Search results: tal

Sort order

16,531 models

P
PrintablesMatt-G

Playstation 5 (ps5) horizontal stand

one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…

Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant

Downloads
21,540
Likes
1,775
Rating
4.89

Mechanical Tally Counter 5.0

READ BEFORE PRINTING! This is a non-commercial print, this means you are not allowed to sell files or prints of this model. ______________________________________________________________________________________ What is this? This is my…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
16,780
Likes
9,461
Rating
4.78
P
PrintablesJon May

Playstation 5 (PS5) Digital Horizontal Stand

I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…

Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9,108
Likes
777
Rating
5
P
Printablesalecs.form

Extruded Fractal Flake

Extruded fractal flake prototype. A predecessor to the fractal flake vase I made some years ago. The basic shape and parametric model is almost the same: A variation of the Koch-curve with hexagons, which changes in rotation and…

Print approx. €6.55–€8.01 excl. taxPreliminary estimate for one variant

Downloads
6,976
Likes
1,727
Rating
4.94
P
PrintablesMatt-G

Playstation 5 (PS5) horizontal stand minimalistic version

Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,493
Likes
371
Rating
4.94
P
PrintablesSASSy Design

Tradicional Triangle short and tall Vase - vase mode print

A new take on my previous design - i changed it into two vases. They fit well togheder especialy printed in two diverent fillaments. Easy to print in vase mode (1 or 2 layers) - filament PLA/ASA Happy printing! :D

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant

Downloads
3,212
Likes
590
Rating
5
P
PrintablesTipTop

Dental Floss Holder with Tensioner V2

This design represents a dental floss holder that fixes the main problem of almost all floss holders - tensioning! Floss tends to stretch almost immediately, causing handling problems. My design uses a movable part that serves the…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant

Downloads
2,794
Likes
376
Rating
4.71
P
PrintablesTBone

Level 7 Sierpinski Fractal Pyramid (Vase Mode)

After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…

Print approx. €87.94–€107.49 excl. taxPreliminary estimate for one variant

Downloads
2,778
Likes
369
Rating
4.89
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,360
Likes
399
Rating
4.33
P
Printableskevsparky

Radius Gauge for Digital Calipers

A radius gauge for finding the corner radius of items. Can measure radii from 0 to ~100mm. Also included is a quick-reference label that can be printed on a DymoLabel printer, and stuck on. Rename the label file to “.label”, as…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,107
Likes
358
Rating
4.75
P
PrintablesSASSy Design

Geometrical Crystal - Pot and planter for House Plants - Vase mode

A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…

Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant

Downloads
1,981
Likes
592
Rating
5
P
PrintablesFreddyZ

fully printed talon mag

Features : smooth layerlines along direction of insertion = STRONG and SMOOTH . Designed specifically with NO SUPPORTS , NO crazy overhangs. The “roof” of mag body is chamfered and recessed; meaning bad bridging performance does not…

Print approx. €3.45–€4.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,936
Likes
259
Rating
4.75
P
PrintablesSmoothDragon

Flexible fractal finger fidget (vase mode)

I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
1,787
Likes
366
Rating
4.83

Greco/Roman Pedestal

This was an experiment using an AI 3D model generator called meshy.ai The results were pretty neat! Not the highest resolution, or cleanest, and I had to make sure the bottom was flat for the print bed, but for a free model generator…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant

Downloads
1,677
Likes
374
Rating
4.86
P
PrintablesJacob Desforges

Nintendo Switch Horizontal Dock Foot

My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
1,528
Likes
313
Rating
4.98
P
PrintablesFlexi-Maker

Print-in-Place Articulated flexi Baby-Kristall Drache

Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…

Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant

Downloads
1,499
Likes
274
Rating
5
P
PrintablesSASSy Design

Tall Geometrical Bonsai Pot and planter

A simple and easy to print vase mode pot and planter for your plants. Best to print using dubble layered vase mode settings, using any filament you want. Happy printing :D

Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant

Downloads
1,403
Likes
348
Rating
4.94
P
PrintablesSerial-Comma

Horizontal Chest Mount for Insta360 Cameras

Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,354
Likes
124
Rating
5
P
Printablesrepod

Horizontal Paint Brush Holder

I needed a holder to hold my paintbrushes horizontally and not on the wall. Couldn't find an existing one so made this. Included the STEP files and print files in case you want to modify it at all.

Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant

Downloads
1,335
Likes
128
Rating
4.25
P
PrintablesJKM

PrusaCoreOne adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,292
Likes
25
Rating
0
P
PrintablesRomain

iPad Air 2 Stand - Vertical / Horizontal

You can use this stand to keep your iPad air 2 at vertical or horizontal as per the pictures.

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant

Downloads
1,180
Likes
88
Rating
4.75

Burj Khalifa 828mm tall,high detail, scale 1:1000 3Dmodel

Burj Khalifa , the tallest building in the world, 1:1000 scale model There are several 3D models of this building on the Internet, I printed one myself as a gift for my cousin, who was in Dubai and saw this skyscraper. I am fascinated by…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
1,178
Likes
150
Rating
5
P
PrintablesKollin

Dental Floss Pick Dispenser (Flossers)

Easy to print. No supports needed. Simply load flossers as seen in picture, insert twister, snap on base. Designed to work with Meijer brand interdental flossups . Also works with Aim brand precision floss picks (thanks @Lacemaker!). Will…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
1,171
Likes
263
Rating
4.33
P
PrintablesBP3D

Reusable Dental Floss Pick Kit Card (Extra Strength) (1pc & 6pc)

Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
1,090
Likes
469
Rating
4.75
P
PrintablesJKM

PrusaXL adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,038
Likes
13
Rating
0
P
PrintablesvmLOGIC

Mini Tripod for smart phones and digital cameras

The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
862
Likes
174
Rating
5
P
PrintablesThebigfoot

Thermo/Hygrometer holder for small digital thermo/hygrometer

Printed in PLA black to achieve a nice and strong print is printed facing down, textured and smooth beds are giving very differents finishes. Link to the thermohygrometer available on amazon:…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
823
Likes
113
Rating
4.89

Stand for dental drills

Adeed stl file Other similar models are in the Dental collection: https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338 Pla or petg , 0,1mm-0,15mm

Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant

Downloads
791
Likes
102
Rating
0
P
PrintablesSASSy Design

Dark Crystal Urn Plant pot and Planter - Vase mode design

A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…

Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant

Downloads
736
Likes
136
Rating
5
P
Printablesvrata48

Carrera Digital 132 Supports

Set of supports for Carrera Digital 132. The original package contains just few so this is convenient way how to get more. I plan to add more supports types.

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant

Downloads
684
Likes
76
Rating
5
P
Printablesoplak

Lazy Suzanne/turntable horizontal spool holder

From my experience, only Prusament rolls fit properly in the grooves under the Mini. And even then, it doesn't turn super smoothly. I made this lazy Suzanne so that I can use it with any filament brand, no matter how wide the center hole…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
646
Likes
134
Rating
4.82
P
PrintablesPrism08

Portal axle for UNIMOG RC (1/10 scale)

I'm releasing the second subset of my future RC car (a 1/10 UNIMOG chassis as accurate as possible - that's the goal !). The first subset was a limited slip differential you can find at…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
586
Likes
95
Rating
0
P
PrintablesLode

LEGO 42141 Horizontal Wall Mount

I wanted to hang my McLaren F1 horizontally, but I couldn't find a bracket for it. So I made one! Fusion 360 files included, feel free to modify. The screw holes might be a bit small, but I had no problem with 4mm screws. Gcode file is…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
463
Likes
56
Rating
5
P
Printablesclockspot

Midcentury Nixie Digital Clock Case

This case is designed for Nixie clocks with top-view tubes, but can easily be modded to accommodate other displays and controls. It is inspired by the lovely midcentury design of the Italy-made IME KB6 calculator input/display unit. The…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
459
Likes
396
Rating
5
P
PrintablesAngelR

Digital Bike Speedometer (Arduino)

This is a speedometer for your bicycle - powered by an Arduino Nano. It uses a linear Hall effect sensor mounted on the front shock absorber and a magnet mounted on the front wheel in order to count the revolutions of the wheels. Using…

Print approx. €7.36–€8.99 excl. taxPreliminary estimate for one variant

Downloads
455
Likes
94
Rating
0
P
Printablesmaxelman

Tall Milwaukee Packout long bins with cutout (2 and 3 long)

Fits Milwaukee PACKOUT 5-Compartment Small Parts Organizer I included single piece files as well as a version cut in half with 4mm bar inserts to help hold it together when glued. Also works well with this single bin if you'd like to do a…

Print approx. €16.35–€19.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
438
Likes
99
Rating
0
P
PrintablesAinon3Dtisk

Fantastic fairy tale house

Hello, Welcome to my profile, full of models and miniatures :-) I have a Fantastic Fairytale House for you. It would be great for a diorama or as a garden decoration - like mine. It prints really well. You need to use support! If you are…

Print approx. €11.21–€13.70 excl. taxPreliminary estimate for one variant

Downloads
426
Likes
95
Rating
5

Stand for dental drills

Stand for dental drills for 10 drills 2,35mm Other tooth-shaped stands for drills, stands for pens and brushes can be found here: https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
384
Likes
51
Rating
5
P
PrintablesSASSy Design

Iceberg crystal - ice structure - vase mode print

A simple to print iceberg crystal. Great for dioramas and DnD games or for testing your printer. Prefered print method is vase mode. I used PLA filamment. Happy printing!

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
359
Likes
52
Rating
5
P
PrintablesPeter Farell

Snake Wrapped Around Crystal Ball

Snake Wrapped Around Crystal Ball

Print approx. €14.35–€17.53 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
129
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF004-digital-numbers-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
101
Rating
5
P
PrintablesCAR

Motorola T200 T400 Talkabout Replacement Clip

I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
336
Likes
16
Rating
4.67
P
PrintablesPeter Farell

Krystal from Star Fox

Krystal from Star Fox

Print approx. €9.30–€11.36 excl. taxPreliminary estimate for one variant

Downloads
329
Likes
50
Rating
0
P
PrintablesDn3d

H0 Tunnel portal 2-track similar Noch Profi/ H0 Tunnelportal 2-gleisig ähnlich wie Noch Profi

English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…

Print approx. €5.48–€6.70 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
14
Rating
5
P
Printablesthijsputman

Landscape-mod for Fractal North Pi

Landscape-mod for Fractal's wonderful North Pi . Most of my Raspberry Pi's are running headless and are connected via Ethernet (using PoE), so the original design (with the rear ports mounted upwards) resulted in Ethernet cables messily…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
280
Likes
38
Rating
5
P
PrintablesCAR

Superior Clip for Motorola T200 T400 Talkabout Walkie-Talkie

Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
272
Likes
21
Rating
0
P
Printablese0en

A miniature digital piano / keyboard (No MMU required)

I made this model as a little additional surprise piece for a gift. To print this model, one needs a slicer with a color switch functionality, and of course, two different colors of filaments. Modeled with FreeCAD 0.21.2. Size 125mm x…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
42
Rating
5
P
PrintablesBurgessG

Horizontal Baseball Bat Holder / Adjustable

I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…

Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
254
Likes
58
Rating
0
P
PrintablesEl_Gato

Walkie Talkie

Spielzeug für die Kids

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
253
Likes
17
Rating
5
P
Printablesjzmuda

Remix Dental braces / dental splint box

box for dental braces or dental splint.

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
245
Likes
20
Rating
0
P
PrintablesGustav

Easy to install stealthy AirTag holder for Xiaomi M365 scooter

A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
57
Rating
5
P
PrintablesCalebTimoteo

Tall Ceramic Vase - Home Decoration

Any feedback would be greatly appreciated. Nozzle 0.4-0.8mm Layer Height 0.2-0.3mm (Recommended) No supports needed Scale it as you like :)

Print approx. €6.41–€7.83 excl. taxPreliminary estimate for one variant

Downloads
232
Likes
102
Rating
5
P
PrintablesAndy Wings

Dental Guard Case - Print in place

A simple box to store my dental guard. External dimensions: 76 x 64 x 24 mm Printed with 0.4 nozzle, 0.30 layer height.

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
231
Likes
19
Rating
5
P
PrintablesAllpa

Rail-Adapter for Milwaukee M18 FMCS metal circular saw / Schienen-Adapter für Milwaukee M18 FMCS Metallkreissäge

I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…

Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant

Downloads
231
Likes
53
Rating
5
P
PrintablesPIZZA_CAT

DT830B DIGITAL MULTIMETER STAND

STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
225
Likes
34
Rating
5
P
PrintablesMiniTerraTales

Stone/Brick base/pedestal for your miniatures

Stone base | Brick Pedestal | Miniature stand | Display base | Miniature accessory Customize the dimensions for your miniatures. I look forward to seeing your creative setups and photos featuring this base. Have a happy printing time 💛

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
34
Rating
5
P
PrintablesRobdanig

Beach sand shovel sieve metal detector

Couldn't find the right size sieve for metal detecting duties so drew one myself. Printed in 4mm thickness but I feel that 3mm would have been sufficient. Model is quite large, could be scaled 80-90% and still fit an adult hand comfortably.

Print approx. €15.38–€18.80 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
26
Rating
0
P
PrintablesPeter Farell

Candy Cane Femme Fatale

Candy Cane Femme Fatale

Print approx. €12.31–€15.04 excl. taxPreliminary estimate for one variant

Downloads
187
Likes
33
Rating
0
P
PrintablesChrisfu

Mounting aids for orbital sander discs and delta sander sheets

I grew tired of constantly repositioning my 125mm sanding discs on my orbital sander to achieve proper centering. Uncentered discs result in imbalance, leading to increased tool vibration, making it challenging to achieve a smooth and…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
46
Rating
0
P
Printablesnerdyviews

Companion Cube Coaster (Portal)

Need a companion for Valentine's Day? Go ahead and print a Companion Cube coaster from Portal! You could even print 6 of these and make an actual Companion Cube! Print layers: 0-1.80mm Pink (Can also print first 1mm as white or grey to…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
182
Likes
88
Rating
5
P
PrintablesSica

Towel Hook for horizontal radiator (bathroom)

My wife bought a set of 4 towel hooks for the bathroom radiator, but their grip was awful and every time we picked the towel would grab the hook also and fell on the floor. Pretty noisy in the middle of the night. Also after a few falls…

Print approx. €1.03–€1.25 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
22
Rating
5
P
PrintablesDokkie

Gangle masks from The Amazing Digital Circus

3D printable model of two Gangle's masks. Printing instructions Everything is configured in the 3MF file, but I highly recommend at least adding more perimetres , because you'll be doing a load of sanding. And for best result supports are…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
50
Rating
0
P
PrintablesTritanium Joe

M18 Horizontal Battery Holder, non-locking!

I hate having to unclip my batteries to remove them from storage and liked the look of this model. So, I decided to remix it to my tastes. The indent removal allows you to slide batteries in and out easy! The slight upward angle will help…

Print approx. €4.15–€5.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
173
Likes
31
Rating
5
P
PrintablesRadim Mach

Stojan pro talíře

Stojan pro talíře do karavanu. Stojan navržen pro velké talíře o průměru 240mm, hluboké talíře o průměru 214mm a malé talíře o průměru 190mm. Sada talířů je po 6 kusech. Součástí modelu jsou odnímatelné zarážky pro bezpečný transport v…

Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant

Downloads
171
Likes
64
Rating
0
P
PrintablesLucianociri

Perilla para horno horizontal

Hice dos diseños para el horno de un amigo que se le habían roto. Las imprimí el PLA pero no es lo más recomendable porque no tienen mucha resistencia al calor.

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
13
Rating
0
P
Printables3DHippo

Skeleton with Cantaloupe

I got the opportunity to work with a 3D scanner and I scanned some skeleton I had lying around, because I thought it needed a nice hat. If you love this design and want to see more fun projects like it, consider joining my club on…

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
37
Rating
5
P
PrintablesNina Máčová

Ornamental number 2 (1)

20 cm, topper, house number, bookmark, stencil

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
45
Rating
5

Improved holder for TwoTrees Laser "Focus Assist Metal Column" v1.0 — TTS-25 (2.5W), TTS-55 (5.5W), TTS-10 Diode

With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
26
Rating
5
P
PrintablesPeter Farell

Pip Avacado : Italian Brainrot

Pip Avacado : Italian Brainrot.

Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
12
Rating
0
P
PrintablesCZFreeboy

Horizontal Lightsaber Stand remix - Obi Wan Kenobi

Remix of https://www.printables.com/cs/model/206581-horizontal-lightsaber-stand%2Fcomments I wanted it with a name tag :)

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
39
Rating
4.75
P
PrintablesKboruff

Brutalist David Cheeseman

Brutalist David Cheeseman is the most expensive piece of modern art cheese in the game Supermarket Simulator. People have asked and attempted to recreate this figure and I decided to just post it. If you want to download and print out…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
17
Rating
5
P
PrintablesPhil Caruso

Dental Pick Holder

Update August 3, 2023: Added a PrusaSlicer file and a Prusa MK4 g-code file for a fuzzy outer wall variant. Note that I have also created a Q-Tip Holder that is a longer version of this Dental Pick Holder - so you can make both for a…

Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
129
Likes
17
Rating
5
P
PrintablesNate Wismer

playstation portal stand remixed with logos ! (under print files)

remixed exsisting design to add playstation logo in center and the playstation button logos on backrest

Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
4
Rating
0
P
PrintablesMiłosz

Volume knob for motorola talkabout t82

This part is almost identical to the original. It fits perfectly, but it’s a tight fit, which guarantees it won’t come loose. The knob was printed in PET-G, though I also tested PLA (it works the same). It was printed in the normal…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
4
Rating
0
P
PrintablesAlmasu

Llave taladro

Se coloca en la cabeza del taladro y sirve para fijar la pieza de trabajo.

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
16
Rating
0
P
PrintablesFrogg

Very very tall monster high doll shoes

Monster high doll shoes, 136.982 mm tall

Print approx. €2.84–€3.48 excl. taxPreliminary estimate for one variant

Downloads
126
Likes
18
Rating
0
P
PrintablesMireCZek

FIVE-PETALLED FLOWER CUTTER / VYKRAJOVÁTKO PĚTI LISTÉ KVĚTINY

Five-leaf piston flower cutter that is used to cut out marzipan flowers for decorating, for example, cakes. / Pětilisté pístové vykrajovátko květiny které slouží k vykrajování marcipánových květin na zdobení například dortů. When…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
15
Rating
4
P
Printablesmono—3D

Hooks for kitchen wall shelf Ikea Grundtal

I got tired of my hooks regularly falling off my shelf when I took items from the original Ikea hooks, so I designed hooks that clip onto the bar and are secure in place. Works with kitchen wall shelf Ikea Grundtal or any 16 mm diameter…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
14
Rating
5
P
Printablesmultilayers

FRANCE GERMANY POLAND ITALY HOLLOW MAPS

Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
18
Rating
5
P
PrintablesL4chy20

Crystal/Gemstone Phone Stand

Phone Stand to suit most phones, Tested on my Samsung s21 and partners Iphone both stand and have good viewing angles. Can be easily scaled to fit Nintendo Switch/Tablets other protable devices. Printed

Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
21
Rating
5
P
PrintablesKiko64

Metalsaw blade handle

handle for a metal saw blade; rúčka na pílový plát

Print approx. €1.90–€2.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
111
Likes
17
Rating
5
P
PrintablesTUS

Fractal Design Torrent bottom fan mount

Fractal Design Torrent bottom fan mount for front AIO / radiator (maximum radiator length supported is 420 mm x 120 mm x 40 mm) baseplate support 2x 180 mm fans and up to 3x 360 mm fans ***Doesn't support 140 mm fans. The reason is, not…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
110
Likes
9
Rating
5
P
PrintablesPrelzel

Ford Drive Pinion Oil Seal Installer

This tool is used to install the drive pinion oil seal for the rear diff on a ford flex (and other ford models). The actual ford tool has part number 205-208. I guessed the dimensions by measuring my diff and looking at pictures of the…

Print approx. €12.36–€15.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
6
Rating
0
P
PrintablesQuinn

Capillary Toys (Educational / Experimental)

Just add water. Notes: Print in PLA – although the ideal material would be Nylon The top reservoir is for reagent, and should stop flowing when it reaches the main branch, unless there is liquid in the main branch Use a paper towel as a…

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
29
Rating
0
P
PrintablesRay Fox

Tall Drinking Glass

Print with 0.6 nozzle at .2 layer height, 4 perimeters and 40% infill, aligned rectangular to make it water tight.

Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant

Downloads
106
Likes
9
Rating
0
P
PrintablesTD3D

Verstallbarer Winkelanschlag

zum Beispiel für die Tischkreissäge

Print approx. €5.49–€6.72 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
14
Rating
0
P
PrintablesCraig Heath

TePe Interdental Brush Stand

A remix of WillYerb's elegant brush holder. I added one more row, so that when I'm using the last one of a colour, I can add a new pack of 8 behind it, plus two extra columns for different sizes. I also made it 3mm taller, so that the…

Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
3
Rating
5
P
PrintablesMS_D3sign

Jarrón Espiral Elegante con Detalles Calados

Este jarrón impreso en 3D presenta una cautivadora forma espiral que asciende desde una base redondeada hasta una boca con un delicado borde ondulado. Su diseño se caracteriza por un patrón de aberturas caladas que siguen la trayectoria…

Print approx. €7.94–€9.71 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
3
Rating
0
P
Printablesnevim

Holder for towel (it cannot be accidentally taken off)

Easy to print holder for towel. Use PETG so it is stronger, but PLA is also possible to use. Brim is not necessary but if its not holding on the plate then use brim. Use 0.20 layer hight with 25% infil and 2 perimeterrs. Here is video on…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
18
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem2 Digital FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Digital enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the included…

Print approx. €4.42–€5.41 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
6
Rating
0
P
PrintablesREMLURELMI

Honda Ridgeline/Talon Door Latch Pin

Retaining pin for the cubby door in 2017 or newer Honda Ridgelines 71509-SZA-A01 Also fits the Honda Talon Air Cleaner Outer Cover - (thanks @JustSomeEngineer !) : Recommended Print Settings Print Orientation: Default as modeled Material:…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
23
Rating
5
P
PrintablesNina Máčová

Ornamental number 2 (1)

20 cm, topper, house number, bookmark

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
27
Rating
0
P
Printablesjowings

Trex Decking 1/2n Inch Overhang Tool - Without Facia Installed

Much like my first iteration of this product, this tool allows you to have a perfect ½" overhang on your picture frame trex deck boards. This tool differs from the original in that you can lay your picture frame boards without first…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
94
Likes
12
Rating
0
P
PrintablesJosef Adamcik

Toothpaste, dental floss, and inter-dental brush holder

Simple custom holder for some dental hygiene utilities: toothpaste, dental floss and inter-dental brushes. It's supposed to be attached to a wall with montage tape. Print instructions No supports needed.

Print approx. €3.26–€3.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
8
Rating
4
P
Printablesredtahr

shelf hoook/bracket for the outside of metal shelving frames

printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
18
Rating
0
P
PrintablesNina Máčová

Ornamental number 3 (2)

20 cm, topper, house number

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
29
Rating
0
P
PrintablesJirkaDe

tall battery cover for Nikon EN-EL15

A cover for protecting a spare Nikon EN-EL15 (or compatible) battery based on a great cover by @PiJey_88387 enhanced to also cover a USB-C charging connector found on a Jupio EN-EL15C ULTRA C battery. Printed in PETG with 0.2mm layer…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
10
Rating
0
P
PrintablesNina Máčová

Ornamental number 4 (3)

20 cm, standing, toppers, stencil, bookmark, house number

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
20
Rating
0
P
Printablesariadnafx

Sherlock Holmes bookend sujetalibros

Bookend for you Sherlock Holmes book collection.

Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
12
Rating
0
P
PrintablesBogdan Safta

Sony PVM SS-X7A - APM-X5A Speakers Pedestal

Pedestal with attachment holes and washer designed for use with SS-X7A / APM-X5A speakers on compatible Sony Trinitron monitors. Printing Instructions: 1. Pedestal: - Print with a brim. - Use organic supports. 2. Angle Adjustment Screw…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
86
Likes
6
Rating
0