Detailed F-117 Nighthawk Magnet
Magnet based on the F-117 Nighthawk. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
- Downloads
- 237
- Likes
- 32
- Rating
- 5
Counting matching models…
Magnet based on the F-117 Nighthawk. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…
Glinthawks are easily the most annoying machines. But someone has to clean up all the scrapped watchers, so I guess I'm thankful for them anyways. This machine is to scale with the official board game and stands on a 30mm base. It is…
A wall mount for the Nighthawk M6 Pro. Has a cutout so you can plug in power, Ethernet and antenna connections. Print with the back facing towards the build plate and with supports. For supports that are painless to remove, use these…
Passionate about aeronautics, it was for meunthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model with the double slide and lock…
My Step-Dad worked in the Lockheed Skunkworks when they were developing the F-117 - though he swears he didn't work on it. (wink wink) Anyway, I made this for him as a Christmas gift - and printed it 'transparent' because it was…
About the F-117 Nighthawk The Lockheed F-117 Nighthawk is a retired American single-seat, subsonic, twin-engined, stealth attack aircraft developed by Lockheed's secretive Skunk Works division and operated by the United States Air Force.…
After receiving a message from Quantum Kitten aka Kala, I decided to have a crack at sprucing up this model. Thanks for the Links Kala. Do check the sizing suits your needs and see attached different variants in regards to finished mesh…
For mounting a Netgear Nighthawk M1 on the wall. Update 2023-03-02: Version 2 has some nicer fillets and don't hide the feet that can be removed to access the connections for the external antennas
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
This is a case for the Netgear Nighthawk M1, M5 and M6 that can be placed on a table or mounted on a wall. To mount it on the wall, a wall bracket is attached and the case with the device is slid into it. This allows the device to be…
I hadn't realised the differences between the two helmets from Destiny 1 & 2 Any queries give me a bell. Do check the sizing suits your needs as in its unsized, Cheers Jace Category: 3D Printing
Sollte der Router zu eng in der Halterung sitzen ändern Sie den Parameter “Spalt”. Zur Zeit steht er auf 0,3 mm. Mit 0,4 oder 0,5 sollte der Router leicht in die Halterung ein- und ausführbar sein. Meine Halterung ist im Wohnmobil…
Mount for the Netgear MR1100
Flat on the bottom, no support needed
couldn't download solidworks image, placeholder of real aircraft
My remix from the amazing Nighthawk FPV Drone.
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…
This mount has especially been made for the NETGEAR Nighthawk M6 Pro (MR6450) Router. Just mount it to any vertical surface and let the router slide in from above. It has a double rear wall with ventilation holes for thermal convection.…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Got my Netgear CM2000 Cable Modem, and for some reason it seems Netgear wanted it to look "sexy", which means it has a bunch of weird angles, and takes up a bunch of unnecessary space. I found a mount (…
I created a Nighthawk Formula Car Concept for everyone, who like Formula 1, Cars, Stealth technologies and Concepts :-) I took and remodeled two great original models by K987 and CgManuil from Thingiverse and Printables and made it into a…
This is a wall mount bracket for the Netgear Nighthawk M5 (M5100/M5200) I could only find M1 and M2 brackets and none were suitable for my needs. Designed this in Tinkercad. M5 slips in the back into the pocket, then the rear spacer slips…
About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…
This is a modified cable cover that allows you to mount the chamber thermistor for the LDO tool head PCB to the cable cover of the Galileo 2 extruder on your Stealthburner tool head. This is a remix of both the LDO Nighthawk cable cover…
Modified arms for the Nighthawk drone for using 2205 motors instead of the 2207's
The Lockheed F-117 Nighthawk was a highly classified, single-seat stealth attack aircraft designed and operated by the United States Air Force (USAF). It was the first operational aircraft to be designed around stealth technology, which…
After a longer absence from my home and freezer I was never secure that there was no power outage and the food was thawed and refrozen after the power was back. The designed modul can help me in the future to detect a malfunction during…
A minimum impact approach to adding 30mm stack support to an already fantastic drone. What you'll see on mine in addition to the changes made to the model were to accommodate my specific hardware. - Drilled all 4 front camera mounts out…
I made this case from scratch for my Netgear Nighthawk M6 Pro to protect it from the hazards of baseball games. It has served me well and has survived several falls and drops. Lid secures with several very small screws.
Wall mount for the SX10 10-port multigigabit Nighthawk gaming switch - because Netgear were too preoccupied adding LEDs and as many angles and as possible to this thing, they forgot to add a couple wall mount holes in the bottom, like…
A simple wall mount for the MK62 Nighthawk Mesh router from Netgear. Rather than having to have my meshes sitting on the floor or find surfaces to set them on, I opted to mount my mesh router satellites on my house's walls. You'll need 2x…
Wall mount for NETGEAR Nighthawk X6 R8000 WiFi router
The original model didn't fit well with my cm3000 modem, specifically the cable hookups. so rather than just drill a hole like a normal person, I redid the whole darn thing in CAD. Now your modem can gain 0.02 horsepower from all the…
Allows using 2205 motors in the arms, with slots instead of holes for better compatibility.
A protective rubber boot, that doubles as a non slip base for a Netgear Nighthawk M6 Pro mobile router. With openings for all connections, plus these become the securing points for the travel top. Made from TPE 83a shore. Enforced support…
Magnet based on the F-117 Nighthawk. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
This is a vertical stand for a Vertical Router Stand for NETGEAR – Nighthawk AX5400 I bought at Costco. Intent was to take less of a footprint on the counter where I needed it. Center to Center mounting holes are spaced at 105 mm if you…
these are 3d scans from my 96 CB750 nighthawk, they are not neccisarily ready to print they are the raw scans. i plan to make more easily 3d printable files in the future but i wanted to make sure people got these as soon as i had them.
Created by Chanh Phuong Category: 3D Printing
This is a new base for the best 3D printed Christmas tree ever. The only problem is that the base sucks. This base is taller, grasps the tree better, is more attractive, and is just heavy enough to meaningfully lower the center of gravity…
House had an empty high-mounted wall box to which we could run ethernet, so this adapter allows you to mount the Netgear box right “on to” the box. The adapter plate has plenty of holes so that you can run wires from inside the box to…
This is a very simple holder to support a satellite for a Nighthawk Mesh Network Router. I needed to hang it in a very obscure place on a single 2x4. May not fit your particular purpose, however, there are three versions. (1) with (2)…
These are shells for the Hyperx Pulsefire Saga mouse that make it look like a F-117 Nighthawk jet. I really wanted to make a mouse that looks like a fighter jet and the Nighthawk fits a mouse shape well. It's probably not very ergonomic…
A mounting solution for use with WWG2 extruder & Night Hawk or EBB36 toolboard, remixed from Tooks who remixed SputnikOC3D's model for the SHT36 Max. This toolboard is designed for use within the Draftshift Design Stealthchanger project,…
I used .15mm layer height and 40% gyroid infill to make this print. Printed on Mini using PLA Pro. The router will fit into the nest and hold firmly. Free my models 021881f0
stealth-themed stand to display the F-117 nighthawk ( https://www.thingiverse.com/thing:1691503 ) gave it a basic airfoil shape, but nothing too detailed display text included on the front (or back?) Category: Vehicles
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
A Tripod mount for the Nighthawk M6 and M6 Pro. Added Tripod mount Adapter. Added removeable door to prevent M6 from falling out when laid horizontal. Added cutout in removeable door for power button.
My dogs raw food comes in round tubes. This tray allows it to thaw without dripping water and blood onto the fridge shelf and keeps them in place.
This is a mounting system for a securely fixing an XT60 adapter in place to an Emax Nighthawk 250 frame at the back. The mount holds the XT60 in a vertical position which fixes the battery cable in position out of the way of the…
This remix just removes the 2nd set without holes and the modem dummy. This mount should fit any CM11xx series modem. Fits my CM1120 perfectly. Printed on an Ender 5 Plus. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No…
used to put a netgear M1000 nighthawk on the wall to improve wifi and cellular distance. holes for mounting/ ventilation
A minimalist silhouette of the F-117 Nighthawk that took longer to make than I'd like to admit.
This is a model of the Lockheed F-117 Nighthawk. Featuring a low-poly, multi-color design that's print in place.
Mounting holes fit Netgear Nighthawk WiFi 6E Router
This is a simple little model that works with the Clockwork 2 Extruder for the Stealthburner. I'm using a E3D PZ Probe on my Voron, and wanted to keep everything within the toolhead, since I'm using a Nighthawk 36, the PCB for the…
A 2-piece model of a Federal Signal Streethawk lightbar dome
3D printed model of the famous Lockheed F-117 Nighthawk. Featuring state of the art stealth technology and a sylish base. Plaque is printed with 2 colours. Glued to base afterwards. Arm is printed sideways with supports enabled.
Tool box lid and latch for Honda CB700SC Nighthawk S. Unknown if latch will work with factory lid as i designed this part from the grooves in the airbox and pictures. When printed it fits and works very well. Minor filing on latch…
This is a container for the netgear nighthawk M1 5g LTE modem. I printed it in light color plastic to help the device not heat up so much during hot days, and allows me to hang the device from chain link fence using a bungee cord to hook…
To mount this to your Phoenix you will need longer m2 screws, and 1 m3 screw.
Simple vertical base for Nighthawk R6850 Router v1 → first model v2 → second model with some rounded corners printed in Atomic PLA - no supports, variable height modifier, brim (always)
Antenna holder for emax Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915 Unterstützte meine Arbeit / Support…
Remix of "EMAX 250 Nighthawk Pro Side Cover" from norf Honecomb tested. A little wak, but looks awesome! =) other not tested. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil…
EMAX Nighthawk 250 XT60 mount Category: R/C Vehicles
this is a straight forward idea but its a tricky print, its 4 pieces so it will fit on a large bed printer, if you have a huge printer you may be able to get away with one. it fits on a cb750 nighthawk my specific year is the 96'. it…
The Netgear Nighthawk A7000 WiFi adapter can be plugged right into your computer, but if you want it on the provided extension cable you have to plug it in the end that has a weighted magnetic base. This base is very bulky when standing…
Camera mount plate and standoff to clear 7" props. Spacer to offset Hoverthings landing skid for off set from mounting the front arms above spacer vs. rear arms below spacer. Non commercial please Category: R/C Vehicles
Remix of "EMAX 250 Nighthawk Pro Side Cover" from norf Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915…
Very simple EMAX Nighthawk 250 landing gear with more distance to the ground for landing in grass. Category: R/C Vehicles
EMAX Nighthawk 250 arm guard. Best result with Soft PLA. ~15gr each with 50% filling, ~10gr with 10%. Category: R/C Vehicles
I wanted to add a fuse tap to my 1995 Honda Nighthawk. However I didn't want to damage the OEM fuse box. This spacer allows one fuse tap to be added to the 15A fuse. Attached is the freeCAD and STL of the model. In the first sketch, you…
EMAX Nighthawk 250 RunCam Sky+ mount Category: R/C Vehicles
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
This is a bracket for mounting your GoPro/generic GoPro looking 'Action Camera' securely to an Emax Nighthawk 250 Quadcopter at a 20 degree angle. If anyone wants any different camera angles let me know and I'll work up some other…
Created by Chanh Phuong Category: 3D Printing
Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
1.75mm filament is used to make a hinge pin. Supports: OFF Adhesion: OFF Infill: whatever%
The Xenopus Thaw Float is a custom-designed, 3D-printed laboratory tool tailored for thawing of cryopreserved Xenopus samples. Engineered to fit one Corning 2 mL vial , the float ensures stability and buoyancy during the thawing process…
EMAX Nighthawk 250 MinimOSD mount Category: R/C Vehicles
a small miniature of Lockheed F-117 Nighthawk fitted in a wall for display
I wanted a way to take gym selfies using my bench attachment port and Pixel 10 XL pro.
Remake from https://www.thingiverse.com/thing:808768 (3mm) but intended for flexible PLA. If this is printed with normal PLA, the legs of the drone need to be removed so the gear can be inserted from the side. Difference: Bridged legs…
Netgear Nighthawk RS700S Kallax Mount. RS700s uses M4 hardware. The Kallax<->nighthawk mount uses M6x6mm insert + M6 hardware
Needed a way to nicely mount a Nighthawk CNC controller into my CNC cabinet. This was a quick and simple design and used M3 heatset inserts for mounting the controller to the plate, and then 4mm/M4 holes to mount from that into my…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
A mounting solution for use with WWG2 extruder & Night Hawk or EBB36 toolboard, remixed from Tooks who remixed SputnikOC3D's model for the SHT36 Max. This toolboard is designed for use within the Draftshift Design Stealthchanger project,…
This is a model of the Lockheed F-117 Nighthawk. Featuring a low-poly, multi-color design that's print in place.
ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…
Lockheed F-117 Nighthawk Wall Art; can be scaled easily and can be hung or stand alone. I also take requests