Venus de Milo
Original Part : https://www.thingiverse.com/thing:196037/files
- Downloads
- 3,582
- Likes
- 327
- Rating
- 4.95
325 models
Original Part : https://www.thingiverse.com/thing:196037/files
Amazing model that is print in place and that can be opened and closed by twisting the outer shell. Scaling is not advised, as the clearances and the functionality of the mechanism get compromised. Print instructions print with 0.2 mm…
Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…
Desktop and pendant lamp with cableholder function. Lamp shade inspired by the surface structure of the temple of venus and roma in italy. https://www.instagram.com/made3d.de/
3D scan of the Venus of Willendorf optimized for 3D printing. Found in 1908 at the site Willendorf II, the object appeared in an archaeological layer datable to 29,500 BP. Measuring 11 cm, the figurine – made of oolithic limestone –…
Venus Head Bowl / Planter
I cut the great scan into two pieces exactly where the original sculpture was assembled from two pieces. This allows printing a tall enough size to appreciate the scan. You can maximize the top size and drop the bottom down to fit the…
Very good 3D data in STL format. My print condition: Layer height: 0.16mm Support: tree Print Speed: 80mm/s nozzle: 0.4mm material: PLA temp: 200degC/65degC infill: 20%
This Venus de Milo model was made by Revopoint POP. If you want to get more models like this, please try to use 3D scanner POP: https://bit.ly/3xb37c3 The accuracy of Revopoint POP is up to 0.3mm. It's very suitable to scan sculptures for…
There are 4 versions. 1-cup (48mm), 2-cup (52mm) and 3-cup (55mm). Venus (61mm). I hava also made a funnel to make it easier to not make mess (check out my other designs) :-) It is only intended to collect the coffee in the funnel, not…
Reupload from Prot0typ1cal on Thingiverse. Variation on classic iris box with clamshell doors instead of petals.
Este modelo 3D está inspirado en la famosa estatua griega Venus de Milo, reconocida mundialmente como símbolo de la belleza clásica y el arte helenístico. La figura representa a la diosa del amor y la belleza, Afrodita, en una postura…
Venusaur model ripped from the Pokemon X/Y game files.
If you download the model, please don't forget to leave a like. Thank you! <3 Discover the impressive form of Venusaur with this low poly 3D print, portraying this iconic Pokémon in sharp, geometric lines. This modern design captures…
Holder for Gilette Venus razor which does not need the razor head for holding. Low profile to allow any water to drain away.
This is a self watering planter designed primarily for a Venus Fly Trap but could be used for other plants as well. It is printed in two parts, an inner liner that can be lifted out and and outer body. The liner has ribs around the bottom…
Make your own Low Poly 3D models using my 3D Low Poly Generator ! Check out my Amazon Page to see what kind of gear I use to make these models. This is a remix of 'Venus de Milo at The Louvre, Paris' , found on MyMiniFactory .
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-on-Support) Scale it as you like :)
Originally published here: Venus with known topography scaled one in sixty million by tato_713 - Thingiverse This model was made using MATLAB R2016a with the data from the Magellan mission available in the USGS site. The original map has…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
A Venus flytrap rendered as a catchall bowl: two toothed jaws open upward to swallow keys, coins, guitar picks, screws or whatever ends up in your pockets. The interlocking teeth around the rim keep small items from bouncing out, and the…
Základní 2 části (podstavec a soška) byly připraveny pomocí volně šiřitelného programu ZBrushCoreMini, následně exportovány do OBJ souboru. V Tinkercadu pak importovány a vše bylo upraveno pro export do STL souboru pro 3D tisk. The basic…
This is a Venus Fly Trap that is compatible with my springy flower collection found here: https://www.printables.com/model/1100526-springy-flower-collection-update . I had a few requests for a Venus Fly Trap so I gave it a try. It guess…
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
A travel razor guard for the Gillette Venus Comfortglide cartridge razor.
Edited https://creazilla.com/nodes/74126-venus-kalyppigos-3d-model Print Settings Printer: Kywoo 3D Tycoon Rafts: No Supports: Yes Infill: 15
Hi, this is a lithophane lamp based on imagery and elevation data by NASA. Some parts of the surface remain unknown and were filled with fictional data, accoridng to www.solarsystemscope.com where you can get a high resolution image of…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Quick print that solves the problem of razorblade and protectionpads wearing out prematurly. Snaps on to the shower pipe. Mount it high up to keep it out of the water.
Design Concept The Venusaur Fossil model reimagines a classic creature as an archaeological artifact, combining nostalgia with a paleontological twist. Purpose This model is perfect for collectors, fans of classic monsters, and…
Material PLA or PETG (more flexible then PLA). Holes ø 4 mm. Wheels in progress.
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
This is a self watering planter for a Venus Fly Trap plant (why not for any other plant, but keep in mind this keeps the soil really moist)! https://www.youtube.com/watch?v=RnBGHWWU8xE The planter is self watering, you pour the water in…
Die Venus von Willendorf ist eine 1908 entdeckte, rund 11 cm große und knapp 30.000 Jahre alte Venusfigurine aus dem Gravettien. Die Skulptur stellt eine nackte, adipöse Frau dar. Ein Gesicht fehlt. Der Kopf ist groß, trägt eine Frisur…
Well, I wouldn't actually recommend using this as a mouse trap - too many things to go wrong that might maim the mouse. However, it is a pretty fun mechanism for, say, trapping errant ping pong balls. See it go: Printing Print 5 of the…
Model Věstonické venuše s upraveným podstavcem pro lepší tisk
Diseño Sailor Venus, conocido como Minako Aino, es un personaje icónico en el mundo del anime y manga, y este modelo captura su esencia de manera excepcional. Uso Ideal para coleccionistas de figuras de anime y especialmente fanáticos de…
Part of the “Venus” collection, this vase combines elegance with functionality. Perfect as a decorative piece, it can hold dried flowers, fresh flowers (with an inner container), or simply serve as a stylish design element. Its curved…
Material: PETG/PLA Infill: 15% grid Supports: Yes Layer height: 0,2mm 2 walls
Make your own Low Poly 3D models using my 3D Low Poly Generator ! Check out my Amazon Page to see what kind of gear I use to make these models. This is a remix of the sculpture 'Venus Italica' by Antonio Canova, originally uploaded by the…
Texturized 3D model: https://skfb.ly/otOJV 3D scan of the original Venus of Willendorf optimized for 3D printing. Found in 1908 at the site Willendorf II, the object appeared in an archaeological layer datable to 29,500 BP. Measuring 11…
“Antonio Canova's famous Venus Italica was commissioned as a replacement for the famous Medici Venus”
Die kauernde Aphrodite gilt als Werk des hellenistischen Bildhauers Doidalses. Sie entstand vermutlich um 250 v. Chr. und begründete, nach der Aphrodite von Knidos des Praxiteles, einen zweiten Typus der nackten Aphrodite in der Kunst der…
Low poly Venusaur, the final evolution of Bulbasaur. A powerful Grass/Poison Pokémon in a geometric 3D style.
Print Parameter: Layer: 0.16 Wall: 2 Infill 8% Support: Yes
I have been running Victron Venus OS on a raspberry pi to manage my Inverter, Solar, Batteries, etc in my Fifth Wheel RV. I decided that I needed to create my own case as I added a 6 port relay which integrates into the Venus OS and…
Stick to the shower wall with some double-sided tape.
Vytisknuto pomocí Kywoo 3d, REGSHARE PLA, 0.4mm, detail 0.12mm.
Today I bring you this awesome Venusaur string art model 🔥 I hope you like it as much as I do! For a correct print, you must set 0.20mm layer height, and Arachne wall generator. Consider to enable prim as the leafs are pretty thin. NO…
All credits for the original (amazing) venus model from Venus de Milo by CosmoWenman Something fun and elegant(?) to print for your personal art gallery. Printed with Filament : Marble PLA Infill : 7% Gyroid (Check the original venus…
for this model I used the Venus de Milo statue in Blender to transform it into low poly form.
This 1:1 Venus Statue model was scanned by a Revopoint POP 2. If you want to get more 3D models like this, please back the Revopoint POP 2:…
Model je určen pro sběratele, nadšence do Pokémonů nebo jako výstavní kus v tematických prostředích, zachycující podstatu známé postavy Pokémonů.
Wanted a lay&play type set-up that was also shake/transport proof, assuming the lid is secured or unable to easily come off. Every piece uses other cards/boards as lids to the container, which I am very happy with. I've taken the game box…
This is a watch stand I designed for the Garmin Venu 2 and 2 Plus. This uses the standard charging plug that comes with the watch. I also added a hole that goes through the stand for the plug, the pictured version doesn't have that. The…
Věstonická venušeje keramická soška nahé ženy vyrobená z pálené hlíny pocházející z mladého paleolitu datovaná do období 29 000–25 000 let př. n. l. Tato figurka (spolu s několika dalšími z okolních lokalit) je nejstarší známá keramická…
A small and modern stand for the Garmin Venu 2 smartwatch. I have made the model Specifically for the 45mm version of the watch. At the bottom of the stand, the charging cable can be threaded in, and attached by the clip on the side. You…
A charging puck for your Garmin Venu 3. BoM: 1x Printed top 1x Printed bottom 2x BT2x5 self tapping screws ( https://shorturl.at/pOuHN ) 1x Garmin to USB-C adapter ( https://shorturl.at/GV8mV )
Venus Figure ofLangenzersdorf
The funnel fits the Bialetti Venus 4 Cups Version. The inner diameter is 64,20mm, so please leave a comment if it fits also other Bialettis. I printed it PETG with 20% infill and a layer height of 0,2mm.
Inspired by the Esoteric Order of Gamers foamcore insert which I had built and used for a long time. I took the culture storage & display trays as the starting point and built a 3D printed organizer around that. The culture trays leave…
The source marked this model as adult content.
This is a multimaterial remix of Bulbasaur - realistic by and Greg and Bulbasaur - realistic Multimaterial by Me and Poinsettia Ornament by Keenan ( https://www.thingiverse.com/thing:194811 ) I wasn't sure exactly what to named it so…
A remix of a funnel posted by Bob: https://www.prusaprinters.org/prints/82031-bialetti-venus-funnel rescaled in X and Y by 113,55%. Fits my Bialetti Venus moka - 6 cups version. I've printed it on my MINI+ using PLA with 0.2mm layer and…
I wanted a holder for a Gilette Venus razor that holds on to the shower wall glass, so I made a remix of Loewekordel holder. The thickness of the glass is about 3mm. - Ich wollte einen Halter für einen Gilette Venus Rasierer der an der…
This 3D-printed Roll-it Venus Flower Stamp is perfect for creating intricate floral patterns on your pottery, clay projects, or baked goods. Easy to use—just roll it gently over your material to leave behind a detailed Venus flower…
I wanted a stand to clip my Garmin Venu Sq watch into, at an angle that made it handy to look at the watch when charging. Print in PLA, 15% lightning infill, flat on the base of the stand, with some tree supports on the build plate only.
Step back in time with this 3D-printed inspired replica of the Venus of Dolní Věstonice , an iconic prehistoric artifact from the Paleolithic era. Standing at 11.5 cm tall , this detailed sculpture beautifully captures the essence of one…
For this model, if you use the same size as provided in the file, the color change occurs at layer 9. I used CURA for its formatting. The speed will depend on the machine and the type of PLA you are using. I always recommend that the…
I made the 4 cup tamper (gray) in January and the others (blue) a few weeks back. My father own the 10 cup one, so I have checked that it fits I use them pack the ground. You're not supposed to press hard
This is a lowpoly remix of the Venus with the Apple sculpture from "Scan The World". The sculpture was originally made by sculptor Bertel Thorvaldsen (1770-1844) The .gcode file has some supports but they are very easily removed. Feel…
Tight fit, doesn't move once secured. Printed with TPU 96A. Original product
My wife has been using these razors for years but hates the way they travel. This lid attaches to the refill retail packaging after it's opened and makes the razor travel-ready. Prints without support in whatever rigid filament you…
This statue is part of an extensive series of ancient copies based on a very famous original (now lost) from around 400 BC, attributed to the sculptor Kallimachos. Aphrodite (Venus to the Romans) holds an apple in her left hand, the prize…
Tl;dr: I’ve made a Venusaur coin from the Pokemon TCG Pocket app. I’ve included a whole bunch of info if you want to print it as accurately as possible to how it looks in the app, but at the end of the day, you can probably get away with…
Print Settings: Layer heights: 0.15mm Wall Loops: 3 Infill: 15% Attached photo of print was printed using a SV06 w/klipper, using SIDDAMENT PETG CF Green V2, which can be found here: https://siddament.com.au/products/petg-cf-green Thanks…
It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean a lot to me if you could download…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
I found this beautiful high resolution scan of the head of Venus de Milo at http://www.deskproto.com/support-videos/videos-venus.php and was quite surprised that it hadn't found its way onto Thingiverse yet. Their website does state that…
Based on my Vivoactive Charging Dock , I made this dock for the VenuSQ. This part prints without supports and uses the supplied charging cable. The stand is fairly high for two reasons: So that the armband hangs nicely, and so you can…
Made to work with a stand for the basket. Allows for simple filling of the basket with ground coffee.
A personal project that I'm sharing now in hopes that it'll be useful for someone. This is for the older model of Bialetti Venus 2 with plastic lid hinge (newer models use metal). Note that this is a full replacement of both the handle…
Modded Gillette Venus Razor Holder by Bebbo to fit a 25mm shower tube. Also remixed one more sturdier with more space between the tube and the razor to better fit the angled type razors. Added pegs for better retention.
Venusaur model with screw to screw in self-standing articulated pumpkin. Made it modular to be printed with diffent filaments, or as a standalone articulated toy
Creation of the logo of the brand VENUM. 2 files to print one for each color. The Bottom is version 2 to get decrease the gap between the top and the bottom. Top - PETG black Prusament (flip 180° to get a better surface). Bottom - PLA…
The original designer wasn't sure if it fit a 2022 Hyundai Venue “ Essential ” and I'm happy to say it does. He did a great job designing this. I printed it with “ supports touching build plate ” with generic PLA @ 70% infill. I'm not…
Cover for Venus razor 5 blades
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…