Search results: tainer

Sort order

8,686 models

P
Printablesgdrag

Silica gel spool container

I redesigned from scratch my favourite silica container by Malolo. I loved absolutely everything about it, except that it prints a little slow. I used horizontal slots so that it prints much faster with less retractions and hops. In 0,3mm…

Downloads
43,485
Likes
11,196
Rating
4.94
P
PrintablesSytan

Mini Hanging Storage Container

This was an unintentional remix. I actually started a design for a pill container on my own, and then found this one, which was very similar! I reverse engineered their lid design, as my first one was trash, and then I improved upon it as…

Downloads
22,676
Likes
5,055
Rating
4.92
P
Printables3D_Workspace

Silica-Gel-box (spool-container, optimized for super fast print)

These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…

Downloads
20,784
Likes
5,003
Rating
4.85
P
PrintablesNasBoc

Shipping Container

Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…

Downloads
17,924
Likes
2,512
Rating
4.96
P
PrintablesLV3D

Knurled Containers

🌀 Knurled Containers Stylish and practical screw-top containers with a diamond knurled surface for a firm grip and clean look. Perfect for storing small parts, screws, accessories, or any desktop items. Custom heights available on request…

Downloads
13,440
Likes
3,062
Rating
4.97
P
PrintablesLV3D

Knurled Container

Compact container with screw-on lid and textured grip. This is a 3D printable screw-top container featuring a knurled (cross-hatched) surface for better grip. The simple cylindrical design makes it ideal for everyday use and easy to open…

Downloads
11,613
Likes
1,866
Rating
4.93
P
PrintablesMalolo

Malolo's Silica Gel / Desiccant Containers

I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…

Downloads
11,400
Likes
2,050
Rating
4.94
P
PrintablesRegal_Prop-Shop

Regal & Markiplier - Iron Lung Blood Bucket Popcorn Container

Regal has partnered with Markiplier's Iron Lung movie, to provide fans the ability to print their own collectible popcorn container. Working with Iron Lung's creature creator, Molly Brown (@deadlymelodic), Regal's Prop Shop team created…

Downloads
11,056
Likes
471
Rating
4.55
P
Printablesgimpelginster

Modular Skadis Container System (S)

These are some small skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. If you need some more space, you could print the Modular Skadis…

Downloads
10,422
Likes
3,827
Rating
4.93
P
PrintablesMeister Edel

EDC Container Box Capsule + O Ring

--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…

Downloads
9,387
Likes
3,450
Rating
4.94
P
PrintablesPointNemo

Outdoor Container / Pill Box

Sizes (Diameter x Height): 30 x 25 mm 30 x 35 mm 30 x 50 mm 42 x 35 mm (2 mm and 3 mm thread) 42 x 50 mm (2 mm and 3 mm thread) 42 x 65 mm (2 mm and 3 mm thread) 66 x 50 mm 66 x 65 mm 66 x 80 mm Printing Parameters: Resolution: 0.2 mm…

Downloads
9,351
Likes
1,529
Rating
4.97
P
PrintablesGunplaMark

The Ultimate Cereal Container Filament Drybox

NOTE: While still in use by a lot of people, this version of the drybox system has been deprecated in favor of the updated one here: My previous filament drybox model became more popular than I ever imagined, and after taking on a lot of…

Downloads
8,583
Likes
2,124
Rating
4.82
P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Downloads
7,422
Likes
1,358
Rating
4.83
P
PrintablesRohweron

Small Containers with Screw Lid

Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…

Downloads
7,333
Likes
1,699
Rating
4.82
P
PrintablesGeddy

Sea Container v3.0 (Stackable, 1:43 scale)

Logo free version is available here: Commercial version is available here: The new 1:64 scale container is now available here: About Sea Container v3.0 This is improved design of the stackable Sea Container at scale 1/43. It is compatible…

Downloads
7,208
Likes
3,526
Rating
4.98
P
Printablesh3li0

pulse · container

pulse · container modern minimalist container design with twist lock lid, with two different lid options - closed and with an inner hole (can be used for heets as an example) dimensions in mm: container ~ x: 74 · y: 74 · z: 81 lid ~ x: 74…

Downloads
6,203
Likes
1,538
Rating
4.93
P
PrintablesJudhini Prints

Parametric Minimalist Storage Container with Thread

Discover the Parametric Minimalist Jar with Thread —the ultimate blend of style and functionality for your 3D printing needs! This sleek storage container not only looks fantastic but also serves a practical purpose in keeping your space…

Downloads
6,081
Likes
1,532
Rating
4.9
P
PrintablesGunplaMark

The Ultimate Cereal Container Filament Drybox - Official Remix

My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…

Downloads
6,060
Likes
1,255
Rating
4.82
P
Printablesvandragon_de

COS - the Container Ship

A container or cargo ship belongs to every bath tub fleet. I once drew a small and a particularly large version. The swimming characteristics are still very good even when fully loaded. Have fun printing :) Video: Print instructions Video…

Downloads
6,057
Likes
888
Rating
4.94
P
PrintablesThe Next Layer

Threaded Container (quick screw)

This model was missing from Printable so I upload with credit to the original creator under Creative Commons.

Downloads
5,917
Likes
940
Rating
4.92
P
Printablessquinn

Container Pod (Parameterized)

A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…

Downloads
5,459
Likes
1,757
Rating
5
P
PrintablesMiguel M.

Twist Lock Container, Multiple sizes, Stackable.

This is a set of containers with a twist lock lid. The containers are roughly 4 inches in diameter and come in 5 sizes : 2, 3, 4, 5 and 6 inches. There are four dots on perimeter of the lids that align with the locking features on the…

Downloads
5,458
Likes
1,936
Rating
4.89
P
PrintablesArrowSwift

Improved Bullet Container

I got some Sunlu Gold PLA for Christmas and I knew what I had to print with it. It won't kill any werewolves (yes I know those are silver bullets don't get mad at me you can print it in silver), but man does it look sick. I changed the…

Downloads
5,206
Likes
989
Rating
4.91
P
PrintablesKim-Janosch

IKEA SKADIS Containers – 18 Sizes

Pick the size that fits: storage containers in 18 sizes for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 18 sizes For cable ties, pens, small…

Downloads
5,185
Likes
835
Rating
4.93
P
Printablesorangethanos

Hello Kitty Pencil/Paint Brush Holder/Container

I transformed Hello Kitty into a paint brush holder for my roommate. Supports needed. Pictures show 100% scale with general paintbrushes. I printed her sitting up. Please message if you have any issues :) This model was inspired by the…

Downloads
4,985
Likes
395
Rating
4.82
P
PrintablesTinkrMakr

Knurled Container Modular Threaded Stackable

Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…

Downloads
4,791
Likes
887
Rating
4.94
P
PrintablesTitanori

Modular Honeycomb Storage Container / Label space

Modular Honeycomb Storage Container with space for label This Container is a customizable storage solution designed for makers, hobbyists, and organizers. The modular container features: Screw-On Lid : Secure threaded lid for easy access…

Downloads
4,666
Likes
1,803
Rating
4.97
P

Print In Place Mario Coin Block Container

Here's a nostalgic container for the gamer in us all! I designed this model to print in place, and it needs no supports. Updated 8/31/23: I added a catch on the tail of the question mark to keep the block closed. Check out my Game Holder…

Downloads
4,625
Likes
1,094
Rating
4.9
P
PrintablesTomek

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

Downloads
4,611
Likes
812
Rating
4.88
P
PrintablesDrJones

mini bottle cap container (pill box)

This is just a simple and very small bottle cap container, i.e. you use ordinary bottle caps as lid. It adds only 5mm height to most bottle caps. At least for all the caps I tried, the cap closed nicely and tightly. EDIT: There are 2…

Downloads
4,150
Likes
1,175
Rating
4.97
P
PrintablesNiro
Downloads
4,067
Likes
1,034
Rating
4.18
P
Printabless0ren

Design your own container

Use OpenSCAD 2026 or newer to customize the design to your needs: https://openscad.org/downloads.html#snapshots Instructions Open the file "design your own container.scad" in OpenSCAD The panel on the right contains numerous parameters…

Downloads
4,016
Likes
1,007
Rating
4.96
P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Downloads
3,995
Likes
564
Rating
4.83
P
Printablesvandragon_de

EMMA - a Container Ship

Emma is based on a Container Ship but adapted to my bathtub ships. The game play value this time is very high, just like the printing time. Many containers may be loaded and unloaded for play. This not only pleases the bathtub captain but…

Downloads
3,794
Likes
616
Rating
4.95
P
PrintablesSabre Design

Small travel container

Small storage container for cremes, cosmetics, hair product etc. Great solution for traveling. Container has a 10ml volume. Thread is tuned for the corners of the lid to line up perfectly with the container when using PLA filament, fit…

Downloads
3,780
Likes
990
Rating
4.89
P
PrintablesJake

Gridfinity post-it sticky notes stack container

UPDATE : I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the…

Downloads
3,724
Likes
478
Rating
4.98
P
PrintablesDrJones

container sets with bayonet lock

These containers come in sets of 6 which fit into each other, so they can be stored efficiently. The sets differ in their heights. use a bayonet lock (twist/click lock in 3D-printing slang) with a nice click due to some springy elements,…

Downloads
3,700
Likes
1,076
Rating
4.95

Lightsaber Collapsible Light Saber with blade retainer

A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…

Downloads
3,450
Likes
666
Rating
4.94
P
PrintablesMOrmesher

Ikea 365 Food Container Lid Hanger - Parametric

This is a parametric hanger for Ikea 365 food storage container lids - you can tweak how wide you want it, how many hooks, what size screw holes, and how many screws It was inspired by neuromorph's model linked below but remade from…

Downloads
3,434
Likes
1,698
Rating
5
P
PrintablesSabre Design

Planter with drip container

This free planter is part of the Juno Planter Collection, you can see the whole Juno collection below. The complete set is available on my patreon shop, printables store and exclusive patreon or printables memberships:…

Downloads
3,432
Likes
1,288
Rating
4.93
P
Printableslaurens

cigarette container with lighter

there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…

Downloads
3,376
Likes
709
Rating
4.79
P
PrintablesExtrutim

Silica Box | Silica Gel Container | Fits Standard Spool

This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool. The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven. Holds over 100g…

Downloads
3,362
Likes
458
Rating
4.95
P
PrintablesTater Zoid

Rugged Container 30mm Edition - 6 Sizes

30mm Rugged Containers This set of Rugged Containers features a 30mm interior width with various internal heights. The heights range from 20 to 70mm. This allows a great size range for a variety of personal uses. These, along with my…

Downloads
3,337
Likes
1,351
Rating
5
P
PrintablesLMaker

Multipurpose waste container

This is a waste container I design to use for multiple propouses like bambulab X1/P1 waste, pencil holder, store boxes… and other propouse you can give it. In the following steps, I'll explain what you need to do to assemble the…

Downloads
3,325
Likes
1,414
Rating
5
P
PrintablesKerndrup

Festool Rails for Systainer3

Guide Rails for the festool sustainer 3. There are 4 versions Version 1= Cut in half so they fit smaller printers with ribs on the bottom Version 2= Cut in half so they fit smaller printers with solid buttom Version 3= Full size with ribs…

Downloads
3,277
Likes
592
Rating
4.67
P
PrintablesJamehz

Everdell Complete Collection Resource Containers

This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I…

Downloads
3,193
Likes
410
Rating
5
P
Printablescmyk

Desiccant Spool Container with a twist

I needed a better desiccant container solution for my cereal box spool containers. Most models take too long to print and do not have enough holes. My design is 45% nothing. Meaning holes. Meaning air can flow freely. It uses 14g of…

Downloads
3,177
Likes
1,149
Rating
4.5
P

Fabergé Egg Maze Container (with or without mmu)

Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…

Downloads
3,175
Likes
991
Rating
4.98
P
PrintablesComrade_Zach

Doob tube, joint container.

Easy to print. No supports.Threaded cap. Not a flimsy tube.

Downloads
3,116
Likes
289
Rating
4.9
P
PrintablesScubaSteve

Stackable Pill Travel Container (now with v2)

I wanted an adjustable pill caddy for traveling. I wanted something that could adjust based on the number of days I would be traveling. This model has 3 parts. Top (Lid), Middle (Mid), Bottom (Base). The middle part is threaded on top and…

Downloads
3,093
Likes
942
Rating
4.78
P
PrintablesSabre Design

Acorn decoration container (tealight compatible)

Acorn autumn decoration. Available in large and small size, large is 150 mm tall and small 104 mm. The inside of the bottom is hollow to save on filament and to allow an electronic tea light to shine through when using translucent…

Downloads
3,056
Likes
965
Rating
4.93
P
PrintablesBlazko

Poop Chute with removable Container | Bambu Lab P2S/P1S/P1P/X1C

Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…

Downloads
3,019
Likes
136
Rating
4.83
P
PrintablesWindrose

Woven Heart Container | Tall

This is a tall version of @JamesThePrinter's lovely Woven Heart Container model. The original version is about 60mm tall, while this is about 85mm. This basket is perfect for storing anything that might be slightly larger in size. Prints…

Downloads
2,891
Likes
775
Rating
5
P
PrintablesDasMia

Pineapple Container

Keep your sweets in a fitting container! Or your other stuff - you can't go wrong with a pineapple container. It's a simple print, no supports needed. Just print a pineapple (smooth or with spikes) and a lid - that's it! It's also no…

Downloads
2,857
Likes
339
Rating
4.83
P
PrintablesDrJones

customizable silica gel container (vase mode) with funnel

This is a container for silica gel: It has quite a lot of holes and in total a quite high hole area ratio, so great air flow . It is printed in vase mode, which makes it quite fast to print (especially without retractions) and it uses not…

Downloads
2,813
Likes
786
Rating
4.98
P
PrintablesTitanori

TESSAINER 120 Asanoha Screw Top Container

A spacious screw top container featuring a detailed geometric pattern inspired by traditional Asanoha designs. The repeating star shaped structure covers both the container body and lid, creating a distinctive decorative surface while…

Downloads
2,789
Likes
653
Rating
5
P
Printablesh3li0

crest · container

crest · container modern minimalist container design with twist lock lid, in two sizes 75mm diameter ~ x: 75 · y: 75 · z: 78 105mm diameter ~ x: 105 · y: 105 · z: 110 photos show printed in wood and matte pla .40mm nozzle .16 layer height…

Downloads
2,786
Likes
905
Rating
5
P
PrintablesDrJones

inside-cap screw container, various sizes (incl. pencil case)

A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…

Downloads
2,762
Likes
519
Rating
4.97
P

EDC-Container

just another small container for a keychain, backpack etc. Put in your hearing protection, matches, pills, drops, banknotes or whatever. The lid is 1mm larger in diameter for reasons of stability There are two different versions of lids.…

Downloads
2,761
Likes
602
Rating
4.79
P
PrintablesBlue Wings

Ikea Skadis Pegboard Container Box

I remixed this design to include hooks that allows the box to be mounted to the pegboard without having to glue hooks. This means that supports are needed during printing. I have used Tree support rather than normal support as it is…

Downloads
2,714
Likes
426
Rating
4.89
P
PrintablesPaul

Skadis Hex Container / Pen Holder

A simple container with hexagonal cutouts for the Ikea Skadis system . I personally use it as a pen holder. The only side that has no hex cutouts is the back so it's more stable and in my opinion it looks better too. I used so many…

Downloads
2,708
Likes
349
Rating
4.95
P
PrintablesMichael

Parametric OpenSCAD Round Container Jar with a screw lid

Updated 16 Nov 2024 - inlude chamfer option Updated 27 Nov 2024 - Smooth Sides option I was looking for a parametric round container with a screw lid. Couldn't find anything on Printables but found an excellent design over at Thingiverse.…

Downloads
2,669
Likes
155
Rating
5
P
Printablesh3li0

sylo · container

sylo container with screw lid diameter: 100mm height: 100mm and 50mm options + lid includes profiles for x1c and a1 mini 10% cubic infill variable layer height notes includes bambu studio 3mf files and STLs all photos uploaded are of the…

Downloads
2,667
Likes
873
Rating
4.67
P
Printablesbriancmoses

Gridfinity AA Battery Containers

I have a bunch of Panasonic Eneloop AA batteries and I've learned that they're slightly wider than a standard AA battery. As a result, I figured I'd go ahead and design my own #gridfinity container. I was able to modify Jamie's OpenSCAD…

Downloads
2,639
Likes
220
Rating
4.34
P
Printablesder_da

Parametric OpenSCAD Round Container Jar With Screw Lid

I was looking for a parametric round container with a screw lid. Found the model by https://www.printables.com/@michaelh on Printables and adjusted it to my needs (see the differences section). The file is using the great…

Downloads
2,604
Likes
188
Rating
4.86
P
Printablessts210

100x70x100 Container with HSW Adapter

Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…

Downloads
2,599
Likes
525
Rating
4.96
P
PrintablesMartin_au

Screw and small parts storage container and drawers

A box with drawers for lots of screws and things. Print the main case rear downwards and you won't need supports. Wall thickness optimised for a 0.6mm nozzle. Update: 10/12/23. A few people have had issues with tight clearance of the…

Downloads
2,597
Likes
365
Rating
4.31
P

Egg Maze Container cactus pattern

Egg-shaped puzzle container with “cactus like” ribbed pattern on the outside. This maze is not complex, without too many long dead-ends; but there are no external indicators of where the “pointers” in the maze are located. Designed to…

Downloads
2,586
Likes
279
Rating
5
P
PrintablesSirPrintsALot

Festool T-Loc Systainers Reference Models

Found these on Grabcab by Ben: https://grabcad.com/library/festool-systainers-sys-t-loc-1 Wanted to share here. These are not my designs.

Downloads
2,572
Likes
270
Rating
5
P
Printablesdtxtr

AA / AAA Battery Storage Container

A simple storage crate for AA and AAA batteries.

Downloads
2,570
Likes
435
Rating
5
P
Printableshexvolt

PolyDryer Extra Desiccant Container

Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…

Downloads
2,545
Likes
446
Rating
4.96
P
PrintablesFirstlayer Oy

Stackable Storage Bins/Containers with Lids (2 versions of bins and lids)

Stackable Storage Bins with Modern Honeycomb Pattern Introducing our versatile 3D-printable stackable storage bins, designed with a sleek modern look and a distinctive honeycomb pattern. These bins are perfect for organizing a wide range…

Downloads
2,536
Likes
581
Rating
4.64
P
PrintablesDusBus

Screwable pill container

I wanted something simple, rugged and compact to EDC one pill of Ibuprofen, without its packaging being damaged by other tools I'm carrying in the same pocket. It was my first attempt at designing something with a thread in FreeCAD and it…

Downloads
2,526
Likes
482
Rating
4.93

Grenade Stash Keychain Container

Discover the ultimate blend of style and functionality with our 3D Printed Grenade Stash Keychain Container! This unique keychain accessory is designed to securely store small items while adding a touch of adventure to your everyday…

Downloads
2,447
Likes
963
Rating
4.75
P
PrintablesGuto

Gridfinity MakPac Systainer Baseplate

Gridfinity baseplate for Makita MakPac Support needed (Someone printed it upsidedown and it worked but I didn't try) It does not fit in the MakPac type 4 (sorry el_flexos ). I'll try to create a new version for it. Makpac Case Type 1…

Downloads
2,409
Likes
376
Rating
4.83
P
Printablesbiketiger

DESICCANT CONTAINER

Designed to fit inside center hole of filament spool in storage. Prints with no support necessary.

Downloads
2,404
Likes
276
Rating
4.89
P
PrintablesTorte

Bed storage container

Bedside table too small? Tired of tossing your accessoires to the ground when trying to grab them in the dark? Hook this container to the side of your bed to have your glasses, hankies, etc. always at hand. Printing: Bed-storage-hook: Two…

Downloads
2,348
Likes
1,198
Rating
4.92
P
PrintablesTeteomat

Pistachio Bowl | Snack Container with Shell Holder | Modern Design - Contenitore Pistacchi 2 in 1 | Snack Bowl con Porta Gusci | Design Moderno

Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…

Downloads
2,333
Likes
606
Rating
4.84
P
PrintablesSMACKMAX_

Loot Crate Storage Container (with optional Watch & Ring Display Inserts)

03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…

Downloads
2,331
Likes
1,500
Rating
4.8
P
PrintablesJerryie

Containers with Screwtop Lid set

Round containers with a practical screw-on lid, available in 60x40, 70x40, 80x40, 90x40, and 100x40 sizes. Perfect for storing 3D spare parts, or small tools , keeping them neatly organized and securely sealed. Choose from a variety of…

Downloads
2,309
Likes
725
Rating
4.95
P
PrintablesPan_Barszczyk

Threaded container

I've modeled this container in blender. It actually threads surprisingly well. (water tight) Print Settings Supports: No Resolution: 0.2mm Infill: 20% Filament: Spectrum PLA Blue lagoon Notes: Printed with 50% original scale.…

Downloads
2,298
Likes
203
Rating
4.73
P
PrintablesHami

Filament waste container, poop basket / Filament Abfallbehälter

There are two versions with different hole sizes. The smaller hole size is easier for printing. No supports are required for either version. Suitable for my Anycubic Kobra 3 filament waste diverter…

Downloads
2,280
Likes
162
Rating
5
P
Printablesh3li0

ruck · container

ruck · container minimal screw-lid container, designed for function and form dimensions in mm: container ~ x: 85 · y: 85 · z: 105 lid ~ x: 85 · y: 85 · z: 13 important · make sure that: your filament is dry and calibrated so that it deals…

Downloads
2,270
Likes
734
Rating
4.83
P
PrintablesDani C

Pill style container

A small container with external dimensions of only 80mm high (3.15") and a diameter of 25mm (1") (varies by model) this container offers an internal space of 76x20mm (3"x0.78"). The models can be combined with each other, they can also be…

Downloads
2,242
Likes
859
Rating
4.64
P
Printablesmatthijsbos

Festool Systainer Organiser Boxes

Printable container boxes for Festool Systainer Organiser (such as item number 204852). The sizes 25x25 and 25x50 are particularly useful for small components. Sizes in combinations of 25, 50, 75, 100 and 150mm. Larger variants can be…

Downloads
2,239
Likes
488
Rating
5
P
Printablescampy

Silica Gel Container

Silica Gel Container with a closing lid held by a small clip.

Downloads
2,231
Likes
303
Rating
4.7
P
Printabless7emar

IKEA SKADIS Bin / Shelf / Container

Bin for IKEA SKADIS. The model has attachable hooks so they can be easily reprinted if they ever break. Sizes Small Size: L: 90mm / W: 90mm / H: 40mm Medium Size: L: 170mm / W: 90mm / H: 40mm Large Size: L: 245mm / W: 90mm / H: 40mm…

Downloads
2,212
Likes
382
Rating
5
P
Printablesgimpelginster

Modular Skadis Container System (M)

These are some skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. They are compatible with my Modular Skadis Container System (S) , and (L) .…

Downloads
2,185
Likes
897
Rating
4.81
P
Printablesbriancmoses

Gridfinity AAA Battery Containers

I have a bunch of Panasonic Eneloop AAA batteries and I've learned that they're slightly wider than a standard AA battery. As a result, I figured I'd go ahead and design my own #gridfinity container. I was able to modify Jamie's OpenSCAD…

Downloads
2,179
Likes
150
Rating
4.75
P
PrintablesRaym00n

FlashForge Adventurer 5m (AD5M) Hot end retainer with fan duct (silencer)

**UPDATED:: 07/11/25 Attempted to add FF logo =). Loaded it as a .3mf since I added it in slicer. 07/04/25 Adjusted the fan muffler angle and depth for better fit to hot end Cut lateral piece thickness down for better clearance and…

Downloads
2,154
Likes
258
Rating
4.88
P
PrintablesJohannes

Container for Ikea Skadis

Just a simple container for all of your stuff

Downloads
2,127
Likes
530
Rating
4.94
P
Printablesvandragon_de

Trucks for my Container Ships

So that the fun of the game continues even outside the bathtub, I provide two trucks to transport the containers. So let's get to the fun of the game.

Downloads
2,101
Likes
352
Rating
4.86

Airtight Bic + 2 smokes container with O-Ring

O rings that should work: https://www.amazon.com/Nitrile-Rubber-Rings-Metric-Sealing/dp/B0BFMWKP79/ https://www.amazon.com/uxcell-Rings-Nitrile-Rubber-Diameter/dp/B07W72F7RF…

Downloads
2,097
Likes
614
Rating
5
P
PrintablesSébastien

IKEA SKADIS Container Divider

I've made 25 different sizes, so hopefully you will find the one perfect for you.

Downloads
2,081
Likes
684
Rating
5
P
Printablesjq910

Parametric Screw Top Container

v17: Fixed issue with lid grips not changing when the lid height is changed. A simple screw top container made in fusion 360. Print at 0.2mm layer height if you are using the default thread parameters (0.75mm). I recommend printing out…

Downloads
2,067
Likes
150
Rating
4.93
P
PrintablesTater Zoid

50mm Rugged Container with Gasket

This is the 50mm (interior diameter) sized canister of the original Rugged Waterproof Container. I submerged the container in the photos for over an hour, and found it to be fully waterproof. - with the TPU gasket installed. I used Prusa…

Downloads
2,051
Likes
522
Rating
5
P
Printablesk97

Festool Systainer Schiene / Rail

Durch die Rillen kann die Schiene um 13 cm verschoben werden und der Werkzeugkasten kann direkt nach dem Herausziehen geöffnet werden. Lochdruchmesser für die Schrauben beträgt 3,7mm Gehäusebreite zum Montieren beträgt 410mm, max. 415mm…

Downloads
2,050
Likes
331
Rating
4.67
P
PrintablesProject34

Honeycomb Storage Container

Honeycomb Storage Container Two honeycomb pattern options Don't forget to- like share print and follow!

Downloads
2,037
Likes
537
Rating
5
P
PrintablesAdam-M

Dog Treat Container - Small

Dog Treat Container - Small A small container for dog treats. Unscrews for filling. Lid rotates to slide open and closed preventing spillage. Why I designed this because, although dogs love all my coat pockets being full of treats, I…

Downloads
2,030
Likes
351
Rating
4.78
P
PrintablesSt3rn Design

Moire ⬝ Container

Sculptural container featuring flowing moire curves and a twist-on lid Dimensions ⬝ mm ▪ 100mm height version - x:71 ⬝ y:71 ⬝ z:100 ▪ 120mm height version - x:85 ⬝ y:85 ⬝ z:120 Print ⬝ Profile ▪ 0.40mm nozzle ▪ 0.20mm layer height ▪ 15%…

Downloads
2,009
Likes
722
Rating
5