My Little Pony Twilight Sparkle
Twilight Sparkle from TV serial My Little Pony model has extra support for tail Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm
- Downloads
- 1,287
- Likes
- 108
- Rating
- 5
203 models
Twilight Sparkle from TV serial My Little Pony model has extra support for tail Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm
This is a remix from: https://www.thingiverse.com/thing:2808346 where I personalized the 30 foot radius circle for the specific spell - Twilight Sanctuary for the Twilight Domain Cleric. In the original file, the model was too tall and…
I made a magnet from pictures of ponies from PonyTown game. No multimaterial needed just overlaying several layers of different filament colors. Print instructions filaments order: Prusament Vanilla White Prusament Gallaxy Purple…
This is a wall anchor for an Umbra Twilight curtain rod (tested on the Double Blackout version) with wider 32 mm spacing between the screws. Design features This is designed to fit into the slot on the curtain rod where the manufacturer's…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🎉 Hey Adventurer! 🐉⚔🧙♂ If you love this 3D model – you're just scratching the surface! 🌟 🔥 The full collection from this series (and tons more!) is waiting for you over on my Patreon :…
This is an organizer for the board game Twilight Imperium 4th Edition and its expansion Prophecy of Kings. It is a remix of my previous organizer ( https://www.thingiverse.com/thing:4534520 ), so you can keep the already printed faction…
This is my take on TI4 organization including Prophecy of Kings. As with all my inserts, my goal is to minimize setup and teardown as much as possible while keeping the contents snug and protected from jostling. All files were printed…
A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…
I felt inspired to create a giant war sun dicetower. It is just barely small enough to fit on the bed of an ender 3 - you can scale it down if you want to print it on something smaller. I split the war sun in half to print each part flat…
This handy dandy organizer/player tray stores in the original box, with card decks in the larger side. Snap off the lid, easy access to your organized chits. Check out my TS: Red Sea organizer that fits on a card. Keep in mind there are…
Here is yet another Legend of Zelda Key, this time from Twilight Princess. I always felt that the TP boss key looked the best compared to the other versions. It captured the feel of the game while looking really sick on its own. If you…
Recommended to play around with scaling to achieve proper fit. The fit should be snug, however not too tight to damage the card.
I know... this is yet another organizer for the infamous TI4 but I felt like most of the existing ones had great ideas but none combined all the parts that I liked. So I went ahead and took inspiration from some other inlays and created…
I found a design to make strategy card holder for TI4 (www.thingiverse.com/thing:3309442), but after printing it found that it had a few flaws. Namely, it used some cards to support others - so once some were gone, others would fall out…
Only found in Twilight Princess, this key appears multiple times in each dungeon. After finding one of these keys, you can advance into the next room. The model isn't full scale. Scale it up around 200~300% for the real thing. Print with…
This is Hrein's model for TI4 and the Prophecy of Kings expansion with some modification by me. The description is copied directly from Thingiverse with my changed in bold. The excess space left in the models by Hrein allowed me to modify…
What is it? This is a modular stand for technologies cards from board game called Twilight Imperium. A single stand is designed to hold all 4 cards (or 6, if you play with cards from expansion) of one technology type. Multiple stands can…
Petite modélisation du bouclier de Link, dans Zelda Twilight Princess, de Wii, dans une version porte-clés. . Merci Nintendo ! Personnal design of the Link's shield, from Z Zelda Twilight Princess, de Wii, on a keychain version. Thanks…
Petite modélisation du bouclier de Link, dans Zelda Twilight Princess, de Wii. Merci Nintendo ! Personnal design of the Link's shield, from Zelda Twilight Princess, on Wii. Thanks Nintendo !
Description: This is a solution for creating a more stable map for your game of TI4. It consists of six milty draft shaped sections, that holds the pieces of the map and one center piece for MR. Appart from making the map stable, it also…
Flagship Player model from TI4
This is a work in progress, but hosting the portion i've done so far. I've made the base structure have quite thin structural pieces so you should hopefully not use infill but just perimiters which will make the print speed much faster.…
This frame will keep the galaxy together. If you are playing on slick table, you can even drag/slide the whole galaxy around as if it was a single board. The fit is snug but it does not damage the hexes (of course) The pieces are 2mm…
Another silly experiment for the strategy phase
I love this game so much and my game group have an annual championship of Twilight Imperium, so I decided to make something special for the winner to take home as a souvenir to remember the epic battle and achievement of being “Galactic…
This is a working replica (and a remix of a Clockspring design) of the Mystic Seer from the original Twilight Zone series https://en.wikipedia.org/wiki/Nick_of_Time_%28The_Twilight_Zone%29 Print instructions Here is a link to the Seer in…
The original ring of this model was taken from a Stargate model and has a bit too much superflous detail for the size it is printed on in my opinion (and always resulted in suboptimal prints for me). Which is why I designed a simpler…
Player unit for a Dreadnaught from TI4
I wanted a tighter fit between the segments so I redrew these. They're made for a 58.75mm hex so there is about 2mm of total play in any direction. Not enough to allow the tiles to move much, but enough to keep them from binding. The…
Recommended to play around with scaling to achieve proper fit, around 103-105% should be ok. The sign should not be too tight to avoid damaging the strategy card. The two different pieces need to be glued in together.
Print both models normally, as you would with any other model, and then drill out a small hole where you want the ship to attach to the base. I designed it this way, so that you could customize where the ship is, and you can change its…
Faction boxes for Twilight Imperium Each box holds: Command Tokens Control Tokens Home System Hex Faction Tech Cards Faction Home Planet Cards Faction Promissory Notes Faction Agents Card Faction Mech Card There is enough open space in…
Fighter player unit for TI4
Need to be tested with sleeved cards. Start by printing a little faction box and a big faction box, and maybe a card holder. Should be good, but I never tested it. I've added 2 faction box lids for sleeved cards wich are very high…
Player spacedock unit for TI4
This handy dandy organizer/player tray stores in the original box, next to the deck of cards, and one on top of the cards. Snap off the lid, easy access to your organized chits. The 5 column has 5 through 8. I'd love to see your…
Player unit for the Destroyer from TI4
Since a Twilight Imperium play is a rare holiday i came with idea to reward a winner with na Trophy (Cup). I design one for that and print int before any play. Including 2 versions with "Twilight Imperium Winner" inscription engraved and…
Carrier player unit from TI4
Made from scratch, but from an idea seen here : https://www.printables.com/model/1313628-technologies-cards-stand-for-twilight-imperiumhttps://www.printables.com/model/1313628-technologies-cards-stand-for-twilight-imperium I've added the…
Ground force unit from TI4
Cruiser player unit from TI4
First version of a trophy for our playgroup. The top was scaled 500%, the bottom 498%. I plan to make STLs that have the correct scale for everything, and a template of some sort to generate a name-plate for the plaque. Category: Toy &…
This is an organizer for the board game Twilight Inscription. It supports vertical storage and sleeved cards (very thick premium sleeves for the smaller cards might not fit if the height of the stack is more than 27mm). I also added a…
The wormholes have threads that print flat and screw in to the bases. I wanted a mechanism that wouldn't come lose when picking the wormholes up, but that wasn't permanent so you could disassemble them for easier storage. The screws &…
This is the Triforce from the Legend Of Zelda series. Each part has the goddess symbol, character, and character name in each part. Link contains courage and is in the bottom right. Zelda contains wisdom and is in the bottom left. Lastly,…
Update 2026-05-25: Since some of you asked to provide these boxes also for Thunder's Edge. I decided to upload a .3mf file with a label on the side which you can modify and use the text you want. Instructions: 1. open the…
We like to set out the player control tokens in turn order each round in our TI4 games to keep everything flowing smoothly. This little holder keeps them upright and visible so you can easily keep track of who's turn it is. there's also a…
This is a remix of Saunick's Twilight Imperium 4th Edition (TI4) war sun unit for FDM printing. https://www.thingiverse.com/thing:4191414 I found that the original model was too small for durable, usable fdm prints so I made an effort to…
These exploration tokens are very thin and should be quick prints. I recommend printing with 0.4mm nozzle, 0.2mm layer height, and swap colors at 1.2mm. Cultural: Blue Hazardous: Red Industrial: Green Add them to planets at the start of…
I wasn't fully satisfied with the existing solutions for organizing TI4/PoK so have cobbled together my own version with some additions (they are all great but didn't scratch my itch). This solution will hold TI4 + PoK + Codex I & II. The…
For each token, print two halves, an aligner peg, and a base. Use the peg to help align the two halves when gluing them together. I recommend first printing the pegs & bases in a single color, then printing the token halves with a color…
This is an organizer for the boardgame Twilight Imperium 4th edition ( TI4 ) and both expansions Prophecy of Kings and Thunder's Edge. It adds about 3cm lid lift to the box but provides some good organization and quick setup. It supports…
Technologies Cards Stand for Twilight Imperium, stackable. STEP file included
I made this crown a loooong time ago using EVA foam and a laser cutter, so I recreated it with a 3d printer. Basically extrude, and went at it with a sculpting brush :D. It is not 100% lore accurate, more of a stylized version; but it…
Frontier tokens for TI4+PoK by orangetruth using a remix of the base/stand from TheTrustedFlumph so that the frontier tokens basically match the look of the wormhole tokens also created by TheTrustedFlumph. The base/stand is a remix of…
Chit boxes - for Twilight Struggle Deluxe ed. (mine is 2019 7th printing)
Twilight Zone_ The Movie - Nightmare at 20,000 Feet - 1983 3D printable model.
Just a little box to store the strategy cards for TI4. Should have about 1mm of play for the cards. Print instructions Category: Games Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 5%…
The Twilight Zone - Twilight Zone Collage - 1959 3D printable model.
(Work In Progress!) After one too many galaxy-quakes messing up the map, I decided to try my hand at creating a frame to keep the tiles together. The goal was to create a frame that lets me attach additional accessories as I come up with…
I recommend printing at 0.2mm personally.
One of my silly experiments for the strategy phase.
The Twilight Zone - 1959 3D printable model. Easy to print, just size it to your needs and go! This is a large model and will take a long time and a lot of material to print.
Quick remix of the token holder's in ZombieTwiglet's TI4+PoK organizer, since I felt I needed to put the rest of my cardboard tokens in something nice instead of having them be the only things left in a zip-lock now. Take note that the…
A new version of the TI4 trophy inspired by the War Sun model from EKWorks. This model requires the use of supports. I used organic supports, and the final result turned out very well. In the photo, you can see how many supports there…
Twilight Zone_ The Movie - Uncle Walt's Hat Trick - 1983 3D printable model.
I enjoy doing comissions and this was requested by a friend, make sure to print with supports and you will need to print 5 thorns. If you have any issues, reach out, the is 0 tolerence between the pieces to allow the block to pressure…
Printing the bottom upside with tree supports actually gives better results but does take longer to print and more materials. Print 2 copies of the hinge file, a 1.75m filament will fit in the hinge well, meld it to the outer hinges for…
My Distant Suns tokens for TI4/TI3 edition. With tokens from TI3 expansion. List and number of tokens (source boardgamegeek.com): Base Game / S.E. expansion Automated Def. System 0 / 3 Biohazard 4 / 0 Fighter Ambush (1) 0 / 2 Fighter…
Background The boxes in this are scaled for both the base game of Twilight Imperium, the expansion Prophecy of Kings, and the first three codices. Each box is also scaled for sleeved cards. Each card box lid has a snap to ensure it stays…
I had printed the original boxes and liked them but on my first one I had an issue with the thin walls on the lid and lip. I went and thickened the walls so the total thickness is 4mm. This makes the thin parts 2mm. Since I was redrawing…
Thank you @tuppari_425927 for allowing us to remix the model! All credits go to @tuppari_425927 , I just added the slot for the naalu 0-token! Also see his other neat designs! 103% scale was a good fit for me It seems I can't export the…
This is meant to serve as the base of a large Twilight Imperium trophy. The base also comes apart to serve as storage for a winner's fleet. It also has a spot for a deck of cards (we used the yellow cards) and one extra spot for dice or…
Mongolian woman - Breathe of the Altai Twilight
This is a first version of spacers for creating a symmetrical map for 5 players for Twilight Imperium 4th edition. I know hyperlanes work fine mechanically, but I never liked the psychological aspect of fake distance. With these spacers,…
A supportless printable articulated dragon. I had some issues with joints fusing together during printing, but that was most likely due to print problems and not the file. UPDATE: It was issues with the file, but I fixed it and added a…
lithophane Poster Legend of Zelda Twilight Princess Nintendo Gamecube Wii Voici un lithophane d'un magnifique artwork sur le thème de Legend of Zelda Twilight Princess de Nintendo Gamecube Wii. Faites vous plaisir ! This is a lithophane…
Twilight - The Baseball Scene Collage - 2008 3D printable model.
A remix of Saunick's ground-forces model from Thingiverse (https://www.thingiverse.com/thing:4191414) to print the token in two pieces (flagpole and base). I did this since I could not for the life of me successfully FDM print the unit in…
An organizer for the boardgame Twilight Imperium 4. Specifically for the Creuss Faction, which has an unusually shaped homeworld. This container can contain all pieces related to the faction. Print instructions Turn on supports to print…
3D printable figure of Link from The Legend of Zelda: Twilight Princess. Includes character equipment and clothing details modeled for 3D printing. Category: Creatures
Hello tribe, I have moved all my easy print designs over to https://thangs.com/u/187535 I have 4 versions of this tank in easy print configuration Cheers Maker Millwright Category: Vehicles
2.5D recreation of the logo used on the Twilight Zone pinball table backglass
Organize your public objectives and scoring in Twilight Imperium 4 - now with a token track for easier tracking! Now you can see how many points everyone has without crowding up the score tracker board. This model was designed with 0.2mm…
More coming soon I have other components that will be added, soon :tm: Player Component Boxes Each item (Lid, Body, etc) should be a single assembly. Everything has a “LayerN” value. This is the order in which the items need to be put in…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
The planet fits tight in the stand upcale it 2-3% to make it more looes.
After a game of Twilight Imperium where the map tiles kept getting pushed around slightly and making the map a mess, I wanted a solution to keep the map together neatly. So I learned some basic Fusion 360 and made this design to hold TI…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Command Counters: 1.8mm tall, which is .2mm taller than then real command counters, but it allows for more layers in the middle between the ship and symbol side. The indentations on each side are each .6mm deep. If you want to do two…
I had a few requirements for what I would consider the "perfect organizer" for myself. Having not found the exact mix of what I was looking for on any free files, I ended up repurposing some components I had printed for my TI4+POK…
Iconic Twilight Zone Characters - Bob Willson & The Gremlin - 1959-1964
Inspired by a Reddit thread where someone stole their poor daughter's Duplo bricks, I set out to come up with a clear time-saving way for everyone to always see what the rest of the round had in store. This is still a work in progress.…
Took some time with this one but i created a cross cut print key of the Boss Key from Twilight Princess, just print with supports and glue the two halves together or use the cylinder tabs if the print is on the larger size. Place the pins…
Iconic Twilight Zone Characters - Henry Bemis - 1959-1964
Layout heavily inspired by the original. Redesigned using OpenScad, messy Source File included. Made parts interlocking with blanks and tabs and added an outer ring. It is a very tight fit, adjust size if needed. Print 1 center piece 5…