2,566 models
ISO Standard Metric nuts and bolts. The STL files are only for the nuts as they will be the same for all applications. Fusion 360 file is included to easily customize bolt lengths and threads. The thread length in the file is 5mm from the…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Introducing the inspiring 3D model of the "Inverted Spear of Heaven," the legendary weapon wielded by the formidable warrior Toji Fushiguru. Crafted with unparalleled attention to detail, this digital masterpiece brings to life every…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of hex-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe square-shaped…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Hey there! Here's some cool info about the Scout symbol, the fleur-de-lis. Sir Robert Baden-Powell, the founder of Scouts, chose it as the official symbol. It's all about the Scout code: duty to God, others, and yourself. The fleur-de-lis…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Nuts for 2020 Aluminium Extrusion, T-Slot Nut and Hammer-Nut (Drop-In-Place) for M3, M4 and M5 Screws.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Modified the main parts of the Dentures by iplop and NotThatDusty to also have some openings on the bottom and top so the whole thing can have magnets on the outside as well and stick to metal surfaces when the jaws are fully opened. I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
This design evolved from the need for a “drawer pull” for using the cup as a drawer, but then I realized there was an opportunity for something even more useful. Hang your cups on the new packout wall system, the lids of any vertically…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Info: remixed original frame 2 part, so it contains holes for M3 nuts assembly result is then more robust and tough no space between 2 frame parts also added eyelet so it can be hanged other original model parts can be reused
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
A simple outside radius gauge for 1-15mm. Eine einfache Außenradiuslehre für 1-15 mm.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Cute customisable astronauts: Cosmic Cuties No supports needed for the sitting cuties, but supports are required for the standing astronauts. Choosing your Cosmic Cutie: They are made for 16mm marbles (see below for different sizes). The…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Paint Pouring Flower with 10 spouts. The Flowers dimensions are approximately; 70x30 mm. This Flower features unique holding tabs on top to allow easy lifting from the canvas after its used for pouring paint! I recommend printing with a…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
I'm building on my nut & bolt pencil organizer by making a version that's all nuts. It's also fully compatible with that organizer (see the third picture): an M80 screw size, with 0.5 mm tolerances. Interior dimensions: 75mm (diameter) x…
Print approx. €15.51–€18.95 excl. taxPreliminary estimate for one variant
All buttons are compatible with all nuts. No glue is required to attach a button to a nut. Place the nut on a flat surface, position the knob on top and push the knob hard to lock it on. Nuts are available with a fitted thread (file named…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €9.40–€11.49 excl. taxPreliminary estimate for one variant
Contains an power socket cover blank and one with a Clip for e.g. Router power supply for german power sockets. Printing with PETG recommended due to flexibility. Enthält ein Steckdosenblanko zum selbst modifizieren und eine Clipversion…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Upraveno pro MK4.
Print approx. €3.69–€4.50 excl. taxPreliminary estimate for one variant
The inner diameter of the bowl is 130mm, the diameter of the shell hole is 30mm
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
Woggle Guides and Scouts from Chile neckerfhief or scarf ring. WAGGGS
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Inside and Outside Corners Wargames Wall Sections - Section 3 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your…
Print approx. €7.64–€9.34 excl. taxPreliminary estimate for one variant
jujutsu kaisen Sukuna keychain single extruder multicolor ready
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Remix of https://www.thingiverse.com/thing:4759877 , what is a remix of https://www.thingiverse.com/thing:4695864 Just needed the smaller ones, so i edited it. NEW! ---- ---- ---- Made a new version as remix for printing in under 1h:…
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for one variant
The original profile from the design of the Prusa i3 printer. In addition, M5 threads are already made in the corner holes. Included: Profiles 30x30 mm, height 100 mm Profiles 30x30 mm, height 50 mm Profiles 30x30 mm, height 20 cm T-nut…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a Kumiko jig block. Kumiko is an ancient Japanese woodworking technique used to make the latticework seen in shoji screens and sliding doors. Kumiko patterns are created using wooden laths cut to form various geometric patterns.…
Print approx. €15.66–€19.15 excl. taxPreliminary estimate for one variant
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for one variant
Overview This fidget toy aims includes multiple fidget features and is fully print-in-place. The nut and bolt also have textured grips for a little added sensory element. Printing I printed using PLA on the Prusa i3 MK3. The included…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
No support / FDM friendly If you have springing reduce the temperature of the nozzle to the maximum (205°c for prusament PLA ) (approx. 28 mm scale)
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
No supports required for printing. I'm providing three models here (2 just with the same original proportion, and one improve for better details). One includes the complete knot, while the other is a diagonal version that conserves…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
multicolor ready itadori keychain
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Took the official screwdriver mount by LTT which was originally designed for their own Magnetic Cable Management Power Bar Key solution and adapted it to be mounted on your regular skadis wall. It uses the very easy to use Skadis T-Nut…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
Ein Inlay für alle Teile des Grundspiels und der Erweiterungen Wanderer und Druiden. Passend für die deutsche Version von Lookout Spiele (ev. auch für andere Versionen). Das Drucken funktioniert ohne Stützen. Anleitung für das Drucken des…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
EN: As I needed a smaller version of the model fom VVulture, the funnel broke off at the tapered part of the tube. It's not the designer's fault, the reduction in size made the tube too thin at the transition. Also needed the handle on…
Print approx. €3.48–€4.26 excl. taxPreliminary estimate for one variant
I found this nice model here in Printables https://www.printables.com/model/886832-subaru-wheel-lock-storage-box from zymurgtechnician and adapted it to my need Locks and key from my Kona seems to be a bit bigger than the Subaru ones. So…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
Cookie cutter for the logo "DPSG Lilie" at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Ich habe es mit 0,4 Düse, Pla gedruckt. Kleeblatt auf 100 % Geschwindigkeit ab Wechsel auf 50 % Geschwindigkeit. Einmal auf Deutsch und einmal auf English. I printed it with 0.4 nozzle, Pla. Cloverleaf at 100 % speed from change to 50 %…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This is a remix of the Modular Trailer Hitch Cover by rkxone on Thingiverse. I've added an additional set of faceplate mounting holes for more options when designing faceplates. The m3 nuts are also embedded in the print. Stop the print…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
This is Pig Pen ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5 with…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
When slicing - I highly recommend that you print the top half of the ponytail at 50% speed so it doesn't sag/plop down. You can do that by adding custom g-code at that layer " M220 S50 " (S50 meaning 50% speed). This setting is put in the…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for one variant
Both the large and straight jaws move together and always have the same gap, allowing you to use a ruler or vernier calipers to make the measurement of some awkward places without guessing. I designed these to measure the thickness of my…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Wingnuts M6 and M8 - the nut is inserted after the model is printed. Křídlové matice M6 a M8 - matice se vloží po vytištění modelu.
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
СКЛАДНОЙ КУБОК
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
*Can be printed with a single nozzle with color change.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Perfekt um Sicherungen oder ähnliches direkt im Stromkasten aufzubewahren. Die Lade kann direkt auf die Hutschiene vom Verteilerkasten eingehängt werden, und ragt über die Abdeckung heraus. Viel Spaß beim Drucken.
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
Extra Hardware: 4x M3 Mutter 4x Kunstoff Standoff min. Länge 10mm 4x Nylon Schrauben M3 2x Hutschienen Adapter Druckeinstellungen: Support nur auf dem Druckbett Zusammenbau: Sobald die Endstücke Fertig gedruckt sind einach die Stütz…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Cookie cutter for the logo of the "Jupfis" (a goblin or "Kobold") at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Blue
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Vykrajovátko na těsto ve tvaru skautské lilie s volitelným razítkem ve tvaru chodského psa.
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
After sawing some aluminium rods and pipes to length I always end up with a bad cut and rough edges. The inside edges of pipes are easily cleaned up with a deburring tool but the outside edge is more tricky (if you don't have a belt or…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Dyson Outsize Absolute+ Vacuum Seal Bag Attachment I created this using the template from @M3D3. You can use it from most newer Dyson stick vacuums.
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
This is an outside curve sander that allows you to mount a strip of sandpaper. When you sand as shown in the picture the sandpaper conforms to the outside curvature of what you are sanding. We are using it with our carving club. The…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. You can print it in different sizes. I scaled it down to use it with a keychain or for decoration, but you can also print it in original scale.…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Dyson Outsize Absolute+ Hose Holder Use this to hang your Dyson hose separate from the main unit. Should work for most newer Dyson stick vacuums.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Das Trainingsrad wurde sowohl für Ausbilder als auch für Schüler entwickelt und ist ein wunderbares Werkzeug, um die Beziehung zwischen den sechs Richtungen und den drei Dimensionen deutlich zu machen. Es lässt sich leicht erklären und…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Wer kennt es nicht man braucht ein Tropfen WD40 an einer schwer zugänglichen Stelle. Einfach auf die Fläche sprühen und schon rutscht es zur Spitze und kann dann schmieren ohne das alles voll gesprüht wird.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Ausschnitt/Relief der Stadt Bigge/Olsberg - NRW - Germany
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Remix of Anti-tangle Gravity spoolholder for MMU2S by @Forfelet, for bigger nuts (76mm)
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for PETGSource material: PET
Diese Halterung wurde für das schwarze Netzteil des Prusa MK3 entwickelt. Damit kann es außerhalb des Druckergehäuses befestigt werden. Wie die neue Kabelführung aussehen sollte, lässt sich gut aus der mehrsprachigen Anleitung von Prusa…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
Meine Frau hatte drei Adventskalender 2024 Bestellt und so wurde sie mit drei Schicken Nähgewichten in MiniDonutform beglückt. Ich habe ihr also sogleich einen Halter für ihre Ikea Skadis Wand desiged und gedruckt. Wenn sie Auch einen…
Print approx. €4.33–€5.30 excl. taxPreliminary estimate for one variant
Nice holder for Wera 838 RA-R M remixed from Mario to fit the wider body and the locking Wera bitholder. The holder fits with a T-Nut in Skadis pegboards. Screwdriver can be stored with bit attached Printed in PET-G, no support, 0.3 layer…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
[DE] Tastatur-Lernhilfe für 1. & 2. Klasse (Deutsch & Englisch) - Taktil & 2-Farbig Machen Sie das Lernen interaktiv und spaßig! Diese 3D-gedruckten Tastatur-Modelle sind die perfekte taktile Lernhilfe für Schüler der ersten und zweiten…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Malevolent Shrine : Jujutsu Kaisen My gcode has supports everywhere you may want to try bed only instead. May save some time on clean up Malevolent Shrine: The Divine Domain of Ryomen Sukuna In the world of Jujutsu Kaisen , a sorcerer's…
Print approx. €25.04–€30.60 excl. taxPreliminary estimate for one variant
These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…
I saw a few of these around, was bored one day and decided to mess around with designing one. I printed it in Turkey Egg from Filamentium….fun filament! Enjoy Designed with those who don't have the most elaborate printer in mind. **…
Base The base includes bolts , nuts and washers of M2 - M48 . Separately models are placed in specific folders. All data collected in All_in_one.dwg file (autocad). !Attention! Be careful when using for accuracy critical parts (or use…
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
This is a fully parametric, lidless box that I made as an exercise to learn how to use OpenSCAD. Parameters that can be changed include: box dimensions, wall thickness, corner roundedness, hex radius, and which walls of the box have the…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/205335 This collection consists of 3 types of bolt. Hex bolts Allen sockets bolts Allen countersunk bolts All bolts are in following sizes:…
Changelog: Changelog 30.07.24 New Gridformat added (3x1, 3x2, 3x3) with heights from 4U to 14U 26.07.24 Request fulfilled by @manofthesky_692784 : Magnetsocket added 18.07.24 STL files added as an alternative to 3mf format These…
Updated Version to my previous design. (simplified the design and edited some geometry to make them fit universally) A set of easy to print and use nuts for 20-Series and 30-Series extrusions. There are 2 types and 3 mounting options:…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
Use-case: Use this hand knob for everything that is held together by a M6 or M8 screw or threaded rod. It is intended to press on with its front side (the side with the smaller diameter). Thanks to the trough-hole, the screw or threaded…
I added a tolerance of 0.2 mm to the thread diameter in order to compensate for printer tolerances. Print with small layer height, e.g. a maximum of 0.15 mm for a 0.4 mm nozzle. Please find screws for the nuts here:…
Dual Direction Thread Screw Set (Left-Hand, Right-Hand & Double-Thread) This model set contains several types of screws and matching nuts designed for testing, mechanical demonstrations, or educational purposes. Included Parts Right-hand…
I remixed the Wushu grip from Maverick0197 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Maverick0197:1/WushuGrip:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1-0.2mm Infill:…
I made a lot of types of nuts not all of them tho I will make future collections later (takes a long time to make)- so I would greatly appreciate if you like, download or both. Thank you!
A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…
Complete set of metric nuts. The improved thread design does not require consideration of printer tolerances any longer - at least as far as the nuts are big eough for the printer. Print with low layer thickness, e.g. with a layer…
Set of rails: Strainght in 2x, 1x, ½ and ¼ of standard length. Flexible rail in 1x standard length. Curve in 1x, ½ and ¼ standard length. Two way crossing in 60° and 90° Three way crossing Truntable in 1½ of standard length. Turnout…
Building on Anachronist's Nuts & Bolt Baby Dexterity toy, this version keeps the same screw dimensions but provides varying nut external dimensions. Your toddler can have fun stacking them in order of size (or in any order that pleases…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
(Updated 30 May 2023 with more thread clearance and separated STL files for Cura users.) Ever since I became a father, I wanted to make this nut and bolt toy for my child that encourages hand-eye coordination. I didn't have a 3D printer…
Bolt thread shrunk 1.5% Nut thread expanded 2.5% Outer hex same size as steel version Fit each other as well as normal metric bolts and nuts. Printed m4 up to M12 at 0.08 layer height. Fit each other as well as the original nut and bolt.…
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
The Stones: The well-known Gonggi stones from Squid Game can now be printed and played at home. The stones are designed authentically, making them look exactly like in the show. For the perfect game experience there is weight added by…
This a generic mount for a 35mm top hat rail. This mount clamp snaps quite tight at the top hat rail and has a 10mm flat mounting base on top. You can easily attach different mounting cages to this base plate with glue. Update: I uploaded…
The counter project needed them, so I thought I'd add the required 8mm M3 screws and nuts needed to finish the https://www.printables.com/model/449690-game-counter-0-99/files make.
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
Complete set of metric nuts. The diameter is 0.2 mm above the nominal diameter in order to compensate for filament printer tolerances. Print with 0.15 mm layer thickness or less. I recommend to print perimeters outside-in, not inside-out…
Deutsche Beschreibung: siehe unten I use the knobs to mount things like milling fences to my workbench. For sure there are tons of other use cases. Let me know in the comments if you need other sizes (e. g. diameters). Updates 2026-10-10…
This 3D printable model of Gojo Satoru from Jujutsu Kaisen and requires ZERO supports. ENJOY!
Din rail with exact dimensions (screenshot shows them half). The files attached directly and shown in the images are 4TE (Teilungseinheiten, 1TE = 17,5mm) long. I attached a .zip with 1TE, 2TE, 4TE, 8TE and 12TE. Fusion 360 project file…
![Hyundai Kona Wheel Locks or Nuts Storage Box [REMIX]](https://media.printables.com/media/prints/890297/images/6818167_b95ff9f1-ff3f-40d3-8ce2-ee5109c5818a_aec615e0-3ea9-408b-bd29-080ceb598f09/hyundaiwheellockbox-jc-comp.jpg)
