions Category: Food & Drink

Downloads
286
Likes
17
Rating
0
P
PrintablesOnlyPaul

Tentacool & Beacon for VzBoT & Goliath Short

Desing taken from Mirage's Hevort project - https://hevort.com/ 19.5.2024 - Created variant Rev. D (E) 23.5.2024 - Added variant for Rev. H BOM: - 4pcs M3x5x4 brass heat inserts - 2pcs M3x12 screw - 2pcs M3x10 screw Beacon Rev. D (E)…

Downloads
281
Likes
31
Rating
5
P
PrintablesPrinterGuy74

1995 to 2004 Toyota Tacoma Door Handles

One of the few negatives of first gen Tacomas are their door handles which are known to crack. Some of the non-OEM handles are made out of a materiel that does not hold up in freezing temperatures. After snapping a handle this winter I…

Downloads
280
Likes
30
Rating
0
P
PrintablesGhiaKarmann

4th generation Tacoma/6th gen 4Runner BIG cup holder MOLLE panel

Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…

Downloads
279
Likes
29
Rating
5
P
PrintablesMouse

Build-A-Taco

Build-A-Taco is a simple three part print that allows you to join a shell, veggies, and meat into your very own taco! I had limited color options. This taco can be scaled up for you who are true taco lovers! Recommended print setting: No…

Downloads
279
Likes
24
Rating
0
P
PrintablesElectricCrowbar

Capybara Taco holder

Capybara that can hold a single taco. Category: Sculptures

Downloads
277
Likes
59
Rating
5
P
PrintablesJamie Clarke

VZ-TentaCOOL (The Kraken)

Whilst this model may appear NSFW, i assure you it is a cooling duct for people running CPAP blowers. I thought people in the VZbot community might like to try it so i remixed it to make it mountable to the VZbot cpap system. I would…

Downloads
277
Likes
14
Rating
0
P
Printablessaftysquints

Tentacool + Beacon for VZ-Printhead

I quickly made this model based off of Hevort's Tentacool. It's not super tested yet so let me know what problems there are. It did require me to further restrict the CPAP duct to allow for the Beacon connector, but seems to work OK so…

Downloads
273
Likes
33
Rating
0
P
Printablessensitivewoo

Taco Shell Holder

Top, bottom and walls 4, 30% infill.

Downloads
270
Likes
82
Rating
0
P

Toyota Switch Blank Bic Lighter Holder (1st Gen Tacoma, 3rd Gen 4Runner & more)

This will fit in the switch blank locations on many early Toyota models including the 1st Gen Tacoma, 3rd Gen 4Runner, and Toyota Pickups (plus others). Fits one standard size Bic lighter.

Downloads
270
Likes
21
Rating
5
P
PrintablesDenis

Hotwheels Tacoma 3D Scan

A very rough 3D Scan of a Hot Wheels Tacoma. Feel free to remix it to make it better

Downloads
263
Likes
32
Rating
5
P
Printables8bitmcu

1:16 Toyota Tacoma RC

1:16 Toyota Tacoma This is the second model I scale down to 1:16. This model is a lot harder to print and assemble then the 1:16 80's Dodge RAM , but has a lot more to offer! It is assembled with common M3 hardware, has a working hood…

Downloads
261
Likes
81
Rating
0
P
PrintablesNinjaChurch

Nail Polish Rack (Holo Taco)

I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.

Downloads
256
Likes
56
Rating
5
P
PrintablesBröake Atelier

Audio Jack Dust Cap Cover Plug for 6.35mm or quarter inch & 4.4mm Pentaconn

Made a dust cap/cover/plug for my desktop amp cuz I usually use it's RCA out at the back instead. Tryna prevent dust buildup and also perhaps slow down any oxidation on the contact Made one cuz I couldn't find one online. Available in f3d…

Downloads
255
Likes
32
Rating
5
P
PrintablesTheWhiteCliffs

3rd Gen Tacoma Door Inserts

These are made to be pressed into the gap on the inside door handle. Print this in TPU! If you print it in any hard filament it likely will not fit! It's designed to be a tight fit that the TPU can squeeze into. Occasionally they may…

Downloads
250
Likes
50
Rating
5
P
PrintablesJarrod Berry

2024 Tacoma Mag Safe (15w) Charger

This is a Remix of a Mag Safe Charger for a 2024 Tacoma. 3D Print Face down with no supports needed. PETG or ABS/ASA recommended to prevent melting in the Truck. The Mag Safe charger wire can be hidden in the print. Use alien tape in the…

Downloads
249
Likes
21
Rating
5
P
PrintablesPatrickWL

Toyota Tacoma ARB Safari Snorkel Cover

Remix scaled to 115% and the long edges flared to fit the profile of the ARB Safari snorkel for the 2005-2015 2nd generation Tacoma (part no. SS171HP ) Category: Automotive

Downloads
248
Likes
25
Rating
5
P
PrintablesTeo_211

Toyota Tacoma Wall Art

Toyota Tacoma Lunar Rock Wall Art Silhouette model. Adjustable size.

Downloads
247
Likes
44
Rating
5
P
Printablesscarrson

Toyota Tacoma Shovel Holder

I got tired of my snow shovel sliding around the bed, so made some simple hangers to mount the shovel to the OEM strut rails. Includes two (2) types of strut blocks: T-Slot Block = Most secure, but must slide in the whole way. If you have…

Downloads
244
Likes
79
Rating
0
P
PrintablesTim Bradley

Tacoma (3rd Gen) Cup Holder Adapter for Yeti

Tacoma (3rd Gen) Cup Holder Adapter for Yeti

Downloads
240
Likes
21
Rating
5
P
PrintablesAshyr

4th Gen Toyota Tacoma Glove Box Drawers and Shorter Divider for JKCover Glove Box Organizer

I have a 3rd Gen Toyota Tacoma that also has a glove box organizer by JDMCAR that uses Joshua Dennis' Toyota Tacoma Glove Box Drawers . My dad recently got a 2024 Toyota Tacoma and purchased a JKCOVER Glove Box Organizer . He liked my…

Downloads
234
Likes
51
Rating
3.5
P

Toyota Tacoma Center Console Latch

My wife's 2010 Toyota Tacoma center console latch broke (the little pieces that hold it in snapped off), so I took the part, some calipers, and sat down at my computer to CAD up a new one! Took a few iterations, but the resultant part…

Downloads
234
Likes
40
Rating
0
P
PrintablesCrooksUSA

2005 Toyota Tacoma 5 speed manual shift knob - FIXED slicing issues

Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…

Downloads
234
Likes
20
Rating
4
P
Printablesar3Dprints

3rd Gen Toyota Tacoma

Thank you all for the downloads and likes, will continue to post more designs :)

Downloads
233
Likes
50
Rating
0
P
PrintablesMichi Selos

Pentacon Six P6 Body Cap

A Camera Body Cap for Cameras with Pentacon P6 Bayonett. Like Pentacon Six, Practisix, Exakta 66, Kiev 6C, Kiev 60, Kiev 88CM, Hartblei and Arax. The one in the Photos was printed in ABSX without Supports.

Downloads
231
Likes
11
Rating
5
P
PrintablesKev

2nd Gen Tacoma A/C control knobs

Press fit together can put drop of glue on the inside if needed. They are staying for me without any glue. Used clear filament for the selector. Must use the metal sleeve from factory selectors, used a little pick to work them out.

Downloads
230
Likes
20
Rating
0
P
PrintablesPatrickWL

2nd Gen Tacoma 4.0 Oil Fill Funnel Adapter

Thread in adapter and funnel for the 4.0 2nd Gen Tacoma Funnel is from https://www.thingiverse.com/thing:980665/files Category: Automotive

Downloads
218
Likes
48
Rating
5
P
PrintablesMr_3D_Printer

Taco Stand

Have you ever been making a Taco but you had your hands full and you couldn't keep on making it? Worry no more! Introducing my Taco Stand. Being able to connect to as many of itself as you can print, you can hold not just one but as many…

Downloads
213
Likes
19
Rating
5
P
PrintablesMeuon

Toyota Tacoma/Tundra (and others) Key Fob Case

My OEM key fob broke, turned into a good FreeCad lesson (file included). Simple rugged design, prints well as 1 piece, trim the sprue and assemble with 2 M3 wood/plastic screws.

Downloads
212
Likes
28
Rating
5
P
PrintablesTheo Portillo

Inclina mate para la montañita/ Taco para montañita/ Soporte mate

Sirve para tener la inclinacion perfecta para hacer la famosa montañita, yo recomiendo imprimirlo de costado ya que no usa soportes. El material en este caso no importa mucho, yo lo hice en PLA+ si se requiere una duracion extrema puede…

Downloads
208
Likes
6
Rating
0
P
PrintablesJC Wollslager

Clank! Catacombs - Magnetic Tile Holder and Insert

For the record, this was my first attempt at making something like this and it shows. Files are all pretty self-descriptive, and I didn't really do anything specific with settings. If you do want to put this together for some god awful…

Downloads
207
Likes
24
Rating
0
P
PrintablesGhiaKarmann

Toyota Tacoma (4th generation) bed top rail shim (for use with Deck Rails in original factory location)

The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap…

Downloads
203
Likes
23
Rating
5

Toyota Tacoma Truck Bed Rail T-Clip

This model was developed with the purpose of creating a modular system that can be used to mount things on the truck bed rails of a 3rd gen Toyota Tacoma. Developed in association with LineArcLine, the system features a T-clip system that…

Downloads
200
Likes
49
Rating
0
P
PrintablesBrian Acton

Toyota Tacoma (Gen 3) Reverse camera mount

A mount relocation for people looking to mount the gen 3 Tacoma camera to a flat panel

Downloads
197
Likes
23
Rating
0
P
PrintablesMrDaedalus

Taco Cat Goat Cheese Pizza card holder

The cover it a little tight.

Downloads
197
Likes
17
Rating
4.67
P
Printablesironkiwii

kawaii fast food - taco v1

i made this taco so that i can practice my blender skills. not my fav but it's cute. let me know how it prints. i added a pause in between the eyes and toppings because i only have one ams unit. i can change the filament from black to…

Downloads
197
Likes
32
Rating
0
P
PrintablesZac Reinke

Taco Hitch Cover | Toyota Tacoma

A taco hitch cover for your Taco

Downloads
192
Likes
56
Rating
5
P
PrintablesRamirez62463

Tacoma Tailgate Bushing

This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.

Downloads
191
Likes
8
Rating
0
P
PrintablesAlanBCM

Toyota Tacoma TRD Pro 2016-2023 Grille Letters

Description Replacement grille letters designed for most 2016–2023 Toyota Tacoma TRD Pro–style grilles. These letters were modeled as a functional replacement for the OEM grille lettering. To make them easier to print, I left out the…

Downloads
187
Likes
19
Rating
5
P
PrintablesDeJaVuDu

3 Taco Holder

I have only printed this once and it turned out ok. It was a bit shaky at the top before the two bars meet at the top. Next time I will have supports for the upper third and 50-100% infill. The base started to curl up, about 1.5mm at each…

Downloads
185
Likes
25
Rating
0
P
Printablesjodo

Popular taco and tortilla stand

This taco and tortilla stand has been a life saver when preparing taco dinner for the kids. It gives you the chance to prepare five tacos per stand before calling the rest of the family to the table. You actually get time to eat as well…

Downloads
185
Likes
54
Rating
4
P
PrintablesLordOgreCorsair

Dungeon stick sewers and catacombs

Some dungeon stick sewers/catacombs Print Settings Printer: Kossel Delta Rafts: No Supports: No Resolution: 0.3mm Infill: 25% Filament: Bilby3D ABS Translucent Category: Models

Downloads
183
Likes
43
Rating
0
P
PrintablesDeniz Gulsoy

Toyota Gen 1 Hilux/Tacoma/4Runner/T100 Dash Switch Cover

This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…

Downloads
183
Likes
24
Rating
5
P
PrintablesJosh Smith

2nd Gen Toyota Tacoma Switch Cover

These models can be used to replace the switch covers located below the radio unit. There are a few variations: Blank Press fit USB (may require super glue) Microphone (using standard aftermarket radio microphones)

Downloads
182
Likes
27
Rating
0
P
PrintablesTallboy

Tentacool part cooling incl. Beacon mount for Goliath Long WC on vzBotxHevORT alu printhead

The HD12MGN9 Tentacool Beacon duct by MirageC and sillysam71 has been adapted to decrease the y-offset. It has also been lowered slightly to fit my setup, please refer to the pictures. A suggested print orientation and support layout for…

Downloads
177
Likes
28
Rating
0
P
Printablesrtarbutton

3rd Gen Toyota Tacoma Phone Holder

There are two sizes to accommodate thinner thicker phone cases. I am more than happy to make variations for whatever size you need! STEP file also available for your editing needs! Print in ASA, ABS, or PETG. Needs to withstand heat and…

Downloads
176
Likes
39
Rating
0
P
PrintablesWilsonIdaho

3rd Gen Toyota Tacoma triple switch plate

Triple switch plate for the cubby to the left of the steering wheel. Fits the tall Toyota push button switches. Category: Automotive

Downloads
173
Likes
46
Rating
0
P
PrintablesMr Practical

Tacoma and Tundra Bed Rail Eye Hook

Eye hook for 3rd Gen Tacoma. This is a very tight friction fit clip for Gen 3 Tacoma bed rails. The hole is not super huge but should allow for most netting clips and bungee chord. 6 walls and 20% infill is recommended.

Downloads
171
Likes
37
Rating
5
P
PrintablesGunRatchet21

Taco Stand

Easy to print Taco Stand. Supports are not needed unless you have issues printing the arches.

Downloads
169
Likes
11
Rating
0