Search results: victor

Sort order

589 models

P
PrintablesDarthDeezy

Fortnite Victory Crown

Full crown, or split pieces for no-supports printing. Use settings of your choice for your desired filament. For the split_top printing (llama's head), place on build plate so mouth points up, and use max fan for the steep overhang on the…

Downloads
15,896
Likes
948
Rating
4.88
P
Printablesbrownie2705

Victorian style Picture Frame

This is a Victorian Style Picture Frame, it was made for the PrusaPrinters 3D Contest. I thought about what kind of Frame i would like to print and something came in my mind. This Frame is a very detailed and big print with a lot of…

Downloads
3,078
Likes
717
Rating
4.93
P
PrintablesLorenzo

Victorinox Swiss Army Knife 91 mm scales

Replacement scales for Victorinox Swiss Army knife 91 mm. In the files section there are a few different variants, in particular with and without the slot for the toothpick and tweezers and with and without the Victorinox cross logo; as…

Downloads
1,806
Likes
234
Rating
5
P
PrintablesUliLac

Victorinox Swiss Army Knife Pocket Clip

Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…

Downloads
1,608
Likes
173
Rating
4.92
P
PrintablesShpooople

Baroque / Victorian Picture Frame A5 (210 x 148 mm) (Updated: now with stand)

This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…

Downloads
1,580
Likes
339
Rating
5
P
Printablesrshelvo

fortnite victory crown

its a crown from when you win

Downloads
1,349
Likes
121
Rating
0
P
PrintablesMartin Rigatoni

Victorian-Style Lion Head Knob

The knob was modeled based on some Victorian-style reference pictures I've found online. There's a 65° overhang on the underside. I'd suggest printing with lower layer heights for less drooping. Attach it using an M4 bolt.

Downloads
1,152
Likes
309
Rating
4.91
P
PrintablesHolzerMax

Victorinox Toothpick Replacement 50mm - actually good quality model

As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…

Downloads
1,150
Likes
210
Rating
4.9
P
PrintablesPunkelopment

Victorinox 84mm scales

I had sale this models on Etsy for some time but now it's free!

Downloads
1,147
Likes
109
Rating
4.6
P
PrintablesAles

Victorinox Dual-Knife Sharpener angle holder

This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…

Downloads
1,033
Likes
51
Rating
4.8
P
Printablesdtxtr

Fake Kydex: Folded Universal Sheath for Victorinox Fruit Knife

Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…

Downloads
914
Likes
183
Rating
4.78
P
Printableslacop

Victorinox small toothpick

Mine snapped in half after many years of use. Here is a simple replacement. Printed in PLA, with 0.05mm layer height. Lifted off the build plate without a brim so I recommend turning that on. PS: I only use this to clean out my phone usb…

Downloads
869
Likes
292
Rating
4.56
P
PrintablesSablebadger 3D

Victorian Style Shelf Brackets - 4" shelf

My wife likes Victorian things, and we found these awesome faux-Victorian iron shelf brackets in a shop a while back. I needed to make some small shelves for the same area of the living room so I decided to make some smaller brackets in…

Downloads
867
Likes
293
Rating
5

Goddess of Victory Statue

She involuntarily raises her hands in conquest, exuding dominance over her defeated foes. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…

Downloads
820
Likes
147
Rating
5
P
PrintablesSalvador Rueda

LUCKY 13 ✌️ victory hand

Another remix of hands because I think it conveys a lot of emotion. The model is far from perfect but it works for me, maybe it's time to start to learn 3D modeling seriously. It's really amazing and funny. Thanks to soozafone for their…

Downloads
741
Likes
276
Rating
5
P
Printablesblecheimer

Fortnite Victory Royale - 3D Puzzle

Celebrate your latest epic victory with this printed 3D puzzle of the Fortnite Victory Royale sign! This is a tough print. Your printer must be calibrated and you really need to deburr all parts thoroughly after printing. I recommend…

Downloads
737
Likes
160
Rating
4.5
P
Printablesbunnyology

Hand with Attitude: Victory

This model serves no other purpose other than placing a statement right on your office desk. Works also well as trophy or cup or simply as a gift. Printing Instructions Print without supports- no steep overhangs. However, I recommend…

Downloads
656
Likes
78
Rating
4.83
P

Gothic Victorian Bookshelf Design

Easy to print 15% Infill No Supports For Commercial License: MonochromeDesignStl | Patreon

Downloads
644
Likes
296
Rating
0
P
Printablesmoebio

Victorian Country House

Two stores Victorian Country House. I modeled the house as the main project for this amazing course: https://www.domestika.org/es/courses/1544-diseno-e-impresion-3d-de-maquetas-arquitectonicas/course I found the blueprints from a real…

Downloads
614
Likes
159
Rating
5
P
Printablesblancomamba

Fortnite Victory Crown Croc Charm /Jibbitz

Fortnite Victory Crown Croc Charm /Jibbitz

Downloads
586
Likes
55
Rating
3.67
P
Printables_Building_Arts_

Nike of Samotrace - Winged Victory of Samothrace 60 cm tall

I've scale the model up to be 60 cm tall, then I mod the base, cut the model in 7 pieces ad lock pin and paint support for each piece.

Downloads
584
Likes
113
Rating
4.8
P
PrintablesPYC3D.ES

MARIO BROS VICTORY KEYCHAIN

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE MARIO BROS VICTORY KEYCHAIN This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain is…

Downloads
577
Likes
97
Rating
5
P
PrintablesGeekSculpt3D

Corpse Bride – Victor & Emily

From Tim Burton’s hauntingly beautiful film Corpse Bride , this collectible figurine brings to life the unforgettable duo: Victor and Emily. Victor, nervous and hesitant, stands with his signature timid charm, while Emily, the Corpse…

Downloads
550
Likes
128
Rating
5
P
PrintablesPeter Farell

Winged Victory of Samothrace

Winged Victory of Samothrace -Added head and arms in my own imagined version of what it would have looked like in its original unbroken form. Historical design considerations considered but not thoroughly studied. Love to hear from some…

Downloads
513
Likes
108
Rating
0
P

Goth Mini Bookshelf Victorian Style Bookshelf Decor

Print standing Tree Supports 15% Infill Have fun :) For Commercial License: https://www.patreon.com/cw/MonochromeDesignDE

Downloads
499
Likes
194
Rating
0
P
Printables3DCraft

Vecna’s House – Stranger Things Inspired Victorian Mansion

A detailed 3D model inspired by Vecna’s house from the Stranger Things series.

Downloads
493
Likes
44
Rating
0
P
PrintablesPistonPin

TweezPickVic - keyring container for 45mm Victorinox tweezers + toothpick

The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers

Downloads
489
Likes
95
Rating
5
P
PrintablesKubak

Babylock Victory waste collector

One of my first designs. Guess it could be improved, but it works.

Downloads
481
Likes
26
Rating
4.83
P
PrintablesPunkelopment

Victorinox microscrewdriver blank

Victorinox microscrewdriver blank

Downloads
460
Likes
74
Rating
5
P
PrintablesLowres

Victorinox Knife Scales 58mm Swiss Army

Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools

Downloads
452
Likes
63
Rating
5
P
Printablesvisualplastik

Victorinox 91mm ruler scale

NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.

Downloads
448
Likes
71
Rating
4.25
P
PrintablesKellye Pilon

Fish Scales for 91mm Victorinox Deluxe Tinker

Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.

Downloads
446
Likes
96
Rating
4.8
P
PrintablesWekster

Batman - Steampunk/Victorian edition

If you like this kind of stuff please check my patreon page www.patreon.com/wekster

Downloads
432
Likes
142
Rating
5
P
Printablesvisualplastik

Victorinox 91mm Precision Bit Holder + Driver Scale

MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…

Downloads
431
Likes
81
Rating
5
P
PrintablesMiniMakerspace

HO Scale Victorian House

This house is modeled after the last image included the photos section. It is currently modeled in HO scale but could be easily scaled for a different size. Instructions for how to print/assemble this model can be found here:…

Downloads
428
Likes
110
Rating
5
P
Printablesvisualplastik

Victorinox 91mm Whistle Scales

I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…

Downloads
428
Likes
64
Rating
5

Victorinox Kitchen/Snack Knife Sheath, Blade Protection

I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…

Downloads
420
Likes
76
Rating
4.8
P
PrintablesPaolo

HMS Victory Cross Section

Over a meter tall model of Nelson's flagship. Easily printable model with few organic supports with layers of 0.1 and 0.15 To make the rigging I used 1.5mm modeling rope and a thinner one for the linkage. To create the upper meshes of the…

Downloads
418
Likes
94
Rating
0
P
PrintablesJamie Anderson

Fortnite victory crown sprite

the victory crown sprite

Downloads
380
Likes
14
Rating
0
P
PrintablesNigel Kroiter

Victorian License Plate

License plate templates for Victoria, Australia. Both standard and slimline plates. Can be downloaded here or edited directly in Tinkercad (link below) I printed in ABS for better weather tolerance, but any filament would work depending…

Downloads
373
Likes
2
Rating
0
P
PrintablesLeDomme

Victorinox 58 mm Scales

Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…

Downloads
352
Likes
33
Rating
5
P
Printablesdudedarnell

Jetblack Victory Rocker Feet

A reupload from MakerWorld of this model by Schichtkunst , which itself is a variation of Tennis ball rockers for Wahoo Kickr Core by adze I had success printing on my MK3S with 0.3mm layer height, 0.6 mm nozzle in PLA. I used 3…

Downloads
351
Likes
16
Rating
0
P
PrintablesOliver Syp

Victorinox SAK 6mm hex bit driver

I made this hex bit driver 6mm (1/4 inch) so I could use my Victorinox SAK as a repair screwdriver. No supports required but you might need a brim. Versions There are two versions one for 91mm like the compact, huntsman and the other one…

Downloads
351
Likes
69
Rating
4.5
P
PrintablesTech Napa

Victorian-Style Pendant with Skull | Pendantif de style Victorien avec crâne

ENG : This STL file is for a Victorian-style pendant featuring a detailed skull motif. It combines ornate floral patterns and intricate scrollwork, reflecting the era's fascination with mortality and elegance. Designed for 3D printing,…

Downloads
340
Likes
91
Rating
5
P
PrintablesTimon

91mm Victorinox swiss army knife scale with toothpick/tweezers

Customizable scales for a Victorinox knife with space for toothpick/tweezers

Downloads
334
Likes
44
Rating
5
P
Printablesthe_algar

Clip-on Baroque Victorian decor for IKEA Rodâlm frame

Transform your IKEA RÖDALM 21x30 cm (8 ¼x11 ¾") frame with this ornate clip-on Baroque/Victorian-style decor! Designed for easy 3D printing and effortless assembly – no glue, no connectors, just clip it on and elevate your frame in…

Downloads
332
Likes
90
Rating
5
P
PrintablesTom Haynes

Victorinox SwissCard pocket knife case replacement

I broke my SwissCard pocket knife case about every 6 months. The small glued joints near the knife seemed to fail first. This is a FDM printable replacement. I have used it for 2 years now without any failures. After printing you can…

Downloads
305
Likes
44
Rating
4.5
P
PrintablesFujima

Victorinox pocket clip V1 more ergonomic

Thickened some parts, removed overhang on the side as much as possible to make it more ergonomic. You still need small touchup to remove sharp edges digging into your palm. I recommend using stiff filament for this. I printed with 0.6…

Downloads
304
Likes
35
Rating
4.8
P
PrintablesJáchym Tiskne

Victorinox tomato knife cover

Print it laying on the site, the printer will bridge “across the blade.” If the blade doesn't go in, check the bridging direction and if needet adjust the angle of bridging in the infil tab (PrusaSlicer). If it still doesn't go in, lower…

Downloads
300
Likes
36
Rating
5
P
PrintablesJustABiomedEng

Emergency toothpick card - Victorinox inspired

This is a simple credit card sized toothpick collection for emergency use. It fits 11 single toothpick and they are easy removable from the frame. They can be used also in all that difficult situation where you need something thin to…

Downloads
293
Likes
55
Rating
5
P
PrintablesVger1981

Victorinox Classic 58mm scales

Use a 3,2mm drill bit with a flat tip to clean the holes for a better fit. Scales should snap-on without a glue.

Downloads
278
Likes
49
Rating
2
P
PrintablesAlaize0013

Victorinox deluxe tinker beltholder

Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !

Downloads
277
Likes
63
Rating
4.4
P
PrintablesRJ Tan

Victorinox 58mm Scales

Victorinox 58mm scales with slot for pen, tweezer, toothpick and 2 pins/needle. One more slot is available for toothpick based tool.

Downloads
277
Likes
26
Rating
0
P
PrintablesMFM15

Victorinox/swiss army knife multitool stand

Stand for 91mm swiss army knife multitool.

Downloads
275
Likes
40
Rating
4.8
P
PrintablesDarMatan

Fortnite Victory Royale

Made on Fusion360 from a picture downloaded from google.

Downloads
265
Likes
53
Rating
5
P
PrintablesNoX the FoX

AAP 01 Criss Victor (Kriss Vector) conversion kit (With integrated silencer!) WIP

This is my first version of the Criss Victor (Kriss Vector). The main difference between this and the real one is: The placement of the mag, the placement of shooting mechanism and the stock Print Settings Printer Brand: Creality Printer:…

Downloads
261
Likes
62
Rating
0
P
PrintablesBen Kraas

Victory point

I made this token inspired by the game "Catan" and since I couldn't find a model with a floating star in the middle I decided to make my own. Since I modeled this in Blender and honestly don't know how to make CAD style models in this…

Downloads
254
Likes
50
Rating
4.8
P
Printablesvisualplastik

Victorinox 91mm Corkscrew Pocket Clip

Simply screw onto corkscrew to attach.

Downloads
252
Likes
29
Rating
3.5
P
PrintablesShoaib Ejaz

Ford Crown Victoria 1992 – Detailed 3D Printable Car Model (STL)

This is a highly detailed 3D printable model of the 1992 Ford Crown Victoria , a classic full-size American sedan known for its iconic boxy design and legendary durability. The model is designed for 3D printing enthusiasts, collectors,…

Downloads
251
Likes
14
Rating
5
P
PrintablesPiotr Zazakowny

Victorinox toothpick replacement

Small things tend to disappear occasionally. Same happened to a toothpick in my folded knife. This is quite tight replacement piece I fitted into my knife.

Downloads
247
Likes
52
Rating
4.75
P
Printablesdv

Victorinox pocket knife sides

Print with your favorite color/filament and customize your victorinox pocket knife! Very simple to install, just remove the old ones and push the new ones in, just a simple pressure fit works well. Victorinox pocket knife dimensions:…

Downloads
244
Likes
53
Rating
5

Keychain Name Mila, Angel, Sindo, Victoria

Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…

Downloads
243
Likes
25
Rating
0
P
PrintablesReProps

Victor's Gear From Arcane S2

Probably not the most accurate but not bad from being modeled from a blurred photo. I swear next ep we'll have a good closeup of it and I'll have to remodel it. I'd print it periductular to the build plate or split in half hamburger style…

Downloads
241
Likes
54
Rating
5

Victor - Interlocking puzzle by Stewart Coffin (STC #201)

Victor Interlocking puzzle by Stewart Coffin (STC #201) Assemble the six pieces into the polyhedral shape shown in the photo. Victor is a polyhedral puzzle descended from earlier Coffin designs such as Star of David , Rosebud , and…

Downloads
238
Likes
33
Rating
5
P
Printablesbobmagoo

Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife

Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…

Downloads
227
Likes
17
Rating
5
P
PrintablesLeopoldo

Sharpening guide for Victorinox diamond sharpener

Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.

Downloads
227
Likes
25
Rating
0
P
PrintablesLZ1FLY

Victory Motorcycles Emblem

Scale it up because it has small letters and 0.4 nozzle will struggle.

Downloads
224
Likes
15
Rating
5
P
PrintablesMaxd94

**Victorian Staircase Corner Shelf**

Ein kleines Wandregal wie eine viktorianische Miniaturtreppe. Zwei Podeste auf unterschiedlichen Höhen, gedrechselte Geländer und verzierte Doppeltüren machen aus einer Außenecke eine kleine Bühne für Miniaturen oder leichte Deko. Das…

Downloads
215
Likes
21
Rating
0
P
Printablesjs500

Obsession Victorian Box Insert / Organizer - Fits Playmat, Rules Compendium, and All Expansions to Date

This is an insert / organizer for the Obsession Victorian Box (big box) with the playmat, consolidated rules compendium, and all the released expansions through Characters (but see the excluded, mostly redundant items listed below). It…

Downloads
214
Likes
37
Rating
5
P

Beetlejuice Victorian Earrings

Beetlejuice Beetlejuice Beetlejuice! 🪲 Here's a pair of classy Beetlejuice earrings for Halloween. I saw these on Amazon but the Victorian style outer frame was lacking a lot of details, so I recreated them! Enjoy! This model is ideally…

Downloads
211
Likes
105
Rating
5
P
PrintablesVirtuallyJason

Scythe Victory Token

I really liked how the Popularity Token came together, so I decided to make a Victory Token to match. This was a quick and easy one - I just made a star (create a 10 sided circle then scale down every other vertex to make the star. Once…

Downloads
211
Likes
61
Rating
5
P
Printablesmr.rioes

Victorinox Swiss Card EDC Box

A small box for your EDC gear with a Swiss card as lid. Size is similat to an Altoids tin but a bit taller for more space. Printer: Ankermake M5 Layer: 0.2 Infill: 25% Supports: yes, organic Feel free to edit.

Downloads
206
Likes
36
Rating
5
P
PrintablesMajor Obstacle

Hegemony - Lead Your Class To Victory Insert

This insert fits inside the main game box with only a small amount of lid lift. It accommodates sleeved cards and will allow the box to be stored on edge. It is designed to streamline setup by splitting the components up by class where…

Downloads
205
Likes
20
Rating
4.67
P
PrintablesAHoopyFrood

Victorinox 8-in Chef's Knife Cover

A blade cover I initially made as part of a gift. I've removed the monogram from the stls but have included the 3mf file so you can put your own in.

Downloads
204
Likes
27
Rating
5
P
PrintablesD. Harris

Victory at Sea Ship Bases

Blank bases of various sizes for Victory at Sea

Downloads
204
Likes
4
Rating
0
P
Printablesyeawrongperson

Victorian Style Scalable Brackets

Print it laying down on it's side with “auto tree supports”. Printing laying on it's side is best for adhesion and strength between layer lines. Use a brim to reduce possibility of it lifting.

Downloads
203
Likes
76
Rating
0
P
PrintablesModel Magic

Terminator T-800 Series - T-800 Standing in Victory

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
200
Likes
37
Rating
0
P
PrintablesBasil Chernov
18+

The source marked this model as adult content.

Downloads
198
Likes
68
Rating
5
P
PrintablesJuniper

VICTORIAN MANSION ATTIC HO (1/87th) SCALE - ATTIC FLOOR

This is the attic floor of the VICTORIAN MANSION model. Depending on your printer, some components may require some minimum minor trimming. Commercially produced 4'x8' plywood flooring wasn't produced in this country until 1927. So the…

Downloads
197
Likes
58
Rating
0
P
PrintablesMalcolm

Cap Guard for Victorinox Swiss Card Scissors - Ultralight

A simple but effective protect cap for the Victorinox Swiss Card scissors. These Scissors are meant to go into a SwissCard but you can buy the scissors alone (as a ‘replacement’) and they make a really effective Ultralight Backpacking…

Downloads
195
Likes
53
Rating
5

Ornate Victorian Grill/Cover

My sister wanted some ornate victorian style ventillation covers, to cover up some vents in her caravan ceiling. They are usually made from cast iron so not suitable for ceiling mouting, also they are hard to come by in a convenient size.…

Downloads
190
Likes
63
Rating
0
P
PrintablesIndiana Ian

Little Victorian Lamp Post

A little victorian lamp post. For easier printing i used prusa slicer to cut the lamp pole down the center so it can lay flat. The lamp was printed upside down with a little support in the center. I used clear PETG for the lamp glass. The…

Downloads
189
Likes
27
Rating
5
P
PrintablesMIKE

Victory of samothrace

You can print it with the new tree supports.

Downloads
186
Likes
27
Rating
0
P
PrintablesOliverP

6mm Bit Driver for Victorinox 91mm SAK

Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…

Downloads
184
Likes
29
Rating
4.5
P
PrintablesModel Magic

Apocalypse Now - "Smells Like Victory" - 1979

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
183
Likes
41
Rating
2
P
PrintablesSprintyPrinter

Victorinox Fibrox Fillet sheath / protector

Easy to print sheath for Victorinox Fillet knife

Downloads
182
Likes
12
Rating
0
P
PrintablesJuniper

VICTORIAN MANSION ROOF RAFTERS HO (1/87th) SCALE

This is the roof rafters of the VICTORIAN MANSION model. Depending on your printer, some components may require some minimum minor trimming. I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish…

Downloads
177
Likes
47
Rating
0
P
PrintablesPipoJoE

Logo Victorinox

Logo pour inscription sur une plaque

Downloads
176
Likes
5
Rating
0

A victorinox corkscrew blank with a pin

If someone could manage to make this stronger, my pin keeps breaking.

Downloads
175
Likes
34
Rating
0
P
PrintablesJuniper

VICTORIAN MANSION UNDER CONSTRUCTION HO (1/87th) SCALE - FIRST FLOOR

This HO scale (1/87th) VICTORIAN MANSION is to look like it is under construction. The model at this posting is for the first floor only. Depending on your printer, some components may require some minimum minor trimming. Commercially…

Downloads
170
Likes
49
Rating
0
P
PrintablesWolvie

Gym Hexa Dumbbell Victory V Trophy

I created my own model of Gym Hexa Dumbbell Victory V Trophy for everyone, who like gym, dumbbells, victories and trophies :-) This model I created whole by myself. Body of Gym Hexa Dumbbell Victory V Trophy is make to “V” style, to…

Downloads
166
Likes
36
Rating
4
P
PrintablesJuniper

VICTORIAN MANSION SECOND FLOOR HO (1/87th) SCALE - SECOND FLOOR

This is the second floor of the VICTORIAN MANSION model. Depending on your printer, some components may require some minimum minor trimming. Commercially produced 4'x8' plywood flooring wasn't produced in this country until 1927. So the…

Downloads
164
Likes
37
Rating
0
P
PrintablesAdam

Victorian-Style Lion Head Knob M3 Remix

This is a modification of Martin's Victorian-Style Lion Head Knob that allows mounting with a M3 screw and DIN 562 square thin nut. Printing instructions Print the .stl as-oriended, optionally adding a brim if needed. Assembly…

Downloads
162
Likes
58
Rating
5
P
Printables3DCraft

Victorian Miniature House — Classic Dollhouse Style Building

Detailed Victorian-style miniature house with tower, perfect for decor, dioramas, or tabletop scenes.

Downloads
160
Likes
34
Rating
0
P
PrintablesDan

Knife handle scale for Victorinox 111mm models

they are thicker than the orginal scales but you can scale them down if you want.

Downloads
160
Likes
16
Rating
5

The Temple of Hercules Victor

I made it with a layer height of 0.15 mm and 10% of infill, the rest of parameters as a default. Idea obtained by a model in Thingiverse, author: Winslow.

Downloads
160
Likes
19
Rating
0
P
PrintablesSalam Tmera

Victorinox 4mm bit adapter

Works with rambler, jet-setter, mini-champ or any 58mm with Philips. Print on an angle for best results. Takes a 5mm magnet to securely hold the larger bits. Edit: new files will not exactly match pictures

Downloads
153
Likes
23
Rating
0
P
PrintablesStarForge

28mm Victorian Style Street Lamp Post Urban Terrain Element StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
150
Likes
13
Rating
0
P
PrintablesChris

Victorinox SwissCard replacement case Remix

@TomHaynes_30709 created a nearly perfect replacement case for the swisscard. My case had broken so i printed his and everything fit perfectly, but the knife, pen and toothpick were just falling out. So i looked at the old case and there…

Downloads
147
Likes
12
Rating
0
P
Printablesmartin.demling

Victorinox Swisstool belt clip

This belt clip is inspired by this model , although I created the CAD model from scratch. Changes to the original: more space for the belt loop, add a closing mechanism that takes a piece of filament to stay secured. Use a lighter and…

Downloads
144
Likes
25
Rating
5