397 models
Modified the main parts of the Dentures by iplop and NotThatDusty to also have some openings on the bottom and top so the whole thing can have magnets on the outside as well and stick to metal surfaces when the jaws are fully opened. I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
EN: Purely functional simple EZ to print hairband, nothing special. CZ: Funkční, jednoduchá čelenka, tiskne se OK.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Teeth
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Yes, I made this specifically for the contest. The idea hit me, and last I checked, no one else had done one, so here we are. Thanks to openscan for the dental model that formed the basis of this model. I'd recommend PETG for the clip,…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Vampire Dental Prosthetics, Zombie Teeth, R, Perfect for Halloween Costumes, Carnival Mask Shows, Photography Props & Theme Parties, Halloween Costume, Carnival, Dramatic Effect Teeth
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Rather then painting the original model ( https://www.thingiverse.com/thing:2994999 ) I just wanted to print the teeth in another colour. My prints were at 50% scale, since that is the scale I printed the original design at. These did not…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Lego Fibonacci gear 27 teeth
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
I designed this model to save my two little daughters teeth when they fell off. I feel it like it a good memory to keep. I have put money under the pillow and get the tooth anyways (Tooth Fairy). Currently I'm on a military deployment, so…
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
For completion, you need to glue 4 pieces of magnet cylinder 8mm diameter, height 4mm. The date can be written on the lid. Pro kompletaci je potřeba vlepit 4 kusy magnetu válec 8mm průměr, výška 4mm. Na víko je možné zapsat datum.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
During use, the gardening rake always breaks its teeth. I wanted to have rake with replaceable teeth so I have designed one and printed it. The teth click into the rake body and are easily replaced if broken. The rake is designed also…
Print approx. €4.79–€5.86 excl. taxPreliminary estimate for PETGSource material: PET
HI! print this idler / selector with different material, but it's a waste every time; so i came with this simple design combine the 20t 6mm gt pulley with the tensioner to make it more solid, hope it can make the process less complicated…
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
Did you or someone you know have a great week of consistent teeth brushing , or gone to the dentist and got a great report of no cavities ? If so, an award is needed to celebrate such extraordinary success! This is an easy print, that…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
For our little fir tree we needed a halloween custome! ;-) I used the multicolor functionality of my Prusa XL printer.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ This is a full dice set for your tabletop games and roleplaying! All of the dice and the jawbone are printed flat…
Who hasn't seen a print-in-place herringbone planetary gear… probably a version from Emmett . However I recently developed a different method for those gears which allows planet gears with only 3 teeth (actually also with 2 teeth, but…
remodeled teeth inspired by medical scans and moldings made my dentists - Upper and lower part fit into each other like real teeth but each can stand on their own. Size should be accurate to that of an adult. If u import the file into…
Mini box for the first fallen teeth Other similar models are in the Dental collection : https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
Here it is! The remixed Teeth of Terra by Cornivius. I've done my best to make this into a multipart kit that's easy to print and assemble. Glue is optional for everything but the pipe, all other parts go together with Openlock clips -…
Pla 5% You may need help sticking to bed. No supports needed.
Some spooky teeth for your pumpkin, print as many as you need at a scale that fits your pumpkin. Edit: added better grip to the teeth
I added teeth because original design was slipping on my handles. Category: 3D Printing
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
Found this amazing Alien Queen done by Sandon https://www.thingiverse.com/thing:2090893 Unfortunately he has a NO Derivatives license. Totally his call to protect his model from dilution and to honor that I can not upload the changes I…
This is the very first raw test scan data done with a raspberry pi + camera and my DIY 3d printable photogrammetry rig. Everything is based on open soft- and hardware. So feel free to check out my website www.openscan.eu/?lang=en…
5 sprocket with various teeth number - module 3 (pitch 9.42mm) to be optionally used in combination with sprocketand pinion https://www.printables.com/model/1266062-rack-and-pinion-module-3 Printed with Flashforge Adventurer 5M Pro…
I wanted halloween teeth for the miata and didn't like using just a flat piece cut to shape so I drew this up. Teef 1 and 2 are ~75mm tall while 3 is 120mm tall. TEEF 1 are the one in pictures. Just changed dimensions so people would have…
A set of digital dentures Upper and Lower models. Please note, custom made dental devices are patient specific and these will not be suitable for anyone else except the person they were made for. These are for demonstration purposes only…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
I created a version 2 that is solid instead of hollow. If you rotate the model so the teeth are straight up, the slicer will have no errors. Additionally no supports or brims are needed to successfully print.
This clip was actually perfect except for the fact that I would like to have small teeth on it, this model already existed and was printed by me several times. However, I print quite quickly and in my case especially, because I usually…
I separated the teeth in blender for us peasants without a multicolor printer. Printed on my Ender 3 V2 NEO.
Planetary reduction gear for belted z-axis driven by NEMA 17 stepper motor. It has a reduction ratio of 5:1 and 25 GT2 teeth. This results in 10 mm/rotation. It may be mounted as a drop-in extension/replacement if your current drive has…
hey guys i design this Brush Teeth Holder ,hope you like it Type : PLA..ABS…PETG… Printing Time : 8 hours Machine : CR10 Smart Support : YES Infill : 7%
Printing in PETG at 100% infill and heating up the clip to bend it fully closed wasn't enough to make the clip hold onto the visor as the heat expanded it the width of the visor. I added teeth to help the clip grip the visor after it…
I made these teeth for a feline fursuit head base. They were made to be printed with TPU filament. Print with supports. https://www.youtube.com/shorts/yhy0Zt3w8mk I use them in this fursuit head base:
My kids wanted some storage for their precious milk teeth, so here you have it. It is internally divided to four sectors, to keep track which jaw that tooth belongs to. Kids love it. And it is probably the one thing they tend themselves…
Simple Miata teeth that doesn't require any additional hardware or adhesive. Slide it right in place and use the stock bumper attachment to secure it. (see pic. 2) Print in one solid piece without any supports. The only post processing…
These teeth were originally made for a fursuit head (for a cartoon character that has only front teeth).
12 tooth gear. inner diameter 5 outer diameter 13.5
I usually do not print teeth for my costumes - I prefer to sculpt them by hand with Polymorph. Resize as needed. Category: Costume
Accurate copy of lego technic 24 teeths gear. Has to be printed with small nozzle. I used 0,25 mm nozzle which works just fine. I think 0,3 or 0,2 mm nozzle will be also good.
Normally after you catch a fish, you hold it up by the lower lip while you remove the hook and pose for pictures of your big catch. When you're out fishing for predatory fish, like big ocean fish, you need to wear gloves or use a tool…
This chip clip design uses an actual 3D scan of a set of teeth for the jaws. The clip assembly is 100% 3D printed, the spring clip needs to be printed twice (1 for each side). The spring clips slide into the grooves on the jaw and roof,…
Prints really nice. My tip is to use hot melt glue set on High Temp to glue these in. With PLA the heat from the glue softens the PLA on the gums to give a great fitment for the teeth. I think the bridging could use some support so I…
I was inspired by the " Dental guard box " by KeepTheBOX , however I wanted a few changes so I redesigned one from scratch. Main differences: This one is smaller, has shorter bridges in the hinge, no filet on the underside, thicker…
zähne für einen kürbis zum ankleben oder für anderes
It is used as a tool to show toddlers how to brush their teeth. You'll only need a M3 nut and bolt to assemble. I recommend using PETG or stronger
This model is compatible with the lego system.
This model is compatible with the lego system.
Large scale adult tooth models for teaching dental morphology. One file is half upper and half lower right side arches (clumped to get maximum prints on a bed), the second is the full set. These models have been created by scanning model…
what your mini 13 is truly hiding! so tell me witch one is your favorite?
3d model for printable spur gear compatible with lego shafts + some additional features this is printer friendly version not tested yet please give it a try, write a comment, post a build so I can make adjustments for the shaft clearance…
For all awesome photos, makes, reviews and more visit original source links. DaveMakesStuff description on thangs.com: “Hey, if you’re in the neighbourhood drop by for a… CUP OF TEETH!!!! WHOA HA HA HA!” Teeth cup and saucer are linked in…
I really liked the look with the tooth on top of the original thing, but I wanted just one big room inside and a bit of a texture on the outside. This is the result. EDIT 19.09.2022: Added top parts with a more loose tolerance on thread…
Tisk PLA. Všechny tři části musí být umístěny dle návodu do držáku dle foto (jako v originálu). Model zahrnuje pouze tři nové úchyty, nikoliv celý držák!!! Zelený výtisk je originální verze, bílý výtisk je s dlouhými zuby.
Updates: Halloween 2024: Added some more parts, a spider, bat, and owl . Description: A fun set of pumpkin decorations, mainly teeth. Notes: This is an initial design with no prior testing. While everything worked, the barbed spikes used…
I was really struggling to understand gear, gear-ratios, rotational direction so I decided to start creating some gears to play with. I was initially going for the Lego route but decided it was far more cost efficient to make them myself.…
3d model for printable spur gear compatible with lego shafts this is printer friendly version not tested yet please give it a try, write a comment, post a build so I can make adjustments for the shaft clearance if necessary because it is…
I made this remix of the butterfly comb because I heard that a comb with wider teeth and the teeth further from eachother was better for your hair.
you need 4 hidden 10mm x 2 mm round magnet to keep the box closed add a pause (M0) to insert a magnet with a little glue to prevent the magnet from sticking to the printer
Nombre del Archivo STL: "EngranajeGT2_6mm_20Dientes.stl" Este engranaje GT2 de 6 mm con 20 dientes ha sido diseñado para ser compatible con motores Nema17 básicos, comúnmente utilizados en impresoras 3D y otros sistemas de…
Basically a regular planetary or epicyclic gear, but with a novel approach in toothshape. The Background is, that regular 3D printer are working much more precisely when using round instead of sharp edges for a tooth shape. Perhaps even…
Perfect for Halloween! Fast and easy to print, doesn't require supports.
This remake is intended for the smaller rolls of plastic wrap that you get in a supermarket with flimsy cardboard. A handy holder for your plastic wrap, perfect for keeping your kitchen or pantry organized, especially if the cardboard box…
Kids broke train drive gear so I modeled it in Tinkercad and fixed it. Fits very snuggly. Printed in PLA 0.15 layer height and 100%.
This model is compatible with the lego system.
teethBrushed The clean, edged curves give your bathroom a new and fresh expression. Perfect for the entire family. Daily teeth cleaning can be complete with our integrated floss stick section. Sometimes the smallest changes can make a big…
Standard Lego Compatible Gear (24 teeth) for 2mm diameter shaft. This gear has a thickness of 4.5mm, however as the cad and dxf files are included, the user can modify this using a cad program.
a 3d printed mandible model
Found this but saw that the teeth failed added some supports just in his mouth. Will print later and update results. Edit: Had to change XY compensation to 0.1 (Prusa Slicer) as the supports wouldn't appear in the slicer. Print Settings…
I created this gear to hopefully make gear ratios easier to play with. Im currently printing it at slightly larger size to see if it will fit better with the original pieces. Either the piece is slightly small, my printer is slightly out…
It's a pretty small bead I would recommend printing on a resin printer to get the most detail. It could be scaled up and printed on an fdm with the smallest possible layer height but I haven't tried it.
It looks like Thingiverse has problems with the "Download all Files" button. If it doesn't work, download the individual files. This function still works We all love additive manufacturing (aka 3d printing) because it creates so little…
Upper and Lower Teeth morphology study models. Printed in sections for easy reference and handling. Can be rescaled to your liking.
This model is compatible with the lego system.
The original teeth are a pain to print. This remix gives the teeth more contact for first layer to achieve a better print.
For all friends of the gt2 belt: 70 and 76 teeth gears fit the axle and the Tamiya rim.
Printing this model may pose a challenge due to its lack of flat surfaces to lay on the print bed. Orient it with the teeth facing upwards and enable supports. Recently, I visited the dentist, and they scanned my teeth to create a 3D…
Support arm with better teeth shapes for Prusa Enclosure V2, fits in all positions, even in the lowest position.
HTD 3M 20 teeth pulley, toothed portion height - 14mm, inner hole - 8mm, base diameter - 26mm, base height - 10mm
10 teeth gears, all the model are identical, you can print the exact copy of the original with supports but for better strenght I recommend using one of the other two. If the gear look not to fit take some hot air and put it in the shaft…
This was modelled after some left over shark teeth tool organiser. I needed a few more teeth to organise all my spanners and after cutting the main pieces to size I had a couple of teeth but still had 9 spanners without a holder so I made…
I was really struggling to understand gear, gear-ratios, rotational direction so I decided to start creating some gears to play with. I was initially going for the Lego route but decided it was far more cost efficient to make them myself.…
Can be printed with PLA and 0.6 nozzle with 0.3mm layer. Or anything else. Emblem and top part are not modified.
this is a super great and real model of teeth that was scanned print the top then the bottom
I was in need of an extension to the gear on my Strandbeest in order to get the vanes far enough from the gears at the front that it would spin freely
Teeth cookies cutter, I made this cookie cutter for dentists, we had a Christmas party with them, they really liked it
This model is compatible with the lego system.
Give your Otamatone some teeth with this simple 3D print! This is designed to fit on all classic-sized Otamatones.
Print with the front of the tooth down on the plate. I just printed these in PLA and they have held up great.
I was really struggling to understand gear, gear-ratios, rotational direction so I decided to start creating some gears to play with. I was initially going for the Lego route but decided it was far more cost efficient to make them myself.…
3 Cogwheels with various teeth number - module 3 (pitch 9.42mm) to be optionally used in combination with rack and sprocket https://www.printables.com/model/1266062-rack-and-pinion-module-3 Printed with Flashforge Adventurer 5M Pro…
It looks like Thingiverse has problems with the "Download all Files" button. If it doesn't work, download the individual files. This function still works We all love additive manufacturing (aka 3d printing) because it creates so little…
I was really struggling to understand gear, gear-ratios, rotational direction so I decided to start creating some gears to play with. I was initially going for the Lego route but decided it was far more cost efficient to make them myself.…
A beautiful skull, really. I hope to make a life-size version of this soon, but will also probably print out a scaled down version just like this. I’d be happy to answer any questions!!
