BOX OPENER - TESTED
Easy to print - Easy to handle Perfect for openeing your boxes New model: https://www.printables.com/model/1113064-box-cutter-box-opener-v20-tested
- Downloads
- 22,810
- Likes
- 4,436
- Rating
- 4.7
556 models
Easy to print - Easy to handle Perfect for openeing your boxes New model: https://www.printables.com/model/1113064-box-cutter-box-opener-v20-tested
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
Made two new versions with a more durable tip. 2.1 New tip with wider angle 2.2 Extra edge blend added
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
4 handle sizes, perfect for your DIY projects
Also tested with other charging ports Inspired by the box openers
In this final version, I’ve incorporated all the feedback and suggestions. The whistle is now even easier to print thanks to improvements in the internal structure. With thicker walls and an optimized design, it’s also louder than before.…
Easy to use mini hacksaw, No screws needed only a gentle push
The perfect way to open your beer !!! Shotgun + Can-opener
I want to mention https://makerworld.com/en/@O.B._Design for the inspiration. If you like this model don't forget to like, dowload and boost OBE_Design on makerworld !!! (Link to his model:…
The perfect hook for your DIY projects - quick an easy !!! You only need to screw a bolt of the corresponding size into the wall; with the keyhole hook, each component can be mounted quickly and easily.
Easy to print - Easy to handle Perfect for openeing your boxes
A super easy and quick to print label - reusable in endless situations This label has a scalable design if you want a specific dimension !!!
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
The perfect customizable coat rack, fully invisible !!!
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
Engish below Deutsch: Ich habe eine Desinfektionsmittelflasche auf der ich einem größeren Sprühkopf montiert habe, Mein original Gewindeadapter ist aber leider nach und nach gebrochen. Natürlich wäre es wahrscheinlich einfacher eine neue…
Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…
Easy to use Easy to print
IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…
A volumetric calculation was used to determine the precise placement of the lines, as the spool diameter decreases more rapidly when it’s nearly empty than when it’s full. Three versions have been uploaded: Version Description Percentage…
After the first attempt I made this one louder and easyer to print.
My first attempt on designing a high pitch whistle Let me know how to improve
Easy to print yet super strong bag clip !!! Super easy to clip on !!
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
Printable without support. Holes for microphone included. Filament need 12m (2 perimeters 15% infil). Versions A, B, C, D, I, J, K, L, Q, R, S, T…..For phones with cover, max phone depth 21mm E, F, G, H, M, N, O, P, U V, W, X…..For phones…
1, 3 are covers for boxes 2, 4 are boxes Easy dimensions change. Jars with coil:
I just received the newest Flashforge AD5X multicolor printer and I needed something to redirect the poop chute since the back of the printer is hardly accessible. I tried to design something that bolt on the frame but it was hard to get…
Easy To Handle Slide Lock Scalable in slicer
Easy printable pencil holder. Size cca 15 x 15 x 12(height)cm. It can be printed without support, because are used max. 45° angles. Filament need cca 50m (0,2mm, 2 wall loops, 15% infill). Tower inside diameter 49mm. Second models:
Easy To Print Doorstop !!
The must have tool for your workbench !!! Only 3,52 gram's !!!
The new center marker, now with ruler incl. and a more robust design !!!
Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…
Easy to print, Perfect for your DIY projects
SIze cca width 152 ( C,F 172) x depth 60 x height 93mm. Wall depth 3mm. Holes for pencils (C, F) size 16x15,5mm. For papers size 90 x 90mm (use not glued papers). Tested 0,2mm, 2 wall loops, 15% infill. Filament need cca 40-60m. Other…
Organizer Office Compact, easy print without support. Short and Long versions with and without drawer. Size vesion With drawer: Short version lenght x width x height 115 x 103 x 135mm, Long version 155 x 103 x 135mm. Size Without drawer:…
Perfect to finish and protect your bolts and nuts !!
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks
Easy printable without support. Cigarette box case 36 versions 9 sizes in 4 designs for 8 cigarettes sizes Designed for 0,15mm slicing and print. 9 different sizes in 4 versions. Use random seam. Model A…for 10pcs superslim long…
This is a iPhone 12 Case that I know fits and fits well. I printed mine in PETG Clear on my Prusa MK3s. Print instructions Print in PETG, and it will snap right on your phone.
Details I had mounted my GoPro to my helmet to shoot outdoor action movies. I love the original GoPro cameras for their great stabilization features, but they do come at a price. So who wants to see a costly camera banging on the ground,…
Perfect for drawing lines at the right distance
Model Overview This is a functional, one-part automatic plant watering spike designed for easy printing and instant use. It allows users to upcycle standard plastic beverage bottles into a slow-release root irrigation system. Because it…
Super strong shelf bracket, perfect to store your tools 3 sizes, let me know if you want an other size !!!
Perfect nut gauge for your toolbox You can print this in one or two colors.
Set of lego buildplates: - 10x10 - 10x20 - 20x20 - 25x25 Bricks comming soon !!! filament efficiënt
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
Router template to create a perfect radius on your corners
How to print: Use inner and outer brim !!! If your printer has issues with overhang, make shure to ad support force as shown in the picture. Make shure to use qualitative filament.
Easy printable. It can be printed without support. Size big version lenght x width x height 106 x 86 x111mm. Filament need (big version) cca 52m (0,2mm, 2 wall loops, 15% infill). In 4 versions with and without cards holder and in big and…
A nice, beautifull and easy to print towel hook !!! Needs only one screw !!!
Diameters 55, 75, 100, 120mm, height 50, 75, 100, 130, 160, 190mm. Walls thickness 2.5mm. Tested PLA 0,2mm random seam. Jars without coil:
4-Tone Quad-Chamber High-Decibel Whistle This is a compact, high-performance whistle engineered with four distinct acoustic chambers. It is designed to maximize volume and create an attention-grabbing, multi-tonal sound signature.…
Version 1: The part is a single print and snaps in place to make the hair clip complete. To make it work even better you can bend the middle part a little bit. Version 2: This part is the solution when snapping the legs in place doesn't…
Organizer Office Compact, printable without support. Size lenght x width x hight 115 (145-C, E) x 103 x 95mm. Use not glued papers 90x90mm. Holes for pencils (E2,3) cca 13,4x13,4mm. C and E are long versions. Wall depth Base 5mm, inserts…
16mm Gardena Gasket optimized for FDM printing by giving some more inner spacing. Can be printed in TPU 95A. But softer Flex material is advised. 16,6mm diameter for water tight function when printed cleanly 11,9mm inner diameter for easy…
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
After printing some Pokemon sitting on rather flat platforms it became clear that this wasn't suitable for the balance game. My kids thought they were cool but gave up on the game and just played with the figurines. So I set upon making…
UPGRADED EASIER BOX OPENER - TESTED Easy to use, easy to print, all with less filament use! Upgraded with stronger tip!
As thin as a toothpick and Stil 88 dB loud IMPORTANT: Use wall thickness: 3
A new box opener concept WD40 can be used to make it spin better
Easy to use and compatible with all clamps
Test Information I tested this hook using PLA+ at a 15% infill. I used a 20mm wood screw. 30lbs of resistance before breaking. Theoretically, using 4 or 6 supports (recommended) you could get up to 180lbs of bearing weight. Print at a 50%…
Easy printable pencil holder. Size A, B cca 20 x 16.5 x 11.5cm. C inside diameter 49mm. It can be printed without support, because are used max. 45° angles. Filament need 90-100m organizer and 60-80m inserts. C, D, E… insert for organizer…
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m (0.2mm, 2 wall loops, 15% infill). First complete parts B(C,D) and E(,F,G,H,I). Use not glued papers…
Model Overview This is a functional, one-part automatic plant watering spike designed for easy printing and instant use. It allows users to upcycle standard plastic beverage bottles into a slow-release root irrigation system. Because it…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
Print with 30% infill, 0.1 layer height, 4 walls and 8 top layers. Sand mating surfaces of the middle part with 80 and then 200 grit. The top and bottom parts should print smooth enough to make sanding unnecessary. They should be able to…
I designed a simple but effective slab box for 17 slabs. Keeps your graded cards free from sun, moisture and dust. The lid is pressure fit but you could scale it up or down yourself if you dont like the fitment. Printed on a Bambulab P1S…
Filament need cca 7-30m. Use brim. Size width x lengt (mm) 42x141 (A,H), 70x164 (B,I), 60x197 (C,J), 100,x212 (D,K), 72X215 (E,L), 120X229 (F,M), 160x229 (G,N), 55X180 (O), 75X183 (P), 64X188 (Q), 98X189 (R), 90X223 (S), 128X221 (T),…
A while back I was hired by Adam Savage to 3D model a small robot that he designed. We printed the parts out and put them all together in a Tested video. Now you can download those files and print a copy for yourself! I filmed an assembly…
Inside diameter buildings cca 55mm, height big 110, middle 75, small 40mm. Base diameter 149.5mm. Tested PLA 0.2mm. Second model:
Size 208x97x99(height)mm. Wall depth 3mm. Use papers 90 x 90mm. Bridges (Body B) 9mm. Tested PLA , layer height 0.3mm. Filament need for Body cca 65m (0.2mm, 2 wall loops, 15% infill). Other model:
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
just a remix with a larger angle for smoother feeding and redesigned that it misses the drag chain, still misses glass.
This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…
The project images show how each font printed at 0.4 mm. The great news is that the best five I have found are all open-source and totally free! Small 3D Font Tier List Font Free Quality Notes S Osifont ✓ purpose-built for CAD (ISO 3098)…
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
Organizer Office, easy print without support. Big usable drawer (inside size 155x 85 x 43,5mm). Size Base lenght x width x height 166 x 101,5 x 150mm. Wall depth Base 4,75mm, Inserts and Drawers 3mm. Bridges (Base) 11.4mm. E, F, G, H are…
After working on the Official SlimeVR case design, I realized that they were not easy to print on an FDM 3D printer. I've decided to modify the design and publish it here for people to build their own SlimeVR trackers using the DIY Kit !…
An easy and quick to print wall hook !!!
A slim version of the Poopyshoe to fit within small enclosures. The filament waste slides easily and don't get stuck. Tested in an Ikea Lack enclosure, fits well and it's easy to access to clean. Modeled from scratch based on…
Size cca depth 155 x width 197 x hight 124mm. For B1,2 you can use brim. First complete parts B and D. Filament need cca Base 60, inserts 60, Drawer 19m. Tested PLA 0.2mm, random seam.
From 20 years of experience as a Sushi Chef, this is my personal, professional Makisu. Thinner and lighter than a bamboo maki mat for less fatigue 20cm width fits Nori Seaweed sheets perfectly. To be able to precisely form the edges of…
Office holder. Size 97 x 115 x 92.5(height)mm. Holes for pencils 12,9x13,5mm. For papers size 90 x 90mm, use not glued papers. Filament need cca 65m (0,2mm, 2 wall loops, 0,15% infill). Tested PLA 0.3mm. Next versions:
Travel phone holder. Size cca depth 100 (115 Version2) x width 50 x hight 80 mm. For max. phone depth 10, 15, 22 (21 version 3)mm. Use low layer height. For axes use filament (just cut piece of filament). Holes for axes 2.2mm. Filament…
Candle hight cca 130mm diameter cca 65mm. If you need for sealing you can use toothpaste and for wick hole modelling clay. If you need magnify hole for wick with file or knife. Use wax or glycerine with low temperature (cca 70C). Profi…
This Mini Whistle weighs in at just ~1 gram yet delivers a genuinely deafening 115 dB , verified using a decibel measuring app (as shown in the test screenshot). Small enough to disappear in your pocket or on a keyring, it's a functional…
Size 155, 140 (width A , B version) x 102 x 98(hight)mm. Holes for pencils (D) 13 x 13mm. Wall depth Base 5mm, Insert C 5mm, Inserts D and E 2,5mm. Use papers size 90 x 90mm. Tested PLA 0.2mm random seam. Other models:
Box size 97 x 97mm (designed for papers 90 x 90mm) hight 34, 65, 100mm Base size A,…198,5 x 198,5mm, B…198.5 x 101.5mm. Easy print. Other model:
Perfect for screws op to 5mm Let me know if you want any adjustments !!
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks Now with a straw insert
A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…
I was looking for a complete and well-fitting X-axis drag chain for my Creality Cr-10 Max. Not being able to find anything, coming across a couple that were close to what I wanted, I decided to make my own. This model has been fully…
THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…
Filament need 2-3.5m. For C, D you can use brim. Float diameter 20, 25, 30, 35mm. Use flexibile material and low layer height. When is C 2,3 too long, cut it. Tested PLA 0.2mm, brim, random seam. Second version:
Easy to clip your cabkes in and out !!
I've also uploaded a version with extra space to allow for releasing one piston at a time, making cleaning and maintenance easier. To extract all four pistons, you'll need to print two of these blocks, one should be mirrored.