Search results: terminal

Sort order

723 models

P
PrintablesREMLURELMI

9V Battery Terminal Protector

Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No

Downloads
398
Likes
106
Rating
5
P
PrintablesNotrial

Meanwell LRS 75 Simple Terminal Cover

Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…

Downloads
380
Likes
45
Rating
5
P
PrintablesZach

WAGO 2009-115, terminal block markings, WMB

Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…

Downloads
206
Likes
35
Rating
5
P
Printablespaulwuertz

Housing for four Sub-D / DE9 terminals for a CAN bus hub

Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…

Downloads
35
Likes
2
Rating
0
P
PrintablesNicholas Tupper

KDFW Terminal Area (Scaled to Testing Supplement)

A 3d Representation of the KDFW Terminal Area for use as a Teaching Aid for Flight Instructors! Scaled laterally to match the scale found in the FAA Private Pilot Testing Supplement (IMPORTANT: NOT SCALED TO MATCH A STANDARD SECTIONAL…

Downloads
28
Likes
2
Rating
0
P
PrintablesBrian Walczak

Adjustable Payment Terminal Stand/Mount for Countertop

This model is a fully adjustable counter mount designed for payment terminals and similar devices. It features a 310° base rotation and uses a friction tilt hinge, allowing you to tilt your device at any angle - just tighten or loosen a…

Downloads
20
Likes
0
Rating
0
P
PrintablesM

Giesse Adjustable Terminal 02167 "French Door Locking Pin"

French Door locking pin Manufacture/mode: Giesse 02167 Notes: Used as the top & bottom locking pins for French doors, swing doors, typically exterior doors. You may see this part in Eurotech French Doors. 3D Print Notes: - Material Type:…

Downloads
18
Likes
1
Rating
0
P
Printableskaje

Motor Terminal Cover - Westinghouse CAH

It is unlikely that this print will ever be needed by anyone else (but you never know). Mostly I am posting this here as an example which may be instructive to people who need to make an odd shaped part. As the photos show, this part is…

Downloads
15
Likes
2
Rating
0
P
PrintablesMarc Neuhaus

Shelly DIN Mount with Wago 221 Terminals

I wanted a good DIN Mount for my Shelly Switches to mount them properly into my electrical box, but all that i found did not really satisfy me. So i made my own inspired by severel other designs with these key features: vertical…

Downloads
5,683
Likes
703
Rating
5
P
Printablesepisco

Terminal for SSD1306 1.3" OLED and Wemos D1 Mini *NEW* Double Screen

Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…

Downloads
1,990
Likes
261
Rating
4.94
P
PrintablesQincon

WAGO terminal mount 221-415

The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…

Downloads
1,770
Likes
271
Rating
5
P
Printablesdenniseagles

Makita Battery Terminal

Battery terminal for Makita battery 18V. Designed to fit the battery mount by GPlatek https://www.thingiverse.com/thing:352094 Redesigned / Remixed from https://www.thingiverse.com/thing:863257 so that it is much easier to create the…

Downloads
1,596
Likes
216
Rating
5
P
PrintablesMarin

PARKSIDE X20V_Team Battery connector with Faston terminal

Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…

Downloads
1,286
Likes
168
Rating
4.6
P
PrintablesNeoRame

Terminal for SSD1306 0.96" OLED and Wemos D1 Mini

I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…

Downloads
1,141
Likes
152
Rating
5
P
Printablesaxel

battery terminal for Makita 18V battery adapter REMIX

This is a custom battery terminal for fablab.ee's Makita 18V battery adapter. This is designed to be used with 6,3mm blade connectors (red, blue). Just crimp on the cable and push it through the hole in the terminal. My print is a…

Downloads
991
Likes
102
Rating
5
P
PrintablesDaniel

Star Trek TNG Computer Terminal

Star Trek - The Next Generation Desktop Computer Terminal In an effort to create a small Raspberry PI based desktop computer for things like time logging, I got inspired by the iconic design of the computer props in many Next Generation…

Downloads
831
Likes
236
Rating
5
P
PrintablesAuroraProjects

Battery Terminal Clip on Covers for lifepo4 280ah cells

Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.

Downloads
743
Likes
56
Rating
5
P
PrintablesSOLNEZ

Porta Fusible Automotriz para Terminal Aislada

Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por: •…

Downloads
742
Likes
238
Rating
5
P
PrintablesMuffelkraft

Improved Makita LXT 18V Battery Terminal (643852-2)

This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…

Downloads
725
Likes
77
Rating
5
P
PrintablesRedKB

Battery Terminal Cover - Press Fit for M8 Hex Screw

This is a press fit cover for a battery m8 hex screw terminal. I designed it to replace the small included covers on my RV battery that didn't adequately cover the wire lugs. I printed in PETG to protect from heat, and printed in both red…

Downloads
698
Likes
63
Rating
5
P
PrintablesDeluxeBabble

Shelly EM DIN Mount with Wago 221 Terminals

Since the Shelly EM has slightly different dimensions, I created this remix.

Downloads
660
Likes
61
Rating
5
P
PrintablesRobotRogue

LRS-350-24 Terminal Cover - Voron Edition

LRS-350-24 Terminal Cover - Voron Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. It even lets you more safely tweak the voltage adjustment without fear of tapping a hot terminal. Print it however you like.…

Downloads
574
Likes
65
Rating
4
P
PrintablesJAPOLabs

Arduino Nano Terminal Adapter

This design allows you to attach an Arduino Nano through the popular Deek-Robot Nano Terminal Adapter in a more robust fashion to your projects. It allows a pretty degree of stability in front of movements and vibrations with 4 attachment…

Downloads
562
Likes
65
Rating
4.5
P
PrintablesMadHulk

Arduino Nano Screw Terminal DIN Rail mount

This is a DIN rail adapter for an Arduino Nano Screw Terminal. Used Terminal Adapter: Terminal Adapter You also need some M3 spacers/nuts/screws: M3 Screws

Downloads
551
Likes
58
Rating
5
P
PrintablesR&D

DIN rail terminal endstop

This is a small wiring terminal endstop, to keep them straight, and also doesnt let them slide around. It utilises two screws instead of an angled one.. The screws are self tapping into the plactic. The endstop can be simply snapped onto…

Downloads
543
Likes
41
Rating
5
P
PrintablesOurAngryBadger

Battery Terminal Covers for M8 LiFePO4 Batteries

Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…

Downloads
539
Likes
33
Rating
4.8
P
PrintablesRumbledoc

Wago 221-41X Terminal 2x2 2x3 2x5

Terminal Halter für Wago Klemmen im 2x design für 12V/24V Verkabelung. Da ich nur Stehende Exemplare gefunden habe hier mal eine flache, liegende Variante. Die Halter sind recht eng in der Toleranz und klemmen bei mir recht gut, ist es…

Downloads
516
Likes
36
Rating
5
P
PrintablesMakeseum

ESP32 Screw Terminal Adapter DIN Mount MRD068A

Adapted for the MRD068A ESP-32 Screw Terminal adapter. Hole spacing is 60mm. Need to print 2x ESP32-Terminal-DIN-Mount.stl

Downloads
490
Likes
34
Rating
5
P

Terminal for SSD1106 1.3'' OLED and NodeMCU v3 ESP8266, without soldering

This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…

Downloads
483
Likes
47
Rating
0
P
PrintablesAndré

Computer terminal for Nemesis

Almost a direct copy of the remix source, but I added solids under the floating keyboards to make it printable. Category: Toy & Game Accessories

Downloads
467
Likes
39
Rating
5
P
Printablesps915

Eve LiFePo4 LF304 Terminal Cover

Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…

Downloads
466
Likes
48
Rating
5
P
PrintablesGrubbyZebra

Prusa Mk3 Ring Terminal 90 Deg Heatbed Cable Cover

I needed a low-profile 90 degree cable cover for the Mk3 that would allow it to fit in an Ikea STUVA cabinet. I couldn't find one that worked and accommodated ring terminals, so I designed one, instead. Perfect fit using 90 deg. terminals…

Downloads
459
Likes
85
Rating
4.75
P
Printableshuskyte

Terminal Block for solar installation (with Mega fuse)

A self designed terminal block for your solar installation. It was designed to fit a mega fuse as well. It also can be used as a single terminal without fuse. The cover prevents accidantial discharges. All you need is 2 M8x25 plus 4 M8…

Downloads
458
Likes
62
Rating
4.33

small cover for Meanwell LRS and RSP series power supply terminals

A small cover for the wiring terminals of the Meanwell RSP-320 power supply. Edit 08-2022: Thanks nosstromOS for confirming the compatibility with the LRS-200 power supply. Thanks Keith Chong for confirming the compatibility with the…

Downloads
450
Likes
37
Rating
4.78
P
PrintablesPrintercat64

Ender 3 v2 PSU 120mm fan and wire terminal cover

Remixed to keep everything cool and quiet. Modeled for the be quiet! Pure Wings 2 fan, but should work with other 120mm fans as well. Overkill for sure, but I already had these fans on hand from an old PC build. note. Due to the extra…

Downloads
439
Likes
63
Rating
5

Prusa Lack Enclosure Heatbed Cable Clamp - 60 Degree, for Screw Terminal Heatbed and Textile

I saw several versions of this cable clamp that reduces the overall functional depth of the Prusa printers to be able to fit inside a Lack enclosure. However, many of the existing versions were made prior to the switch to screw-terminal…

Downloads
410
Likes
35
Rating
4.43
P
PrintablesAntimaterie

victron shunt terminal cap

in addition to my cover of the shunt https://www.printables.com/model/255704-cover-for-victron-shunt I created a cover of the terminals of the shunt. print instructions variable/adaptive layer height is nice to make rounded edges look…

Downloads
406
Likes
45
Rating
0
P
PrintablesJermyn

Shelly 1 Gen 4 DIN Mount with Wago 221 Terminals and I/O Labels

Remix to suit Shelly 1 Gen 4 and changed the Labels to I and O

Downloads
399
Likes
22
Rating
5
P
PrintablesRobotRogue

LRS-350-24 Terminal Cover - Voron Switchwire BOM Compatible Edition

LRS-350-24 Terminal Cover - Voron Switchwire BOM Compatible Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. This is an updated version for anyone building a BOM Voron Switchwire, added notches to allow the…

Downloads
398
Likes
87
Rating
4.25

Positive Terminal Base Cover (E46,E83) for BMW

Mine got lost, so I decided to make one! Print in PETG or other heat resistant filament. BMW (E46 3 Series (not M3), E83 X3) Battery Positive Terminal Base B + - Cover Cap (61138385158) Category: Automotive

Downloads
381
Likes
68
Rating
5
P
PrintablesAdmiralSym

Note10+ Slider Terminal Case

This is a Bluetooth sliding keyboard case for the Samsung Note10+. This is the first complete iteration of this design, but it still requires a decent amount of refinement to be where I'd want it. Issues/Action Items: The keyboard bezel…

Downloads
379
Likes
70
Rating
0
P
PrintablesFarnsworth

WEHO LRS-250m DIN rail mount and terminal cover

DIN rail mount and terminal cover for the WEHO LRS-250 PSU. (might fit other models, Meanwell LRS-200 series seems to have the same dimensions). Terminal cover can be opened without tools. Prints without supports. Printed in PETG at layer…

Downloads
376
Likes
36
Rating
4.75
P
Printablesnotyahc67

Nikon Flash PC Sync Terminal Cap for F F2 F3 F4 F5 FA FG FE2 FM2 F100

I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…

Downloads
367
Likes
33
Rating
5
P
Printablessteve

Display clip for OLED terminal

I really liked @episco 's OLED terminal but didn't wand to glue the OLED into the frame so I came up with this little clip to hold it in place. To install it, just put the OLED display and the the clip in place and push the clip down. Due…

Downloads
358
Likes
33
Rating
5
P
Printablesloicloic

Voron V0/V0.1 Mean Well PSU Terminals Cover

Simple Terminals Cover for the V0/V0.1 Mean Well LRS-100-24 or LRS-150-24 PSU. STEP file provided if you'd like to tweak it. Below the requirements and settings, settings are from the Voron Manual, a bit overkill for this but at least you…

Downloads
355
Likes
73
Rating
5
P
PrintablesSam

Terminal Adapter for 12V 7Ah Battery Type

This is an insulating terminal adapter for a 151x65x93mm SLA battery. For my hobby applications I wanted to have a safe connection to avoid unintentional shortcuts and additionally have an integrated fuse directly at the battery terminal.…

Downloads
348
Likes
75
Rating
5
P
PrintablesReeDoet3D

Mean Well LRS-350 PSU Terminal (Contacts) guard

The terminals on the Mean Well LRS-350 series PSU are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.…

Downloads
347
Likes
34
Rating
5
P
PrintablesKPV

Car Battery Terminal Cover

Battery terminal covers to suit the Halfords brand of battery terminals. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Notes: Print with the opening facing upwards. Category: R/C Vehicles

Downloads
338
Likes
56
Rating
3

Fallout Factory Terminal Holo Scope Full Sized Prop

Here is my latest make - the Fallout Factory Terminal (Holoscope) Full Size Prop. If the artist(s) who designed this ever come(s) across this make, I just want to say thank you very much for imagining this beautiful design. There was so…

Downloads
329
Likes
234
Rating
5
P
PrintablesJARKE

Worx Landroid terminal cover

I got an extra used charging station for my Worx Landriod, but the terminal cover was missing. I designed a new one myself, based on the one from the original charging station I have. I did not make the finger thing, to make it more…

Downloads
314
Likes
20
Rating
0
P
PrintablesChris Borge

The Terminal Watch (Casio mod)

To make this model, you will need -A casio f-91W watch -7 m1.6*4mm screws (Sometimes called glasses screws) -The printed components And a sheet of .5mm PETG plastic (found commonly at hobby shops) A STEP file is included if you wish to…

Downloads
312
Likes
158
Rating
0
P
PrintablesRaschmaschine

Terminal Block / Wire Connector ( Feat. optional cable relief and bridging )

I wanted to have nice connectors for the extension of my MK3's PSU cables without having to tear down the entire cable harness. Since there were no proper screwing terminal blocks available out there, I did it maker style and designed my…

Downloads
301
Likes
59
Rating
5
P
PrintablesGonun

Junction box with WAGO 222-415 terminal blocks

A relative had this contraption with two lamps and wanted to hide the WAGO terminal blocks: So I designed a simple, wall or ceiling-mounted junction box to split the two-pole 6mm x 3mm cable into two. It has a strain relief for all three…

Downloads
301
Likes
73
Rating
0
P
Printablestopcio

Covers for gel and AGM battery terminals M8

Small covers for gel and AGM battery terminals - M8 screws The covers fit onto the M8 screws quite tightly, but that's how it's supposed to be. Small latches on the wire side also prevent the cover from slipping out. The 3mf file is from…

Downloads
299
Likes
133
Rating
0
P
PrintablesMartin B.

DIN rail mount for wago clone lever terminal blocks

There are clones of the WAGO lever action terminal blocks on AliBaba, Amazon, and other stores that have a different mounting system. In order to mount these on a DIN rail, you will need this “push to lock” style mount. Print at .2 to .3…

Downloads
296
Likes
53
Rating
3.5
P
PrintablesMattia Fiorini

AAA battery case / holder / box for bambulab battery terminals PH 2.0 connectors

AAA battery holder / box for bambulab maker's supply battery terminals PH2.0 connectors https://eu.store.bambulab.com/en-it/products/aaa-battery-spring-contact-plate-with-ph2-0-connector?_pos=2&_sid=203a2ee1f&_ss=r ***PLEASE POST A PHOTO…

Downloads
296
Likes
100
Rating
0
P
PrintablesDavid Holecko

WAGO - terminal block 221-413

Terminal block assembly for an electrical junction box using WAGO 221-413 lever-nuts (3-conductor spring connector). Provides safe and reliable connection for electrical wires within the enclosure. Suitable for quick and tool-free wiring.

Downloads
292
Likes
218
Rating
0
P
PrintablesShihchiun

2x1 Gridfinity 4x 9V Battery Holder - Terminals Down

The interior walls are very thin and may appear to slice with gaps if you're using a 0.6 mm+ nozzle. Printed okay and does the job.

Downloads
287
Likes
23
Rating
5
P
PrintablesRob Latour

Battery Terminal Cover for M8 hex nut terminals - LiFePO4 batteries

IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…

Downloads
286
Likes
27
Rating
0
P
PrintablesRob

LRS-350-24 Terminal Cover - ZeroG Edition

Remixed to use the ZeroG project's logo instead of Voron. This should in theory work with other 115mm width PSUs provided they also have the same terminal spacing, etc. If you find one, let me know and I'll add here to help others find it…

Downloads
281
Likes
40
Rating
5
P
Printablesvolkhen

wall socket speaker cable terminals

Wall socket for speaker cable, needs two metal banana plug sockets with speaker whole. Best if you use gold-plated version. Dimensions: Rectangle - 80mm x 80mm Screws distance 62.25mm x 62.25mm Screw holes 4mm Outside diameter of the…

Downloads
281
Likes
44
Rating
4
P
PrintablesTom Oinn

2020/3030 Wago extrusion mounts for 2, 3, and 5, terminal blocks

A convenient way to attach wago 222-41x connectors to your printer's (or other) extrusion. Uses M6 hardware as that's what my Ratrig vcore uses everywhere, and allows for mounting of between 1 and 3 wago terminals with 2, 3, or 5,…

Downloads
280
Likes
39
Rating
5
P
PrintablesCedric Crawley

Speaker Terminal

Originally designed for my custom subwoofer enclosure. Wanted to hook up both voice coils to change impedance without removing sub from box. Also to wire each voice coil to separate amplifiers. Terminals are suitable for heavy gauge wire…

Downloads
273
Likes
20
Rating
0

12V Battery Terminal Covers, Positive & Negative (Remix)

Remix of models by Bill Skullman (bsr81) from Thingiverse. Extended and strengthened top and added "POS +" & "NEG -" labels along with a slight ridge to aid in removal. STL is arranged with the top “up”. Flip over and print “down” to…

Downloads
272
Likes
15
Rating
4.33
P
PrintablesKazmar

Terminal Block

Simple terminal block. You can add as many terminals as you like by copying and merging “Terminal_mono” (or by using patterns). Requires (Parts required per one terminal.) 1x : M3 Screws 7mm 1x : M3 Nut 2x : M3 Washer This model is for…

Downloads
270
Likes
56
Rating
5
P
PrintablesPavel Hrčiak

Makita terminal, 2 verze

Praktický díl pro vlastníky těchto baterii. Jsou přiložené dvě verze.

Downloads
260
Likes
36
Rating
5
P
PrintablesEldarHan

Speaker Terminal Cup - 64mm x 22mm (84mm x 24,5mm total)

Optimized for Dayton Audio BPP Binding Posts

Downloads
259
Likes
24
Rating
0
P
PrintablesEason

Auckland Airport Domestic Terminal Model

A model of the Auckland airport destometic terminal.

Downloads
257
Likes
12
Rating
5
P
PrintablesLoogle

Gaggia Boiler Terminal Shroud

Snap-on covers for TE 160783-7 (and other variants) boiler terminal connectors used in Gaggia espresso machines. Crimper Jaws are here: https://www.printables.com/model/673240 Materials: Nylon (PA12) has been tested. Ideal materials would…

Downloads
257
Likes
46
Rating
0
P
PrintablesJazzahn

ADM-3 Inspired Retro Computer Terminal

This is my homage to the ADM-3 terminal designed in Onshape. I designed it with a specific keyboard and screen in mind as listed in the parts list. The keyboard is held in with a brace secured by M3 screws, as is the screen. The rear…

Downloads
253
Likes
81
Rating
0
P
PrintablesTeachingTech

SSR terminal cover

A simple printed terminal cover for two different solid state relays. Beware of Fotek clones! Companion video here: https://youtu.be/1VyFejiKkSQ Category: Other

Downloads
250
Likes
55
Rating
5
P
PrintablesMidna Rinku

Pluggable Terminal Blocks 5.08 mm 2 pin (male and female)

I needed this for a project. STEP files included.

Downloads
245
Likes
9
Rating
0

NANO screw terminal bracket for din rail

A din rail bracket to attach a Arduino NANO and screw terminal board. The screw holes are M3. You will need to print one tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or…

Downloads
243
Likes
24
Rating
0
P
Printablesccc888

2007-2013 Nissan Battery Terminal Cover

Designed based on the dimensions of the original 2011 Nissan Altima battery terminal cover. Fits Altima, Maxima, Murano and Quest from 2007 to 2013. Printed and tested with PETG with 100% infill. Passed 300+ open and close fatigue test.…

Downloads
240
Likes
33
Rating
0
P
PrintablesDingo_aus

12V Battery Terminal Cover - POSITIVE

This print is designed to press fit onto a 12V car battery terminal to cover the exposed metal parts of the post to prevent accidental short circuits. This model allows for protection of N70T type posts which are often found on Deep Cycle…

Downloads
239
Likes
18
Rating
0
P
PrintablesCashandrick

ESP32 + Terminal adapter Box

Adapted for these models :https://fr.aliexpress.com/item/1005001636295529.html?spm=a2g0o.order_list.order_list_main.11.5

Downloads
238
Likes
15
Rating
5
P
PrintablesOutpost Kodelia

Meanwell LRS-100 Power Supply Terminal Cover - Single Screw

This is a small cover designed to cover the terminals of the LRS-100 power supply to prevent contact with fingers and tools when in use. (Confirmed on an LRS-100-5, but likely works with others as well.) This has been remixed so that the…

Downloads
235
Likes
15
Rating
4.5
P
PrintablesvagueDirector

Terminal cover / bracket for 75Ah 90Ah and 105Ah LiFePO4 Cells

These caps are a copy of a design by another company, which made these using an injection moulded process. They fit cells with top dimensions 130x36mm. This includes 75Ah, 90Ah, 105Ah cells and probably more. These LiFePO4 cells are…

Downloads
232
Likes
22
Rating
0

Quick Connector (For Spade Terminals)

Overview & Parts List I made this to quickly swap the cords on a camera power adapter I have. Besides the 3d printed parts, you'll need: Qty 2: M3x8 Button Head Screw Qty 2: Male Spade Connector* Qty 2: Female Spade Connector* *I removed…

Downloads
231
Likes
109
Rating
3.67
P
PrintablesArduino

Nano Screw Terminal Adapter Enclosure.

The lid is held in place with M3 nuts and bolts. There are holes in the bottom to attach modular attachment points.

Downloads
226
Likes
38
Rating
0
P
PrintablesPrintercat64

Ender 3 V2 PSU terminal cover

A guard over the PSU wire terminal . This is part of my attempt for better cable management of the Ender3 V2 https://www.printables.com/model/160018-ender-3-v2-cable-guard…

Downloads
225
Likes
41
Rating
4.8
P
PrintablesHawkeye

Fallout-style Raspberry Pi terminal with Pi2/Pi3 & Waveshare 3.5" HDMI LCD

Saw the Fallout-style retro terminal design of Arthur Guy ( https://www.thingiverse.com/thing:4567037 ) & Mike Tong ( https://www.thingiverse.com/thing:4808443 ) some time ago, and felt that was very cool. So to make another one for the…

Downloads
223
Likes
67
Rating
0
P
PrintablesBluetopia

Cover for Meanwell LRS-150/350 Terminal Blocks

In order to avoid accidental contact with the terminals on a Meanwell power supply, I've put together a quick cover that clips over top of the terminals once everything is set up. Two versions are provided: a longer one for LRS-350 power…

Downloads
213
Likes
23
Rating
5
P
Printables3dKaos

LRS-350 Terminal Cover - Remix

Modified to include ridges on the side so when its slipped on the power supply it stays in place both horizontally and vertically. If you print to use and try to slip the cover from above you will break the side tabs. For best use, slide…

Downloads
212
Likes
24
Rating
5
P
PrintablesAcE Krystal

Kroonsteen (Luster / Screw terminal) Cover

I needed an easy way to cover up screw terminals I used to mount sealing lighting. So I designed these to fit different sizes of what we call in the Netherlands "Kroonsteentjes" what is "Luster screws" in English as far I can find. They…

Downloads
208
Likes
29
Rating
5
P
Printablesmelgish

LRS-150-12 terminal cover

Always good to be safe. This is a cover for the input/output terminals on a Mean Well LRS-150-12 power supply. It snaps in place and may help prevent forest fires. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Downloads
204
Likes
13
Rating
5
P
PrintablesGadjet

ArgoMax - Retro Terminal

Inspired by the fantastic Callisto 2 project, I set out to build my own 60's inspired retro terminal/console computer. It's designed to be quite modular and open to customisations. One could ad standoffs for any single board computer for…

Downloads
199
Likes
156
Rating
0
P
Printablesfns720

Cheapest 14x terminal block using Wago 221-415

We had to join 14 spot lamp wires - this custom 3D printed housing with 4x Wago 221-415 terminal blocks was the cheapest solution.

Downloads
195
Likes
27
Rating
0
P
PrintablesAdam Oellermann

Parametric Terminal Strip/Block Enclosure

Provides a quick-and-easy enclosure for terminal blocks, which can be installed without any tools and without having to disconnect the terminal block to run cable through a hole. The OpenSCAD file is parametric, allowing you to generate…

Downloads
193
Likes
32
Rating
5
P
PrintablesWiseone

Terminal Block Box - Two Wire

I had a need to fit some lighting fittings. The wiring is simply via screw blocks. Instead of using purpose built terminal blocks (of which I had none on hand), I designed and printed a couple of custom screw terminal block boxes. The box…

Downloads
190
Likes
24
Rating
5
P
PrintablesAlex

Terminal for SSD1106 1.3'' OLED (REMIX)

Remix of the Terminal for SSD1106 1.3'' OLED to make it shorter and to remove the internal structures

Downloads
181
Likes
24
Rating
0
P
PrintablesPeter H

VW BATTERY TERMINAL COVER

My Transporter batter had an insulator base but no cover over the positive battery terminal. Mostly they get lost along the way and serve little purpose, but it's just one of those annoying little things that's an easy fix. PETG is…

Downloads
181
Likes
35
Rating
5
P
PrintablesAnders R.

Alfa Romeo Giulietta Battery Terminal Cover. More designs.

Positive battery terminal cover for Alfa Romeo Giulietta. Files has been updated so now the “Giulietta” and “Alfa Romeo” logo is turned correct. Don't mind the pictures. Sorry It is based on a pre-facelift Quadrifoglio Verde 2010, but it…

Downloads
179
Likes
6
Rating
0
P
PrintablesYBars

Battery terminal block

You need to buy a long nut of the appropriate size, heat it (with a soldering iron) and press it into the terminal block. Block sizes for M5, M6, M8 nuts. I printed the M6 terminal block. Protective cover fits M5 and M6. Printed in PET…

Downloads
178
Likes
24
Rating
5
P
Printablesdarthrax

WAGO 222-412/222-413/222-415 or PCT 212/213/215 Terminal Block Clip

A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…

Downloads
177
Likes
32
Rating
4
P
PrintablesLord_Vader

Printable crimp terminal connector

This is a case for flat 6,35mm (1/4") terminal connectors. This is a work in progress, others will follow ;) Please dont use this for mainsvoltages or high voltages. Id use them for my car so like around 12V-24V. Currentratings are…

Downloads
176
Likes
40
Rating
0
P
PrintablesRyan Amey

Computer Terminal From Fallout TV and Videogame Series

Ah, greetings, esteemed Vault dweller! Welcome to the marvels of RobCo technology, where innovation meets reliability. As the creator of the iconic computer terminal you now stand before, let me regale you with tales of its wondrous…

Downloads
171
Likes
36
Rating
0