PZ Probe PCB Mount for Stealthburner and LDO Nighthawk 36
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A PZ Probe PCB Mount for anyone using a LDO Nighthawk 36 on their Voron Stealthburner
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 17
- Makes
- 1
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a simple little model that works with the Clockwork 2 Extruder for the Stealthburner.
I'm using a E3D PZ Probe on my Voron, and wanted to keep everything within the toolhead, since I'm using a Nighthawk 36, the PCB for the toolhead is behind the extruder motor, so this allows me to mount the PZ Probe PCB on the original PCB mount. This is a small spacer that makes it possible.
The hardware I used is 2x M2x4 SHCS and 2x M3x10 FHCS, print this in ABS/ASA
Install Instructions;
1. Attach the first M2 screw to the left terminal. This cannot be reached once installed.
2. Pivot the PCB to prepare the Original PCB Mount, and sandwich them.
3. Install the spacer onto the Clockwork Extruder
4. Pivot the PCB into place and install the last M2 Screw
