215 models
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
knife for throwning i think that slim look better
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
its a star, but it doesn't shine. It hurts.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is a dangerous ninja star so be careful.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
A quick Throwing Axe Prop I mocked up after going down the competitive axe throwing YouTube hole. It's made to print in two pieces without support. I've printed it with the following settings: .4mm nozzle .2mm layer height PETG 3…
Print approx. €7.05–€8.61 excl. taxPreliminary estimate for PETGSource material: PET
Description This is the knife/throwing knife from the game Helldivers 2 Printing: Nozzle : 0.4 mm Layer height : 0.2 PLA supports needed
Print approx. €4.81–€5.87 excl. taxPreliminary estimate for one variant
Safer ninja star ig.. but be careful can still hurt someone
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a dice throwing cup, that I use for backgammon. The cup that came with the board has a flat bottom. This cup has a rounded spherical bottom, to help produce more random rolls.
Print approx. €5.83–€7.12 excl. taxPreliminary estimate for one variant
These are the flying dragon throwing knives that i used in my recent video about 3D Printed Throwing Weapons, these are functional so be careful!! You can glue them together to make one BIG knife or have 2 knives, they are heavy and big…
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for PETGSource material: PET
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
With the apparatus it is possible to make very well audible that a horizontally thrown ball and a free falling ball hit the ground at the same time. The device is also very suitable for measuring the fall time with PhyPhox and the…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
The gcode file uses a 0.6mm nozzle and 0.5mm layer height.
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Girlfriend needed a throwing knife for cosplaying so this s the result of a that Slice at 0.1mm First layer 0.3mm will give the edge a shiny surface (if you print in 2 pieces) Good scale is at 180% - scale depending on need/build size
This is 1:1 replica of JKR523 throwing knife. Original is full metal, but in my opinion 3d printed works just fine. Remember that throwing knives requires lot of practice to master, so don't give up after few tries.
The source marked this model as adult content.
These 3D models are faithful replicas of Shurikens, Ninja throwing stars, that can also be used as coasters. [ CAUTION! ] Please be careful not to injure others or yourself, as the shapes of the models are very sharp.
Use this ninja throwing knife to expand your ninja weapon collection.
The source marked this model as adult content.
Fun little throwing knife. Works great with 50% infill to give it some weight. Printed at .1mm to keep the detail, but works great at .2mm. Used a few drops of CA to glue together.
I was having a lot of fun with RAWICE511's throwing card, so I thought I'd bring it to Printables! It does make a whistling/whooshing sound when thrown right, but it takes practice. Printing in PETg or ABS is recommended since it has more…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a fun throwing toy with 4…
Print Settings Supports: No Layer Height: 0.2mm Infill: 15% --- Use variable layer height for best results on the blade. Finish with a black paint wash to highlight the design on the handle.
This is a ninja throwing star. Recommended slicer settings: 0.12 mm layer resolution, 3 walls.
Its a clasic throwing star / shuriken.
A model of the Apex Legends throwing knife, made by me in Blender. There are low poly(unbeveled) versions of the model, which are my recommended method for editing the model, I.E. for a remix. There are also beveled versions, meant to be…
A pack of 3 types of throwing axes. I call the 3 types WoodCutterAxe, BattleAxe, and IcePickAxe.
Its a throwing star / Shuriken with 6 prongs.
Its a shuriken / throwing star with 3 prongs.
I would recommend printing 2 of these and then using super glue to attach the two halves. I will also sometimes wind a strip of leather around the handle to give it a rap or I will tie paracord through the holes in the handle. DISCLAMER:…
Regular print setting 0,2 layer and no supports should be ok, but feel free to experiment This thing definitley has more lift than just a stone or ball… just give it some rotation and good angle :) Disclaimer: Should fit in all cd-dvd…
The design of this throwing axe is inspired by the Tomahawk from the first installment of the Call of Duty Black Ops series, released in 2010. The Tomahawk was made popular by the multiplayer game mode Sticks and Stones. I recommend…
I've seen a lot of cool designs for pool noodle sword handles and have even designed a few myself. However, I believe that it is time that our poodle noodle weaponry diversify, and thus, I present Pool Noodle Throwing Stars. Aside from…
A pair of throwing stars with symbols from the Ninjago series. The ring around the throwing star is designed to protect against injury. Use at your own risk. Best printed in TPU!
this file is a ready to slice model. print with PLA or ABS. this is in beta stage. if you want to use paracord for the grip you will have to do it comment if you want me to show how.
Version one -'Z'. Version two -Fidget Spinner. Version three -Battle Damage. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains…
I designed this simple throwing gauge. Initially, I started with an overengineered design but later simplified it. The gauge consists of a single part for all three arms (print x3). The base includes four slots for 20x3mm magnets, useful…
This throwing axe is a safe alternative to throwing actual steal blades. Meant to be thrown at a bristle board, like one you would throw plastic darts at but with longer bristles. Might upload a printable bristle board later, I may not.…
WW1 British soldier throwing a grenade. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and…
This is an adaptation of a traditional tool for wheelthrowing called tombo sticks. They're for making consistently sized pieces in production settings or for sets that require precision like nested bowls. You can also adjust the…
made this for my helldiver cosplay Category: Props
Print in PETG rather than PLA. When throwing this around and banging into things, the softness from PETG is less likely to break. Or print the file without wave in TPU. Print at any layer height. Set infill to 100%. Set seem location to…
Glider SWAN Small throwing glider with size 135x90x20 mm printed from one piece without supports. The wing is made of only one layer, so you need to set the layer height to 0.10 mm. At the same time, it is good to set the fill to 100% for…
Its a strange shuriken / throwing star, for more stars chekc out my throwing star collection
Been on wanting some Berserk props, so modeled this up Category: Props
This model is compatible with the lego system.
3D-printed Throwing Star patterned after a stainless steel one... (steel one shown in one of the photos). Unassociated tags: prop, toy, karate shuriken, karate star, karate tool, karate weapon, kid shuriken, ninja star, throwing star My…
I created this model for my cosplay of Altair from the game Assassin's Creed. print parameters: PET-G material, infill 25%, perimeters 5
Inspired by Banshee Advanced Throwing Cards by Rick Smith Jr. Slice it with 0.2mm layer height and there should be two layers. The holes are supposed to make a whistling noise when you throw it but it didn't work for me. (Maybe you have…
This is throwing star. this project uses little filament! for people over 5+
Throwing stick, bellying rib, throwing rib for bellying out when throwing pots
The model is just one half of a full throwing star, you may leave it that way or print 2 copies and join both of them. I personally like the model as it is. Please be careful not to throw this at people or animals, it may be plastic but…
Do you want to practice knife throwing or just have fun and spin a knife around your fingers. You can also use it as a decoration for costplay. Then this training knife is just right for you!
Inspired by Banshee Advanced Throwing Cards by Rick Smith Jr. Do not throw it to people! (And yes, it can rip through paper) Also, Don't throw it to a wall cause it could break! (3rd picture) There are two versions and the thinner version…
A very light yet strong card, that includes an aerofoil which generates asymmetrical lift, which in turn makes the cards glide in spirals, with greater accuracy. Just a couple of grams to print a bunch, and very fun to throw! They are…
Its a strange throwing star / shuriken.
Ti22 throwing and survival knife is a really nice and balanced throwing/survival knife (also the 3D printed one is a good practice). I machined my titanium knife, and it turned out really nice and easy to throw. I made a handle cover and…
New parts to compliment the excellent model created by Cameron: Fully Printable Pottery Throwing Gauge I recommend using his improved “Gauge Bolts Stronger STLs” for the bolts All preferred parts designed to be printed in Flex. I used…
This model is compatible with the lego system.
EN: This is a simple six-pointed shuriken ninja throwing star. Print with three perimeters and higher filling, otherwise it is not stable enough and does not fly well. We have had good experiences with TPU in tough combat use ;-) — I…
This is a glider that glides in the air when thrown
Use M3 brass inserts For the blade you will need a M3 10mm, or cut a 20mm.
a super simple sci-fi throwing knife
I am working on making a few somewhat functional and realistic Batman gadgets, and one of those was a batarang which could be thrown like an actual throwing knife and have weight to it. My solution was to make a shroud which follows the…
This model is compatible with the lego system.
This 3D model represents a monolithic, medieval-inspired throwing knife.
Introducing the 66mm outside diameter line throwing round for your can canon. This design is inspired by the US Navy MK 87 line throwing projectile. Print both parts at 100% walls in the upright position with no supports. Feed 550…
This is an easy-to-print 3D throwing axe prop designed for display, cosplay, training props, and decorative use . The model features a simple, balanced axe shape inspired by traditional throwing axes, while remaining a non-functional prop…
This model was created at the request of a customer. It is available here for free under a non-commercial/no derivatives license - please dont be that person trying to sell these! That said, this model is awesome to print and assemble.…
I'm not associated with BigFredsCustoms but I made his axes and wanted a wall mount for a throwing axe so I here it is. :) Download the model for the throwing axe here: https://www.etsy.com/listing/1389610013/gimlis-throwing-axes
Updated 01.25.26: Increased tolerances to accommodate different materials. This is an 8 point shuriken ninja throwing start that allows you to add a US quarter in the center for weight. The cap can be removed using tabs to retrieve the…
I'm printing in TPU95A with 4 walls and 15% gyroid infill.
I have been having a lot of fun with RAWICE511's throwing card, but I also like them for more than throwing. I use them for filament samples too! Since I plan on making one of every filament I get, I thought they could use a box. Maybe…
This is a remix of https://www.thingiverse.com/thing:240639 1st thing i changed is flatting the part. As i was having problems printing because the original had some spokes pushing out the bottom of the print. 2nd thing i changed was…
Made this simple Elden Ring Throwing Dagger model. As always you may need to sand or glue the parts together to get them to fit together. Just use the exploded view for assembly. Should be about 12 in long. be sure to post a make and…
this double bladed dagger prints fast and is easy to throw
These are throwing knives so you can go stealth in airsoft. I printed them with high strength resin. I used black and clear. When I took them off the printer they were kinda sharp so I sanded them down a bit.
This is a throwing dart for paper or cardboard or any other soft target. Increasing infill from 20% to like 30 or 40 recommended so it is heavier. please let me know if you like the design.
Vase Mode Throwing Dart somewhere between a lawn dart and a throwing knife, its is designed to fit a nail with a head 8mm wide and a shaft 3.75mm the nail head does not need to be cut off etc it should push right in from the back. the…
"3D-printed throwing knife replica, made for props and costume fun."
This is a simple, easy-to-print throwing-knife–style model with a clean, symmetrical shape and minimal detail. The streamlined design keeps print time short and makes it suitable for quick prints, display pieces, or prop collections. The…
This is a set of handles for the two throwing knives listed below. Note that the black knives require a different handle from the silver ones. The reason I made these is because the parachord-wrapped handles can be easily damaged and the…
Print Settings: Infill: (whatever you choose it doesn't matter) Adhesion is recommended but not needed
Throwing knife from the Dark Warsmith set.
This is a hand accessory for "kid ninjas." It is intended to go on the back of the hand and hold a throwing star mount for a kids ninja halloween costume / playing prop. While the "hook and snap" design worked out ok, it is by no means a…
This is a model of the Throwing Knives from The Finals. More info, documentation, and source files can be found on Gitlab .
itis perfect to throw
Axe throwing is fun. Axe throwing with punny awards is AXE-cellent! Remixed on TinkerCad, which is also where I added the text. Print information Since time was tight, I printed these at 80% of .stl's size, which meant I was switching…
Four great Shurikens
Small throwing knife for cosplaying Change filament on last 2 layers for a dual color print
V2 throwing knife: less plastic, easy build, more fun for safe tossing.
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
My wife was looking for a new hobby during Quarantine, So I designed and created a Throwing wheel for her. 3d printer parts and an arduino. It works really really well Would you sacrifice your printer parts for love? :) Print instructions…
Throwing peg for DLG (recommended to mid- to lower-power launch only) Print Setting & Post Processing: Open as “Project” with Cura slicer See print profile inside .3mf files for detail print setting Non-uniform scaling to fit your finger…
