Search results: tomo

Sort order

432 models

P
PrintablesBeanarino

Automotive Air Vent Tab

I created this to replace my dads air vent tabs for his KIA Sorento. The alternative was for the agents to replace the whole vent system. These work better than the original part - as the original is a 2 piece clip which is difficult to…

Downloads
152
Likes
10
Rating
5
P
Printablesh2odragon

Procrastinate Tomorrow sign

100x160mm sign, reading "Live today, Procrastinate tomorrow" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…

Downloads
25
Likes
8
Rating
0
P
PrintablesHardworkingDog

Love Window From Tomodachi Life

In the 3ds Game: “Tomodachi Life” when a Mii is in love this icon shows up in their window! I've made 2 other models so far which I've put into a collection so check that out! Also I have been using an Ender 3 Pro for this so I don't know…

Downloads
21
Likes
4
Rating
0
P
PrintablesMartin Kosa

Skládačka automobilu pro robotickou linku

Žáci společně vytvořili návrh modelu automobilu složeného z celkem 4 dílů. Každý tým následně vytvořil a nechal vytisknout 3D model daného dílu. Celý automobil po té sestavil robot z LEGO Mindstorms.

Downloads
13
Likes
2
Rating
0
P
PrintablesHardworkingDog

Friend Window From Tomodachi Life

I used Tinkercad to make this and I don't know if it works with all 3d printers or whatever you're using it for. Feel free to remix it I'm not a huge creator. Hope you have fun with it! -HardworkingDog (P.S. Sorry the image quality sucks…

Downloads
10
Likes
1
Rating
0
P
PrintablesHardworkingDog

Sad/Distressed Window From Tomodachi Life

This model is from the Nintendo 3ds Game: “Tomodchi Life.” I tried looking for these and say no one had made any I decided to make them myself. Right now I'm working on something big right now but my printer is not cooperating so expect…

Downloads
9
Likes
1
Rating
0
P
PrintablesHardworkingDog

Problem Window From Tomodachi Life

This model is like the other one I have made but this time it's the problem icon! I've been using an Ender 3 Pro to print these (I know it's kinda old to some of you) so be cautious when you print this I'm guessing it'll work with other…

Downloads
8
Likes
3
Rating
4
P
PrintablesSpock

Automotive Clip Replacement

Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…

Downloads
4,200
Likes
936
Rating
4.92
P
PrintablesRed Haniwa

Short inline automotive blade fuse holder

Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…

Downloads
3,359
Likes
2,047
Rating
5
P
PrintablesJugernought

Automotive trim tool set

Basic trim removal tool set used commonly for working on vehicles. I printed mine in PETG PRO with extra top/bottom layers and extra walls to increase strength. I would recommend adding a brim so they don't come unstuck and using supports…

Downloads
2,981
Likes
1,030
Rating
4.89
P
PrintablesJosé Pedro

Singer 911 DLS Turbo Road – High-Performance Porsche Restomod Model

The Singer 911 DLS Turbo Road is a masterpiece of automotive artistry — a modern restomod inspired by the legendary Porsche 911 , combining classic aesthetics with cutting-edge engineering . This model faithfully captures the signature…

Downloads
2,537
Likes
508
Rating
5
P
PrintablesBasementLAB

Prying and Opening Tool Flat - Rev.3 - Smartphone - Notebook - Laptop - Automotive

Prying and Opening Tool Flat - Rev.3 - Smartphone - Notebook - Laptop - Automotive Open your tech device and safely remove components with ease. Essential for DIY repairs like displays, batteries, motherboards, headphone jacks, joysticks,…

Downloads
1,333
Likes
150
Rating
4.73
P
Printablestom TTU

push in rivet, pin, clip automotive 6, 7, 8, 10 mm

Step-by-step: Place the insert so that it protrudes from the head side of the pin. Put the pin into the hole. Push the insert until it is flush with the pin’s head. To remove the pin, push the insert inward — the pin will unlock and can…

Downloads
1,284
Likes
330
Rating
5
P
PrintablesMatt Richardson

Automotive Trim Clip Assortment (TPU Only)

These are for TPU only, they don't work well with hard filaments because they are completely ridged if you don't print TPU. These are very robust and will fit most vehicles. I have a bunch of sizes and you can mix and match and just print…

Downloads
1,204
Likes
527
Rating
5
P
Printablesnerg

Spoiler suitable for Husqvarna Automower

My Automower has always lacked a bit of downforce on the rear wheels – so I designed this spoiler. It fits perfectly on the lid without interfering with normal maintenance or service. I highly recommend printing the spoiler with the fuzzy…

Downloads
1,200
Likes
128
Rating
4.5
P
Printablesdavemoneysign

Joy Fidget By TomoDesigns Remix

I found TomoDesign's Joy Fidget earlier today, printed one out and thought I'd try remixing it to fix a couple issues I had. First off, its a great model! Simple printing, easy assembly, novel design on the spiral spring and fun to play…

Downloads
1,190
Likes
251
Rating
4.85
P
PrintablesN3XT3D

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…

Downloads
1,183
Likes
154
Rating
5
P
PrintablesNiko

Automotive trim removal tool / Pry tool

These small pry tools are designed to help you remove plastic trim pieces from your vehicle without causing damage. Using these tools can ensure that the trim pieces come off in one piece. There are two versions of this tool: one with a…

Downloads
1,168
Likes
175
Rating
5

Atomos Ninja V SSD Case

This mod will void your SSD's warranty but makes using them for recording much more convenient. Assembly requires two original screws and three additional M3x8 ones for the lid.

Downloads
962
Likes
136
Rating
4.33
P
Printablesdubmehard

Just do it tomorrow sign

Hello, do it tomorrow fat Jordan sign. Pause in gcode to manually swap filament colour. Thanks for your download, enjoy the print!

Downloads
910
Likes
357
Rating
5
P
PrintablesWill

Inline Automotive Fuse Holder

I've printed this to use inline with my heated bed inorder to add an extra bit of protection for my custom printer. Print both parts add the crimped spade connectors and glue together with acetone. I've used 16AWG silicone wire inorder to…

Downloads
768
Likes
166
Rating
4.83
P
PrintablesDesignCraft

Headrest Hook with Rotating Latch for Cars & Automobiles

A heavy duty headrest hook to keep your groceries, shopping bags, iPad, purse, and more secure in your car or automobile. Features: Heavy duty hook. Rotating latch to avoid accidently knocking the hook from the headrest bar. Instructions:…

Downloads
762
Likes
224
Rating
5
P
PrintablesNassosT

Tool less SSD adapter caddy for Atomos Ninja V (w extra clips for smallrig 2209)

This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…

Downloads
746
Likes
68
Rating
5
P
PrintablesSOLNEZ

Porta Fusible Automotriz para Terminal Aislada

Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por: •…

Downloads
742
Likes
238
Rating
5
P
PrintablesZeroNilNada

Automotive Wire Loom Tool

This is a tool I made to assist in getting wires into the “loom” or wire wrapping in my car. There were tools available online but the cost seemed ridiculous so I designed one for myself. The tool is made in two pieces so they will need…

Downloads
726
Likes
280
Rating
5
P
Printablesgummigroda

Husqvarna Automower Wheel

My mower got stuck in the slopes in the garden in heavy rain with the original wheels. This is a wheel with more grip than the original due to larger spikes. This is a replacement wheel for the Husqvarna Automower that should fits these…

Downloads
725
Likes
53
Rating
5
P
PrintablesGeorge

Business Card Holder - Automotive Wheel (Rim) Display

I designed this for a friend that happens to be a car mechanic with own business, to have something on his desk to put the business cards into :-) Stand includes extra front badge to include your own Logo (possible to multicolour-print…

Downloads
697
Likes
125
Rating
5
P
Printablesdubmehard

Tomorrow problem sign

Hello, tomorrow problem sign. G-code with embedded pause to swap filament color manually. Thanks for your download, enjoy the print!

Downloads
651
Likes
319
Rating
5
P
PrintablesBasementLAB

Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive

Pry Tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive - Strumento di apertura - UPDATED - 05/11/2025 Update Cleaned up geometries for improved accuracy and performance. Fixed functional aspects of the project to…

Downloads
651
Likes
91
Rating
5
P
PrintablesKokoBandit

Automotive push pin

I made this because I lost the pin to one of these fasteners on my motorcycle. I decided to make the entire fastener in case I needed the whole thing. 0.20 layer height 100% infill Brim used on pin print by object instead of by layer…

Downloads
648
Likes
206
Rating
5
P
PrintablesDraizer

Fuse holder (19mm, Automotive)

Safety first, so if you are making any project with high current lead-acid battery you need to fuse it. This design is allow to use holder many times and not afraid about wire/terminal damage. distance beetwen mounting holes - 27mm. Bill…

Downloads
565
Likes
138
Rating
4.67
P
Printablescos cos bobo

Automotive clips

Printed in ABS for use in automotive Print it as it is horizontaly for strenght Fits 7 - 8 mm holes Is better tu use a rubber oring before assembly and to eliminate any play 0.2 mm layer hight 100% infill use supports Use brim for…

Downloads
558
Likes
121
Rating
0
P
PrintablesWotan

Wheel for Husqvarna Automower 305

A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…

Downloads
555
Likes
61
Rating
5
P
PrintablesBasementLAB

Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive

Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…

Downloads
553
Likes
89
Rating
5
P
Printablesjimerb

Sun Visor Extender For Automobiles

Sun Visor Extender Tame the sunrise and sunset sun rays that escape your normal sun visor. Features Easy to use and adjust Goes together in seconds. Fits most visors Can be easily switched to the visor of the passenger side. Or print 2!…

Downloads
522
Likes
73
Rating
4
P
PrintablesBasementLAB

Opening Tool - Rev.2A - Smartphone - Notebook - Laptop - Automotive

Opening Tool - Smartphone - Notebook - Laptop - Automotive REV.2A Resize to adjust dimension 06/11/2026 Added Rev.2A 10/10/2024 Added Rev.2 23/04/2024 Added Rev.1 All our designs are free to download and use. Your support fuels our…

Downloads
520
Likes
63
Rating
5
P
PrintablesFajneDruki

BMW E36 Style Car Silhouette – Flat Automotive Wall Art

This is a flat car silhouette inspired by the iconic BMW E36 , designed for easy PLA printing and clean final results. Perfect for: Garage walls Automotive workshops Home or office decor Gifts for BMW fans The model prints flat, requires…

Downloads
508
Likes
42
Rating
5
P
PrintablesJonweb

Stackable Automotive Fuse holder

Hi everybody, only a "multi remix" of fuse holder stackable with the possibility to mount it in a panel, I liked the original projects https://www.thingiverse.com/thing:1787609 and the remix htps://www.thingiverse.com/thing:1927820, I…

Downloads
507
Likes
86
Rating
5
P
PrintablesDraftYeti

Automotive / Car Fuse Puller

The fuse puller that came with my car (Astra J) broke the first time I used it so I re-created it in fusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament:…

Downloads
472
Likes
55
Rating
4.25
P
PrintablesNeatoBrian

Tomorrowland PeopleMover - Disney Land

Tomorrowland PeopleMover Carriage

Downloads
396
Likes
151
Rating
0
P
PrintablesVitor Ferreira

10mm general purpose automotive clip

There are two types of clips, one to be printed in TPU, for easy removal and reuse. Another made to be printed in ABS or PETG that you can use an M4 screw as a central locking pin. São dois tipos de clipe, um para ser impresso em TPU,…

Downloads
386
Likes
147
Rating
5
P
PrintablesImmBoo

Automotive Clip VW T4 Headliner Holder

Simple and ready to install model of plastic clip used to keep VW T4 headliner in pleace but I guess it could be used in different places and cars.

Downloads
384
Likes
39
Rating
0
P
PrintablesJBoe

Grinding fixture for Husqvarna Automower Safety Blades

Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…

Downloads
382
Likes
51
Rating
5
P
PrintablesCoolBlackCat

Husqvarna Automower 308 Wheel - v.2.0

It is my own desing (no remix). The wheel has been designed to fit an Husquarna Automower 308. Print instructions PETG. The dimensions are set for the cover to hold without glue after treating both parts (wheel + cover) with epoxy (ex:…

Downloads
381
Likes
34
Rating
5
P
PrintablesEl_Gato

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses / Fuse puller

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…

Downloads
370
Likes
24
Rating
5
P
PrintablesZachryWD

Headrest Hook for Automobiles

Anything within your reach. Hang your purse, emergency kits, trash bags, just about anything you'd need within arm's reach. Simple print in place design without the need for additional supports. I recommend printing the file the includes…

Downloads
369
Likes
78
Rating
4.67
P
PrintablesBasementLAB

Fiat Automobiles - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

Fiat Automobiles Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/Scale to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…

Downloads
341
Likes
25
Rating
5
P
PrintablesQuale Gustavo

Atomos Ninja / Shinobi V - Sunhood / without support!

I designed a sunhood for the Atomos Ninja V and Shinobi V. It is printed in two parts and then glued together. The main aspact is the screw to hold it in place.

Downloads
334
Likes
49
Rating
4.75
P
PrintablesTheNewHobbyist

Tomorrowland Transit Authority style vehicle

If you follow my blog or even my uploads here on Thingiverse you may have noticed that I'm a bit of a Disney theme park fan. So it may be no surprise that when I decided to try my hand at modeling something from reference images I chose…

Downloads
314
Likes
95
Rating
5
P
Printablesvakul

Husqvarna Automower front caster wheel

Replacement front wheel assembly for Husqvarna Automower. You will need a set of two 626ZZ bearings (6mm inner diameter, 19mm outer diameter). Axle locker can be replaced by a 6mm star lock washer. If you decide to print the locker, make…

Downloads
308
Likes
28
Rating
5
P
PrintablesSnille

Automower Wire Spike

This "spike" you can use to fasten the guide wire and/or the perimeter wire for your Automower. It only has 3 sides, because I wanted it to be printable sideways (to strengthen the part). But it works very well anyway. The two last…

Downloads
298
Likes
34
Rating
5
P
PrintablesDr.Peter

Husquarna Automower Front wheel replacement

this is still a work in progress. but print with abs, ASA or PETG for best results with adaptive layer Hight. The small part is supposed to pressfit on the axel.

Downloads
293
Likes
27
Rating
0
P
PrintablesMilan Santa

Jednopólová zásuvka s drátem pro automobily

Jednopólová zásuvka s drátem pro automobily

Downloads
292
Likes
80
Rating
0
P
PrintablesLupis1

Maintenance tool for Husqvarna Automover 305, 405X, 415X

Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.

Downloads
285
Likes
24
Rating
5
P
PrintablesScottyPrints

Automotive / Marine fuse & relay box

Automotive / Marine Fuse & Relay Block Printed for the engine bay of my truck, bracket will be self tapped to the inner fender. Relays/fuses not included. used tiny bit of RTV on the contacting edge of the "Panel.stl" Printed "cover.stl"…

Downloads
278
Likes
35
Rating
0

Impossible Tomoe Passthrough Vortex Fidget

Rather small model with forgiving tolerances so most printer should be able to print it. Should print fine at 0.20mm. Please share your makes.

Downloads
275
Likes
25
Rating
0
P
Printables3DPrintoTech

Roue Husqvarna automower 220AC

J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…

Downloads
274
Likes
18
Rating
5
P
PrintablesBert

Tresalto Automotive Trim Removal Tool Holder

Customized the other pry tool holder design to fit my Tresalto pry tools perfectly. Print Settings Printer Brand: FlashForge Printer: Adventurer 4 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: Flashforge PLA Red Notes:…

Downloads
264
Likes
98
Rating
4.5
P
PrintablesCrazy4Lookin

Automotive Cord Wrangler

Are you tired of your charging cable getting in the way of other controls in your car or truck such as the radio or getting caught on the gear shift? Wrangle that cord with the Cord Wrangler. Secure the Cord Wrangler to the desired…

Downloads
260
Likes
130
Rating
3
P
Printablesagent462

Husqvarna Automower 450X Wheel

4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other

Downloads
248
Likes
24
Rating
4
P
PrintablesREMLURELMI

Automotive Quick Disconnect Tools - Fuel Line & HVAC - Six Sizes

These parts are similar to Lisle 37000 or Harbor Freight 63959 . Why buy a set when you can print the one you need? Fitting size is marked on the part. Some complaints about the HF version is that the opening is too narrow, so these parts…

Downloads
243
Likes
24
Rating
5
P
PrintablesAcgames

Sailor Saturn Hotaru Tomoe

Altura Minima Recomendada 150mm Diseño El diseño de este modelo 3D está inspirado en el personaje de Sailor Saturn, Hotaru Tomoe, capturando su vestimenta icónica de marinera con detalles precisos y una posición estática que refleja su…

Downloads
220
Likes
31
Rating
0

Tomos APN 6 air cooler

Tomos APN 6 air cooler, fully printable NO supports All bridging must be no problem

Downloads
219
Likes
8
Rating
0
P
PrintablesRadu Raducu

Automotor CFPV railbus, railcar. La scara TT scale.

Automotorul CFPV. S-au fabricat 3 exemplare, la Astra Arad, inainte de al doilea razboi mondial, pentru o linie particulara de cale ferata din Romania. Si anume Caile Ferate Prahova Valeni (CFPV). Pentru utilizare comerciala sau va rog sa…

Downloads
216
Likes
19
Rating
4
P
Printablestyler

Automotive Mount (17mm ball)

There are a number of different types of devices for automotive use (phone mounts, GPS, backup cams, etc) that connect to a stand using a socket that fits over a 17mm ball. This is a replacement stand for those devices. I made it to…

Downloads
212
Likes
33
Rating
5
P
PrintablesEgorka555

Front wheel Husqvarna Automower 430x

For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…

Downloads
208
Likes
15
Rating
0
P
Printableslunchbox06452

Atomos Caddy iii

I couldn't seem to find more of these that I could use with the Atomos connect on my Ninja V. I can confirm this works with the Ninja Ultra with a Connect module, the Shogun Connect and the Ninja V on a multi cam module as well. I used…

Downloads
200
Likes
10
Rating
5
P
PrintablesTomiKazi

Spare Automotive/RV Fuse Holder

Provides 9 slots for keeping the spare fuses for your car or RV easily accessible and tidy. I printed mine in TPU.

Downloads
196
Likes
49
Rating
0
P
PrintablesDeadparadise

Sunhood for Atomos Ninja/Shinobi V - Single Print Piece

A sun hood for the Atomos Ninja V and Shinobi V that can be screwed into place. Supports are required and it's important that the model's position is upright with the edge of the screw contact point facing down.

Downloads
193
Likes
20
Rating
0
P
PrintablesA.Coval

Box SSD Atomos

simple print suport on the lead for the opening

Downloads
192
Likes
22
Rating
5
P
PrintablesTwirlygrlandMom

Cicada Stained Glass Suncatcher Pendant Necklace - Double Pendant with the opportunity for easy multicolor with filament change, entomology, bugs, insects, moth, nature jewelry, decoration

Double-mounted cicada suncatcher pendant with an easy color change with filament change. We use this as both a suncatcher and a necklace. Here is a link to necklace chains if you need it: https://amzn.to/3vREu9y Enable ironing for a…

Downloads
190
Likes
88
Rating
5
P
PrintablesSkeleton Dan

Tentomon from Digimon

Source: https://www.models-resource.com/pc_computer/digimonmasters/model/5083/

Downloads
185
Likes
19
Rating
0
P
PrintablesModel Magic

Sci Fi Movies - Edge of Tomorrow - 2014

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
172
Likes
30
Rating
0
P
Printableseatstoomuchjam

Atomos SSD caddy for Sandisk Ultra 3D 500GB drive

Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…

Downloads
171
Likes
17
Rating
5
P
PrintablesBigRedBear

3/8 Automotive Air Tool Holder

3/8 Automotive air fitting holder to hold tools such as a needle scaler, air ratchet, blow gun, etc. I made it into a bar to be attached to whatever material you choose. I attached mine to heavy-duty magnets to be moveable from my toolbox…

Downloads
170
Likes
38
Rating
0
P
PrintablesFranktion
Downloads
165
Likes
17
Rating
0
P
PrintablesWill

Automotive fuse

I needed an automotive fuse for a project. so here's one. I've never tried to print one but i'm using it to create a fuse holder for my custom 3d printer. Category: Parts

Downloads
164
Likes
13
Rating
0
P
PrintablesStingrayZA

ATO Automotive Fuse Holder

I hate having to go scratch in a bag or box to find the fuses I need, so I decided it's time to organise. I will post some variations on this design as well. Category: Automotive

Downloads
159
Likes
23
Rating
0
P
PrintablesLars Lietzen

Mitsutomo screw driver holder

Remixed the design to fit screwdrivers instead of a shelf. Works great :-) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Formfutura PLA Category: Tool Holders & Boxes

Downloads
159
Likes
10
Rating
0
P
PrintablesModel Magic

Planes, Trains and Automobiles - 1987

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
158
Likes
36
Rating
5
P
Printablescameron

automotive scrivet

I printed out of pla at 0.2mm layer height. When putting in the new scrivet try not to force it otherwise it will break. This scrivet is designed for an 8mm hole scale up or down as needed.

Downloads
157
Likes
42
Rating
0
P
PrintablesRaymoon

Tomorrowland Keychain 2 Colour

Print this model at best with a 0.4mm Nozzle for best quaility but a 0.6mm works too, Do a colour change in your slicer above height 2mm, Ironing all top surfaces gives you a really clean result

Downloads
157
Likes
8
Rating
0
P
PrintablesTwirlygrlandMom

Cicada invasion earrings - easy 2-color printing with filament change, entomology pendant, jewelry

Fun dangling earrings with two-tone cicadas. Utilize filament changes for color change. We like to print on clear to highlight the details and for some added shine. Size up or down but watch the size of the post hole. You can also make a…

Downloads
157
Likes
78
Rating
0
P
PrintablesRyan

Husqvarna wheel upgrade for automower

print parts laying on their side with hole horizontally using PETG or PLA secure using #10x3/4" pan head square drive metal screws straight into the existing wheel tread profit

Downloads
151
Likes
21
Rating
5
P
PrintablesRadu Raducu

Automotor Malaxa 900 Railcar scara TT

The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…

Downloads
151
Likes
13
Rating
0
P

Universal Automotive 12V Battery Terminal (Large)

This model should fit and protect most 12V car batteries' terminals. If not, please, download, remix, and re-publish!

Downloads
150
Likes
31
Rating
0
P
PrintablesDogInABox

Automotive Differential Demonstration Model

Automotive Differential Demonstration Model This is a 3:1 automotive open differential demonstration model. This type of differential can be found on rear wheel drive cars and allows each wheel to turn independent of one another. I…

Downloads
150
Likes
38
Rating
0
P
PrintablesKubaaa

Case for relay automotive 12V

Case for relay automotive 12V

Downloads
148
Likes
23
Rating
0
P
PrintablesDouglas Hale

120mm PC Fan Duct Adapter to 3" Automotive Air Intake Cone Filter

print with the fan flange against the build plate

Downloads
148
Likes
34
Rating
0
P
PrintablesRenba

Husqvarna Automower Battery Pack DIY

Please like and post your makes ! Why pay $ 120 for a battery pack while you can do it for less than $ 25 ... And using the same brand of batteries as the original ... For : Husqvarna Automower 105, Automower 305, Automower 308, Automower…

Downloads
146
Likes
28
Rating
5
P
PrintablesDanne

Trampoline: Automower stop

To protect the automower from be stuckt at the trampolin.

Downloads
145
Likes
31
Rating
5
P
PrintablesKevyn3D

Tomorrowland led sign

Best to use black en white PLA for the best result, but other colors are possible. Load the TMLBlack and TMLWhite files as a single object an flip it with the logo faced to the bed. Don't forget to buy me a beer :)…

Downloads
142
Likes
27
Rating
5
P
PrintablesAsh

Atomos Ninja V / Shinobi 5" Screen cover

Atomos Ninja V / Shinobi 5" Screen cover

Downloads
138
Likes
21
Rating
5
P
PrintablesBob B

Automobile Coin Holder

Tired of chasing coins around your vehicle? I got tired of digging change out of the storage tray in our car so I came up with this little coin holder. It is designed to hold nickles, dimes and quarters so they can easily be accessed…

Downloads
138
Likes
20
Rating
5
P
PrintablesModel Magic

The Mouse of Tomorrow - Mighty Mouse - 1942

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
136
Likes
27
Rating
0
P
PrintablesLD.P

Automower - Husqvarna approximation

This is a toy automower (robot mower) loosely modeled after the Husqvarna 430X. My young daughter is a huge fan and we do the neighborhood tour to look for them everyday back from daycare. I thought I'd print one for her but found no…

Downloads
131
Likes
9
Rating
5
P
PrintablesOmphteliba

Atomos Ninja 5 Cover

When the cover is attached, the threads and connectors on the side are still accessible.

Downloads
129
Likes
30
Rating
0
P
PrintablesMatt Goodson

Pen and Business-Card Holder - Stacked Tires Automotive

This is a pen and business-card holder designed to look like a stack of three tires with a fourth leaned against it. I printed mine using the following print settings: 0.08mm layer height 5 walls 15% infill No supports

Downloads
127
Likes
15
Rating
0
P
PrintablesRenba

Husqvarna Automower Heavy Duty Charging Station Screws

Hi ! Here are Heavy Duty replacement Screws intended to secure the charging station to the ground. Print in PETG or ABS because PLA is biodegradable Fill 100% You dont have allen key adapted ? Don't matter, use the Hex side of a bit…

Downloads
127
Likes
16
Rating
0
P
PrintablesHanke

Tomorrowland 2022 stage

Tomorrowland 2022 Reflection of Love stage. Let me know how it prints and if any changes are made!

Downloads
126
Likes
2
Rating
0