6,111 models
Dummy 13 has won 3D Model of the Year! Thank you so much to the judges and everyone who voted. TL;DR This is Dummy 13, a printable action figure. It was a work in progress for a while and now this is the finished product. It's still a…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a katana for Dummy 13. It is about 90mm long and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out this remix done by DrunkenGlitchy for a more well defined guard!…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
remix of Dummy 13 by Soozafone that I made in Onshape Print at 150% - 200% size for better results and durability I frequently check this model page for new comments, so feel free to suggest things for improvement [If you want to sell it,…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
This is a one handed axe for Dummy 13. It is about 19x59mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Instructions by Printium 3D For Iron Man, you should be printing the outer armor in Iron Red and Gold filament. I choose to use PLA instead of the recommended PETG because I got more model detail from the PLA. I did use galaxy black PETG…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a shield for Dummy 13. It prints in two pieces, grip and shield. The 2 fit together with a press fit. (Maybe apply some glue since after a while it gets kinda worn out) The shield is about 34x41mm and 2.5mm thick. I recommend just…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
This is a two handed battle axe for Dummy 13. It is about 80x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is a knife for Dummy 13. It is about 14x12mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is a trident for Dummy 13. It's about 150x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Is your “13” tired of all these weak SMGs and AKs? Try the famous minigun! Its six rotating barrels produce an uninterrupted stream of hot lead, obliterating most troubles out of its way. (Do you need something even bigger? Try out the…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
This is a longsword for Dummy 13. It is about 100x22mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :)…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This is a round shield for Dummy 13. It prints in two pieces, grip and shield. The 2 fit together with a press fit. (Maybe apply some glue since after a while it gets kinda worn out) The shield is about 48x48mm and 2.6mm thick (6mm in the…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
This female head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features!
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
A Cat tail for your Dummy ! Since i didnt find a tail and wanted to make my dummy furry like i decided to make one! Its the simpliest design and still movable as the whole Dummy! - No supports needed! I Only recmomend to print on raft if…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This is a dagger for Dummy 13. It is about 37x13mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Dummy 13 500% prusaslicer compatible, pre plated, ready to print version of files by Vasichkin
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a seatbelt clip (dummy) to mute the seatbelt chime on certain seats. I created it for my dog in my Model 3. PLEASE NOTE: Do NOT use this for your seats when there are humans in them! Always put on your seatbelts! Print with 3…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
They reach speed up to 98 km/h.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Grumman LLV (long life vehicle) I've finally figured out how to model the interior so it doesn't need supports. I plan to revise my other previous models to make them easier to print. This print doesn't take too long or use too much…
Print approx. €12.69–€15.51 excl. taxPreliminary estimate for one variant
An easy and simple summer pot inspired by the structure of sea foam. Printing settings: Vase mode - 2 or 3 layers Filament - Fiberology Easy PLA Light gray
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
A dummy bolt carrier group for Smith & Wesson M&P 15, could be used as a security device or to avoid upper deformation during smithing. Print instructions 0.3 mm 70% to 100% infill Better if you print it from PETG.
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Flexi-Hummer ist ein gelenkiges Print-in-Place-Modell, das KEINE Stützen und keine Montage benötigt und sich hervorragend mit PLA drucken lässt.
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
A Wolf tail for your Dummy ! Since i didnt find a tail and wanted to make my dummy furry like i decided to make one, and there were also few people who wanted this tail! Its the simpliest design and still movable as the whole Dummy! -…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Freddy FazBear FNAF - Based Joins Dummy 13
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Comes in two Parts. The upper Bridgepart of a RC Scale Boat, around 1:45 Scale. Takes 8.5h one Part. The main house are 3 parts.
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
I modified my Humvee M998 into a civilian version. I made some tweaks and improvements to the model, added more details. I also made the axles thicker. I printed it using PrusaSlicer organic supports so it wouldn't be as messy near the…
Print approx. €16.60–€20.29 excl. taxPreliminary estimate for one variant
The perfect coasters for the summer. With the embedded support structure, additional dripping water from the rim of the glass is collected. Thus, no water lands on the table. 😊👍
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Soldado Medieval Articulado DUMMY13 Este es un modelo mejorado apartir del soldado de armadura pesada de makerworld. A diferencia del original de makerworld, este fue mejorado para ser imprimido sin soporte excepto unas 2 piezas requieren…
Print approx. €5.74–€7.02 excl. taxPreliminary estimate for one variant
Garmin ZUMO XT Dummy for the Touratech Mount. Make your own cover to suite your needs. blank cover included Glue Cover and XT-dummy together. Printed mine without supports Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for PETGSource material: PET
Gummy-Head : Netsuke.
Print approx. €8.96–€10.96 excl. taxPreliminary estimate for one variant
Hey! Just a little wanna be hummer with a “sportier” look with bigger rear wheels and a hood vent. Printing instructions: This model has been designed to have the minimum overhangs and most of them are at a 45º incline, son no supports…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
I wanted a nicer way to display the plastic drinking horns from Summer Breeze festival.
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
I wanted to prank people in the office and what a better opportunity than chocolate. Wrappers sourced separately. Print files have top layer ironed for smoother look.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Deutsch Ersatzteil 1121 084 4100 Schieber Sommer/Winter Stihl 024/026 Gedruckt in: PETG Schichthohe: 0,15mm Düsen-Ø: 0,4mm Infill: 100% Update: gcode mit ASA hinzugefüht English Spare part 1121 084 4100 Slider summer/winter Stihl 024/026…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Prints at a 45 degree angle in one piece with support to the bed only, or in two pieces that can be glued together. Separate and full STLs available, along with the gcode I used to print.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Based on bambula's model, I just made some minor changes to permit the use of 1mm core cable & improved cable routing. This adapter allows you to use wires and a combination of AA, AAA or another 3V power source instead of the CR2450…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
The trapeze to let you Dummy 13 show her / his acrobatics skills in the full scale. Enjoy.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Nummer 1 - 24 für Adventkalender. gcode mit Farbwechsel (ohne Gewähr)
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
This foosdummy is standard size with an attach fitting sized for a 5/8-inch diameter foosball table rod. There is also a hole that fits a 3 mm diameter fastener for securing to the rod. Height dimensions are 4.21 inch total height with…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for PETGSource material: PET
The board of certain editions of Rummykub is really very unstable. I designed these side supports for this edition of the game. Please make sure in the photo that this is the board in question. Each support is designed to be used either…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant
If a hole (flat/breedingchamber) is occupied by an insect on a rotor please replace it and put it under a roof to protect it from rain! You can recycle broken air-spoon-cups, using them stationarely. If it is a non infill-empty…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have for you Priests, Sorceress, Novice, Mummy or whatever you wish. Suitable for board game figures, or just for a diorama. It is fully authentic, suitable for coloring. I used PLA/PETG Basic as the material No need to use…
Print approx. €9.12–€11.15 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
Hummghurt (n). : A mixture of hummous and yoghurt This is for everyone who has ever picked up a large yoghurt pot in one hand, and a hummus tub in the other, and thought "these really ought to clip together". You need: 1 x Hummus tub…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Dieses 3D-druckbare Kombigehäuse wurde für ein 3,3V RFID-Lesemodul und ein Summermodul konstruiert. Es eignet sich ideal für Mikrocontroller-Projekte mit RFID-Erkennung und akustischer Rückmeldung, z.B. Zugangskontrollen,…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
The original handle was glued on, and secured with two metal pegs from two sides. It is pretty hard to remove. The printed handle should be fixed with rivet and glue. Print it on PETG or ASA. No supports needed.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Beifahrersitz Halterung (Teilenummer 281881357) für VW LT.
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Aloha summer keychain - MMU
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
Wall Plug Stuck!! (dummy) CABINET KNOB “Too Hard To Plug It Off!” Turn the pain point into the design. If it was hard to plug off, let it be your knob! Just fixed it to your cabinet. We designed it in 3 different ways 1. "iPhone charger…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
Introduction: Hi I wanted to make this design for those who love gummy bears. The inspiration was inspired by an actual gummy bear of course! It's not perfect but it was sculpted in blender by me and only me. Specifications and printing…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
This is a perfect "last meter" print: it only uses about 3 g - roughly 1 meter - of filament! Turn your fridge into a candy store with this gummy rat magnet. Print the rat in transparent, colorful filament for a convincing candy-like…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Halloween decoration: Mummy with lollipop - 20 cm, three colours
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
You probably won't even have the hose necessary to fit it onto.
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
Obraz kolibříka složený z 10 kousků. A hummingbird picture composed of 10 pieces.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Version 4 - bigger cable channel (5mm) + lid to close the PCB with voltage stabiliser. A dummy C-size cell that lets a 3.6 V battery-powered device run off an external supply instead of eating a primary lithium cell. The body copies the…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
WATER HOSER PLUG FOR 3/4 INCH HOSE (FEMALE CONNECTOR)!!
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
This is a small accessory pack for Dummy 13 ( Version 1.0 / Beta ) These accessories were designed alongside Dummy 13 by the original creator. Consider this a nice starter set before jumping into the hundreds of community remixes! This…
I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…
The Dummy 13 by Soozafone is, in my opinion, one of the most brilliantly designed models ever. Its immense popularity speaks for itself—achieving an astonishing 2,000 downloads on its first day! I absolutely love the Dummy 13, but I…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Update - 2/20/2026: If you care about the future of 3D printing……
I always had adhesion problems printing dummy in original scale. 1-2 parts fell off randomly and i had to reprint them. Once my son asked to print dummies for his friends, I found that i missed such model. So here it is. This model…
This is a variant on Dummy 13's chest and abdomen parts, giving it a more feminine build that is aesthetically consistent with the original design. These parts are a drop-in replacement for the ones included in the main Dummy 13 model.…
Obvious Disclaimer: This will NOT 3D print. Assembly instructions for Dummy 13. Folds into 1/8th A4 booklet if you want to 2D print it. The assembled dummy 13 file is included but fair warning it is cumbersome as I had to convert from the…
Check latest version1.0! : https://www.printables.com/model/1006007-dummy-13-head-collection-version-10 This head part is designed to seamlessly integrate with Dummy 13's body design. You can choose from 7 variations: Head_A to Head_G.…
Frame To achieve wider range of movement, I had to modify 4 pieces of frame parts. Don't forget to print them. Rest of the frame parts are the same as the original DUMMY 13. It is recommended to print frame from PETG. Armor print…
*******ALPHA VERSION****** K9 COMPANION is a posable dog figurine ready to become your toys best friend. This model is a remix to the DUMMY 13 model by soozafone . The parts are designed from the ground up but keep the same joint…
This is a 7-pack of head parts designed for Dummy 13 version 1.0 Due to design changes in the frame parts, the head part of Dummy 13 beta version is not compatible with the head part of version 1.0. Update: [28/09/2024] I have uploaded a…
Please post makes! This model is a modification of the DUMMY 13, follow the Soozafone rules , in particular: the frame must be printed in ABS or PETG, PLA is NOT suitable! Non dimenticate CARTER A-259! I adapted jace1969's files and…
THE RUNNER WITHOUT THE “13” HAS BEEN UPDATED TO FIX THE “LEVITATING RUNNER” ISSUE. 1/7/2025 UPDATE: 11/24/2024: The parts with wall thicknesses that are too thin to print at 100% scale without weird gaps have been updated. The model…
Added locking points so you can lock it into positions in 45 degree increments. It improves the durability of the stand to hold positions; it seems to hold up much better than the original. It should be printed at a .15mm layer height.…
Compilation of parts for my K9 from my team SG-303, plus some moded parts. Instructions avaliable in K9 - DUMMY13
This is a custom take on Dummy 13 with a Terminator-style twist. I really think Dummy 13 is perfect to make robots, so here's the most post-apocalyptic, gritty, scary robot out there. Have fun with it ! I used some modified parts of…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
Check new version, - Dummy 13 v1.0 in scale - it's highly recommended if you just starting new print! It's full set of parts to print excellent Dummy13 by @soozafone in 500% scale. This remix fixes most of the problems you could get if…
This is a Female version that I tried remixing from others. This version of Dummy 13 has wider hips and narrower shoulders (replacing the frame chest) and waist to give it a more feminine vibe—and little fixes to the other model. The…
Dummy 13 Dirt Bike! This model is a remix of the Dirt Bike Toy / Model by Addison Lane Creations . I scaled it down to 80% in length/height and 60% width to help fit the legs a bit better. I also created handles that were compatible with…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. There is an updated version 2.1 of this Dummy 13 Weapons Pack,…
Introducing the Vanguard 13! Designed with frontline deployment and melee prowess in mind, the Vanguard is the latest soldier in the 13th War Effort! This is my most tested model to date. As you can see, I've printed the final model five…
The other dummy 13 posable hands and fingers didn't work well at 200 percent scale, the fingers were too spaced out, and you couldn't reliably print them with a .4mm nozzle. I used an older model as a guide but I designed these fingers…
The holster can be mirrored to fit both legs of DUMMY 13. To attach the holster, remove the hip plate and detach the leg from the body. Slide the holster through the top until flush with the thigh; then reattach the leg and finally the…
Military Style Plate Carrier for use Dummy 13 Tactical, compact, Sturdy.
This is hopefully the first of many more mods available for this design, The Pistol takes influence from modern-day firearms. I hope this is a welcomed addition to everyone's collection.
Instroduction: Firelion's Female Dummy 13 is good, and I especially like his high heel shoes. However, I think it is not a very good idea for using simple cone to model female upper body. Referenced several existing articulated products…
I DID NOT MAKE THIS. I did not make this design NeoTecLabs “made” this they stole the design from Flexi Alicorn by Jeffrey Yang. but a lot of people liked what they made including me and have been asking around for the files so I am…
NEW - Easy fit hinge! - AND - Snap close lid! - NEW The following backpack types are available: Regular backpack Just the internal storage Accessories backpack Internal storage Two holsters One for the Dummy 13 Katana by @kh4rj0 One for…
Introduction: Thanks @soozafone again for sharing the Dummy 13 to the community. It is a great framework/foundation for facilitating other creators. After fixing the chest and make it more organic, I think it is time to improve other…
You need your dummy 13 to be safe? Here it is - Dummy 13 case. It's pretty rugged for this size. Model printed in place - no assembly needed. Case designed to store number of hands, and some weapons. Please, share your make, i'd love to…
![Dummy 13 [BETA] Assembly Instructions](https://media.printables.com/media/prints/870301/images/6680884_f72690ba-3c09-4865-bf8c-ca848404b76d_67244405-f71f-4ba5-ac30-897bb3016af5/assembly-guide.jpg)
