Search results: v8

Sort order

665 models

P
PrintablesGabor Gyarmati

V8 Engine Block Name Card and Pen Holder

A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…

Downloads
5,662
Likes
928
Rating
5

Lamp V8

The holder is made for a light blub socket with the following dimensions: 5.75 cm tall and 4 cm in diameter. And the hole for the wire is roughly 0.6-7 cm in diameter. Print the lampshade in vasemode and the circle has to be on the bottom…

Downloads
1,013
Likes
217
Rating
4.75

K-9 Rocket Thrust Vector Control Gimbal V8

Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…

Downloads
931
Likes
54
Rating
0
P
PrintablesBilld

Dyson V6 Vacuum to V8 Accessory Adapter

An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…

Downloads
337
Likes
27
Rating
5
P
PrintablesHaprog

Post filter connector for Dyson V8 body

[2022-12-01] UPDATE: Version 2 of the model added which has minor adjustments for better fit. The original version 1 had some trouble attaching properly to the vacuum main body due to some dimensions. Spare part for the back side of the…

Downloads
324
Likes
35
Rating
5
P
PrintablesMichaelQ

Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Downloads
243
Likes
22
Rating
4.5
P
PrintablesRxR

Visière v83 covid_19 dérivée de Shield v16

Cette visière est une version dérivée de ce modèle : https://cults3d.com/fr/mod%C3%A8le-3d/divers/shields-anthony-seddiki-covid19 Ce modèle est compatible avec les clips de la shield v16 et les clips de ce modèle sont compatible et…

Downloads
178
Likes
6
Rating
0
P
PrintablesPaxer

Dyson V7, V8, V10, V11, V15 Vacuum Bag Adapter for 27.4mm Thread

Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…

Downloads
129
Likes
14
Rating
0
P
PrintablesHujairi

HIKVISION DS-KABV8113-RS Rain Shield

HikVision DS-KV8113 Villa Door Station Rain Shield. This is the surface version not the flush (to be mounted on the wall). Print Settings: 0.2mm Layers, 15% infill. 2 print files provided (PLA & PETG) Note: commercial use is not…

Downloads
92
Likes
5
Rating
0
P
Printablessammythesquibb

Dyson V7, V8, V10, V11, V15 dust extractor adapter Fein 35 mm

I wanted an adapter for Dyson accessories that would fit a dust extractor with a 35 mm hose. There wasn't one, so I remixed an existing model from Printables. I have a Dyson V7 but I believe the connections up to V15 are interchangeable…

Downloads
76
Likes
9
Rating
0
P
PrintablesL7899

Mopar 55155620AB, Jeep WJ "V8" Emblem

Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…

Downloads
64
Likes
13
Rating
0
P
Printableschaosmatic

TP Shelf Deluxe 42069 V8 Twin Cam

This rework is : -Stronger as you can adjust the settings/orientations for each individual parts -Easier to print -no supports needed Printing with a higher amounts of perimeters as well as more top and bottom layers is going to help for…

Downloads
39
Likes
6
Rating
0
P
PrintablesJC

DYSON_wand-base_w_23x2mm_v8

Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one. https://a.co/d/9Y6o5Eo I had to figure out what threads it used. Weird 23mm x 2mm pitch. I designed 23mm x 2mm pitch threads. Then designed…

Downloads
12
Likes
4
Rating
0
P
PrintablesMrMinion

Filament Clip V8

Simple filament clip, works with any 1.75 mm spool. Print instructions Yes. Indeedio. Yet another filament clip lmao... I looked and tested many, almost got so bored of it that wanted to give up. But I simply needed one working desing to…

Downloads
16,466
Likes
2,488
Rating
4.76
P
Printablesmathp

V8 Engine (Mechanical Movement)

A design i made a few months ago. Enjoy!

Downloads
9,325
Likes
1,157
Rating
4.61
P
PrintablesStenly_G

Engine block V8 keychain

This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…

Downloads
8,854
Likes
1,457
Rating
5
P
PrintablesUniCube3D

V8 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…

Downloads
6,665
Likes
1,983
Rating
5
P
PrintablesStenly_G

V8 Engine Block Pen Holder (USB, SD, microSD)

A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…

Downloads
3,512
Likes
811
Rating
4.88
P
PrintablesSalut

V8 Business Card Holder / Visitenkartenhalter

Here we have a remix of zykovkristian's model of a V8 Business Card holder. I made some changes to make it easier to print (crankshaft alley removed, oil pan bores removed, crankshaft bores reduced, details in the head minimized, map slot…

Downloads
2,865
Likes
338
Rating
4.44
P
Printablesjarrah

Dyson Accessory Wall Bracket V7 V8 V10 V11 V15 Tool Holder for 6 or 8 Tools or Attachments

This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…

Downloads
2,810
Likes
547
Rating
4.93
P
PrintablesDalpek

GameSir G8 Plus extender for bigger tablets - NEW v8.0

Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…

Downloads
2,700
Likes
85
Rating
5
P
PrintablesForgetter

Chevy Camaro LS3 V8 Engine - printable valves, lifters + N20 mini motor holder

Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…

Downloads
2,314
Likes
703
Rating
4
P
PrintablesJaxon Kowalenko

V8 engine

PLEASE DOWNLOAD!😃

Downloads
1,865
Likes
150
Rating
5
P
PrintablesWhity

Dyson V8 Accessory Holder

A holder to store more than the default two accessories. You have to drill a 4mm hole to the base to mount the holder using a M4 screw and nut. The right arm can be mirrored to have an additional slot. Support my work For non-Prusa parts…

Downloads
1,861
Likes
567
Rating
4.89
P
PrintablesBootjevaarder

V8 Engine Fidget 1.0 (obsolete)

New version 2.0 Printing The crankcase is printed with support on build plate. Print the piston pins with brim. I printed with PLA+, layer height 0.16 mm. Dimensions 70 x 68 x 50 mm. Weight 0.050 kg. Assembly - Build the crankshaft using…

Downloads
1,744
Likes
600
Rating
4.17
P
PrintablesAdrian Dobre

Dyson V7, V8, V10, V11, V15 Vacuum bag adapter

I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed.

Downloads
1,643
Likes
136
Rating
4.92
P
PrintablesSunShine

Print In Place V8-Engine

This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the Thingiverse Thing, it helps alot! :) There is more info on the design in this video:…

Downloads
1,636
Likes
173
Rating
4.14
P
PrintablesHammerSpb

Dragon Burner v8 Ender3 X Plate Mount

You could print it with 0.4mm nozzle and 0.2mm height You would need 4 m3x4x5 heat inserts Update Added Step and 3mf files

Downloads
1,635
Likes
249
Rating
5
P
PrintablesCamaro45th

K1/K1C/K1SE CFS Upgrade Orca Slicer Config-Test-v8

Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…

Downloads
1,613
Likes
99
Rating
5
P
PrintablesRadim Schuster

engine V8

-I used M4 screws with lengths of 35-40mm for block connection. -8pcs -to assemble piston connecting rod M3 7-9mm. -16pcs -printed on SUPER DRAFT settings with supports. -The best printing position for the piston connecting rod is…

Downloads
1,429
Likes
198
Rating
0
P
PrintablesSunShine

Print In Place V8 and V6 Engines!

note, this used to be the thngiverse file for only the V6, but is now combined to the V8 and the V6. This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the…

Downloads
1,422
Likes
166
Rating
4.57
P
PrintablesMaker Rx

LS3 V8 Engine - Moving Model

Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx The LS3 is a modern classic - big displacement, no nonsense, and built to perform. This 3D printable scale model captures its mechanical soul with moving pistons, a…

Downloads
1,406
Likes
192
Rating
5
P
PrintablesLeokaldzik

v8 engine for cooling cans. V8 engine, cans fridge V8 cooler

V8 engine cooling cans. To assemble the engine you need to use M4 36cm 4 pcs. M4 12mm 2pcs. M4 nuts 10 pcs. It is worth checking all dimensions yourself after printing!! It's best to finally glue everything together

Downloads
1,242
Likes
233
Rating
5
P
Printablesender3guy

v8 engine phone stand

I made this because why not it may be very large scale to what you want 0-100% infill use supports Category: Tools

Downloads
1,201
Likes
254
Rating
0
P
PrintablesAlexisSausi

Engine v8

mettre le vilebrequin a au moins 20% de remplissage

Downloads
1,184
Likes
244
Rating
4.78
P
PrintablesPhilippHee

Dyson V11/V10/V8/V7 Accessory Mount/Holder / Zubehörhalterung

Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…

Downloads
1,120
Likes
110
Rating
4.96
P
Printables3D-Academy

V8 Visitenkartenhalter / Business Cardholder

V8 Visitenkartenhalter / Business Cardholder

Downloads
1,018
Likes
178
Rating
4.5
P
PrintablesMVN

small nozzle for Dyson V7, V8, V10, V11, V15

a small nozzle for Dyson V7, V8, V10, V11, V15

Downloads
998
Likes
107
Rating
5
P
PrintablesBootjevaarder

V8 Engine Fidget 2.0

Upgrade version 2.0 - Easy assembly of the crankshaft. - Integrated stand. - Turning wheels in stead of cranked handle. Printing The crankcase is printed with support. Print the pistons and piston pins with brim. I printed with PLA+,…

Downloads
976
Likes
349
Rating
4.2
P
PrintablesOnelostcause

V8 Spark Plug Holder

This is a remix of the spark plug holder by zodlyrob. https://www.thingiverse.com/thing:4910998 The only change was to remove 2 cylinders for a true V8. There is only the main body, the front and rear piston pieces can be downloaded from…

Downloads
919
Likes
83
Rating
5

Dyson V8 Spacer (Fixes Loose Attachment/Wand)

Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…

Downloads
910
Likes
48
Rating
5
P
PrintablesMohd Aftab

V8 Engine

A V8 engine is a type of internal combustion engine featuring eight cylinders arranged in a V configuration. Designing a V8 engine in SOLIDWORKS involves several key steps and considerations to accurately model the complex geometry and…

Downloads
891
Likes
141
Rating
0
P
PrintablesByron James

Dragon Burner V8 BTT Eddy Rear Mount

Mounts on the brace on the rear using 2x M3 heat inserts. Offset: X: 0mm, Y: 27.53mm

Downloads
882
Likes
101
Rating
5
P
PrintablesRobin

Moto Guzzi V85TT anti-turbulence deflector

similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…

Downloads
818
Likes
13
Rating
5
P
PrintablesBuildX

#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…

Downloads
772
Likes
96
Rating
5
P
PrintablesPHIL Sherwood

V8 Engine with Blower - 1/10 Scale

Took off transmission and added fly wheel. Scaled to 1/10 for back of RC truck.

Downloads
766
Likes
141
Rating
0
P
PrintablesAdam L

Dyson V15/V11/V10/V8/V7 Accessory Mount/Holder - Double Deep Edition

The parent model is great, but it did not quite fit certain tools that require a larger spacing from the wall. In this remix I remodeled in Fusion360 and added 10 mm depth from the wall to accommodate those pesky tools that wouldn't fit…

Downloads
711
Likes
79
Rating
5
P
PrintablesTritschi

Case for 18650 Battery Shield (V3, V8)

As the versions of a.m. shield are quite confusing, I built two versions. One for V3 I believe. The second for V8 of this battery shield. The Lid may fit to both versions The Knob is for V3. V8 may be equipped with it, I will add this…

Downloads
666
Likes
53
Rating
5
P
PrintablesMaker Rx

Ford Flathead V8 Engine - Moving Model

Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx Before overhead valves took over, there was the Flathead V8 - raw, simple, and legendary. This 3D printable scale model brings that piece of history to life with moving…

Downloads
658
Likes
101
Rating
0
P
Printablesgrzny99

Motor V8

Pro kompatibilitu součástí tisknout vše v měřítku 1:5 a "pístní čep" 1:1, šroubky na spojení ojnice M2x10

Downloads
642
Likes
92
Rating
4.67
P
PrintablesMurat

Slim Wand for Dyson V8

This is a slime wand for the Dyson V8 vacuum. The original is great, but it is too thick for vacuuming between my car seats. I am sure you can find other uses too! Print instructions Category: Household Summary This is a slime wand for…

Downloads
632
Likes
100
Rating
4.67
P
PrintablesMD3D

Dyson V8/V12 vacuum cleaner adapter template

Template This is the base connector section as a print in place version for all newer Dyson vacuum cleaners (for example Dyson V7, V8, etc). Reengineered from the original and tested over several Versions. This is for all of you who do…

Downloads
625
Likes
70
Rating
5
P
PrintablesSODA3D

Dyson V8 Trigger lock

Affiliate links for my favorite filaments to help support what I do are here: Linktree The Dyson V8 is a great vacuum but the lack of a trigger lock makes using it for long sessions somewhat painful so I created this trigger lock so you…

Downloads
544
Likes
40
Rating
4.8
P
PrintablesMarcoZ76

Dyson V8 adapter for older Dyson accessories

This is an adapter for use old Dyson accessories ( i have an old Dyson DC08) with the new Dyson V8. I have printed with PETG at 0.2 mm at 240°C and bed at 85°C. I used a Slic3r PE. Feel free to remix but don't use for commercial use.…

Downloads
536
Likes
69
Rating
3.25
P
PrintablesBroderickHyman

V8 Engine with view hole

V8 Engine block with a large hole where you can view the crankshaft and connecting rods. This also allows you to re-attach the connecting rods after the two halves are pushed together. I printed the whole model at 50% size which was a lot…

Downloads
513
Likes
50
Rating
5
P
PrintablesFCUK

Dyson accessory holders - Doubled ( V8 and V7 and V10 )

Beefed up design upgrade to double the original one :) Print Settings Printer: SK-Go2 Rafts: No Supports: Yes Resolution: 0.2 - 0.6 nozzle Infill: 40% Filament: Amazon PLA PLA Black Notes: Beefed up design upgrade to double the original…

Downloads
509
Likes
89
Rating
4.63

Car V8

Libre à vous de changer l'orientation des pièces dans votre slicer résolution 0,20 remplissage 17% besoin de support pour les fichiers suivants: caisse, portes, arceau, aileron

Downloads
490
Likes
82
Rating
4.75
P
PrintablesNotCrazyFPV

Cable tracks / cable chain - fully customizable - [v8]

Since I did not find customizable cable tracks that fit my need, I designed my own. I tried to make it as easy as possible to modify everything using OpenSCAD ! How to customize? Customizing the cable tracks is as easy as it could be.…

Downloads
481
Likes
118
Rating
5
P
Printables3DCraft

V8 Engine

Brutal Geometry Collection

Downloads
480
Likes
46
Rating
5
P
PrintablesSquidMan

Dragon Burner v8 Cowl with hex pattern

**Update 04/07/2024** -Pattern updated to match with the hex orientation on the V0 display and skirts so that if anyone is obsessive as I am, their toolhead and V0 display and skirt hexes will now match up (I just didn't notice in the…

Downloads
476
Likes
76
Rating
5
P
PrintablesRobin Åström

Dyson v8 trigger button

Trigger button for the dyson v8 vacum. i printed it in esun abs+

Downloads
472
Likes
21
Rating
5
P
Printableswoelpi

Dyson Accessories Wall Mount for V7, V8, .. and V12

UPDATE: I bought an Dyson V12 and discovered that they changed the interface. I made a version that fits the newer accessories with the wedged interface, too. The mounts are angled, so all varios Dyson Accessories can be mounted without…

Downloads
464
Likes
104
Rating
5
P
PrintablesAndrew

Arca Rail bag platev8-3

I made this Arca rail bag plate (gamer plate/ cheater plate) for my PRS rifle. I designed it to go with a “AG’s: MINI PLATE PRO PAD” and using a cheap 50mm Arca clamp from Amazon/ebay. I also put holes in the four corners so that you…

Downloads
458
Likes
27
Rating
0
P
PrintablesClassicGOD

Adapter base for Dyson handheld vacuums (V8, V10, V11)

Adapter base for full size cordless Dyson vacuums V8 and up. Can be used to design your own adapter for whatever you need it. Designed to print upright in 1 peace with no support. Designed with PETG flexibility in mind. Can't guarantee…

Downloads
455
Likes
67
Rating
5
P
PrintablesAJ Quick

Dyson V7/V8 Battery Adapter for Ridgid / AEG Batteries

This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…

Downloads
447
Likes
46
Rating
0
P
PrintablesBuildX

#0008 Dyson V7 V8 V10 V11 Adapter

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is an adapter for the Dyson V7 V8 V10 V11 that would allow you to use…

Downloads
441
Likes
68
Rating
5
P
PrintablesZEXI0N

V8 engines by Jaxon Kowalenko

These engine models were made by Jaxon Kowalenko. I HAVE MADE NO CHANGES TO THE MODELS other than to separate it into 3 files. Please direct ALL praise to the original creator; and if you download my files, PLEASE go give the original…

Downloads
432
Likes
28
Rating
0
P
PrintablesAdrian Dobre

Dyson V7, V8, V10, V11, V15 - Baby Nasal Aspirator adapter

I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed. It requires/was made to work with: https://www.prusaprinters.org/prints/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter

Downloads
422
Likes
17
Rating
0
P
Printablesnzalog

Dyson V8 / V10 / V11 adapter for V6 acessories

This remix is intended to be printed and left on the V6 accessory. The V6 accessories snap into place and do not come off that easily. Additionally it does not require two pieces like the original. Made some other changed to clean up and…

Downloads
422
Likes
47
Rating
4.5
P
PrintablesZneuzity

moto guzzi MT v88TT wind deflector

Simple deflector on motto guzzi tank (you have to mirror the other side) cc Daník ;)

Downloads
410
Likes
7
Rating
5
P
PrintablesAndries Basson

Wand Tube/Cleaner Head Clip Latch Tab Button, Compatible with Dyson V7 V8 V10 V11 V15

Wand Tube/Cleaner Head Clip Latch Tab Button – Compatible with Dyson V7, V8, V10, V11, and V15 Vacuum Cleaners Replacement Part : Perfect for replacing a broken or worn-out latch tab button on your Dyson wand or illumination tool.…

Downloads
403
Likes
24
Rating
5
P
PrintablesTgbto

Dyson V7 V8 V10 V11 Turbo Nozzle

Print standing, adjust X/Y scale according to your needs : 100% means a tight fit in a V11. take ABS shrinkage into account (scale X/Y 100.5 to 102%) for a good fit if printing in PLA, 99% makes for an easy fit especially in a V7/8

Downloads
397
Likes
43
Rating
4.83
P
PrintablesElytzium

V8 Engine Motor Reuchermänchen / Reucherstäbchen

Its an engine where you can but smoke cones in (reucher kegel) The smoke comes out of the exausts just glue the exaust on to the engine I recommend to put aluminium foil on the top and bottom in the inside where the space is or just you…

Downloads
388
Likes
30
Rating
0
P
PrintablesALE TNT

Filter cleaner iRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11

Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.

Downloads
388
Likes
69
Rating
4.75
P

Dyson V-ball wheel, for V6 V7 V8 V10 V12

Print instructions: use PETG, ABS, ASA, PC or PA, for durability for ABS, ASA, PC and PA I suggest using a brim as well print with boldge facing up use ‘normal’ supports at 35 degrees Assembly instructions: unscrew the previous V-ball…

Downloads
385
Likes
50
Rating
3

Mad Max Interceptor V8 Ford Falcon Gaslands

3D Model converted from the game, adapted to 1/64 scale and kitted with various parts from here. Includes dog. Will accept hot wheels medium wheels.Print with supports from build plate. The inside of the car have some supports that have…

Downloads
378
Likes
53
Rating
0
P
Printablesboothyboothy

Dyson V10/V8/V7 Accessory Mount/Holder

This is a remix of albrnick`s clever wall mount for the Dyson Vacuum Cleaner. In this remix I have: 1.Completely redesigned in Fusion with an articulated node design to provide greater flexibility in positioning accessories and reducing…

Downloads
372
Likes
106
Rating
4.78
P
Printablesmatthew duncan

v8 engine

v8 engine

Downloads
371
Likes
47
Rating
1
P
PrintablesMorten.Kolve

Parametric 6x17 V8 lenscones

See https://www.printables.com/model/401588-parametric-6x17-lenscones-for-v6-slide-in-lescones for instruction on use for different lenes. NOT TESTED! Only a update of the CAD files.

Downloads
371
Likes
33
Rating
0
P
PrintablesScale_Precision

TT02 Front Splitter - Audi V8

This is a front splitter for the Tamiya TT02 Audi V8 RC car kit. This part has been designed to install into the existing lower bumper holes with two M3x20 machine screws, however M3x15 will also work without issue. Printed out of PLA or…

Downloads
370
Likes
36
Rating
0
P
PrintablesTechX

ProtoXtruder mount for Dragon Burner v8

This is a mount I made for the Dragon Burner to fit the ProtoXtruder with visually pleasing transitions. The original mount does 've a smaller contact area to the extruder, so I hope this give me a bit more rigidity. But the main focus…

Downloads
364
Likes
74
Rating
5

Dyson V8 Backend Filter Attachment Replacement

Reverse-engineered this backend filter attachment piece for my Dyson V8 vacuum. More information on my website: https://dragonmountaindesign.com/2023/10/08/dyson-v8-backend-filter-attachment-replacement-part/ Direct link to Onshape model:…

Downloads
361
Likes
51
Rating
5
P
PrintablesDevilscave

USB HOLDER - Corvega Atomic V8 Motor style Multipart EDITION

Have created a multipart version of "Corvega V8 USB-Holder" by demolition88. https://www.thingiverse.com/thing:3060893 Since I found the model good but somewhat boring in one color. I worked on the block a little more and made more space…

Downloads
360
Likes
72
Rating
5
P

Ender 5 Max tool head cover with integrated V8 air jets

This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…

Downloads
358
Likes
22
Rating
5
P
Printablesr6e

Dragon Burner V8 Parts for Rook

These parts adapt the [Dragon Burner](https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner) to the [Rook MK1](https://www.printables.com/model/387431-rook-mk1-3d-printer). The parts were specifically designed for [Fabreeko's…

Downloads
358
Likes
45
Rating
4
P
Printablesmadmaxx890

Dragon Burner v8 to Chaoticlab CNC Tap adapter

Adapter to securely mount the v8 Dragon Burner to the Chaoticlab CNC Tap for Voron 2.4/Trident. The CNC tap is fairly tall compared to the Dragon Burner. You may need a taller extruder to clear it. I'm using a modified Wristwatch G2…

Downloads
351
Likes
58
Rating
5
P
PrintablesCreeps

Dyson V8 Tight space nozzle

I designed this to use under my fireplace where I can't reach with other nozzles. I know this aren't an ideal design, but it works for me. Use the “up-top adapter” to adjust the angle of the nozzle. There is a small tolerance at the…

Downloads
348
Likes
33
Rating
4.25
P
PrintablesZodiase

Dyson V7 V8 V10 V11 Adapter Base

This is a remix of the adapter made by @BuildX. In this remix I've made these changes: Cut off the extension tube to reduce the overall height as much as possible. This makes this model immediately ready for designing new attachments. The…

Downloads
346
Likes
38
Rating
5
P
PrintablesLeen15151

Dyson V11/V10/V8/V7 Accessory Mount/Holder - Modded

This is a reinforced version of the great Accessory holder by albrnick. I tried 2 times to print and use the original version, but accessories cause a breaking on the support between the two holders after a couple of weeks. So I edited…

Downloads
342
Likes
36
Rating
3.9
P
Printablesjoseph.greiner

Dragon Burner Cowl with Hex Pattern and Labels, updated to DBv8

Here is a simple hex pattern I put on the Dragon Burner cowl. In the STEP file there is a repaired version of the original cowling which should make creating new designs a little easier. Updated Nov 27, to v8 cowls and added the cat cowls.

Downloads
336
Likes
61
Rating
5
P
PrintablesManicken.se

Dyson V15/V11/V10/V8/V7 Wall Mount

Despite the impressive performance of Dyson vacuum cleaners, there is often a lack of dedicated storage for the included nozzles and attachments. My solution is simple, a wall mount that accommodates two of Dyson's nozzles simultaneously.…

Downloads
331
Likes
38
Rating
5
P
PrintablesPete Selux

Ender 3 Fan Cover Ford V8 Supercharger w/ blades/louvers

Haven't tested yet. Created blades to sit at about 60 degree open inside for more realistic look. Added a touch jolleos design to jake of all trades design. The thought is to superglue my designed blades into place. Category: 3D Printer…

Downloads
320
Likes
29
Rating
0
P
PrintablesPrintVision

V8 Engine Statue

Bring raw horsepower to your desk or shelf with this highly detailed V8 engine bust ! This 3D printable model combines the aesthetics of mechanical engineering and sculpture — featuring belts, pipes, fan blades, and classic muscle car…

Downloads
298
Likes
33
Rating
5
P
Printablesrph

Dragon Burner V8 MGN12 mount with beacon probe.

Shout out to @Bendandsend_757774 for originally designing this MGN12 mount for the Dragon Burner.

Downloads
296
Likes
37
Rating
5
P
PrintablesDesigner

Remixed | Engine block V8 keychain

Remixed Engine V8 block keychain

Downloads
293
Likes
25
Rating
5
P
Printablesejkej

Dragon Burner (v8) a BMG extruder (beta)

Modul pre pouzite BMG extruderu (praveho) (v testovani) Tlac bez nastavenia podpor. Podpory su uz sucastou modulu a treba ich po tlaci oddelit. (pridany aj subor bez pridanych podpor, individualne nastavenie) Modifikacie boli z STL…

Downloads
291
Likes
47
Rating
5
P
Printablesdm32

Fanttik V8/V10 Slim adapter for blower nozzles

A adapter for the Fanttik V8/V10 slim. With this adapter, the supplied air blower nozzels can be used for vacuuming. The specified settings can also be adjusted Layer height: 0.1mm Infill: 15% Ein Adapter für den Fanttik V8/V10 slim, mit…

Downloads
289
Likes
32
Rating
5
P
PrintablesModel Magic

Mad Max - The Original V8 Interceptor - 1979

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
285
Likes
42
Rating
0
P
Printablesbr41ndamage

G2SA/Orbiter filament sensor for Dragonburner V8

Upgrading my old CR10 v1 with the new Dragonburner v8 hotend and G2SA extruder. However I noticed a lack of filament sensor options for both, and I have just completed building my ERCF and needed a filament sensor for calibration. I chose…

Downloads
285
Likes
76
Rating
5
P
PrintablesKalle Luotola

Godox V860III macro diffuser

I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…

Downloads
283
Likes
19
Rating
5