300 models
Dallas Korbin Vector CP1 Hand Gun. Korben Dallas, the protagonist of the movie “The Fifth Element”, uses a Vektor CP1 pistol throughout the film.. The Vektor CP1 is a semi-automatic pistol that was designed and produced in South Africa1.…
Print approx. €15.49–€18.94 excl. taxPreliminary estimate for one variant
Halterung für GoPro an dem LS2 Vector 2 Helm.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
This model is quite small (61mm long). If you want a bigger model, I've also made a 210mm long version with more detail . Vectors “The Vectors were as minimally designed as a starship could be. Little shielding, almost no weaponry, very…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Vector with Pirinha Gun Despicable Me
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
“The Vectors were as minimally designed as a starship could be. Little shielding, almost no weaponry, very little computer assistance. The Jedi were the shielding, the weaponry, the minds that calculated what the vessel could achieve and…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
The Jedi Vector is the starfighter used by the Jedi Order during the High Republic Era. This is the version used in The Acolyte, about 100 years before episode I. It is the successor of a different Jedi Vector from 100 years earlier. This…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Simple 2d design of the KRISS VECTOR.I will make more guns if you want to suggest them let me know in the comments.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Discover the Vector Equilibrium Coaster , a harmonious blend of sacred geometry and practical design! With a thickness of 4 mm and dimensions of…
Print approx. €0.85–€1.03 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Vector Equilibrium Coaster, a harmonious blend of geometry and practicality! With its approximate 100 x 100 mm dimensions and 4 mm…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
The design of the carabiner is based on the principle of symmetrical load distribution. The central "split-ring" hub serves not only as a visual centerpiece but also as a structural reinforcement for the entire body. Key Features:…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Magnetic vector arrow to help electromagnetism students understand notation for a vector going “into” (X) or “out of” (O) the whiteboard. I remixed the ‘3D Vector’ model by Runningrandall (Thingiverse:…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
A stand for the N1201SA vector impedance analyzer.
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…
Commercial licence I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH A suppressor-style attachment for the CRS…
Had a request for an SMG for the Dummy arsenal and thought I'd do up my personal favorite, the Kriss Vector. Not a design from scratch, but took a really cool model (see link) and made it fit our dummy's hands. The mag extension slots…
First version of a drone based on a 90mm ducted fan capable of hovering using a thrust vectoring control system made of four jet vanes independently controlled by high speed heli servos. The stability is achieved through body angular rate…
An adapted version of the vectored intake wheels to use in FTC with 5mm hex rev shaft. Use of m4 inserts with heat set inserts to pack them close together.
After a long journey through Chief Delphi, Thingiverse, and all sorts of weird vendors, trying to find an easy to print, highly functional Vectored Intake Wheels for FRC robots... I have given up and decided to design my own . . . A bit…
Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…
This is a perfect combo of pure awesomeness and holdable destruction for your 13. There are two files, one for those who would trade detail for complication of print, and one for an easy print. Happy printing… and make sure to earn those…
These mecanum wheels are an adapted version of the vectored intake wheels which can fit an 8mm hex shaft (rex) from gobilda. You can use these mecanum wheels to move artifacts, the elements from the FTC Decode season, from the intake…
You need only a good 3D printer and 8x 3mm screws.
I share with you the mini roni kit that I made for my glock cyma electrica for airsoft, you can make the barrel of the gun in 3D but I recommend putting a metal barrel, the gun was painted satin black. It may be necessary to heat in some…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
These mounts use heatset inserts and M3x6_FHCS, longer M3x12_SHCS x2 are needed to mount to the bed plate. IGUS model: 0_62m_E2_10_10_018_0___E2_100_10_12PZ_A1_4 v2 12links. 3 hole open-back Drag-chain: Updated Y Axis Drag-chain mounts to…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Required: PTFE Tube (Goes between V6 and Extruder) M3…
Angled foregrip cut in a manner to fit flush with the Kriss Vector. This gets your hand further away from potentially engaging the mag release when shooting. Will need an M4 30mm screw and nut to secure to picatinny rail. Printed in PETG,…
VW Beetle shape extruded silhouette 1 and 3mm thickness and vectorial SVG
This model is a custom mount for the MAK Vector Duct for the Flying Bear Reborn 2. The MAK Vector Duct (slim version) uses a 5015 blower for part cooling and fits perfectly into the dimenions of the Reborn 2. Link to the MAK Vector Duct:…
A laser-cut wooden 3D puzzle model of a Volkswagen Transporter T1, showcasing intricate detailing and craftsmanship. Originally published on Atomm . Explore the full project:…
A 360° thrust vectoring unit for 70mm EDF's. The unit should be scalable as it originates from a smaller design, plus you have the ability to tighten the nozzle via a screw helping you with tolerances. The ball joint has an inner diameter…
This is my first version of the Criss Victor (Kriss Vector). The main difference between this and the real one is: The placement of the mag, the placement of shooting mechanism and the stock Print Settings Printer Brand: Creality Printer:…
Was going to install on a plane, but didn't want to disassemble it to install. Its made for a 64mm edf but could most likely be scaled up or down for a larger or smaller edf. Will require 2 servos, I'd recommend at least 9g if using a…
Update 15/05/24: Released Wii Nunchuck Grip which is compatible with this design: https://www.printables.com/model/1295197-wii-nunchuck-grip-extras Update 06/12/24: Added three hollow mags and a cap so that you can fill them with…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
vector • planter modern minimalist planter with geometrical pattern accents designed for contemporary spaces dimensions in mm 100 mm height ~ x • 148 · y • 148 · z • 100 70 mm height ~ x • 104 · y • 104 · z • 70 important filament should…
Print with 0.2mm layer height ASA,PETG or even PLA works fine.
*DISCLAIMER: I do not own this model, I am simply reuploading it. Please give all credit to the original creator, ericshelpdesk. I saw that this model was not on printables so I wanted people to see it here. ORIGINAL DESCRIPTION HERE This…
A vector of the elegant country of france.
Yes, it does come with a rubber sleeve in the box but it is so loose, that it comes off if you just look at it wrong. So i designed a more durable better fitting one. Two files to download to choose from, one with logo, one without.…
*DISCLAIMER: I do not own this model, I am simply reuploading it. Please give all credit to the original creator, Mrheathpants. I saw that this model was not on printables so I wanted people to see it here. ORIGINAL DESCRIPTION HERE An…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Required: PTFE Tube (Goes between V6 and Extruder) M3…
RatRig V-Core3 without enclosure: Led mount Dayspring RatRig VCore 3 LED by Vector3d da Jake90 | Scarica il modello STL gratuito | Printables.com BOM: 2x sup_led_enc (1).stl 2x sup_led_enc (2).stl 4x cap head screw M6x12 4x Tnut m6 3030…
This is a 2in Vectored Intake Wheel(mecanum wheel), Features a 1/2in hex bore. Hardware: 2x 3/4in 6-32 bolts 2x 6-32 nylock nuts Printed out of PLA, but has not been tested on a robot.…
I created this model because I was tired of laying my (airsoft) gun on my desk for cleaning, or modifications. This stand was inpsired by other Glock handgun stands I tried that just were not balanced correctly to hold up my bigger and…
Designed for Vector Optics Maverick GenII (SCRD-12II). v4 front: This new variant has the polycarbonate piece at a slight angle to avoid reflections from the emitter, especially indoors with high illumination levels. Either a friction…
Parker vector body and cap Print this body and cap for the extra nibs provided in the parker vector calligraphy box. Easy and fast to print. No support required.
Exported faces of side panel 3D files in a format useful for laser cutting
I'm working on a raspberry pi laptop and was having a hard time finding design files for the Rii wireless keyboard that some ppl are using for their projects so I designed this for everyone to get some use of it Category: 3D Printing
Another remix of Pfelpensson's GAZ66. This time an electronic intelligent system for searching and positioning of enemy radio signals in the range of 500…9000MHz and a depth of up to 70km. Two version of the vehicle can be printed – on…
Want to learn how to design a 3D print from a logo or graphic? In this video I'll walk you through step by step on my process of taking a vector graphic and turning it into a 3D Model you can print. Follow along here: 2D Vector Logo to 3D…
The Vector Offroad JK E-Dock is a great way to mount electronics in a Jeep Wrangler JK. However, the USB power cables can be unsightly and get in the way. This print adds 4 DC power ports , each with two USB jacks to the top of the dash,…
Hardware 2 × M3 - 30MM Hex Socket Head Screws 2 × M3 - 20MM Hex Socket Head Screws 2 × M3 - 8MM Hex Socket Head Screws 4 × M3 - Nut
I bought a “barely used” RC boat for my grandchild's birthday and didn't notice that the right fin was broken until it was almost too late. A couple of hours of CAD work and test printing and we're ready to head to the birthday party with…
A box for VNA analyzer and accessories
This is a thrust vectoring system that uses micro servo motors and a cytron maker nano to work. The thrust vectoring nozzle is attached to the thrust vectoring module with the 3D printed bolts which fit in the holes. The arms need to be…
USA! Your favorite country now available to download.
This container is basically a remix of the container by nicolas95 but with 4 sides. Also the bottom is a separate print.
The king of corners, now in your pocket. This 3D printable keychain pays tribute to the legendary Mercedes-Benz 190E 2.5-16 Evolution II — the boxy, flared-fender beast that dominated the DTM tracks of the early 90s. With its aggressive…
Have been using for about two months and the top still stays together! Stay tuned for 4 choke variants in the future!
Support Dayspring RatRig LED by Vector3d BOM: 4x cap head screw M6x12 4x Tnut m6 3030 4x heatinsert M3 4x M3x6/8 you can buy it here: Dayspring RatRig LED - Vector 3D Download: led.cfg klipperscreen.conf printer.cfg…
stand kriss vector krytac AEG (GBB kwa test ok) I recommend a border skirt following the trays. 0.2mm layer, 2 walls, 30% infill
These are the XY Joiners made by Vector3D https://github.com/AdamV3D/V-Core-3-Vector3DEdition/tree/main/Printer combined with the clamping mod of MFBS. https://www.thingiverse.com/thing:4947482 I changed the hole size back to 5mm and…
These vectored wheels are made for FTC robots and are designed to work as an intake system. The rollers fit ¼” inner diameter and 3/8” outer diameter silicone tubing, which gives good grip on game elements. The support pins for the…
Customized optional parts for the Gears Vector by Gears13th. The BCAR utilizes the original geometry from Epicxxxx and is mated to the seating system from Gears13th. The open muzzle notch is on the top. If your top notch is not top dead…
Gojo Satoru portrait from Jujutsu Kaisen anime - minimalist flat vector design optimized for 3D printing. Perfect wall decoration piece for anime fans. Design Features: ✨ Clean closed contours - optimized for 3D printing 🎨 High contrast…
I had a problem which required me to transform some vectors from Cartesian to Cylindrical. Of course I would just use my right hand and then twist my wrist around to match the vectors on my computer screen. But all that twisting started…
Bracket for 3030 profiles to mount the Daylight/Daybreak lighting at a 45 degree angle. M6 12mm screw for profile mounting with T-nut. M3 Heatinsert for mounting the lighting - length almost does not matter. Mine had a length of 5mm and a…
This is a remix of crate and bottles from 'Badger' at https://www.thingiverse.com/thing:21819 with Vectors cube from VectorBits.uk at https://vectorbits.uk/vector-3d-printed-cube-stl-files/ (this site is not currently up). I also added…
Lighted charger logo for Anki Vector Assembled with a little bit of glue Print Settings Printer: Flux capacitor Rafts: No Supports: No Resolution: 0.2 mm Infill: 25% Filament: FiloAlfa Pla Category: Robotics
These are some of the basic files that helped me create all of my shroud variations. Design your own or print Shroud1 to replace the original shroud. Included is a m-lok shape that can be turned into a hole in your CAD software for m-lok…
An upgradable / customizable playground for the two Anki Cozmo and Vector robots. Nothing fancy ; just print and connect. Connector slopes are used to avoid printing full center plates. Print Settings Printer Brand: Creality Printer:…
MAK Vector Duct holder with added BLTouch
A simple marker carrier for the Anki Vector robot, suitable for people who want to use Vector as a physical "logo turtle" through his API. I'm not aware of any software that would enable that, but if I find or write any I'll post links…
Vectomi - created from vector 3D cube and Ortomi You need a Ortomi in here . The shipping is a little slow, it took a month to reach me though. You also need: 8x 3x2 magnet (diameter: 3mm, height: 2mm) (you can use glue instead) Glue For…
A simple set of drill guides for 1U and 3U EuroRack rail positioning. Designed for Vector T-Strut: https://www.vectorelect.com/ts100.html . T-Strut doesn't have 'lips' for top and bottom edges of the panel so spacing is a bit tricky to…
Bonjour, Voici une pièce de remplacement pour votre réplique fusil d'airsoft GBB GBBR KRISS VECTOR de chez KWA. Cette lèvre de chargeur ou mag-lip est une pièce introuvable mais heureusement l'impression 3D est là ! Je n'ai pas réussi à…
Update 12/5/25: Added a new V2 version with improved extended design. Models are print oriented and do not require support. You can adjust the scale in your slicer to achieve the perfect friction fit or add a drop of super glue to keep in…
The still very competitive horizontal spinner Vector produced by Jeffrey Olijar of Endbots is unfortunately not currently available, though the Thingiverse file still exists for the printed parts. The original ran on brushed 24mm gear…
A remix to allow for the use of a HGX Lite (or Sherpa Mini, though untested), CR-Touch with the MAK Vector duct, and adds a mount for a 30mm fan onto the duct. The mount piece has also been extended slightly for an easier fit of the…
Started with MHP Moose Mod Vector, remixed to all metric hardware, assorted M5,M4, M3, M2 bolts needed. Remixed to work with OOD solenoid instead of the more difficult to acquire FTW hyperdrive. My personal solenoid was not symmetrical so…
Imported From Thingiverse: A "cat brush" (requested by a coworker) as an attachment to Vector robot, also compatible with Cozmo If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great…
A cap for Parker Vector fountain pen. Should work well both with the printed body (from the original model) and with original Parker Vector bodies. Should snap easy and firmly. Print instructions: When using Prusa Slicer I got best…
This is a wall spacer for a Dimplex Linear Convector (LC) Baseboard Heater. It is used to keep the baseboard away from the wall and improve convection and reduce wall temperature. I moved into a house that had three of these installed and…
A simple frame to hold a pair of vector rails (TS100 series) at the proper spacing for eurorack panels. This is a quick design I made in order to begin prototyping a rack system while I build a more permanent case. It turned out well…
Imported From Thingiverse: A Fork and Pallet attachment for Vector Robot, also compatible with Cozmo If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
This is a remix of Vector3d's VLMP soldering iron holder. I found the basic holder kept pushing the soldering iron out of the holder when I applied downward pressure. This adds adjustable screws to increase the tension. You will need the…
I really liked the model by Jevermeister , but it is for the 3.0 version. I combined that with the 3.1 version of the original mod, using TinkerCad. It has some rough spots, but works. I like that the spacers are not used and that it…
A little garage for your cozmo or vector
If you're hooked on the Homestar Runner flash cartoons like I am, let the world know (or at least confuse them) with this keychain! Designed for a color swap. The print should be straightforward other than that.
Remix of the popular Endbots Vector beetleweight (3lb) combat robot with numerous improvements.
stand kriss vector kwa gbbr airsoft. recommend a border skirt following the trays. 0.2mm layer, 2 walls, 30% infill
Imported from Thingiverse : A Skidsteer bucket designed for Vector robot by Anki, compatible with Cozmo If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
![anki cozmo /vector house hut cover [wooden cabin]]](https://media.printables.com/media/prints/969432/images/8226887_262b7d6a-80e5-48d0-953d-8c26a08cd99f_c9c2f637-7091-422a-b6e8-21f319a32b89/wood-1.png)
