Search results: tze

Sort order

1,553 models

P
PrintablesNieuniknione

Brother P-Touch TZ TZe label tape organizer

This is a modification: https://www.thingiverse.com/thing:5146836 The original was too tight and the cartridges did not fit. I printed 0.3 (because I wanted it fast), but 0.2 is better. Tape 6mm = Tape 9mm = Tape 12mm. PLEASE SEE MY OTHER…

Downloads
1,125
Likes
202
Rating
4.84
P
PrintablesMaYo

Cigarette holder with activ carbon filter - Zigarettenspitze

ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…

Downloads
881
Likes
87
Rating
5
P
PrintablesmoWerk

Planter Dish / Plate (Blumentopf Untersetzer)

18cm inner diameter (188mm outer) planter dish to put below planter or cover pots to collect and evaporate excess water. 140mm and 159mm inner diameter versions added. A variation with higher rim has been remixed by @FabianBaumeis_972452…

Downloads
877
Likes
56
Rating
5
P
PrintablesKlaus

Bodenschoner für Biertisch / Festzeltgarnitur (floor protectors for folding table)

Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…

Downloads
700
Likes
39
Rating
5
P
Printableshangbar3d

Yahtzee IN A CUP

Prints easy, no supports needed. Uploaded also a Yahtzee scoring form you can download. pencils are not included in the kit

Downloads
424
Likes
65
Rating
5
P
Printableskjrps

Cat stencil ruler, template / Schablone für Katzen-Silhouetten

Das Originalmodell war für den FFF-Drucker zu filigran und zu schwierig zu drucken. Ich schnitt viel unwichtige Bereiche weg und skalierte es auf 140%. Drucken Sie bitte unbedingt mit +0.5mm x-y-Compensation. Jetzt hat es die nötige…

Downloads
390
Likes
65
Rating
4.8
P
PrintablesMiniWorld3D

Chillon Castle - Switzerland

🇨🇭 Welcome to Switzerland! The Chillon Castle ( Château de Chillon ) is a medieval castle built on a small island near the eastern end of Lake Geneva, south of Veytaux in the Swiss canton of Vaud, near Montreux and Villeneuve. Chillon is…

Downloads
336
Likes
44
Rating
5
P
PrintablesMatty

Blumentopf Untersetzer klein ( Pflanzenanzucht )

Der Blumentopf Untersetzer ist geeignet bis 93mm Topfgröße, kann aber auch nach belieben vergrößert oder verkleinert werden. Ideal geeignet für die Pflanzenanzucht zb Tomaten.

Downloads
265
Likes
11
Rating
0
P
PrintablesStefan Skotty

Katze mit Wollknäuel

Verspielte Katzen-Silhouette als Wand- oder Fensterbild. Ideal für Katzenliebhaber und moderne Wohnräume. Leicht und stabil – perfekt zum Aufhängen oder Verschenken.

Downloads
218
Likes
18
Rating
0
P
Printablestom

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…

Downloads
216
Likes
25
Rating
5
P
PrintablesPeter Farell

Soft Pretzel

Soft Pretzel

Downloads
181
Likes
19
Rating
5
P
Printableskjrps

Zigarettenspitze / cigarette holder, Mundstück

Lesen Sie im Internet über die Vorteile einer Zigarettenspitze. Diese hat keinen zusätzlichen Filter, daher ist das Modell auf alle Bedürfnisse skalierbar. Die Druckkosten sind nur wenige Cent. Diese Zigarettenspitze ist speziell für die…

Downloads
162
Likes
9
Rating
4
P
PrintablesLean 3D

Brother's P-Touch TZe label printer tape organizer

Height: 20 mm 6 bays for standing: 16.5 x 4 - 28.2 x 2 6 bays for laying: 16.5 x 4 - 28.2 x 2 5 bays for standing: 16.4 x 3, 22.4 x 1, 28,4 x 1 6 bays for laying: 16.4 x 3, 22.4 x 1, 28.4 x 2 Which tape size fits which bay: 16.4: 6 mm, 9…

Downloads
143
Likes
25
Rating
5
P
PrintablesHaggiwatt

sitzender Mops / sitting pug

Stützen anbringen, wie immer beliebig skalierbar Attach supports, as always freely scalable

Downloads
138
Likes
11
Rating
0
P
PrintablesLars Brockmann

Topographic map - Bern, Switzerland

!! Print at 3x scale, else tolerance will be incorrect !! The following datasets were used: height model: swissALTI3D landscape model (Buildings): swissBUILDINGS3D 2.0 Steps: Combining the height model and the landscape model into a…

Downloads
124
Likes
31
Rating
5
P
PrintablesJhannes

Cat door for flyscreen / Katzenklappe für Fliegengitter

Simple aber effektive Katzenklappe für ein Fliegengitter an der Terassentüre. So kann die Katze im Sommer, wenn die Terassentüre offen ist, problemlos rein und raus, ohne dass das Fliegengitter im Weg ist. Einfach mit PLA drucken und dann…

Downloads
119
Likes
27
Rating
5
P
Printableseof

Bookends / Buchstützen

Two small bookends with Voronoi Pattern.

Downloads
116
Likes
14
Rating
5
P
PrintablesHaggiwatt

Spardose oder Küchendeko sitzendes Schwein/Money box or kitchen decoration sitting pig

beliebig Skalierbar, Druckeinstellungen je nach belieben. Scalable to any size, print settings as required.

Downloads
111
Likes
7
Rating
4
P

Katzenspielzeug Türme

Hallo, ich habe hier dieses Katzenspielzeug für meine Katzen entworfen. Ich habe es auch schon meinen Mainecoon's vorgestellt. . Abhängig davon wieviele Leckerlies es sind und ob die Katzen schon mit etwas ähnlichen gespielt haben kann es…

Downloads
104
Likes
19
Rating
0
P
PrintablesBouggo

Brillenständer in Katzen-Design – Glasses Stand in Cat Design

Hiermit drucken Sie einen Brillenständer im Katzendesign aus. Sinn und Zweck ergeben sich aus den Fotos. Die farbigen Bilder stammen von BlocksCAD, mit dem ich das Objekt erstellt habe. Ich habe einen weiteren Ständer entworfen:…

Downloads
103
Likes
6
Rating
0
P
PrintablesSlastin

Box for Rhutex threaded insert tools / Box für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8

Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.

Downloads
83
Likes
23
Rating
5
P
PrintablesMichael

Weihnachtsmütze für Pringles Dosen

Super schnelles Geschenk das immer passt. Wir geben noch etwas Geld zwischen Kunststoffdeckel und Folie in der Pringlesdose. Geschenk Fertig. Den unteren Bereich in Weiß habe ich mit Fuzzy Skin gedruckt, das wertet das Model nochmals auf.…

Downloads
80
Likes
18
Rating
5
P
PrintablesMart80

Ice Scraper / Icebreaker / Eiskratzer

Ein einfacher Eiskratzer der jedes Eis bricht :-) A simple ice scraper that breaks any ice :-)

Downloads
78
Likes
12
Rating
0

Untersetzer Blumentopf

Untersetzer Erhöhung für einen Blumentopf Durchmesser ca. 17 cm und Höhe ca. 2 cm

Downloads
72
Likes
1
Rating
0
P
PrintablesLuis

Planter stick for bird protection net / Blumentopf Vogelschutznetz Stütze

To protect the strawberrys in the planter pots against hungry birds with a bird protection net I designed this stick, to keep the net above the plants. The stick has a length of 28cm. It can be printed by positioning it diagonaly on the…

Downloads
71
Likes
16
Rating
5
P
PrintablesThe Lord

Spool holder riser - Stuetze Spulenhalter - Anycubic Kobra 2 Neo

Stuetze für Spool holder Stellt man den Kobra 2 Neo auf verstellbare und vibrationsgedämpfte Fueße, dann haengt der originale Spulenhalter in der Luft. Diese Stuetze laesst sich einfach ueberstecken und verlaengert den Halter bis zur…

Downloads
70
Likes
6
Rating
0
P
PrintablesDJ5000

Aperol Spritz Untersetzer

Hallo, eine Freundin hat Geburtstag und mag Aperol Spritz sehr gerne. Da es etwas “langweilig” wäre, nur die Flaschen zu verschenken, habe ich diese Untersetzer gebastelt. → Selbstgemachter Aperol Spritz Untersetzer Material: PLA Farben:…

Downloads
59
Likes
3
Rating
0
P
PrintablesHaggiwatt

Deko Katze/Deco Cat

Deko Katze beliebig skalierbar Decorative cat can be scaled as desired

Downloads
54
Likes
2
Rating
0
P
PrintablesAlvomane

Pacoone Tiny Air Pump Forclaz Trekking MT500 Air Mattress Adapter | Luftmatratzen Pumpen-Adapter

This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…

Downloads
51
Likes
10
Rating
5
P
PrintablesLinuTec

Untersetzer mit Wabenmuster und Kreismuster / Coasters with honeycomb and circle pattern

Untersetzer mit Wabenmuster und Kreismuster / Coasters with honeycomb and circle pattern Maße 100x100mm / Dimensions 100x100mm

Downloads
48
Likes
2
Rating
5
P
Printableseof

Multicolour Coaster for Flowerpots / Mehrfarbiger Blumentopfuntersetzer

No MMU required. Some M600 Filaint Change instructions in gcode. Diameter is 140 mm, you can scale it in the slicer. If you slice it by yourself, necessary change filament instructions (M600) must be added at the preferred layer. See also…

Downloads
48
Likes
4
Rating
0
P
PrintablesMariusT

Griff für Littycat Katzenstreu Entsorgungseimer

/* Note: because this product does not seem to be available in the US the description is only in german */ Das ist ein Griff für den Littycat Mülleimer für Katzenstreu. Da ich den Mülleimer zwischen zwei Katzentoiletten hin und hertragen…

Downloads
46
Likes
4
Rating
5
P
Printablestom

Fugenkratzer/ Joint scraper

Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…

Downloads
33
Likes
6
Rating
0
P
PrintablesDvG3DAtelier

Dust Filter for Core One Vents – Reinforced Remix with Dovetail Connection / Staubfilter für Core One Lüftungsschlitze – stabiler Remix mit Schwalbenschwanz-Verbindung

This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…

Downloads
33
Likes
13
Rating
5
P
Printablesspencerandhill

Metabo TKU 1693 211 Absaugstutzen unten

Deutsch Ein Ersatzabsaugstutzen für die Metabo TKU 1693. Das Teil hat in der original Explosionszeichnung die Teilenummer 211. Die Artikelnummer lautet 1381695480-324. Sollte auch für die Metabo PKU 250 passen. Ich empfehle folgende…

Downloads
31
Likes
1
Rating
0
P
PrintablesAleks89

Negative Map of Switzerland / Negative Swiss Map

Here you have a negative map of Switzerland / outlines of Switzerland. The X & Y diemensions are set to fit right on the Mk3S+ :) but you can adjust the Z-height as you like. The uploaded G-Code is sliced with a Z-height of 5mm . If you…

Downloads
31
Likes
3
Rating
0
P
Printablesices

Frostpendeln Sticker Katzenauge

Eine weitere Möglichkeit den wunderbaren Frostpendeln Sticker am Rad zu befestigen. Zur Montage werden 2 Stück M3*10 Schrauben und 2 Stück M3 Muttern benötigt. (Für besseren Halt 2 Stück M3*12 , 4 Stück M3 Unterlegscheiben und 2 Stück M3…

Downloads
14
Likes
0
Rating
0
P
Printableswerztimo

Ausstechform Motiv Sportschützen

Ausstechformen in sechs verschiedenen Motiven: Sturmgewehr 90 Gehörschutz Patrone Korn mit Kornträger B-Scheibe Logo Zielscheibe

Downloads
12
Likes
0
Rating
0
P
PrintablesRealPrint

Replacement nozzle for pond solar pump / Ersatzstutzen für Teich-Solarpumpe

Ersatzstutzen für Teich-Solarpumpe / Replacement nozzle for pond solar pump

Downloads
10
Likes
0
Rating
0
P
PrintablesRealPrint

Material for lowering or removing the top step on a pool ladder / Material zum Herabsetzen bzw. Entfernen der obersten Stufe an einer Poolleiter

You still need 2 angle profiles 200 mm x 20 mm x 1 mm made of stainless steel. The thread in the cap may need to be recut. New may 2026: base for the top step Man braucht noch 2 Winkelprofile 200 mm x 20 mm x 1 mm aus Edelstahl. Das…

Downloads
9
Likes
1
Rating
0
P
PrintablesWinnie-HB

Ersatzgriff für Fugenkratzer

Ersatzgriff um einen Fugenkratzer wieder benutzen zu können da der alte Zerbrochen war. Ich habe in mit 10 Wandlinien und 40% infill gedruckt, hält bis jetzt gut.

Downloads
9
Likes
1
Rating
0
P
PrintablesHaggiwatt

Älterer Mann am sitzen. Older Man sitting.

Ohne Stützen gedruckt hat wunderbar funktioniert, siehe Bild. Printed without supports worked wonderfully, see picture.

Downloads
7
Likes
1
Rating
0
P
Printables3D Druck Profi

Kaffeetassenuntersetzer

Der Kaffeetassenuntersetzer schont den Tisch vor Hitze, abdrücken der Tasse und vor Kaffeetropfen.

Downloads
6
Likes
2
Rating
0
P
Printablesdexter

Mini katzen Kollektion

Eine süße Katzen-Mini-Kollektion mit vier verschiedenen Posen. Bitte aktivieren Sie die Stützen beim Druck, da diese Katzen sie benötigen. Die Figuren sind in unterschiedlichen Posen gestaltet. Unterstützung erwünscht Ich freue mich über…

Downloads
3,294
Likes
622
Rating
5
P
PrintablesSimon

bookmark cat - Lesezeichen Katze

A bookmark is always useful and this one is ideal for the last few meters. Another bookmark: https://www.printables.com/model/349162-koala-bookmark

Downloads
2,250
Likes
233
Rating
4.97
P
PrintablesWhity

Brother TZe Label Tape Cartridge Rugged Box

The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…

Downloads
2,095
Likes
424
Rating
4.97
P
PrintablesHenryhbk

155mm Howitzer Shell UPDATE now with scale diorama accessories

For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…

Downloads
1,861
Likes
286
Rating
4.63
P
Printablesserialx

Brother P-touch TZe Label Tape Gridfinity Storage Box

This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.

Downloads
1,654
Likes
324
Rating
4.92
P
PrintablesTomivol

Tool Box SMART mit 12 verschiedenen Einsätzen

Toolbox SMART für Einsätze mit unterschiedlicher Aufteilung oder nur mit Trennsteg Größe Innen 200x185x39 (L-B- H) + 14,5 Deckelhöhe Benötigt werden 6 Schrauben M3x30 ohne Griff oder 4 Schrauben M3x20 und 2 Schrauben M3x35 wenn mit Griff…

Downloads
1,476
Likes
476
Rating
4.75
P
PrintablesPersassyJackson

Flexible Dragon Small (By PRINTZEE)

A small flexible dragon takes about 20 mins or less two print AGAIN BY PRINTZEE this is not mine

Downloads
1,353
Likes
54
Rating
4.67
P
PrintablesBenji

Howitzer kit card for Jeep

I designed this model to be an accessory to the Jeep Kit Card: https://www.printables.com/model/791346-jeep-kit-card The model should pe printed without supports and without a brim. I used a 0.16mm layer height.

Downloads
1,084
Likes
176
Rating
5
P
Printablesohuf

Brother P-Touch TZ TZe Label Tape Holder

(Deutscher Text: Scroll 'runter...) -- UPDATE - 06. December 2025: I updated the model: made it a bit tighter and the clip has now a bit more grip. When I designed this over five years ago, I printed it on a TEVO Tarantula with way too…

Downloads
1,063
Likes
141
Rating
4.91
P
PrintablesJohination

Stitch Christbaum Spitze / Stitch Christmas Tree / Stitch Christmas tree top

Not perfect but still cute. Rotated the model cut on the head with Windows 3D Builder and put it back together again. Look at the back of the model. I then designed the star with Thinkercad and cut it out on the stitch model. I hope you…

Downloads
1,041
Likes
207
Rating
4.63
P
PrintablesH44S

GPU support (universal) stütze

PLA or PETG Layer 0,2 Infill ~15-40% Minimum 65mm Maximum 105mm

Downloads
957
Likes
30
Rating
5
P
PrintablesGn_zg

Malerpyramide Lackierspitze / Painters pyramid triangle painting support

Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…

Downloads
946
Likes
139
Rating
5
P
PrintablesAlPai

Fishing Beer Coaster Mat Cap Carp Untersetzer Bier Fisch Karpfen

A beer coaster with a carp logo on it. It looks best when you make it a 2-color print. Diameter is 72mm.

Downloads
943
Likes
122
Rating
5
P
Printablesvivamus3d

BRILL/ALKO Lawn Mower Gear Pinion (Sperritzel)

My good old lawn mower (push-mower BRILL RazorCut Premium 38) didn't work any more properly, because one of the gear pinions (Sperrritzel) was a bit worn and the wheel didn't drive the spindel reliable any more - it stopped every now and…

Downloads
855
Likes
10
Rating
0
P
PrintablesZiRo 3D
Downloads
820
Likes
94
Rating
5
P
PrintablesJerryie
Downloads
756
Likes
172
Rating
5
P
PrintablesSchweizermaker

Relief Map of Switzerland

Update 7 January 2022: reuploaded STL files with manifold errors fixed. Added picture of my print (unfortunately I pushed too far to the printer borders and had some warping, hence the large gaps). This is a relief model of Switzerland.…

Downloads
753
Likes
72
Rating
5
P
Printablesnetwalk

Christbaumspitze Stern, druckbar ohne Support, mit Aufbewahrungsbox

Eine kleine Christbaumspitze (19 cm breit) in Sternform. Update 30.12.2022: Aufbewahrungsbox hinzugefügt. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 mm Filament: GIANTARM PLA Silk…

Downloads
721
Likes
38
Rating
5
P
PrintablesAndreas ⠀

Cat Toy spring / Katzen Spielzeug Spirale

My cats love playing with these! Print Settings Printer Brand: Prusa Printer: MINI+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Any PLA/PLA+ Notes: Use Brims Category: Pets

Downloads
675
Likes
58
Rating
0
P
Printablesd0mse

Simson S51 Ansaugstutzen

Mehr Luft, mehr Leistung: Der 3D-Druck Ansaugstutzen Dein Motor lechzt nach mehr Luft? Dann ist der Ansaugstutzen genau die richtige Lösung für dich! Mit diesem Upgrade verpasst du deinem originalen Herzkasten ein kraftvolles Tuning, das…

Downloads
659
Likes
16
Rating
5
P
Printablesnroyer

Down Range - M777 Howitzer

This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the M777 howitzer, in use by…

Downloads
652
Likes
45
Rating
0
P
Printables_Storch_

Qidi Q2 - PTFE-Stütze am Hotend

er PTFE am Hotend neigt sehr zum Abknicken. Dadurch gibt es Probleme beim Wechsel des Filaments bzw manuellem Nachladen des Filaments.. Das verwendete Filament zum Drucken muss zum im Drucker verwendeten Filament passen.. Wenn die…

Downloads
617
Likes
76
Rating
5

PTFE-tube 60° chamfer tool by printschnitzel.at

Print instructions BOM: printed parts: 1x body body-7.stl 1x guide guide-7.stl 1x bolt fixture bolt_fixture-7.stl 1x logo logo-7.stl other parts 1x 9mm stanely blade 1x bolt M3x10mm DIN 912 1x bolt M3x6mm (or 8mm) DIN 912 1x M3nS nut DIN…

Downloads
609
Likes
222
Rating
4.5
P
PrintablesRobin3D

Europalette Tischuntersetzer 1:10 / euro pallet table coaster 1:10

Europalette im Maßstab 1:10 als Tischuntersetzer euro pallet on a scale of 1:10 as a table coaster Print instructions -0.2mm Layerhöhe -kein Support notwendig -alle Materialien

Downloads
593
Likes
71
Rating
4.82
P
PrintablesStefan

Eiskratzer ein- und mehrteilige Version

Achtung, ich habe eine neue, rechteckige Version hochgeladen, welche in der Praxis wesentlich besser funktioniert: https://www.printables.com/de/model/722179-eiskratzer-rechteckig-mit-knopf-oder-griff Hier geht es mit der ursprünglichen…

Downloads
544
Likes
67
Rating
4.75
P
PrintablesWhitey4405

Gift Box For The 3D Printed Watch created Printschnitzel.at

A presentation box to complement the watch created by Printschnitzel. As previewed in the Prusa weekly Print 91 article, see the link below. https://www.printables.com/model/8557-3d-printed-watch/files The box is perfect for presenting…

Downloads
524
Likes
52
Rating
4.67
P
PrintablesICT Avatar

Modular P-Touch TZe Tape/Cassette Holder organizer rack 6,9,12,18,24,36 mm

Modular holder for 6,9,12,24,36 mm TZe tape cassettes used in Brother P-Touch printers. The possibility of adding modules as desired. Print instructions Category: Organization Print Settings Printer: k8400 Rafts: No Supports: No…

Downloads
522
Likes
101
Rating
4.9
P
PrintablesSteve Chapman

Gridfinity Brother P-Touch TZ TZe Label Tape Holder

ohuf's design holds the P-Touch TZ Label tape very nicely, I just added Gridfinity'd it. 10 tapes fit perfectly in a 2x5 Gridfinity footprint.

Downloads
496
Likes
84
Rating
5
P
Printablesbredlmax

Dosendeckel 400g 800g fest sitzend

Die Deckel sitzen fest auf der Dose. Druckvorschlag: 20% Infill, 0,2 mm Layer. Stützen werden nicht benötigt. Facebook: 3D Druck für praktische und nützliche Dinge

Downloads
495
Likes
18
Rating
5
P
PrintablesReypatey

Quechua Air Mattress / Luftmatratze Adaptor to Bike Pump

Adaptor for Decathlon Quechua Air Mattresses to regular Bike Pumps. My Mattresses intake is about 17.6mm wide. The Adaptor's width goes from 16mm to 19mm and it's 40mm high plus the little screwthread part. I've printed mine with 0.2mm…

Downloads
494
Likes
30
Rating
5
P
PrintablesJesco

Schutzkappe für die Spitze einer Schultüte

Nützliche Schutzkappe für die Spitze von Schultüten damit die Pappe beim Abstellen nicht abknickt oder beschädigt. Einmal für aussen (hohl) und einmal zur Verstärkung in der Tüte von innen (gefüllt).

Downloads
464
Likes
23
Rating
5
P
Printablespansono

Kartuschenspitze 60° / caulking gun nozzle 60 degree angle

Spitze um 60 Grad gebogen. Ich benötigte es zum abdichten eines sehr engen Bereichs.

Downloads
463
Likes
42
Rating
5
P
PrintablesSJM

Carrera Go! Stützen Pfeiler Pillar Support for 1:43 Slotcar Race Track

This is a replacement stand for building bridges with Carrera Go! 1:43 slotcar race tracks. I build this new from scratch because all existing models (same in thingiverse) are out of tolerance or are too loose or the threads are too…

Downloads
460
Likes
49
Rating
5
P
PrintablesToxic

Allit Europlus Einsätze

Ich habe für meine Bedürfnisse Einsätze für das Europlus System erstellt. Wer eigene Wünsche hat, bzw. Ideen einfach anschreiben. Hier die ersten Entwürfe - es werden noch einige folgen.

Downloads
456
Likes
42
Rating
5
P
PrintablesDatafreak

Duplo Box - Du bist Toll & Du bist Spitze (abgerundetete Ecken)

Remix der Gechenkbox von @PascalLascap_240 https://www.printables.com/model/436819-duplo-box-du-bist-toll Ich habe folegdne Änderungen vorgenommen: Box & Deckel haben nun abgerundete Ecken Loch um 2mm nach Links verschoben Schriftart…

Downloads
448
Likes
49
Rating
4.67
P

Handyhalter Katze N

Handyhalter Katze N mal was für Katzenfreunde. Ist gemacht für Handys oder Tabletts bis 9mm Stärke. ---------------------------------------------------------------------------- Google translates: Mobile phone holder cat Something for cat…

Downloads
440
Likes
14
Rating
5
P
PrintablesRaiVollD

Spindestütze / Spindle Support 300-350 mm

Ich habe diese höhenverstellbare Regalstütze entworfen, um ein durchhängendes Regal von unten abzustützen. Über die gedruckte Spindel lässt sich die Gesamthöhe zwischen 300 und 350 mm einstellen; eine Kontermutter sichert die Einstellung.…

Downloads
440
Likes
208
Rating
5
P
Printableseof

Cat Toy / Katzenspielzeug

A toy for cats or dogs. I put a little bell inside during printing. Needs support. Has my cat got the voronoi spirit? No.

Downloads
425
Likes
74
Rating
5
P
PrintablesRicky_VRS

Tragbare Katze

Tragbare Katze V2: fixed the issues with the model thanks to the guy in the comments who respectfully told me that my model was broken <3

Downloads
415
Likes
19
Rating
5
P
Printablesprintom

Einschmelzhilfe für Gewindeeinsätze

Inspiriert durch https://www.prusaprinters.org/de/prints/76059-jo-presser-threaded-insert-heat-press habe ich diese Einschmelzhilfe konstruiert. Bauteil Maße / Typ Anzahl Lötkolben SREMTCH 80W 200°C-450°C…

Downloads
403
Likes
70
Rating
5
P
PrintablesWindham Graves

Hetzer easy print

Come support these models over on Patreon Buy my time, Not my models. Easy to print hetzer, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The "resin whole" file is for those of…

Downloads
400
Likes
34
Rating
5
P
PrintablesFeFlo

Katze von hinten Keksausstecher

Model ist ca. 7cm hoch. Funktioniert gut, kleiner würde ich aber nicht drucken, die Wandstärken sind etwas knapp und zum Ausstechen hin werden sie kleiner. Gedruckt in PETG, Schichthöhe 0,15mm

Downloads
399
Likes
61
Rating
5
P
PrintablesJohination

Katzenklo Schaufel, Schaufel für Katzenklo

PLA ist ausreichend! OHNE Support druckbar

Downloads
397
Likes
8
Rating
5
P

Staubsaugerdüse, speziell für Ritzen / Vacuum cleaner nozzle, especially for crevices

Beim Saugen im Haushalt und besonders beim Auto stößt man immer wieder auf Ritzen, die zwar voll von Dreck sind, aber auch so schmal sind, dass die üblichen Staubsaugerdüsen nichts nutzen. Hierzu habe ich diese Düsen konstruiert und mit…

Downloads
394
Likes
25
Rating
5
P
PrintablesMiniWorld3D

Chapel Bridge (Kapellbrücke) - Lucerne , Switzerland

🇨🇭 Willkommen in der Schweiz Welcome to Switzerland! This model was designed by Daniel Muradás . The Kapellbrücke (literally, Chapel Bridge) crosses the river Reuss in Lucerne , central Switzerland. Built in 1365 , it is the oldest wooden…

Downloads
392
Likes
52
Rating
5
P
PrintablesGrimsl

FC Bayern München Untersetzer / Coaster (Multimaterial)

A FC Bayern München Coaster for multi-material printers (there's also an .stl for single color). Just take your colors and go for it. It's designed with a bottom layer if someone want to use a flexible filament (I've not testet it until…

Downloads
385
Likes
18
Rating
5
P
PrintablesDIMMEL.design

Herbstwichtel mit Zipfelmütze – Mehrteilig

Dieser niedliche Herbstwichtel bringt mit seiner großen Zipfelmütze, dem langen Bart und seinem gemütlichen Outfit herbstlichen Charme in dein Zuhause. 🍂 🍁 Liebevolle Details: Große Zipfelmütze, strukturierter Bart, runde Nase und ein…

Downloads
380
Likes
101
Rating
0
P
PrintablesDaniel S

Gridfinity bin for Brother TZe Tape 12mm,18mm,24mm

Simple bin for brother TZe Tapes. 12mmx4 and 18mmx3 available so far. thank you to scheff for the step files! https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization Gridfinity by Zack Freedman:…

Downloads
380
Likes
69
Rating
5
P
PrintablesRobin3D

Star Wars Coaster / Star Wars Untersetzer Hexagon

3 Star Wars Hexagon Coaster in 2 version. One for Layerchange at 3mm and the second for Multicolour. Other come later In future I upload an tray for it.

Downloads
376
Likes
82
Rating
4.67
P
PrintablesSystrill

Brother P-touch TZe Label Tape Gridfinity Storage Box - Larger Version

I really liked https://www.printables.com/model/302028-brother-p-touch-tze-label-tape-gridfinity-storage- by serialx for storing my TZE Tapes. I really liked that it fits any size tape. I just had two small issues with it. 1) I like…

Downloads
370
Likes
72
Rating
5
P
Printablesul90

Gutter feed pipe end piece / Dachrinne Stutzen Endstück Marley compatible 150 + 125mm

Gutter feed pipe end piece compatible with Marley gutters. 150 and 125 mm gutter size. Entstück-Stutzen für Dachrinne, Marley-Kompatibel. 150 und 125 mm Dachrinnen-Größe. Printed in PETG (with supports on the build plate), sanded a little…

Downloads
364
Likes
37
Rating
0

Brother P-Touch TZe Cassette Tray

Print at 0.1 mm layer height for smoothest results. There are 2 variants. I printed the 6-cart and 10-cart “standard” variants but couldn't get the “curvy” variant to print as well as I would have liked. Here (image below) I tried…

Downloads
364
Likes
114
Rating
4.78
P
PrintablesQuittenkompott

Zugspitze and Eibsee Mountain relief

Looks great with 0.2mm layer height but only gets better with smaller layer height! Very easy to print, doesn't need anything special.

Downloads
359
Likes
21
Rating
5
P
PrintablesSprzout

Interchangeable Mickey Ear - Pretzel

This is a magnetic Mickey Pretzel Ear, that is meant to be interchangeable with others in the series. Settings that I printed at: Prusa MK4 0.15 SPEED 15% Infill I used Overture Silk Copper PLA for this, which looks great; however, I…

Downloads
358
Likes
96
Rating
5