1,751 models
The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
You can see in the pictures how to set it up. I used used seven 3,0mm x 16mm wood screws. The G-Code is made for Filamentum PLA. If you want to slice it yourself, make sure to set “Loops” at the “Skirt” settings to 0. The print needs the…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Created this simple to print and use ESC Mount for the Rlaarlo Omni Terminator Mini 1/10 truck. Allows use of both double sided tape and zip ties - mounting to a rigid structure that uses stock screws.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I really liked @episco 's OLED terminal but didn't wand to glue the OLED into the frame so I came up with this little clip to hold it in place. To install it, just put the OLED display and the the clip in place and push the clip down. Due…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Nakładka na hak o kuli średnicy 50 mm. Nakładka jest blokowana zapięciem z gwintem dokręcanym kluczem w zestawie. Gdyby wygięcie haka było zbyt ostre, należy skrócić klucz, by móc dokręcić zacisk. Hook cover with a ball diameter of 50 mm.…
Print approx. €19.87–€24.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a storage solution for the Nemesis basegame, the aftermath expannsion and the medic character. Everything fits in the core box premium sleeved with no lid lifting. If the “untold stories” book is included there is a small lid…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Praktische Box für den Kräuterschrank in der Küche um übersichtlich und platzsparend Salatmischungstüten (Knorr oder andere) aufzubewahren. Das Modell kann stehend ohne Supports gedruckt werden. Die herausstehenden Buchstaben können bei…
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant
Wrzucać na drukarkę i po wydrukowaniu korzystać :)
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Einfache Halterung für Cuttermesser und/oder Ersatzklingen. Ich habe mehrere Modelle abgelegt. Man benötigt noch 2 Schrauben der Größe 3,5 mm zur Befestigung. Simple holder for cutter knives and/or spare blades. I have put down several…
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
A basic case for Arduino Mega + BTE16-06 screw terminal blocks.
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for PETGSource material: PET
Description Digital File to DIY 3D print a Wall or VESA Mount for Technicolor Xi6 (Videotron Helix) TV Terminal. Model match terminal design line. The mount can be screw to wall or at the rear of TV using VESA 50x50 or VESA 75x35 holes.…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
Termomix TM31 cup My original mug fell and cracked. So I decided to make a similar model with the same dimensions.
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Hole radius 6mm (Otvor o průměru 6mm)
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Simple case for AI on the edge watermeter using ESP32Cam. See documentation . I fixed the baseplate with double-sided tape on top of the watermeter.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Terminal in the Form of Garuda, 12th-13th C CE Fixed for 3d Printing with Added UV texturing to include details. Two Versions. One version to scale up to fit your own staff. (you will need to add your own boolean difference) Another…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
One of the stand's of a old Termomix TM21 Print Settings Printer Brand: Creality Printer: Ender 3 S1 Rafts: No Supports: No Resolution: .02 Filament: PLA
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This file contains the threaded insert that is used to adjust the extender leg terminator. It is necessary to insert an M6 screw inside to ensure the sturdiness
Print approx. €193.34–€236.31 excl. taxPreliminary estimate for one variant
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Designed plastic parts to replace the cheesy terminal posts on my Astron SS-50M power supply. One of the setscrews (or its threaded socket) is stripped. So I used OpenCAD to design plastic parts for a traditional 3/16” bolt lug nut…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Introducing the Game Changer in Winter Car Maintenance! Say Goodbye to Manual Scraping with our Electric Ice Scraper. Are you tired of waking up early to battle the frosty windshields? Have you struggled with traditional ice scrapers that…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
Kryt terminálu s živým napětím pro zdroje MeanWell řady RD s terminálem se šesti pozicemi.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
The models of the letters Y and I are ideal for children who are learning to recognize and pronounce the letters of the alphabet. The model is designed to be visually appealing and interactive, encouraging children's imagination and…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Intermediate piece for karcher WD 4 Premium and Bosch PMF 180 E. It wil mayby also work with a different vacuum cleaner or multi tool. The smooth one is les stong than the one with edges.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Maximize your filament storage with this custom-designed intermediate support base tailored for the IKEA SKÅDIS pegboard system. This support base allows you to hold multiple spools at once, providing easy access and efficient storage.…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Remix of https://www.thingiverse.com/thing:1850850 I removed that weird looking deformation on his right cheek and ran a mesh repair on it, works great and looks better now. v2: I noticed the feet weren't flat on the plate surface, fixed…
This is a custom take on Dummy 13 with a Terminator-style twist. I really think Dummy 13 is perfect to make robots, so here's the most post-apocalyptic, gritty, scary robot out there. Have fun with it ! I used some modified parts of…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
I wanted a good DIN Mount for my Shelly Switches to mount them properly into my electrical box, but all that i found did not really satisfy me. So i made my own inspired by severel other designs with these key features: vertical…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7
A Zbrush sculpt from the first Terminator movie. I provide the parts at the size i printed them, but if you want to save some printing time, please feel free to scale them down a little. To get the best out of these i would split the base…
Remixed version of the Terminator skull
First of all. Thank you nracmo ( https://www.thingiverse.com/nracmo/about ) for the design! I have cleaned up a couple of parts, redesigned some of them to fit my need and raised the resolution. Further more i have designed a stand for…
WORK IN PROGRESS First, I want to thank 86duino the original author for his excellent work, we can find it on cults and thingiverse . I really like the work done but the watermark completely “distorts” Mario...so I made the following…
T800 taken from many components here on thingyvers. I decided to whip up a T800 bust for a mates birthday. Then I got carried away and designed these make shift shoulders, then I couldnt help myself again and added some hands and so on.…
Similiar to MetalheadPrinting's “ Gengar (no watermark) ”, this is a clean version of Anthonylu's Gengar model they made on thingiverse . However my version still offers the three piece print assembly and the detailing on the eye and…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
40' HO scale shipping containers. Contains High-cube and normal height containers. Contains a version that has holes in the bottom to insert weights (3/8-16 hex nuts) for better operation on well cars. Use the weighted container as the…
Battery terminal for Makita battery 18V. Designed to fit the battery mount by GPlatek https://www.thingiverse.com/thing:352094 Redesigned / Remixed from https://www.thingiverse.com/thing:863257 so that it is much easier to create the…
This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…
Optional parts for Thumper (Click on files to see visual 3D files) Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing. STL files have a Prefix letter. All parts for each set are marked with the same prefix…
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
This is my design of the T-800 CPU as seen on the Terminator 2 (extended edition) movie, specifically the scene where they decide to re-programme the T-800. If you like this design, please give it a like and follow my Instagram page to…
Under body protection for the Omni Terminator from Rlaarlo. You can re-use the stock bolts. You have 2 options. The full ski protection or the just the sides plates (L and R). Recommended ABS/ASA, but works just fine in PLA. If you use…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.
Llavero de mate y termo. La bombilla es un pedacito de filamento.
I wanted to challenge myself with this CAD design and see if I could make a roll cage for my RC. The roll cage needs to be printed with some impact resistant material. I happily share this model for free, but it took me quite some time to…
Terminator Arnold Head for Dummy13/Lucky 13
This is a custom battery terminal for fablab.ee's Makita 18V battery adapter. This is designed to be used with 6,3mm blade connectors (red, blue). Just crimp on the cable and push it through the hole in the terminal. My print is a…
40' Smooth Sided Intermodal Well Cars used for transporting shipping containers across the United States. Parts can be printed using resin or FDM. The files contain sets for either a 1, 3, or 5 car string. Cars are already sliced to…
ALIX NOZZLE DUCT CONFLICTS WITH STOCK BUILD PLATE HANDLE. IF YOU WANT TO USE IT PLEASE REMOVE THE HANDLE. Fan goes into the same spot as the original model. Screws seemed unnecessary since the friction fit is already pretty good. Make…
ENGLISH description: Terminator t-800 Arnold Schwarzenegger figure model. Ready for painting and scaled up to maximum height for my Prusa MK3. (ca 20cm tall) Printing instructions: ■ Steel sheet ➔ at your own preference (textured PEI for…
I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…
Star Trek - The Next Generation Desktop Computer Terminal In an effort to create a small Raspberry PI based desktop computer for things like time logging, I got inspired by the iconic design of the computer props in many Next Generation…
The fictional T-800 memorial coin I designed for #3Dprinting (mostly resin) Can be printed on FDM too, but for the best results resin printer recommended.
Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…
Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.
Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por: •…
This is a bracket to mount a HEPA filter to the Creality K1 and K1C at the rear fan exhaust. I take the cheap Levoit LV-H128-RF. You can get it on Amazon and Aliexpress.
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
This is an enlarged version of this model with LED eyes. Here are the settings I used to print this model : Printer: Bambu Lab X1 Carbon Cool plate Sunlu Black PLA HATCHBOX PLA Transparent Red 0.20mm Standard@BBL X1C Generic PLA Quality…
This is a press fit cover for a battery m8 hex screw terminal. I designed it to replace the small included covers on my RV battery that didn't adequately cover the wire lugs. I printed in PETG to protect from heat, and printed in both red…
Since the Shelly EM has slightly different dimensions, I created this remix.
Check out the following video for the trick i used to easily engrave any design on this print-in-place hand fan. ▶ Leave a comment if you would like me to also upload the .BLEND file so you can try making your own hand fan designs. 😉…
The T800 ring ! Res 0.2 Print it as provided, with supports enabled (not much generated) for solidity and details. Pictures provided was made in 0.1 layers, Iam about to test a 0.05 with 0.2 nozzle. Ring size is 68mm in circumference,…
Pete, very kindly skulpted these pulse rifle files to go with my full size T800 build and during our discussions I mistakenly gave him the wrong measurements. Old saying measure twice cut once. Well did I do that, No : ) I was so excited.…
Recommend using a brim. STL is already oriented ready to print.
Der Getränkedosenhalter ist eine beeindruckende Mischung aus Schädelkunst und futuristisch-mechanischem Design – fast so, als hätten ein Bildhauer und ein Sci-Fi-Konzeptkünstler gemeinsam an einem düsteren Kunstwerk gearbeitet. Form und…
This is fan shroud modeled according to the stock shroud on the X1/X1C. You have the following options on which shroud to print: A. Stock Configuration This is the version you need to download if you're replacing a broken stock fan…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
I wanted the “stock look” and the mounting schemes provided by the manufacturer of the aftermarket speaker did not fit the tri-lobe stock mounting scheme and I did not want to drill permanent holes in my door. This was designed for the…
LRS-350-24 Terminal Cover - Voron Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. It even lets you more safely tweak the voltage adjustment without fear of tapping a hot terminal. Print it however you like.…
This design allows you to attach an Arduino Nano through the popular Deek-Robot Nano Terminal Adapter in a more robust fashion to your projects. It allows a pretty degree of stability in front of movements and vibrations with 4 attachment…
This is a DIN rail adapter for an Arduino Nano Screw Terminal. Used Terminal Adapter: Terminal Adapter You also need some M3 spacers/nuts/screws: M3 Screws
When looking for a storage container, that seemed rugged for cold storage of my peptides it proved best to remix and come up with my own. If storing in the freezer, I would recommend using PETG as it is great down to about -40*. Hinges…
This is a small wiring terminal endstop, to keep them straight, and also doesnt let them slide around. It utilises two screws instead of an angled one.. The screws are self tapping into the plactic. The endstop can be simply snapped onto…
Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…
Gear knob Terminator T800 skull Lever hole diameter 12 mm Software: PrusaSlicer 2.7.1 Infill : 10% Brim : YES Skirt : No Support : YES Perimeters : 4 Top/Button : 4 Layer height: 0.2 mm Material : ABS If you print this accesories please…
Terminal Halter für Wago Klemmen im 2x design für 12V/24V Verkabelung. Da ich nur Stehende Exemplare gefunden habe hier mal eine flache, liegende Variante. Die Halter sind recht eng in der Toleranz und klemmen bei mir recht gut, ist es…
I'm delighted to share with you a refined version of the Terminator T-800 bust, originally posted by machina on August 23, 2014. This remix brings the iconic model to life by adding intricate details using three primary colors. The…
V2: Remixed David's newer chain since I was having sag problems. Remodeled it and raised it up by 8mm. STL is already in correct print orientation.
A Terminator T-800 CPU Stand as it is seen in the movie at Cyberdyne Systems. I modelled it for friend which completed the print, just print the side parts twice, some kind of metal (like a cut knitting needle etc) is needed to hold the…
Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…
There are a lot of CPU chips to print but none of the 'broken' ones were quite good enough for my project of displaying it under a glass dome much like the terminator arm. This is my take on the broken CPU chip as movie accurate as I…
Adapted for the MRD068A ESP-32 Screw Terminal adapter. Hole spacing is 60mm. Need to print 2x ESP32-Terminal-DIN-Mount.stl
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Almost a direct copy of the remix source, but I added solids under the floating keyboards to make it printable. Category: Toy & Game Accessories
Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…
watermelon croc charm Category: Fashion
I needed a low-profile 90 degree cable cover for the Mk3 that would allow it to fit in an Ikea STUVA cabinet. I couldn't find one that worked and accommodated ring terminals, so I designed one, instead. Perfect fit using 90 deg. terminals…
