Search results: ths

Sort order

592 models

P
PrintablesOlivier Popiers

Starwars deathstar lithophane lamp

A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…

Downloads
6,117
Likes
1,316
Rating
4.96
P
PrintablesBen

M2 - M20 Torx Screws in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…

Downloads
6,049
Likes
2,707
Rating
5
P
PrintablesBen

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Downloads
3,029
Likes
1,164
Rating
4.5
P
PrintablesSneaks

Compact M3 Tool - Quickly Measure Prusa M3 Screw Lengths

I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…

Downloads
1,007
Likes
225
Rating
4.95
P

Tamiya TT01 wheel hexes [different widths]

Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…

Downloads
503
Likes
75
Rating
5
P
PrintablesBen

M3 - M16 Headless Torx Screws in various lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…

Downloads
384
Likes
102
Rating
5
P
PrintablesAndreas_O

Deathstar for money gift

I printet with PLA 0.2 mm Leyerheight. The fit of the inner Cylinder is tight, so you need to sand one half a bit down to remove the upper part easely.

Downloads
280
Likes
40
Rating
3
P
PrintablesRobertusMaximus

22 Degree Stand for Make Noise, Erica Synths, or other single row skiff/cases

22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases Deep in the depths of the Megalopolis' is where the finest music is born. Status, upper level personages, mutant, or freak, synth music is made by all.…

Downloads
130
Likes
8
Rating
0
P
PrintablesKlave

Radius gauge, no maths (almost). 2 versions

This is a remix of Thyn's Radius Gauge for calipers. Initially I just added some nice fillets and made sure it fitted my plastic calipers and when I tried it I saw that a 38mm diameter cylinder yields a measurement of 7.9mm. Multiply by…

Downloads
125
Likes
23
Rating
5
P
PrintablesLudo B

Festool stofzuiger 3 monden. Festool vacuum cleaner 3 mouths.

Stofzuig monden voor op de slang van een Festool stofzuiger te plaatsen, voor op kleinere plekken te kunnen stofzuigen. Vacuum nozzles for placing on the hose of a Festool vacuum cleaner, for vacuuming in smaller places. Ludo

Downloads
102
Likes
10
Rating
0
P
PrintablesJacques Lopez

Screen Printing Squeegee – Variable Widths & Extension Connector

This 3D-printable screen-printing squeegee is designed for makers and workshops looking for a versatile and easy-to-make solution. Available in multiple widths and two heights: S for small hands M for medium hands, ensuring a comfortable…

Downloads
101
Likes
18
Rating
5
P
PrintablesKlonan

Mic stand to GoPro/Three-prong adapter (3/8ths thread)

A simple adapter from 3/8ths inch Microphone stand thread to the three-prong mount system used on GoPro and similar Action camera accessories. Printed in Prusament PETG black.

Downloads
85
Likes
17
Rating
0
P
PrintablesRobertusMaximus

Version 2 - Curved Version 22 Degree Stand for Make Noise, Erica Synths, or other single row skiff/cases

With a Curved back and shortened overall length. 22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases. Making music is much simpler with your Euroracks single-row cases at a splendid 22.5 degrees. No…

Downloads
85
Likes
10
Rating
0
P
Printablessaracha42

Decoy Moths

These small moths clip to branches or sit on flat spots as decoys to deter real moths from choosing that plant to lay eggs. There is no guarantee they will work, but at a third-of-a-penny each they probably can't hurt the plants. There…

Downloads
46
Likes
17
Rating
0
P
Printablesbeltmatt_usa

Minnesota Rebel Alliance Northstar Division Sign or Challenge Coin

This is my take on the mn rebel alliance. There are lots of similar models and logos out there. I wanted bigger laser eyes and the North Star so I used tinkercad and used some .svg files created in vcs. I attached the .stl for those of us…

Downloads
33
Likes
23
Rating
5
P
PrintablesDaniela

educational tool / maths

this is an educational tool used for maths addition you can count up to ten and ill post the cubes are gonna be down below it can cost up to 18 if cubes placed next to each other on this board the cubes have dents and the board have…

Downloads
4
Likes
2
Rating
0
P
PrintablesSalvadori3D

Cute Tiny Articulated Kawaii Fox (2 tail lengths)

Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Thrilled to introduce my newest flexi model - this adorable…

Downloads
7,147
Likes
881
Rating
4.97
P
Printables3DMason

Articulated Dachshund - 3 Different Lengths - No supports required.

Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…

Downloads
4,245
Likes
521
Rating
4.81
P
Printablesm_collectable

Minecraft Sword Toothpaste Squeezer Pixelated Texture - Multiple Slit Widths

Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…

Downloads
4,007
Likes
826
Rating
4.85
P
PrintablesSalvadori3D

Cute Tiny Articulated Doggie (3 tail lengths)

Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Introducing my latest creation—a lovable little pup that’s sure…

Downloads
2,358
Likes
322
Rating
5
P
PrintablesBen

M2.5 - M10 Countersunk Screws in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…

Downloads
2,340
Likes
452
Rating
5
P
PrintablesJSchell1309

Muzzle Thread Protector - Threaded 1/2-28 - Various Lengths, Diameters, and Designs

Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…

Downloads
2,158
Likes
93
Rating
5
P
Printableskwerkshop

Articulated Sausage Dog KEYCHAIN - Multiple Lengths Available

A print in place model of a sausage dog with a keychain loop. Watch the sausage dog dangle from a keyring! The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down…

Downloads
1,837
Likes
212
Rating
5
P
PrintablesEastman

Deathstroke Bust (pre-supported)

Printing instructions Deathstroke comes in two pieces: a main bust part, and a base part, to be printed separately. FDM This one is an easy one on FDM printers. No supports required for either part! Resin As usual this one comes…

Downloads
1,767
Likes
287
Rating
5
P
Printablessh

🐛MMMega Millipede: Print in place, articulated, support free, multiple lengths, optimized.

Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…

Downloads
1,714
Likes
300
Rating
4.9
P
PrintablesBen

M5 - M20 Hex Screws in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Hex screws according to ISO, ranging in sizes from M5 to M20, each available in lengths of 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40…

Downloads
1,409
Likes
795
Rating
0
P
PrintablesFLWE

Lego compatible Technic Bricks all lengths!

These are lego compatible technic bricks. The models here are only a selection for convenience. All length sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that…

Downloads
1,324
Likes
178
Rating
4.5
P
PrintablesGoldXD

Hearthstone (Multi-Material)

Print on Prusa MMU Everybody needs a Hearthstone. Stone Filament: https://smile.amazon.com/ZIRO-Printer-Filament-1-75mm-Marble/dp/B01IIAC2MW/ref=sr_1_2?ie=UTF8&qid=1521210609&sr=8-2&keywords=ziro+pla&sa-no-redirect=1 Teal Blue Filament:…

Downloads
1,287
Likes
172
Rating
4.93
P
PrintablesVeiu

Circle of Fifths

Circle of fifths with template highlighting major and minor chord progressions

Downloads
1,261
Likes
172
Rating
4.9
P
Printablessh

🐛Loong Millipede: Print in place, articulated, support free, multiple lengths, optimized.

➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…

Downloads
1,210
Likes
174
Rating
4.9
P
PrintablesBen

M2 - M20 Torx Screws with Ribbed Socket head in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws with Ribbed Socket head according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm,…

Downloads
1,067
Likes
750
Rating
5
P
PrintablesFranz

Ender 3 S1 - Secondary Spool Holder (various lengths)

Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…

Downloads
1,049
Likes
91
Rating
4.77
P
PrintablesTOKENIZER

osVAC neo F32H32-withSlipring + step + Fusion 360

F32H32. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…

Downloads
993
Likes
59
Rating
5
P
PrintablesHunter Greene

Aquarium Viewing Cave (Multiple Lengths)

A few lengths of simple under-substrate cave that your fish can explore and you can watch them in since this goes against the front glass. Substrates and plants can be put all around it and in the center hollow. Just keep the tunnel…

Downloads
905
Likes
140
Rating
5
P
PrintablesPeter Pain

Oathsworn: Into the Deepwood - Playerboard V2

This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…

Downloads
896
Likes
55
Rating
4.83
P
PrintablesPete

Bullet Journal Days and Months - czech and english

EN Bullet Journal (also known as Bujo) is a mindfulness exercise designed as a productivity system. It is a method of personal organization developed by digital designer Ryder Carroll. This system helps calm the mind, organize thoughts,…

Downloads
893
Likes
76
Rating
4
P
PrintablesMici

DUMMY 13 goes to COMIC CON - Deathstroke - V1.1

V 1.1 28. Feb. 2024: The katana has been extracted into a new set to meet the new license requirements V1.0, 26. Jan. 2024: first release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is…

Downloads
874
Likes
307
Rating
0

Improved, new, reusable zip ties! 4 lengths to choose from, batches included, PETG recommended, but PLA works too, v2.0

Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…

Downloads
804
Likes
124
Rating
4
P
PrintablesSteveJohnsen

Center Marker Finder / Gauge / Template, 90 & 45 Degree Square & Protractor, for Dowels, Square Stock, etc. - UPDATED: 6 Slots Widths

UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…

Downloads
790
Likes
116
Rating
4.73
P
PrintablesBen

M2.5 - M30 Knurled Thumb Screws in all sorts of lengths (incl. STEP) - Print in Place

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Knurled Thumb Screws, ranging in sizes from M2.5 to M30, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm, 60 mm, 70 mm,…

Downloads
752
Likes
383
Rating
5
P
PrintablesSueg

Squirrel withs nuts

Squirrel withs nuts

Downloads
748
Likes
107
Rating
4.67
P
PrintablesFelte

Star Wars DeathStar Docking Bay 327 Diorama

Update 2022-01-16 Making Of Video with FX: Parts for my Death Star Bay 327 Diorama. I build this to show my Star Wars Spaceship Models in the right place. The base case is made from 10mm waterproof plywood. Lighted Spacedoor ring i cut…

Downloads
739
Likes
183
Rating
5
P
PrintablesPapaNoah

Can Cover remix - for wider mouths

This is a Remix of the Can Cover Version 2 by dalrmat. It is designed for people where the mouthpiece of the original Version is too small. Protect your drink from insects. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts:…

Downloads
716
Likes
103
Rating
4.75
P
PrintablesStark

90° rotated HSW Hook (Updated lengths!)

This is a simple hook which is rotated by 90°, for my specific orientation of HSW which is rotated to maximize the number of slots in my enclosure space. I got the original idea from the HSW Hook by @Horacio…

Downloads
715
Likes
99
Rating
5
P
PrintablesFLWE

Lego compatible Beam all lengths upto 50

These are lego compatible beams. The models here are the most common for convenience. All lengths can be configured on the Perfect Printable Bricks website . If these don't quite fit right with your bricks you can fix that by changing the…

Downloads
688
Likes
76
Rating
4
P
PrintablesFabmaszter

Oathsworn Terrain

This is a custom terrain pack for the boardgame Oathsworn. I gathered a bunch of existing objects (thanks to the awesome designers!!), scaled them appropriately and put them on matching hex bases. I felt like treestumps and ruins look…

Downloads
687
Likes
71
Rating
5
P
PrintablesTOKENIZER

osVAC neo M32H32-withSlipring + step + Fusion 360

I integrated a slip ring into M32H32. Ich habe in den M32H32 einen Drehring eingebaut. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis…

Downloads
663
Likes
46
Rating
5
P

Caliper Radius Finder Addon - No Maths Anymore!

The design in question is for an extension or add-on accessory for a caliper, known as a radius finder . This tool is specifically engineered to measure circumferences that are beyond the reach of the caliper's existing jaws, due to their…

Downloads
648
Likes
284
Rating
4.8
P
Printableskwerkshop

Articulated Sausage Dog - Different Lengths Available

A print in place model of a sausage dog without supports. The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down depending on your requirements and imagination! The…

Downloads
639
Likes
95
Rating
5
P
PrintablesMadRobin13

Dummy 13 Zoro's Katana Sheaths

I created 3 conjoined katana sheaths to replicate the iconic ones used by Zoro in One Piece for the Dummy 13 figure. For more Dummy 13 and One Piece related designs, please look at my other models. I hope you enjoy my designs! :)

Downloads
625
Likes
116
Rating
5
P
PrintablesJace1969

DeathStroke Concept Mask

So many people have suggested these masks would be great for Paint ball and or airsoft ; ) I quite agree, so what better than one with a little attitude. Another evening of trialling modeling free hand, which I'm starting to really enjoy…

Downloads
584
Likes
119
Rating
0
P
PrintablesKNfLrPn

Keychain Chain - Print-in-Place Articulated Flexi Fob - Multiple Lengths

A basic chain intended as a keychain fob but also just fun to play with. Recommended: Print with 6+ walls to give it some weight. It makes it feel much nicer. Make sure your dimensions and elephant-foot compensation are decently tuned.…

Downloads
572
Likes
113
Rating
5
P
Printablesstrasilm

Deathstar table lamp

Starwars Deathstar nigh lamp with RGB LED. There is no hole in the Deathstar for the 8mm LED just in case you want to use the model somehow different or put the LED somewhere else. Just drill the 8mm hole ;)

Downloads
535
Likes
77
Rating
5
P
PrintablesEDnation

StealthScraper - Voron StealthBurner inspired bed scraper

Printing instructions STL is oriented correctly No support required Minimum bed size at current scale = 160mm x 160mm (V0 owner will have to scale down) For added rigidity, use 4 perimeters, 40% infill About 1h print (on a Voron), 22g of…

Downloads
515
Likes
109
Rating
4.94
P
PrintablesAmos491

V-Slot Linear Rails (Various lengths)

These are 40x40mm, 40x20mm and 20x20mm V-Slot Linear Rails. I am working on a project to make a perfect scale model of my Ender 3 Pro, I figured this might be a useful model unto itself. Each rail is uploaded in the following lengths:…

Downloads
507
Likes
127
Rating
5
P
PrintablesOTL3Dprints

starwars Deathstar Candle Mold

just insert wick, snap together, i recommend you use a clamp to hold together, place upside down (wick facing down) pour candlewax into hole Sell my prints commercially by joining my Patreon Join my Patreon to gain access and commercial…

Downloads
502
Likes
116
Rating
0
P
PrintablesGizmoThrill

Hearthstone Box

Replica of the box from Hearthstone. If you add hinges it can be used as an extremely handsome container. The photos shows the prop after the printed pieces have been glued together, seams filled, sanded, and painted. We filmed a video on…

Downloads
501
Likes
363
Rating
0
P
PrintablesJakob Fromm

Oathsworn Tokens and Tiles Boxes

While the provided insert for the tokens is above and beyond what has been provided with other games, I still felt that there was some wasted space beneath the tokens. In addition I felt that trying to fit the tiles beneath the tokens…

Downloads
499
Likes
47
Rating
5
P
Printableswuerfel

Elizabeths Dice

This is a set of RPG dice. Its meant for printing master models, on high resolution printers to make molds off, for resin casting. But they also can be printed in larger scale as decoratives. They're called Elizabeths Dice, because…

Downloads
489
Likes
48
Rating
5
P
PrintablesJace1969

DeathStroke Suit /Armour

Another awesome model from Pepakura.com Unfortunately there was no reference to the original modeller, so no credit available. Please note the sizing will need to be checked to suit your needs and since I have upgraded to a Crealty CR-10…

Downloads
476
Likes
83
Rating
1
P
PrintablesBudwin

DeathStroke Inspired Helmet

DeathStroke Inspired Helmet Enjoy Category: 3D Printing

Downloads
464
Likes
131
Rating
5
P
PrintablesKmech Toys

Titanfall Northstar mech

20cm mech, articulated For PERSONAL USE For commercial license , subscribe to Patreon 7$ https://www.patreon.com/c/KmechToys

Downloads
458
Likes
102
Rating
0
P
PrintablesBen

M2 - M20 Headless Hex Screws in various lengths (incl. STEP)

A collection of Headless Hex screws according to ISO 4026 (DIN 913), ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75…

Downloads
455
Likes
109
Rating
0
P
PrintablesFilliFuu

DeathStar Twist Fidget

Introducing the Deathstar twist fidget, remixed from the original model by tato_713 found here https://www.printables.com/model/57266-death-star-scaled-one-in-two-million A huge thank you to Tato_713 for allowing me the use of his…

Downloads
455
Likes
41
Rating
5
P
PrintablesNecroDavid

Conducting Baton (various lengths)

Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…

Downloads
447
Likes
33
Rating
5
P
PrintablesBen

M2 - M12 Headless Slotted Screws in various lengths (incl. STEP)

A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…

Downloads
438
Likes
128
Rating
0
P
PrintablesBen

M0.8 - M30 Cylindrical Pins / Parallel Pins in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A comprehensive collection of Cylindrical / Parallel Dowel Pins according to ISO 2338 , ranging in diameters from M0.8 up to M30 . Each size is available in a…

Downloads
424
Likes
57
Rating
5
P
PrintablesHonza

Hearthstone Keyring

To wear it on keys just scale it down to like 25-30% in slicer Updated version: V2: The ring is pushed more down into that model so it won't break so easily V3: The hole for the key ring is directly inside the hearthstone itself so there…

Downloads
419
Likes
70
Rating
5
P
Printables3DMason

Articulated Slug - 3 Different Lengths

Articulated slugs from https://www.thingiverse.com/mcsim/designs 3 lengths available from short to super long. Print in place. No supports required. Individual sections are also available for remixes; i.e. head, body, tail. If you like…

Downloads
417
Likes
52
Rating
5
P
PrintablesBudwin

Fortnite DeathStroke Inspired Sword

Fortnite DeathStroke Inspired Sword Enjoy I don't mind if you make and sell my models that's fine, But this can Not be tolerated. If you have a etsy account please leave some negative feedback on this guy.…

Downloads
412
Likes
95
Rating
0
P
PrintablesMiniWorld3D

Smithsonian National Museum of Natural History - Washington, D.C., USA

🇺🇸 Welcome to Washington D.C.! In 2020, MiniWorld3D founder Dany Sánchez visited Washington D.C. and became inspired to recreate the National Mall for the MiniWorld3D collection. Here is the first one, the National Museum of Natural…

Downloads
404
Likes
75
Rating
0
P
PrintablesEcksfactor

DeathStar Magsafe charger stand

I recommend to print both bowls with the flat side down. You may need to sand the posts on the “top disc and posts” STL because they will probably be a tight fit. I modeled the magsafe charger plate to fit this one: https://a.co/d/8yQnzZa

Downloads
400
Likes
88
Rating
5
P
Printables3DontheGO

12 Months of Hair Accessories

I created a years worth of fun hair accessories for something new each month. Many are big enough for a large bun but several are smaller for a small ½ bun or for use as a barrette instead of bun holder. All files should be printed at…

Downloads
397
Likes
230
Rating
5
P
PrintablesJace1969

DeathStroke Helmets Choose your Favorite

Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…

Downloads
385
Likes
64
Rating
0
P
PrintablesSmolboi

V0.2 stealthskirts extended feet

Extended feet for the V0 stealthskirts. Designed for the old V2.4/trident compressor feet but it should work with the new feet. Feet are mounted with an m5 printed thread. Power inlet is modified for the ldo power inlet and may not fit…

Downloads
375
Likes
86
Rating
5
P
Printablestimeball

StageTop Remixed PlayTile - Stone and Grass Paths

Stone and Grass Paths - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. They have a 1 inch grid for D&D, but also have versions without the grid lines. All tiles are StageTop quarter tiles (4" x 4") and tested with…

Downloads
373
Likes
99
Rating
5
P
PrintablesSPRKPLG

Big Viewfinder Custom Housings for 28mm 38mm 42mm 60mm focal lengths

Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…

Downloads
367
Likes
58
Rating
5
P
PrintablesMateusz Tokarz

Wall Plugs Screw Anchors (6mm) | M4-M5 Screws | 5 Lengths

BOM: Printed with ROSA3D High Speed PLA Gray Need a quick fix to hang a small picture frame, a thermostat, or a lightweight shelf? These printable expansion anchors are designed for small household tasks. Designed specifically for a 6mm…

Downloads
362
Likes
163
Rating
2
P
PrintablesAndré

Journeys in Middle-Earth: Shadowed Paths terrain

Component replacement for Lord of the Rings: Journeys in Middle-Earth: Shadowed Paths expansion. File names say how many copies are needed for each. Nest Web and Nest Base are glued together afterwards. I added some webbing on the eggs…

Downloads
358
Likes
55
Rating
5
P
PrintablesKniephaus

Oathsworn Dashboard with Overlay Insert Remix

I really liked both of these designs and wanted to combine them so that you could still slot cards underneath the player board and while also using as little filament as possible. I don't really know true 3d modeling design but I do know…

Downloads
352
Likes
24
Rating
5
P
PrintablesKaaihn

Oathsworn Token and Dice Tray remix, with symbols

I remixed the great tray that Jakob Fromm made to add token symbols to show where they all go, as well as modeling the Oathsworn logo into the lid. The print pictured was printed in PETG at 2.0 quality.

Downloads
346
Likes
32
Rating
5
P
PrintablesMrGeek

DeathStar Apple watch charger

When assembling in to the bottom I put some of my failed castings, some rusty washers and nuts for he weight, and sealed with the lid (maybie sand would better). After that simply glue together, I used a gluegun for that. I printed the…

Downloads
341
Likes
80
Rating
4.33
P
PrintablesThomas Bigoni

Oathsworn Monster Miniature Hex Base with Arrow

Thanks Armand7734 and JMVent. I created this model because the monsters' miniatures of Oathsworn didn't fit in the models previously uploaded here. I made two versions, one with a hole in the center to save on filament and another one…

Downloads
339
Likes
26
Rating
5
P
PrintablesfiveOunceHide

Oathsworn Gameplay Trays

Note: This is currently a prototype. Print at your own risk while I sort out everything. If you do print it, I would love feedback to improve this further. Supports SleeveKings sleeves or smaller Magnet Size (optional): 8x1mm These have…

Downloads
335
Likes
40
Rating
5
P
PrintablesMaHera87

Oathsworn Companion Dashboard

Player dashboard for Oathsworn companions. Each of the 2 base versions comes again in 2 versions, one for sleeved cards (sleeves that come with the game), the other for unsleeved cards. 12/14: added version without token bar

Downloads
333
Likes
34
Rating
0
P
PrintablesBudwin

DeathStroke Arkham Knight Inspired Helmet

DeathStroke Arkham Knight Inspired Helmet Enjoy Category: 3D Printing

Downloads
331
Likes
77
Rating
0
P
PrintablesB3ND

Articulated Dachshund - 3 Different Lengths - 6mm glass eye compatible - No supports required

These little long badger dogs now complete with shiny glass eyes! :) 3 variations provided. They differ in length. All of them use 6mm glass eyes. Files are named accordingly. I printed all 3 of them without supports. Maybe use a brim if…

Downloads
324
Likes
47
Rating
5
P
PrintablesSmolboi

V0.2 Stealthskirts Knomi mount

Knomi mount for the voron V0.2 stealthskirts.

Downloads
307
Likes
40
Rating
4
P
Printablesfermit

GoPro actioncam thumb screw in different lengths

Long GoPro thumb screw, for my floating case . A M5 60mm bolt with hex head needs to be inserted. Screw in an M5 nut to pull in the screw all the way. I added later shorter versions also for 30, 40, 50mm bolts. See download files. Print…

Downloads
299
Likes
20
Rating
5
P
PrintablesRenārs Vilnis

SRAM Level TLM/Ultimate Bleed blocks /w different widths for better lever feel

Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…

Downloads
278
Likes
19
Rating
0
P
PrintablesJuanV

Oathsworn Monster Hex Adapter with Arrow

Thanks user Armand7734 on thingiverse for the excellent model! I just added a little triangle to act as an arrow of where the model is facing (when this is used with standees, might not be clear). Add a filament change command at the…

Downloads
278
Likes
26
Rating
5
P
PrintablesMartin

FPV Motor Wire Protectors - Various Lengths

Simple yet effective motor wire protectors. The protectors sit on top of your motor wires and are secured to the arm of your quad with two zip ties. This saves weight and allows for easier maintenance than wire protectors which go all…

Downloads
272
Likes
25
Rating
0
P
PrintablesBudwin

DeathStroke Black Ops inspired Helmet

DeathStroke Black Ops inspired Helmet Enjoy Category: 3D Printing

Downloads
269
Likes
48
Rating
0
P
PrintablesSM Prints

Raeshalare Deaths Whisper - World of Warcraft Bow

Pulled the Raeshalare Deaths Whisper .obj from the game files and designed a stand for it. I split the bow in half for easier printing then glued after.

Downloads
256
Likes
48
Rating
0
P
PrintablesPatrick Streuli

Deathstar under construction (Episode 6)

2023.10.24: Updated Colors since they were completely out of order. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap…

Downloads
252
Likes
72
Rating
5
P
PrintablesReeslin

DeathStar Light Up Star Wars Bookends

StarWars DEATHSTAR Light Up Book Ends! These are great bookends for my collections. Heavy enough to use with any books and glow with fitted area for standard tea light! 10" tall and 7" wide Enjoy and happy printing! Includes BOTH sides of…

Downloads
251
Likes
56
Rating
0

Ikea 365+ Knife Set Sheaths

This is set of sheaths (small, medium and large) for the Ikea 365+ 3-piece knife set. Printed on a CoreXY printer standing upright with a brim. In this orientation, no supports are needed, but it might not be viable on bedslinging…

Downloads
248
Likes
15
Rating
5
P
PrintablesJace1969

DeathStroke Helmets Choose your Favorite

Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…

Downloads
244
Likes
68
Rating
5
P
PrintablesAsturia

Oathsworn - Coins, Location Tokens and Cubes Storage

Organizer for Oathsworn tokens, coins and other things. Lids have names on them. Remix from https://www.thingiverse.com/thing:5446442

Downloads
242
Likes
27
Rating
5
P
PrintablesInfinytiumVerse

Deathstroke mask

Deathstroke mask. You can scale the mask to fit your head. The file contains two parts for easier assembly.

Downloads
241
Likes
82
Rating
0