Search results: uu

Sort order

5,529 models

P
Printablesgwendal

Vacuum head for MFT and Festool 27mm CLEANTEC hose

Derived from Festool vacuum MFT hood by ggragg , to vacuum while working on the bench. Use a Insta-Dog to attach to the MFT table. Has internal radial pins to connect to the 27mm CLEANTEC hose.

Downloads
1,290
Likes
300
Rating
5
P
Printablesbuchnema

Wall Bracket for Dyson Casdon Toy Vacuum

The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…

Downloads
814
Likes
86
Rating
5
P
PrintablesBombastus Hands

Makita to Festool Vacuum Adapter DRT50 RT0700

Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…

Downloads
635
Likes
42
Rating
4
P
PrintablesElektroarzt

Vacuum helper disc for filament dry bags

Simple but effective disc for usage with filament dry bags. I always had difficulties in using the pump right in the first attempt. Just put one disc with the filament in the bag and exhaust the dry bag manually or with a battery pump…

Downloads
544
Likes
81
Rating
4.85
P
PrintablesBilld

Dyson V6 Vacuum to V8 Accessory Adapter

An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…

Downloads
335
Likes
26
Rating
5

Vacuum cleaner crevice nozzle d35mm (extension possible)

Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson). Possible extension from 120 mm nozzle up to 280 mm. Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part…

Downloads
325
Likes
44
Rating
5
P
Printableseyalshtark

Adapter from new Dyson accessories to Dyson Big Ball vacuum cleaners

An adapter for connecting various accessories from new wireless Dyson vacuum cleaners to Dyson Big Ball vacuum cleaners. Printed from PETG to give the notches more flex. Easy print. Works perfectly Enjoy.

Downloads
232
Likes
24
Rating
0
P
Printablespepen11

Festool vacuum hose D36 (textile) clip

Clip for cable and hose for D36 mm with textille cover. Tested on power cables for TS55, ROTEX RO150, Domino DF500

Downloads
189
Likes
14
Rating
0
P
PrintablesP_created_this

Robot Vacuum Cleaner Cleaning Tool

A compact and practical maintenance tool designed for robot vacuum cleaners , combining efficient cleaning with user-friendly ergonomics. Dual-Purpose Functionality Cutting Edge: One side features a sharp, recessed blade that easily cuts…

Downloads
184
Likes
84
Rating
4.6
P
PrintablesActualPepperoni

Juul pocket clip

I don't like lint in Juul. I also like to see if Juul is dying. I hope you feel the same. PETG 100% Infill, .2 layer height Supports on build plate because pocket clip piece is floating. You've been warned. You'll most likely need to…

Downloads
138
Likes
17
Rating
0
P
Printablescnaynik

Replacement part Miele vacuum cleaner

Replacement hose connection for Miele vacuum cleaner. -you will need a M4x30 Screw. -for D=42mm hose

Downloads
135
Likes
23
Rating
5
P
Printables3dcityquilmes

Dragon ball Majin Buu keychain

Dragon ball Majin Buu keychain

Downloads
108
Likes
14
Rating
0
P
PrintablesNeva

vacuum cleaner nozzle thin and long

vacuum cleaner nozzle thin and long

Downloads
104
Likes
12
Rating
0
P
Printablesonorinbejasus

Metamoran Fusion to hold-up Majin Buu(k)

Fusing together to stop the evil Buu(ks) on their shelf! Edits: 4/14/2023: I noticed that Trunks' and Goten's fingers did not properly align. So I modeled and uploaded a fat Gotenks for everyone's amusement

Downloads
99
Likes
83
Rating
5
P
Printablesgalvanicky

Nasal aspirator adapter for Silvercrest SAST 18 A1 vacuum cleaner

The extension of adapter is from 6mm to 7mm wide, change it in provided.3df file if you need to. Adapter for Silvercrest SAS 7.4 LI D3 you can find here .

Downloads
61
Likes
3
Rating
5
P
Printablesstritti

Robot Vacuum Cleaner-friendly Raiser for Sideboard - parameterized

Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…

Downloads
61
Likes
22
Rating
0
P
PrintablesFC2M3D

SILVERCREST handheld vacuum pump adaptor for ZWILLING vacuum storage products

I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…

Downloads
57
Likes
10
Rating
0
P
PrintablesGabT

Central Vacuum crevice

Crevice tool for Kenmore Central vacuum. Inner diameter for pipe entry is 31.5mm that reduce to 30mm. It is print in PETG with 3 perimeters, 25% infill and 6 bottom layer. Tip hole of at the end of the crever is 10mm by around 28.5mm

Downloads
51
Likes
2
Rating
0
P
Printablesfernandotg81

Majin Buu and Babidi - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Control3d White Swap Instructions: Start with Black At layer #17 (1.44mm) swap to White for the rest.

Downloads
42
Likes
4
Rating
0
P
PrintablesEnder3Knight4

Titan bandsaw to vacuum adapter (35-52.5mm)

Print in any filament, Does not need supports and does not matter what layer height you use. Happy printing!!

Downloads
41
Likes
4
Rating
0
P
PrintablesSirHair

Dyson DC25 upright vacuum wand cap, part number: 914114-01

Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…

Downloads
36
Likes
2
Rating
0
P
Printablesnicolaw

Gtech Multi K9 cordless vacuum wall mount

Original onShape project: https://cad.onshape.com/documents/0c3b8288c7b92d178ec1f3ff/w/b7a05d6d8787b131fd44b065/e/38e3f2fc0970434ac8e5aed7?renderMode=0&uiState=68fe239e2195008bbebe03d0

Downloads
35
Likes
3
Rating
0
P
PrintablesIra S

Vacuum cleaner small crevice tool

This is a simple crevice tool so your vacuum hose can get into small places. Fits standard household vacuum nozzles. Designed in OpenSCAD and printed on Prusa MK3. No supports needed.

Downloads
28
Likes
1
Rating
0
P
PrintablesWillis Works

Mini Pegboard Cup (fits Nuun tube)

It started as a joke, but this little cup is actually pretty handy. 29mm diameter to fit a Nuun tube for pens, etc.

Downloads
24
Likes
1
Rating
0
P
PrintablesBrixi

SilverCrest (lidl) handheld vacuum latch (bin release)

My model is SAS 7.4 LI D3. I printed on the side with supports for strength, 100% infill (I don't think it is needed), 0.2mm resolution PLA. Holds for now. Had little trouble removing the infill from the inside button but it is manageable.

Downloads
14
Likes
1
Rating
0

Glides for Bestway and Intex Pool Vacuum ślizgi do odkurzacza basenowego Bestway i Intex

Zapasowe lub ulepszone czarne kulki (rolki ślizgowe) do głowicy odkurzacza basenowego. Elementy te ulegają zużyciu lub zgubieniu, a odpowiadają za płynne sunięcie odkurzacza po dnie basenu bez rysowania folii. Projekt zaprojektowany jako…

Downloads
4
Likes
6
Rating
0
P
PrintablesMax

Vacuum nozzles for all common hose sizes

A se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes. Each size has an option of Outer Diameter measurement or Inner…

Downloads
27,437
Likes
14,850
Rating
4.86
P
PrintablesMax

Vacuum hose adapters for all common sizes

Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…

Downloads
21,740
Likes
7,585
Rating
4.9
P
PrintablesHonza David

Prusa lubricant LM8UU adaptor (Bearing pacifier)

Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…

Downloads
6,673
Likes
729
Rating
4.95
P
PrintablesMax

Parametric vacuum hose connector with magnetic connectors.

Updated 2025-03-01 - fixed a few bug, improve transition logic, added threads (beta). OpenSCAD project to create vacuum hose connectors. Intended for generating connections that would allow connecting vacuum hoses and tools of different…

Downloads
4,713
Likes
893
Rating
5
P

Modular Robot Vacuum Door Ramps for door thresholds

Summary This modular ramp allows robotic vacuum cleaners to easily overcome door thresholds and small height differences. The individual segments can be flexibly combined to achieve different widths. Key facts For overcoming door…

Downloads
3,588
Likes
2,281
Rating
4.94
P
PrintablesThomllama

Cyclone Vacuum Dust Separator. Version 4.1 (1 to 1-1/2" hose)

January 31-2025 Version 4.1 released! Version 4.1 is released! minor mods and tweaks! November 26- 2024 Version 4 release! (note - v3 and v4 lower cone is the same(NOT V4.1!!) , only the upper inlet/outlet section is new so you can reuse…

Downloads
2,974
Likes
468
Rating
4.7
P
Printablesplex41

Tornador vacuum cleaner connection

This is Tornador vacuum cleaner connection to suck up the dirt thrown up directly. The front neck is 12.5 degrees slanted and rotatable. V6 v12 is 15 degrees. you need only one of them. V6 12,5deg or V12 15deg The vacuum cleaner…

Downloads
2,722
Likes
248
Rating
5
P
PrintablesExtrutim

Vacuum Bag Valve Spacer

A small but very useful helper for vacuum bags. This allows the air to be extracted much easier and faster. You can simply stick the part with some double-sided tape from the inside to the valve. Of course it works without tape but then…

Downloads
2,474
Likes
640
Rating
4.95
P
PrintablesMax

Vacuum hose Y connector - splitter for all common sizes

Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…

Downloads
2,283
Likes
302
Rating
5
P
PrintablesThe Alchemist

Kaercher wd vacuum attachments

attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…

Downloads
2,231
Likes
385
Rating
5
P
PrintablesNeferupitou

Gyuu Tomioka Katana

There is two versions of this katana. The first (v1) use one 5mm metal rod to solidify the blade, the second (v2) use two 3mm metal rods. There is two versions of the scabbard. The difference is the position of the kurikata (the little…

Downloads
2,212
Likes
275
Rating
5
P
PrintablesTuna

Milwaukee - Vacuum Dust Collector for Drilling

Drill holes without the mess! I had it print on the face that touches the wall with supports for 50 degrees.

Downloads
2,074
Likes
415
Rating
4.75
P
Printablescwlewis11

Tank Turret For Robot Vacuum Cleaners

Generic flat bottom tank turret to fit robot vacuum cleaners. Simply scale to suit your robo cleaner then print and use some double-sided tape to secure in place. Print 1, 2 or 3 to get the desired armoured look for your cleaner Check out…

Downloads
1,969
Likes
906
Rating
5

Zuul Terror Dog – Ghostbusters

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Downloads
1,826
Likes
442
Rating
4.63
P
PrintablesPeter H

VACUUM HOSE HANGER (DOUBLE)

A simple (but quite long) print to hang any vacuum hose up to two inches (50mm) diameter and two loops. My hose is extra long (6m) so needed two loops to keep it tidy and off the ground. Printed in PLA, but anything will do - does not…

Downloads
1,822
Likes
473
Rating
4.94
P
PrintablesItsLato

35mm Vacuum nozzles and holder

3pc vacuum nozzle and holder. Fits 35mm vacuumhose. Perfect for car or couch cleaning. Printed with no supports on the nozzles. The stand are mounted by two countersunc screws or dubblesided tape. Feedback is much appreciated!

Downloads
1,744
Likes
771
Rating
4.92
P
PrintablesMZ4250

Chuul Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,738
Likes
61
Rating
5
P
Printablesfroemar

Schlauchhalter Festool // festoolvacuum cleaner hose holder

Halter für den Staubsaugerschlauch zum einhängen in den Festool Zyklon. Holder for the vacuum cleaner hose to hang in the Festool cyclone.

Downloads
1,690
Likes
214
Rating
5

Open Source Fully Printable Vacuum Turbine Set

Open Source Vacuum Turbine Module (Fully Printable) This is a fully printable, open-source vacuum turbine set designed to be easily incorporated into your own projects. Whether you are building a custom vacuum, a fume extractor, or…

Downloads
1,655
Likes
827
Rating
5
P
PrintablesAdrian Dobre

Dyson V7, V8, V10, V11, V15 Vacuum bag adapter

I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed.

Downloads
1,631
Likes
135
Rating
4.92
P
PrintablesPetclaud

Vacuum Sucker for Drilling - Karcher Shop Vac 35 mm OD

Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" ( https://www.thingiverse.com/thing:2939576 )! Great design since through the hole you still have full visibility on what you are doing, while in the same time through that…

Downloads
1,624
Likes
313
Rating
4.7

Drying Rack Feet - for Robot Vacuum

About the model Durable feet to lift a drying rack, designed to prevent robot vacuums from getting stuck on the rack’s legs. These feet fit standard 16 mm drying rack legs (common size in Europe) and provide a stable and slightly elevated…

Downloads
1,513
Likes
533
Rating
4.97
P
Printableskerngebiet

Mirka Deros Sander Adapter for Festool Cleantec and Vacuums

Introduction There are already a lot of adapters for Mirka Deros Sanders . But either they are for the old Deros sanders, didn't fit well, had a weak structure or I just didn't liked them. Therefore, I have created three own adapters with…

Downloads
1,467
Likes
168
Rating
5
P
PrintablesTim

Roborock S5 Vacuum Eyes

<<UPDATE>> Model updated following some feedback. The top surfaces for the main eye and eyeballs have been flattened, so that it is easier to print with minimal supports and post processing. Download the files labeled “xxx - Flattened”…

Downloads
1,464
Likes
1,054
Rating
4.97
P
Printablespressi

Cyclone Vacuum Dust Separator with Built-in Pressure Relief Valve

Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…

Downloads
1,438
Likes
311
Rating
5
P
PrintablesMax

90° elbow vacuum hose adapters for all common sizes

Hose adapters with a 90deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…

Downloads
1,420
Likes
187
Rating
5
P

Flexible segmented vacuum hose for drill press with parametric FreeCAD design

This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…

Downloads
1,401
Likes
274
Rating
5
P
PrintablesCoat

Wall mount bracket Makita vacuum-cleaner

Wall mount for the Makita vacuum cleaners DCL 180/181/and i assume 140/141/182/281/282. In other parts of the world also known as XLC Different from other wall-mounts this one grips the body higher , just under the motor part. Makes it…

Downloads
1,387
Likes
155
Rating
4.88
P
PrintablesIbišević

Majin Buu Super Buu Dragon Ball Figure

Bring one of the most iconic villains to your 3D printer with this Majin Buu Super Buu model. Designed for anime fans, collectors, and 3D printing enthusiasts, this model captures the recognizable look and presence of Majin Buu in a…

Downloads
1,378
Likes
163
Rating
5
P
PrintablesGlennovitS 3D

Drill Dust Collector (use with or without a vacuum - incl. alignment marks)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
1,361
Likes
435
Rating
4.83
P
Printablesdr.dentz

Roomba ramp - Ramp for vacuum robots

I have some height differences between the rooms in my apartment. Therefore I needed some ramps for my vacuum robot to get from one room to the other. One ramp segment has a height of 2 cm. You can also scale it in your slicer to fit your…

Downloads
1,339
Likes
124
Rating
4.5
P
PrintablesJBoe

Lubricant LM8UU adaptor for Super Synco Lube DE21030 with screw cap

Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…

Downloads
1,317
Likes
211
Rating
5
P
Printablesleeii3

Makita DVC750L vacuum adaptor for Makita DBO180

Makita DVC750L vacuum adaptor for Makita DBO180

Downloads
1,246
Likes
218
Rating
4.8
P
PrintablesNikodem Bartnik

Big Cyclone Separator For a Vacuum Cleaner

Check out a video about my project! I tried to use 3D printing to speed up production on a laser cutter. A simple cyclone separator that can be easily printed within 20 hours saves you money on bags and works amazingly well!

Downloads
1,222
Likes
489
Rating
4.8
P
PrintablesMax

90° tapered elbow vacuum hose adapters for all common sizes

Hose adapters with a 90deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…

Downloads
1,217
Likes
159
Rating
5
P
PrintablesMakers Manual

Vacuum Hose Adapter Collection

This is a collection of Vacuum Hose Adapters for dust extraction with various woodworking tools. All adapters have been custom designed (not auto generated) , this should mean they are stronger, better airflow and no silly features. Both…

Downloads
1,190
Likes
189
Rating
5

Drill Dust Collector for Vacuum Cleaner

This is a dust collector with the effect of sticking to the wall for standard and professional vacuum cleaners. It adheres to the wall and leaves your hands free for drilling holes. It is mainly intended for dry diamond drilling with…

Downloads
1,141
Likes
223
Rating
5
P
PrintablesMax

Vacuum hose flanges to connect to flat surfaces.

Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…

Downloads
1,135
Likes
234
Rating
5
P
PrintablesDÆSIGN

Modular Robot Vacuum Ramp

Getting tired of not having your robot vacuum reaching into rooms because of the threshold? As was I! I made this model as a modular ramp with about 10 degree angle so that my robot vacuum wouldn't stop and think it reached a cliff (a.K.a…

Downloads
1,133
Likes
101
Rating
4.75
P
PrintablesDET-Man

CORE One Y-Axis Bearing Press Tool for LM10UU

This little tool helps you press LM10UU linear bearings into the aluminum housing on your 🥰 Prusa Core One's Y-axis assembly. It makes sure the bearings are fitted centered in the CNC machined housing. As you need to heat up the aluminum…

Downloads
1,102
Likes
21
Rating
5
P
PrintablesFulcrum Design

Ryobi One+ Vacuum Cleaner Wall Mount

The wall mount that the Ryobi One+ HP 18V vacuum cleaners comes with is too flimsy to be useful so I designed this one. The vacuum simply slides in from the top and it provides a secure, snug fit. It can be mounted with whatever screws…

Downloads
1,100
Likes
105
Rating
5
P
Printablesfifindr

Hands-Free Vacuum Dust Collector

A wide-shielded dust collector that attaches to the wall using vacuum suction — giving you a completely hands-free drilling and cutting experience! 🧲 Holds itself firmly to flat surfaces while you work 🔄 2 variants available: • Standard…

Downloads
1,083
Likes
568
Rating
5
P
PrintablesFrankee

Watering Bottle Cap - Anti-vacuum

Description 2 sizes - nozzle diameter 3.5cm (19 holes) and 5cm (37 holes) This watering cap is designed to fit commonly used PET bottles of various sizes. It also includes an Anti-Vacuum System (AVS) . Thanks to this, when you start…

Downloads
1,069
Likes
453
Rating
4.44
P
PrintablesMeister Edel

Festool Vacuum cleander adapter male part (.stl, Fusion, step)

I use different vacuum cleaners and older used parts together with festool machinery in my shop. So I did need to print matching adapter parts for them. I uploaded the files f3d & step so you can modify it to your needs. Here I designed…

Downloads
1,069
Likes
141
Rating
0
P
PrintablesGerryPB

Dyson Vacuum Adapter

This is an adapter to use mini vacuum accessories with a Dyson Vacuum. It snaps in nicely, just as any other Dyson accessory. I also made a mini crevice tool posted separately. https://www.prusaprinters.org/prints/150050-mini-crevice-tool

Downloads
1,008
Likes
154
Rating
5
P
Printablesmressler

Shark Vacuum Wall Mount

The Shark Vacuum I have (Shark IZ362H) has a nice feature where the main unit can hang from one of the extensions. I thought it would be great to be able to mount the vacuum from the wall, so I designed this to suit! The wings on either…

Downloads
1,006
Likes
104
Rating
5
P
Printablesfourlowfab

Milwaukee M18 Vacuum Wall Mount

The vacuum will fit pointing up or down. I typically leave it pointing down and leave the hose attached. I sell these on Etsy after I saw a bunch of people selling my design, there I include a mount for the accessory, although I do not…

Downloads
1,005
Likes
100
Rating
5
P
PrintablesIAmAnEngineer

Shark vacuum wall mount - two tools

Wall mount and tool holder for Shark vacuums.

Downloads
1,005
Likes
114
Rating
5
P
PrintablesBarebaric

50mm air hose, vacuum, or pipe system: Adapter, angle, connector, and clip collection, threaded

I made these models to route an air hose with a 50mm inner diameter . It can also be used with my CNC spindle dust shoe or with my vacuum nozzle . Part list hose-adapter-46mm-38mm.3mf Simple straight adapter. Both dimensions are outer…

Downloads
998
Likes
148
Rating
5
P
Printablesfns720

Drill dust collector adapter for vacuums

The suction holds it very steadily without any extra sealing on the edge. Proof: https://youtu.be/smAcbBiziY4 Compatible with standard 35 mm home vacuum hoses. Suction test: Printable without support. 20230506 update: uploaded Fusion 360…

Downloads
990
Likes
117
Rating
4.9
P
PrintablesPeter H

SHOPVAC CAMLOCK VACUUM CUFF ADAPTER 50MM TO 40MM ID

DOWNLOAD CAMLOCK and find more accessories HERE. This part will adapt a 40mm vacuum wand to the new CAMLOCK end. It should be a slightly loose fit depending on the taper of your vacuum. I use PFTE plumbers tape to ensure a perfect fit,…

Downloads
963
Likes
211
Rating
5
P
PrintablesMike Ant

Pool vacuum cleaner / Bazénový vysavač

The standard pool vacuums sold didn't suit me because they have little pull due to their size and wide openings. I needed a vacuum cleaner that was just big enough, that was low and, thanks to the larger pull, would pick up small debris…

Downloads
963
Likes
117
Rating
5
P
PrintablesVolker

Pool vacuum nozzle for Intex/Bestway

Remixed the nozzle from squbel https://www.thingiverse.com/thing:224431 as it tends to suck itself to the pool ground and make movements complicated: I added some holes to allow more waterflow. Can be printed w/o supports. Took arround 5h…

Downloads
952
Likes
112
Rating
4.75
P
Printablesrfourb

Skinny M18 Vacuum Nozzle

Extra skinny nozzle for the M18 Wet Dry Vacuum, intended to be printed in Vase mode. This pretty significantly affects airflow, so it likely shouldn't be used for extended periods of time. However, it's very convenient for getting in…

Downloads
946
Likes
154
Rating
5

DeWalt orbital sander vacuum adapter

An adapter between a DeWalt orbital sander and a shop-vac hose. Specifically designed to work with a DWE6421. There are two versions. One for a Shop-Vac hose that is ~1 1/8" OD, and one for a DeWalt hose that is ~1 7/8" diameter. F3D…

Downloads
945
Likes
137
Rating
5
P
PrintablesMatt Boyer

Wall Bracket for Dewalt Stick Vacuum

My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…

Downloads
940
Likes
132
Rating
5
P
PrintablesAaron Wood

3D Print Dust Collector "AirTip" 1-1/2 in. - 2-1/4 in. Wet/Dry Shop Vacuum Attachment

Update 2-16-24: I recommend using gorilla glue clear polyurethane glue to attach the TPU gasket to the main collector. Other glue types don't really like to stick to both PLA/ABS and TPU. update 11-17-23: I have added an adapter to make…

Downloads
927
Likes
132
Rating
5
P
PrintablesWynn G

Dewalt Orbital Sander to Vacuum Adapter

This is an adapter to attach a vacuum to Dewalt orbital sanders. It isn't mounted using Dewalt's system instead it's just a friction fit. I've designed it for a couple different sizes of vacuum hoses. you will need to measure your…

Downloads
919
Likes
159
Rating
5
P
Printablesstevehlau

Drylin Style Bushing RJ4JP-01-08 RJ4JP-01-10 (LM8UU and LM10UU direct replacement)

Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…

Downloads
919
Likes
74
Rating
4.8
P
PrintablesMagnus

Robot Vacuum Dust Bag Adapter for Easy Emptying

This adapter is designed to make emptying robot vacuum dust bags easier, saving you money and reducing waste by reusing the bags instead of throwing them away. It comes in two versions: one for Electrolux oval vacuum cleaners and another…

Downloads
908
Likes
528
Rating
5
P
Printables3D Elegance Lab

Flexible Vacuum Hose (Loc-Line hose)

A Tigh seal on all components allows it to be used with fluid. Used for Vacuum therefore direction of flow is reversed to allow for smoother suction. Smallest internal diameter : 0.570"(14.6mm) view image Vacuum attached inner diameter:…

Downloads
907
Likes
119
Rating
5
P
Printablesbudoprint

Ryobi 3 Gallon Vacuum Nozzles

Handful of nozzles for the Ryobi P3240 3 Gallon Wet/Dry Vac. These are created from Zivbot's customizable vacuum tool original scad file (re-uploaded with these files if you want to create your own). To recreate these nozzles:…

Downloads
904
Likes
220
Rating
5
P
PrintablesLars

Systainer Cyclone Seperator for Festool Vacuum

Cyclone Seperator for Festool Vacuums This is my custom version of a cyclone seperator for Festool vacuum cleaners. The goal was to build my own, cheaper version of Festools CT-VA-20, while maintaining the core functionality without…

Downloads
902
Likes
289
Rating
0
P
PrintablesExtrutim

Festool Cleantec Vacuum Cable Holder | CT 15 E

A simple cable holder for the Festool Cleantec CT 15 E. I do not know if this could still work with other models of. It would be possible. Stowing the cable in the back gives you more room for accessories in the top compartment. It is…

Downloads
901
Likes
172
Rating
5
P
PrintablesExtrutim

Festool Vacuum Drill Dust Collector

A simple adapter to suck up dust from drilling. A quick solution was needed, so this is not a well-designed model. But it works well with the standard Festool hoses. The inner diameter is 35.6mm and becomes slightly narrower further…

Downloads
897
Likes
178
Rating
5
P
PrintablesStonepako

Kid Buu from Dragonball " action figure "

MY SETTINGS FOR THIS PRINT: -Nozzle 0,40mm -Filament 1,75mm -Layer 0,08mm -Infill 5% -Walls 2 *PRINT THIS MODEL UPSIDE DOWN

Downloads
892
Likes
120
Rating
5
P
PrintablesErl

Drill vacuum attachment

Attachment for vacuums to collect dust when drilling. Sticks to the wall while vacuum is on. Made for Ryobi portable shop vac (R18PV-0), but probably fits many others. Contact med for STEP files if you want to modify.

Downloads
891
Likes
159
Rating
4.82
P
PrintablesUNIT3D

UNIT3D's LM8UU Linear Bearing

Replacement Linear Bearings for 8mm rods of Prusa printers Minimal friction surface Clean outside, no grooves or logos Print time: 39 minutes No support 0% infill The 3D Models found online where pretty low-poly and had other features I…

Downloads
880
Likes
65
Rating
4.71
P
Printablesfns720

Tube mount for Dyson vacuum accessories

I hate carrying Dyson accessories while vacuuming - that's why I have designed this mount. I made two belt compatible mounts and also two more for attaching accessories directly on the vacuum cleaner's tube. Update #20230920: I have…

Downloads
880
Likes
198
Rating
4.88
P
PrintablesFM

Parametric vacuum nozzles

Customizable Vacuum Tool by Zivbot on Thingiverse: https://www.thingiverse.com/thing:1571860 OpenSCAD file (https://openscad.org/) Use the customizer on the right to tweak the model then F5 to preview, F6 to render and F7 to export as .stl

Downloads
877
Likes
158
Rating
5
P
PrintablesMax

100mm magnetic vacuum hose connector

100mm magnetic connector for all common hose sizes (that I could find online). All adapters have: Magnetic connector 100mm internal diameter Positions for 12 magnets, 10x3mm in size (magnet recess is 10.5x4mm). 3mm clearance around the…

Downloads
868
Likes
164
Rating
5
P
PrintablesRip282

Mini Spoiler for Robotic Vacuum (or anything)

Features: Universal design – fits most round robotic vacuums (Xiaomi, Roborock, iRobot, etc.). Easy installation – simply attach with double-sided tape or secure with small screws (depending on your setup). Lightweight construction –…

Downloads
857
Likes
252
Rating
5
P
Printabless_chen

Dyson Vacuum Small Crevice Tool

A small crevice tool for Dyson vacuums, V7 and later. This tool is even narrower than the stock one for reaching even smaller crevices. The design has a fully functional locking mechanism like the original, using a compliant mechanism to…

Downloads
857
Likes
94
Rating
5
P
PrintablesN8finch

Shorter Dryer Lint Vacuum Attachment

This is a shortened dryer lint vacuum attachment to clean out lint that gets past your dryer lint trap. I just did it on my Samsung dryer and got a little bit out that looked kind of old so I'm glad it's clean in there. I used my older…

Downloads
841
Likes
448
Rating
0