Search results: tramm

Sort order

98 models

P
PrintablesEdward

Trammel Ruler

A tool to make straight lines along a straight edge at an offset. Easy print. See orientations below Fully customizable Fusion 360 and STEP files included. Printing There are two options for the slide and head as I have included a layer…

Downloads
410
Likes
207
Rating
4
P
Printableseveve05

3 way trammel

Parts: base handle stone x 3 pin x 3 Assembly: put pins in stones put stones into their tracks put handle on pins check if everything moves freely connect handle with pins, you can use glue, I used a soldering iron set to 120 ° C (for…

Downloads
258
Likes
109
Rating
4.75
P
Printablesmrelwood

Qidi Plus 4 macros: Fast start, Safe Y moves, Manual tramming, etc...

## APPARENTLY THE FAST_START MACRO DOESN’T WORK WITH QIDI BOX. FW 1.7+ can also cause issues. Sorry. ## ## NEW in v3.5: PRINT_START_COOL to circumvent the common heat based Z issues. ## There's a lot to improve in the stock Plus 4…

Downloads
1,141
Likes
102
Rating
5
P
PrintablesJohnOCFII

CNC Tramming Tool

The CNC Tramming Tool is a simple 120mm object with two holes – 1 for a ¼" end mill, and the other for the 8mm shaft of a dial indicator. It is used to tram your CNC to ensure the router/spindle is as perpendicular to the build surface as…

Downloads
677
Likes
83
Rating
5
P
PrintablesRick Tucker

Creality K1 Bed Bed Spacers for Manual Tramming

This is a simple spacer I used to allow for manually tramming the Creality K1’s bed. and I greatly reduced my bed mesh variation to around 0.1. I have tested this for about seven months now. That includes printing ABS many times with a…

Downloads
591
Likes
110
Rating
5
P
PrintablesV1 Engineering

Makita 700 CNC Tramming Tool

Fit a screw in the end and snap it on the collet nut of your router. Give it a spin and see which way your router is leaning. Usually you would want to shim the router to get it pretty close, for most people 1mm or less off with this tool…

Downloads
581
Likes
70
Rating
5
P
Printablesstixpjr

Trammel of Archimedes (nothing grinder)

Mathematical toy mechanism: https://en.wikipedia.org/wiki/Trammel_of_Archimedes Fully articulated model drafted in Onshape: https://cad.onshape.com/documents/d659bd7bc2d1aa257044b19d/w/c36c7990b68ed0b7e594a5ae/e/fd8c4be747739989452cc2a9…

Downloads
456
Likes
88
Rating
5
P

CNC Spindle Trammming Dial Test Indicator Holder

NOTE: YOU NEED TO MIRROR THIS FOR THE 2nd SIDE. A simple holder, you can use a ¼" or 6mm steel rod or upside down end mill to hold it in your spindle and then clamp the dovetail of your test indicator to it as well. Best to position the…

Downloads
416
Likes
42
Rating
5
P
PrintablesKameo

Qidi plus 4 - Bed tramming wheels

The original Qidi plus 4 doesn't provide a way to easily adjust the bed knobs. I designed a wrench but proper wheels are better I find.

Downloads
365
Likes
66
Rating
4.67
P
PrintablesThomas

CNC tramming tool, metric

just another tool to tram your cnc spindle to the table, using metric tools and heat inserts

Downloads
365
Likes
38
Rating
5
P
Printablesbreese-2

CNC Router Tramming Tool

I needed a longer bar than John's original to allow the dial indicator to clear the Z-axis mounting plate on the X-axis. I also wanted to secure the router bit and dial indicator, so I split the ends of the bar and added holes for screws…

Downloads
336
Likes
26
Rating
5
P
PrintablesSOME Studio

Compliant Bed Leveling/Tramming Tool for Bambu X1C P1P P1S

Presenting a specialized Bed Leveling/Tramming Tool designed exclusively for Bambu 3D printers! This tool easily slips onto a cool hotend, providing a hassle-free solution to level or tram your printer bed accurately using a compliant…

Downloads
277
Likes
70
Rating
4.5
P
PrintablesEmkatech (Mike)

Beam Compass / Trammel, Adjustable Circle Drawing Tool for Large Diameters (tramel)

Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…

Downloads
262
Likes
69
Rating
0
P
PrintablesEchoDeltaMike

Tramming Tool for CNC

Square the router / spindle to your spoilboard or workpiece (assuming they are flat). Requires these parts: Two of these dial indicators a (bit of) 6mm metal rod . How to use: Insert rod into your spindle / router and tighten. Gently…

Downloads
260
Likes
41
Rating
3.5
P
PrintablesW3asel

Do Nothing Grinder/Trammel of Archimedes Fidget

Turn the crank and the glides move back and forth in their channels, never colliding, but also doing nothing. This fidget is based on the Trammel of Archimedes , which is a mechanism that traces the shape of an ellipse (which can easily…

Downloads
256
Likes
47
Rating
4.6
P
PrintablesNukler

Ender 3V2 Bed leveling/tramming + mesh gcode

Bed leveling/tramming+create mesh .gcode for Ender 3V2 by Teemo3D | PRINT3D GIFTS Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Notes: Bed leveling/tramming+create mesh .gcode for Ender…

Downloads
223
Likes
11
Rating
5
P

QIDI Plus 4 - Bed tramming tool

The tool is split into two parts: one for adjusting the bed and the other for holding the lock nut. Both parts have markers spaced at 30° intervals, which correspond to 5 minutes in the ‘hour:minute’ format used in Fluidd calibration.…

Downloads
197
Likes
34
Rating
5
P
PrintablesBennet Peters

Useless Machine (Trammel of archimedes)

This was created using Fusion360 and it's rendering feature. On the top of the “Sliders” are holes to put M4 screws (with washers) into. They are there to hold down the “Handle”, so that ist doesn't fall of when in use. They have a…

Downloads
194
Likes
46
Rating
5
P
Printablesgeodave

Remix of Trammel of Archimedes

5/24/2018 I changed the files a little to make them more flexible in scaling to a 75% scale. I also added some extra M8 & M6 Nuts with 2 different tolerances in case my default .4mm tolerance is too tight for you. The full size version…

Downloads
173
Likes
38
Rating
4.67
P
PrintablesMiguel M.
18+

The source marked this model as adult content.

Downloads
159
Likes
59
Rating
4.8
P
Printablesharbormaster

Trammel Beam Compass V2

This is an updated version of the trammel based on suggestions I received from Bassposauist . It adds a scale and is a little more compact. Another suggestion was to use the knob designed by ItsAzuurfor_ for a M4 hex head bolt…

Downloads
142
Likes
31
Rating
5
P
PrintablesV1 Engineering

DeWalt DW660 CNC Tramming Tool

DW660 perpendicularity tester A more perpendicular tool cuts better! Tramming tool. Print instructions Unassociated tags: dw 660, mostly printed cnc Category: Parts

Downloads
130
Likes
23
Rating
0
P
PrintablesMSB

Adjustable Yardstick Trammel Points

I set out to make a yardstick adjustable trammel set using as many parts 3d printed as possible. I hope to make another version using some standard hardware, but this one only requires 1 nail, with the rest all printed. The set consists…

Downloads
128
Likes
33
Rating
0
P
PrintablesLCSteve

CNC Tramming Arm for Dial Indicator

This tramming arm is designed to hold a 6mm router bit in one end and a dial indicator in the other in order to well tram a cnc or similar bed. The dial indicator in the original was quite a bit smaller than mine and so I needed to…

Downloads
122
Likes
17
Rating
5
P
Printablesmikeneron

Bed Leveling (Tramming) Circle

Print this to live tram (level) the bed on your 3D printer. I like to heat up the bed first and then adjust the bed knobs by eyeball so it's close. Then print the large circle and make minor adjustments as needed on the fly as it's…

Downloads
118
Likes
7
Rating
0
P
Printablesharbormaster

Trammel Beam Compass

This beam compass (trammel) is used to scribe a circle or arc, by using a sharpened point at one end and a lead pencil at the other. The radius can be adjusted by sliding the pencil holder across the tool’s beam, and locking it in place…

Downloads
117
Likes
17
Rating
4
P
PrintablesJohnMartin

Gridfinity - CNC Tramming Tool (SST 1/4" Shank)

4x3 Gridfinity Holder for the Stupid Simple Tools (SST) 1/4" Shank Tramming Tool.

Downloads
99
Likes
9
Rating
5
P
PrintablesCleverB

Tramming gauge , use with Digital Caliper bed level

Semi Auto Bed Leveling :) As you can see , with this i was able to level the 4 bed corners easily. The design is separated into 3 printed parts. the attachment to frame - current design works well on Ender 5 - feel free to remix to suit…

Downloads
95
Likes
13
Rating
4
P

9 Point Square Bed Leveling / Tramming

This bed leveling file created 9 circular points across the bed and also created squares. This helps to level/tram your 3d printer bed X and Y. This tests for 1st layer thickness while creating the 9-point circles and also adhesion while…

Downloads
94
Likes
1
Rating
0
P
PrintablesAdr1an

Trammel fo Archimedes

The "Trammel of Archimedes" is a mechanical device that creates an elliptical shape using rotating rods. It's named after Archimedes, though his direct involvement is debated. It demonstrates how an ellipse is formed by maintaining a…

Downloads
94
Likes
21
Rating
0
P
PrintablesM7 Designs

CNC tramming arm

CNC Tramming tool. I printed something similar from here by ex-nerd a long while back it worked okay but the rod holes were a bit wonky for the rods I used. So I modeled this from scratch in Fusion the way I thought it should be and…

Downloads
88
Likes
8
Rating
5
P
Printablesmikeneron

Bed Leveling (Tramming) Squares

These are for the CR-10, but you could use the small square file and multiply it to have 9 and then move them to each spot manually in your slicing software. You can adjust the bed on the fly as it prints or wait until the print is done…

Downloads
83
Likes
2
Rating
0
P
PrintablesSergeBakharev

Carvera Spindle Tramming Tool

Use this tool to hold a Dial Indicator with a 3.178mm endmill in the Carvera spindle. This works with both the Original Carvera (C1) and Carvera Air. A shorter version of the tool (65mm) works on the Z1 Using this tool you can rotate the…

Downloads
80
Likes
13
Rating
5
P
Printablesrjtwin

X-Carve 1/4" CNC Dial Indicator Tramming Mount

Basic dial indicator mount for 1/4" collet CNC. Included is an STL and a DesignSpark Mechanical file. STL has been exported in mm. I got the inspiration for this design from: https://www.thingiverse.com/thing:5436030 Category: 3D Printing

Downloads
76
Likes
3
Rating
0
P
PrintablesRandyS

Trammel Points

Trammel points for larger circles. Limited only by the steel rule you use. I found I needed to more frequently draw and cut out larger circles and arcs than I have templates for and which are too large for my drawing compasses. The radius…

Downloads
75
Likes
16
Rating
5
P
PrintablesJohnMartin

CNC Tramming - Glass Levelers

Shims are difficult to use and inaccurate compared to these glass levelers for tramming your CNC router. There are sizes for up 5, 6, 7, and 8mm thick glass or whatever flat surface you use to level. Print 4 and make sure for anything…

Downloads
69
Likes
21
Rating
0
P
PrintablesFavmir

Optimized Tramming (Bed Leveling)

Features Spiral Pattern : Lets you check your level twice! Easy to remove : You can pull off the entire print by just lifting one corner! How It Works Starts printing from the outside, advancing towards the center. Adjust your bed during…

Downloads
64
Likes
5
Rating
0
P
Printablesnttwo

Archimedes Trammel

An Archimedes trammel, which does literally nothing but looks cool I guess. Also fun to play around with. Makes a good desk toy. Print Settings Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 15% Filament: SUNLU PLA+ Black and Yellow…

Downloads
63
Likes
7
Rating
0
P
PrintablesKutilman Yuri

CNC mill tramming tool for 6mm or 8mm rods

I made a tramming tool for CNC mill for anyone that has 6mm or 8mm rods available. Here is a video on what and how it's used for: Distance between center and center is 150mm on both versions, which gives 300mm diameter of the measured…

Downloads
61
Likes
1
Rating
0
P
PrintablesSnowHead

3-Way Trammel of Archimedes

I enhanced the " Trammel of Archimedes " by Madox to a three-way-version to realize the same functionality (nothing) with a bit more effort. It's drawn from scratch too but I tried to keep his design. The slider is unmodified and uploaded…

Downloads
61
Likes
20
Rating
4
P
Printablescrashkg

Gridfinity SST Tramming Case

I printed this out of PETG and TPU on the Prusa XL. It fits the ½ inch tramming tool very tightly. I chose to leave the top layer off because I liked the look of the TPU and PETG mix and also the gyroid infill. Happy Printing!

Downloads
59
Likes
7
Rating
5
P
PrintablesErik

Manual bed leveling and tramming aid

This model helps with tramming (leveling) the bed of your printer, as long as you have the turning knobs under the bed. This model can also be used for adjusting z offset for the perfect first layer, depending on how you slice it. This is…

Downloads
56
Likes
7
Rating
0
P
PrintablesDominik

Trammel of Archimedes – Three Sliders

Mechanical motion demonstration model This model demonstrates a Trammel of Archimedes with three sliders , a classical kinematic mechanism used to generate elliptical motion using constrained linear movement. By rotating the central…

Downloads
53
Likes
7
Rating
0
P
PrintablesBilliam

Millright Mega V tramming collar

A collar with two screws to help with adjustments while tramming the router. Print instructions Note: I have abandoned this collar, and the stock router mount. It's here if you need it, but I'm not recommending it :) Instructions: If your…

Downloads
50
Likes
5
Rating
0
P
PrintablesDr.Enchanted

Lowrider 3 Tramming straps for Makita

Three rotationally adjustable tramming shims. One large 2.25mm, Medium 1.7mm, and Small 1.2mm. K, It’s kind of a pain to adjusting the tram on the LR3 so… Print two Core straps of your choice along with two each of each size of shim.…

Downloads
50
Likes
12
Rating
0
P
PrintablesMuffelkraft

IMPROVED CNC Tramming Arm for Dial Indicator (M6, No threaded inserts & No supports)

2 M6 nuts and screws needed, min length of screw = 20mm. 6mm or ¼” endmill needed for fixing in spindle No supports needed

Downloads
50
Likes
6
Rating
0
P
PrintablesCrafter64

Trammel of Archimedes

Print in place using supports as “touching buildplate only” to support the handle. Use thick walls of 1.6mm.

Downloads
49
Likes
6
Rating
0
P
PrintablesSam

Trammel

This is a 3D printed rendition of woodworking trammel that can draw circles up to 5 3/4" (about 140mm). Original wooden version of this can be found here https://www.pinterest.com/pin/229965124709474743/ You would also need a 1/4" by 2"…

Downloads
44
Likes
4
Rating
0
P
PrintablesRowdypheasants

Useless machine/ Archimedes trammel

Insert sliders into the horizontal slots on the body. slide the squares into the vertical slots on the ends of the body. put the arm on the ends of the siders. add the clips on the top of the arm on the slider.

Downloads
44
Likes
2
Rating
0
P
PrintablesJohnnyDawg

Tramming tool for CNC Lowrider (open source)

Tramming tool for a CNC eg Lowrider. Designed for use with 2x6mm bits. Source file included in case you want to modify. No supports needed

Downloads
43
Likes
0
Rating
0
P
PrintablesDik Harrison

MK3 Bed Tramming (Leveling) Tool - FreeCAD

Although I rarely move my printer (it is in an enclosure), I find that the bed frequently requires re-tramming. I'm guessing that is because of the “frog” warping over time. For years I have tried to use a tool that I modified from the…

Downloads
42
Likes
7
Rating
4
P
Printablesbernieke

Makita 700 CNC Tramming Tool - double height

Made the tramming tool higher (by doubling the holder part, including the end stop) as the bottom of my nut is equal with the tool holder, preventing the tool from rotating to the back. Printed with 15% gyroid infill, 5 top/bottom layers,…

Downloads
42
Likes
3
Rating
5

Tramming bar and standard indicator block

Tramming bar and standard indicator block. The standard indicator block is use to get a glass sufrace flat, then the tramming bar is used to when adjusting the router. See this video for tramming instructions. Link to the Harbor Freight…

Downloads
41
Likes
4
Rating
0
P
PrintablesJoebus

Kobalt Tramming Tool

Tramming tool to fit Kobalt router on the Lowrider3 CNC.

Downloads
39
Likes
6
Rating
0
P
PrintablesJohn Stillwell

Tramming Blocks for Longer LK5 Pro with Dual Z Axis mod

I added a second z screw and motor to my Longer LK5 Pro hoping to get better stability on tall prints. As a side effect the X gantry needs constant tramming. This would not be a big deal if we had individual motor controllers. In this…

Downloads
38
Likes
6
Rating
0
P
PrintablesSean Liang

Trammel of Archimedes I

My take on the Trammel of Archimedes as a simple little fidget toy. I designed it to be as minimal and straightforward as possible, with an easy click-in assembly and a decorative pattern to give it a bit more character. It prints well in…

Downloads
35
Likes
5
Rating
0
P
Printableshamed sh

8 way trammel

8 way trammel useless grinder

Downloads
28
Likes
5
Rating
0
P
Printableshugabaloo

Dewalt 611 CNC Tramming Tool

CNC Tramming Tool remixed from V1Engineering to fit the Dewalt 611's spindle nut.

Downloads
27
Likes
1
Rating
0
P
PrintablesThe3dprinter

archimedes trammel (the useless invention)

None of the parts require support and should be done in around 3 hours but can be sized up and down. Should be smooth but if needed you can sand down the blocks. Works great and does not jam.

Downloads
27
Likes
4
Rating
0
P
PrintablesJohn Chiesa

Crank Piston toy - Trammel of Archimedes

I saw this model made in wood many years ago. I couldn't find it online, and frankly, I couldn't think of what to call it. If anyone knows the original designer, please let me know and I will give him credit. Anyway, I remembered the…

Downloads
26
Likes
2
Rating
0
P
PrintablesDream

3D Trammel of Archimedes

Explore the genius of Archimedes with our 3D model of the Trammel of Archimedes—an intricately crafted digital marvel. Witness its dynamic geometric movements and elegant precision as it traces captivating curves. Ideal for mathematics,…

Downloads
24
Likes
2
Rating
3
P
PrintablesAlan Lowery

Tramming tool

This simple tool can asist in measuring the amount of z axis tilt away from perpendicular with respect to the x & y axes of a cnc router. It has a 1/4" (6.35mm) shaft which can be insesrted into the collet of the router. Then just slowly…

Downloads
22
Likes
2
Rating
0
P
Printablesmschmitt

A tramming/leveling test pattern

The rings allow layer height to be reliably measured using a caliper's depth gauge. They alternate between 0.2 mm and 0.4 mm, in a checkerboard pattern. The connections between the rings are for easy removal of the whole mess from the…

Downloads
21
Likes
0
Rating
0
P
Printablescyrillink

6m or 1/4 CNC Tramming tool holder

This is a tram tool holder, which I designed while tuning my Milo 1.5. It uses one M3 heat insert to hold the tools in place. If you use the arm, you’ll need an additional M5 heat insert. I recommend using tree supports, although they’re…

Downloads
19
Likes
3
Rating
0
P
PrintablesTadej E.

Yet another tramming tool

Just did a quick retrace of original and change mount so that you can use M8 bolt. And because people wanted step i provided it :) edit: LOGO is not on the model… That was for me only :)

Downloads
18
Likes
1
Rating
0
P
PrintablesDave K

Story stick version of yardstick trammel

The modified pivot piece can be printed without supports and attached to the cone with a short piece of 1/8" dowel. I used PLA, but any filament should work. As in the original, you can use a ruler that is the proper thickness or, a strip…

Downloads
18
Likes
0
Rating
0
P
PrintablesDaniel

4 rod Trammel of Archimedes

Designed it after watching some YouTube videos while at uni. I was curious how easy it would be to model in CAD, and after some messing around came up with this, it is a flawed design which can fall apart quite easily and has not been…

Downloads
18
Likes
3
Rating
0
P
Printablesgrosdode

Trammel / large compasses

To build it you need: one M6 x 20mm grub screw but you can also use a normal M6 screw and make it pointy with a drill and some sandpaper one O ring (14 x 2.5mm or 17 x 2.5mm) to hold the pen (or a other rubber band) one stick 10mm x 20mm…

Downloads
17
Likes
3
Rating
0
P
PrintablesHank

Cylindrical Trammel - Dual Self Reversing Travelers

PLA / 0.3-mm layers/15% gyroid infill/2 perimeters Recommend using brims for Pins & Axel and using organic supports for Travelers Assembly per graphics

Downloads
16
Likes
4
Rating
0
P
PrintablesPcManny

Frontrammer

RC-Car Carson Virus 4.1/4.0 Frontrammer

Downloads
15
Likes
1
Rating
0
P
Printables3D_Cre8or

Turny Handle Thing (Trammel of Archimedes)

I honestly have no idea what this should be called. I know it's been done before and I know it's nothing new. I just wanted to finally make one....whatever it is. Plus it's pretty satisfying once you make it, put it together and make a…

Downloads
14
Likes
3
Rating
5
P
PrintablesUncle_Hambone

Extended Base for Trammel of Archimedes

I made the base taller by 10mm so you can grip it better without your fingers getting in the way of operation

Downloads
14
Likes
6
Rating
5
P
PrintablesAllister

Motor trammel tool

Use this a point to level the motors on any drone with round arms. I made it for the X500v2 but it will work on anything.

Downloads
12
Likes
0
Rating
0
P
Printablesdrandolph

Replicator Tramming Gauge for digital guage

I combined the best of two worlds I took the mounting hole from http://www.thingiverse.com/thing:23257 that uses the Pittsburgh (Harbor Freight 93295) Digital Indicator and I modified http://www.thingiverse.com/thing:27025 to hold it.…

Downloads
12
Likes
0
Rating
0
P
Printablesdjimenez

Archimedes Trammel

ues it for fun

Downloads
12
Likes
1
Rating
0
P
PrintablesPete Jensen

Bed tramming using tyre tread measuring tool

I used one of the tyre depth gauge stls and modified it to fit the X3S fan shroud so that I could use it as a bed tramming tool. Links to original models below. I cut the arms off the digital gauge, added a loop to the top for pulling it…

Downloads
12
Likes
3
Rating
0
P
Printablesmichael samuels

Tight CNC Tramming Tool

The original was to loose for me so I made it tighter by tapering it. Insert drill bit from bottom as the hole goes from the original 6.6mm to 6.35 mm. Insert Dial indicator from top as the hole goes from original 8.2 mm to 8 mm.

Downloads
10
Likes
1
Rating
0
P
Printablesjkoether

XL Tramming/Bed Leveling Jig

I have noticed my bed occasionally gets a significant left/right slope; you can tell by how much rotation is happening when printing a straight line in the X-direction. There isn't a great way to set both sides to the correct height and…

Downloads
10
Likes
2
Rating
0
P
PrintablesT Hohn

Simple Nothing Grinder (Trammel of Archimedes)

Simple Nothing Grinder or Trammel of Archimedes Was designed in FreeCAD as practice with “real” cad software MAKE SURE to orientate the “peg” so the it’s not so akward, probably a mistake in how I designed it in freeCAD, sorry.

Downloads
7
Likes
1
Rating
0

Tramming Tool for the LowRider 3

This tool has a 1/4" shank and is inserted into the chuck of the router. The shank will likely need to be sanded to ensure a straight fit in the chuck. I have used this tool to tram my LowRider 3. After tramming with this tool, I was able…

Downloads
7
Likes
0
Rating
0

Kp3s Pro v1 Bed Tramming Caliper Holder

Works well with my Hoteche 284315. It’s easily adjustable using the SCAD file. Printed with 3.2 layer height.

Downloads
7
Likes
1
Rating
0
P
PrintablesWayne Peterson

Trammel of Archimedes

This is a trammel of archimArchimedesedes, or do-nothing machine, or BS Grinder. It can be printed with removable pins or with solid pins that you insert through the handle and glue into the piston rods, just make sure you leave enough…

Downloads
6
Likes
0
Rating
0

Tramming Adjustment Blocks

Tramming Adjustment Blocks Use 2 x 10-24 Tee nuts from the backside for the adjustment screws to go into. Category: 3D Printer Accessories

Downloads
6
Likes
0
Rating
0
P
PrintablesPavel Novák

Trammel of archimedes

Design Concept This model appears to be inspired by the Archimedes' mechanism for drawing an ellipse. It's designed in a simplified way to focus on the mechanical functionality. At the end of the mechanism, there is an option to attach a…

Downloads
5
Likes
0
Rating
0
P

Trammel of Archimedes — Do-Nothing Machine Fidget

Trammel of Archimedes — a "do-nothing machine." WHAT IT IS This is a completely useless, completely satisfying desk fidget. Crank the knob and the arm sweeps around, tracing a perfect ellipse over a groove engraved in the base. It does…

Downloads
4
Likes
0
Rating
0
P
PrintablesSuperkitty999

Trammel Of Archimedes

Trammel Of Archimedes

Downloads
3
Likes
1
Rating
0
P
PrintablesHank

Trammel w Handle

A way to pass some time. PLA/0.3 mm layers/3 perimeters/15% gyroid infill Note: The knob on the handle will spin once freed up after printing. If necessary, protect the know with tape or paper towel and carefully use plyers to make rotate.

Downloads
2
Likes
1
Rating
0
P
Printablesbrimstone326

Trammel of Archimedes (Ellipsograph/"Do Nothing Machine")

I was looking at mechanical devices to apply to my Tectonic game and I like the function of the Trammel of Archimedes (also called an Ellipsograph). These are often posted as "Do Nothing Machines", but it is a misnomer. It's a device to…

Downloads
2
Likes
1
Rating
0
P
PrintablesMarcin G

2020 Profile Trammel Gauge / Frame Diagonal Measuring Tool.Uchwyt pomiarowy na profil 2020 do przekątnych ramy

EN: A simple and effective measuring gauge designed to slide on a standard 2020 aluminum extrusion profile (V-Slot / T-Slot). Perfect for checking and transferring diagonal frame measurements (e.g., during welding, automotive bodywork, or…

Downloads
1
Likes
0
Rating
0
P
Printables

Trammel / large compasses

To build it you need: one M6 x 20mm grub screw but you can also use a normal M6 screw and make it pointy with a drill and some sandpaper one O ring (14 x 2.5mm or 17 x 2.5mm) to hold the pen (or a other rubber band) one stick 10mm x 20mm…

P
Printables

Beam Compass / Trammel, Adjustable Circle Drawing Tool for Large Diameters (tramel)

Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…

P
Printables

Tramming Tool for the LowRider 3

This tool has a 1/4" shank and is inserted into the chuck of the router. The shank will likely need to be sanded to ensure a straight fit in the chuck. I have used this tool to tram my LowRider 3. After tramming with this tool, I was able…

P
Printables

Motor trammel tool

Use this a point to level the motors on any drone with round arms. I made it for the X500v2 but it will work on anything.

P
Printables

Kp3s Pro v1 Bed Tramming Caliper Holder

Works well with my Hoteche 284315. It’s easily adjustable using the SCAD file. Printed with 3.2 layer height.

P
Printables

Trammel of Archimedes (Ellipsograph/"Do Nothing Machine")

I was looking at mechanical devices to apply to my Tectonic game and I like the function of the Trammel of Archimedes (also called an Ellipsograph). These are often posted as "Do Nothing Machines", but it is a misnomer. It's a device to…

P
Printables

Story stick version of yardstick trammel

The modified pivot piece can be printed without supports and attached to the cone with a short piece of 1/8" dowel. I used PLA, but any filament should work. As in the original, you can use a ruler that is the proper thickness or, a strip…

P
Printables

3D Trammel of Archimedes

Explore the genius of Archimedes with our 3D model of the Trammel of Archimedes—an intricately crafted digital marvel. Witness its dynamic geometric movements and elegant precision as it traces captivating curves. Ideal for mathematics,…