Tornado Tube Asthma Inhaler Spacer
Modified the Tornado Tube the Asthma Inhaler Spacer from https://www.thingiverse.com/thing:4370483 to work with Round Inhalers.
- Downloads
- 193
- Likes
- 33
- Rating
- 0
484 models
Modified the Tornado Tube the Asthma Inhaler Spacer from https://www.thingiverse.com/thing:4370483 to work with Round Inhalers.
El reemplazo perfecto para los tornillos de marca kreg, para usar tornillos comunes y más económicos en las uniones de bolsillo.
Logo de Funko perfecto para imprimir a 0,20 de capa con un 15 % relleno en PLA Actualización 10/01/2025 he arreglado el modelo para que no tenga problemas de impresión al imprimir con la corona y con la F
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for one variant
Učitelé či studenti vytisknou sady kostek s rozdílnou vnitřní hustotou a rozměry. Žáci pak kostky zváží a změří, dopočítají objem a hustotu a seřadí je od nejhustější po nejřidčí.
The Panavia Tornado saw service in the RAF from 1979 right through to 2019 before it was totally phased out to make way for the Eurofighter Typhoon I grew up seeing this aircraft flying overhead in pairs and low through the Scottish…
Support me on Patreon Follow me on Category: Other
This is Tornador vacuum cleaner connection to suck up the dirt thrown up directly. The front neck is 12.5 degrees slanted and rotatable. V6 v12 is 15 degrees. you need only one of them. V6 12,5deg or V12 15deg The vacuum cleaner…
Vortex Bottle Connector - Tornado in a Bottle this is a standard pet bottle connector and demonstrate a vortex in your classroom! Show that in order for water to flow down, air must flow up. These amazing connectors screw onto two plastic…
A tornado inspired plant pot! - Let's hope that's the only moment your plants encounter a tornado! Used Filament: This model was printed using FiberSilk Silver from Fiberlogy. The FiberSilk series is one of our favourites! The print…
Hace unos años un familiar me pidió una tuerca de Métrica 18 y paso de 2 mm, ya que se le había roto la bomba de achique del barco. Tras buscar tuercas en Solid Works y no encontrar la de Métrica 18 y paso 2 mm, decidí construirla desde…
Quick 3D model of TIV 1 I made 3D Printable, the mesonet is removeable so if you want it or not.
This is based on the badges worn by defense attorneys from the Ace Attorney series such as Phoenix Wright. I modelled it off of the image used in the more recent games in the series.
he Tornado Tower Fidget is a mesmerizing 3D-printed toy made from two flexible, star-shaped sections. Twist, stretch, compress, and rotate the stars to create a flowing tornado form with satisfying movement and constantly changing…
Tornado Foosball Guy A foosball replacement guy based on Tornado brand foosball tables. If you plan to use this on a foosball table, print with a large percentage infill with a strong material. These guys take a lot of abuse. Tornado…
A classic science tool to let you trap a vortex and observe it forever. Fill one bottle with water and screw on the adapter. Screw on another bottle. Put the water filled bottle on top and give it a little twist of the wrist and watch the…
This adapter is used to join two PET bottles together to form a water tornado. Fill one bottle with water and then use the adapter to join the bottles. Flip the bottles over like an hourglass and give the top bottle a bit of a shake in a…
This Nozzle helps diffuse the powder exiting the Eastwood PCS-250 powder coating gun giving a more even cloud of powder. Prints straight up with the fins down.
I started with the bottle threads from https://www.printables.com/model/155891-pet-bottle-water-pipe-quick-coupling and drew a vortex connector around them. It works well and seals pretty well too.
I found that a few of the other designs were difficult to hold onto while wet, so adjusting if there was a spill became a pain. I designed mine with some grip and a center funnel down to 15mm that doesn't require supports on a decently…
¡Bienvenidos a Panamá! Welcome to Panama! With its unique shape and rising over the landscape, the F&F Tower , also known by the locals as El Tornillo (the screw) is one of the most iconic buildings of Panama City. Its total height is…
This is a coupler for joining two soda bottles to make a tornado (reference: https://www.wikihow.com/Make-a-Tornado-in-a-Bottle). There are three models: Coupler, short—use this on its own, and tighten the two bottles to each other.…
Útil para la medición de tornillos y tuercas desde M2 hasta M10
This is a Nelson and Murdock Attorneys at Law sign that I designed and printed back in 2016 and finally got around to sharing and finishing. This is from Daredevil Season 1 on Netflix. Make sure to share your builds! Would love to see…
Creality Ender 3 users please read last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when steppers…
About the Panavia Tornado The Panavia Tornado is a family of twin-engine, variable-sweep wing multi-role combat aircraft, jointly developed and manufactured by Italy, the United Kingdom and Germany. There are three primary Tornado…
This is a modification using openscad to allow for magnets to be used to hold the base and the storm together. The STL i created fits magnets that have a a radius of 5mm, and thickness of 2mm. you can always customize it yourself. Making…
Fits .125" diameter and .063" disc magnets
Este diseño es uno de los ejercicios de nuestro nuevo curso de diseño 3D avanzado con Fusion. Info del curso aquí https://control3d.net/curso-de-diseno-3d-fusion-nivel-intermedio/ Suscríbete aquí https://control3d.net/registrate/ Tornillo…
It includes the Doppler on wheels, Tiv 1-2, and the Dominator 1-3.
soporte para destornilladores skandis
Fillament Spool Holder with Fillament runout sensor attachement. This was designed for my Artillery Sidewinder X-1, but should fit a range of 3D printers. It attaches to 2020 and 2040 aluminium extrusions. Specially designed for those…
X Belt Tensioner Upgrade for Ender 3 Pro and Tevo Tornado using stock hardware. I've only printed and tested on ender 3 pro. Printed the slider flat to avoid layer adhesion failure when tensioned. Not my model. All credit to Misterguru .…
Cambiado la zona trasera de acople a la pared, ahora disponible para atornillado 2 tornillos a 40 mm entre ellos. SE ha mejorado la distancia y ahora mas pegada a la pared, entra perfectamente el cable,
The Panavia Tornado Air Defence Variant (ADV) is a long-range, twin-engine swing-wing interceptor aircraft developed by the European Panavia Aircraft GmbH consortium. It was a specialised derivative of the multirole Panavia…
BMG V6/Dragon directdrive mount CR10/Ender3/TevoTornado V2 added Remixed from the most rugged, solid and best performing direct-drive mount, credits for the original design goes to @VykkuF ( https://www.thingiverse.com/thing:3747412 )…
nozzle 0,4mm layer high 0,2mm 2 wall 15% infill without supports
This is based on the badges worn by defense attorneys from the Ace Attorney series. It is only really shown in the Miles Edgeworth Investigations series, where it is explained that most prosecutors choose to just carry it in their pocket…
This is a simple connector to join two 2-liter bottles together to make a Tornado Tube experiment for your kids. Fill one of the 2-liter bottles with water, connect, swirl, watch the tornado! Instructions Steve Spangler Science sells…
PLEASE DO NOT SELL OR CLAIM THAT THIS IS YOUR MODEL!!!! I MADE IT AND IT TOOK ALOT OF EFFORT AND WORK! anyways I really enjoyed modeling this. It taught me a lot about shapes and how to model said shapes. BTW I made this on a Chromebook…
Mango Destornillado para llave hexagonal de ¼ fija no removible. El destornillado o manguita va clavado es la idea q sea fijo.
Dwayne “The Rock” Johnson Necklace / Ornament. This is a remix of the original here . Please leave a like and post your makes!
I used BMG extruder from Trianglelab, with their 22mm Nema 17. For TMC2208 driver, I set Vref 0.65V. To assemble it, you will also need some M3 brass inserts. Bltouch offsets: define X_PROBE_OFFSET_FROM_EXTRUDER 25 define…
This Tornado bottle connector can be attached to PVC bottles Printmaterial: Doesn't matter as long as it is waterproof Printer: Prusa mini ( it fits on every printer) Sopports: I haven't printed it yet so I can't tell but it should work…
“Roads? Where we're going, we don't need Roads!” This is my first Hybrid Hueforge, so let me know what do you think about this project. I Used Elegoo PLA and PLA+ from my old printer but you can use different. For the Hueforge, (0mm -…
I made this Tornado mesh in Blender for all to use. You can use this in games, animations, or whatever you want. Credit will be appreciated. Happy Printing!
Reimagination of my old Business Card Holder this one uses a center core instead of a ring so the position of the cards should be more regular. Includes Version for 24 or 18 cards - pictures are shown of the 24 card version. Standard…
This bottle coupler fits the latest fizzy drink thread standard: PCO-1881, which can be found at https://www.bevtech.org/threadspecs-downloads.asp . It is designed to fit: 2 x BS1806 #215 O-rings. which have the following dimensions: CS:…
This bottle connector allows you to join two plastic bottles together, creating an exciting vortex effect. Fill one bottle with water, attach the connector, and invert the bottles so the water-filled bottle is on top. Shake it, and watch…
This prints cleanly with no supports in PLA on most well tuned printers at 0.2mm layer height. Due to ABS shrink you may need to size up 1% or so to get the proper fit with the top and the launcher. Untested with PETG, as that plastic is…
“Gotcha” Apollo Justice's cherished and consistently worn bracelet. It tightens on his wrist when when a witness displays nervous habits, however this one is just a prop for cosplay. Fits a wrist 3" (or 76mm) in diameter. The two sides…
embellecedor para tornillos. trim for screws. Con fecha 3 febrero 2020 pongo la version 3 que es el embellecedor pero con rosca para que agarre bien.hay que sacar el tornillo de la pared, seguidamente meter el tornillo por la rosca y…
A small model i made in tinkercad. use plastic cement to glue on the mesonet.
I made this Tornado mesh in Blender for all to use. You can use this in games, animations, or whatever you want. Credit will be appreciated. Happy Printing!
A summoned storm that will twist you to death. DND Hostile monster. Check out all my Minis! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A remix based on the kmccon user model .All thanks to him. Haven't you ever gone to the hardware store to buy screws and not being sure of their size? For me at least, yes. With this design you can carry the measuring tool in your wallet…
es una caja enumerada con 8 compartimentos para organizar los tornillos a la hora de desmontar aparatos eléctricos. sus paredes son de 1mm de espesor. Quería una caja para cuando desmonto aparatos eléctricos o electrónicos organizar los…
Disclaimer: it has very steep overhangs. I was able to print it on bambu x1 without supports, but bottom surfaces are not very good. Still looks cool to me. This is a part of my experiments with generating STL models via Python. See…
My version of Spool Holder, may be used in various printers with standard top rack 20x20. Screws needed: DIN912 Hex socket head cap M5x18 (x2); or M4x18 (x2) - look for other stl file!
limpiador de tornillo de eje Z version 1 puede imprimierse en PLA o en Petg ,es recomendable sostener el tornillo al encastrarlo para limpiar y en su interior colocar servilleta de papel o un trapito finito para limpiar , muy efectivo.…
This prints really easily in PETG or PLA. I have confirmed that it work son 2L Pepsi and Coke bottles (USA). I have not tested other brands. print solid. 3-4 outside walls Directions Fill one 2L bottle ¾ of the way with water. Add food…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Spinning top which howls like an F5 tornado. How long can…
This is a printable (no support required) toolhead to adapt a Volcano hotend to a Tevo Tornado using a BMG extruder in direct configuration. I also have the Prusa Mk3 style duct added to the system, as well as a BLTouch mount. In order to…
the WORKING T128 I tried my best to get the horns right since it has a goofy aah horn. you will need glue to put together use a N20 motor for rotator. slip ring: Comidox 12.5mm 300Rpm 6 Wires CIRCUITSx2A Capsule Electrical Slip Ring for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made this Tornado mesh in Blender for all to use. You can use this in games, animations, or whatever you want. Credit will be appreciated. Happy Printing!
A summoned storm that will twist you to death. DND Hostile monster. Check out all my Minis! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A 2" swirly extrusion indicator with built in filament change (M600 - without a MMU). I recommend Black for the first color, then red, orange, or anything bright. Two 8mm magnets are glued together, then to the back (in a magnet recess).…
Cable chain for the heatbed of the Tevo Tornado, it might also work with the CR-10 but I did not test that. I switched from my anet a8 to the tevo tornado and I missed the cable-chain for the bed. Especially because there is no…
Here is the “hardest to print” dice tower…i believe. It is designed like a tornado that absorbs many dices. I saved only the tornado dice tower and the tower with the dices together, because i do not know what is needed for multi material…
This is my version of the Y axis Linear Rail mod for the Tevo Tornado. You only need to drill the two center mounting holes in the aluminium bedplate. Hardwear: 2x MGN 12H 400mm linear rails…
Español: Clips para sujetar cables de forma segura en paredes, escritorios o cualquier superficie. Disponibles en varios tamaños para ajustarse a diferentes diámetros de cable. Los agujeros permiten fijarlos fácilmente con tornillos,…
As far as I'm aware, Tevo never released the STL for their full bed test print that arrives on the Tornado. Since I wanted to print it with my own settings, I created this simple model. Print with zero top & bottom layers, three…
Einfache Abdeckung für eine Berg Tornado Lenkrad, falls das alte spröde geworden oder verloren gegangen ist. Das rote Berg Logo pass in die neue Abdeckung.
El modelo esta hecho en dos piezas una de ellas (la que sostiene el tornillos) se puede imprimir en PLA o ABS, mientras que la otra (cilindro que se poene en el destornillador) deve ser impresa en TPU, de esta ultima hay 3 con medidas…
Simple tornado design for weather enthusiasts
According to legend, Krishna's maternal uncle Kansa, called Trinavarta the Tornado Demon, to kill Baby Krishna. Kansa made Trinavarta aware of the powers of Little Krishna. Trinavarta assured Kansa that he has the magnificent power of…
This is my version of the X axis Linear Rail mod for the Tevo Tornado. WARNING: USE THE (X_MOTOR_MOUNT_PULLEY) if your also installing the Z linear rail mod. The size and spacing of the motor mount has been adjusted for the Z Linear Rail…
Este gabinete de 100x50x50 mm ha sido diseñado específicamente para proyectos electrónicos que requieran una carcasa compacta, funcional y fácil de imprimir. El modelo está optimizado para impresión sin soportes al colocarlo con la base…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
The Mark of Zorro - Zorro (Tyrone Powers) with Tornado - 1940 3D printable model.
This is a custom siren! It's a dual tone 2001 siren, the chopper port is a 4/6, but if it was a real siren it would be 8/12. You could print the chopper model with the ports separated and could be glued together, or the chopper model that…
Tornillos de tipo m3 de 20mm para piezas
[EN] You can find the description in English below [ES] Tapones para Pocket Hole Estos tapones para pocket hole son la solución ideal para ocultar de manera limpia y profesional los orificios de los tornillos en tus proyectos de…
My remix only changes the idler so that it only puts force on the bearings inner race and leaves a gap for the rest of the bearing to spin freely. I didn't change any other part of the design. Category: 3D Printer Parts
Pequeño gancho para colgar cosas, con 4 agujeros de 4 mm
Mango para juego de puntas de destornillador de 4mm. Tiene una largura de 12cm. y posee un imán para la correcta sujeción de las puntas. Medidas del imán 2mm grosor x 10mm de largo x 5mm de ancho.…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Connects two 2-liter bottles to allow you to make a Tornado. Thread fittings are the US standard 2-liter bottle threads, PCO28 1881. Should fit other bottles with a nominally 28mm OD and a 2.7mm pitch. Originally designed to use a -020…
By redesigning with FreeCAD, you can fit this holder into your sewing thread spools on your coverstitch machine, Babylock, etc. SHA256 checksum 8c31f2c0218e9d22fff83981654d53168124faf3a69c68335307313f5cc1c333 torneio.FCStd…
.4mm nozzle. Try outer wall first. Helps with clearance. Be sure to post your makes!
For printing, I used natural PLA from Bestfilament.
This model is compatible with the lego system.
Pata y tornillo compatible de los muebles de baño IKEA Fullen. No tiene regulación de altura pero tiene el tamaño correcto, se puede poner junto a las originales regulando la altura de las originales.
con capa 0.2 y capa superior e inferior 3