Search results: vp

Sort order

326 models

P
Printableskilar p

Košík na nečistoty ke kanalizační vpusti okapu

Košík jsem navrhl dle původní součásti kanalizační vpusti, vytištěno je s materiálu PETG, je použitá oranžová barva, aby součástka při čištění nebyla opět vyhozená jako původní černá. Při tištění je potřeba podpěr pod prstencem kterým se…

Downloads
95
Likes
24
Rating
5
P
PrintablesAlexa3D

Moody 2.1 alternativer Halter mit LED Beleuchtung - Virtueller Pinball (VPin)

Moody 2.1 alternativer Halter mit LED Beleuchtung für die Satelliten - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine alternative Halterung für das Moody Soundsystem 2.1 entworfen. Ich wollte die Satelliten von…

Downloads
57
Likes
13
Rating
5
P
PrintablesAlexa3D

Shaker Vibrationsmotor - Virtueller Pinball (VPin)

Shaker Vibrationsmotor für einen Virtuellen Pinball (VPin) Für einen Shaker habe ich eine Halterung konstruiert. Der Halter kann mit 4x Schrauben angeschraubt werden. Es werden hier 2x Halter verwendet, welche eigentlich für Rohre gedacht…

Downloads
41
Likes
11
Rating
0
P
PrintablesAlexa3D

Bohrschablone 140mm PC Luefter fuer DIY Projekt - Virtueller Pinball (VPin)

Bohrschablone 140mm PC Luefter fuer DIY Projekt - Virtueller Pinball (VPin) Für meinen Virtuellen Pinball (Flipper) habe ich 140mm PC Lüfter verbaut. Abmessungen: 140mm x 140mm Da dies ja PC Standards sind, können Sie auch auf andere…

Downloads
35
Likes
8
Rating
0
P
PrintablesAlexa3D

Fraesschablone 45 x 45mm Abstand | Netzschalter / Netzfilter - Virtueller Pinball (VPin)

Fraesschablone Netzschalter / Netzfilter - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich 2 polige Netzschalter bzw. Netzfilter eingebaut. Abmessungen 47mm x 28mm Abstand vom Rand bis Aussparung: ca. 45x45mm Ecke Platte…

Downloads
33
Likes
7
Rating
0
P
PrintablesAlexa3D

Attwood Turbo 4000 Ventilatorhalterung Winkelverstellung - Virtueller Pinball (VPin)

Attwood 4000 Ventilatorhalterung mit Winkelverstellung - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine Halterung für einen Attwood 4000 Ventilator entworfen. Der Ventilator ist eigentlich weiß. Habe diesen zerlegt…

Downloads
31
Likes
8
Rating
0
P
PrintablesRosti

Catan VP counter / Victory Points

This is a rotary victory point (VP) counter for the Catan board game. Starting value 2 (minimum VP you can have) up to 9 plus a 'star' for the winning 10 value. For use by each individual player. Sized to be smaller than a Catan resource…

Downloads
18
Likes
2
Rating
0
P
PrintablesTeitgen 3d

vivitar vpt-360 replacement part

print in abs petg or pla (pla is not recomended) with 10% infill or more and at least 4 perimeters and 6 top and bottom layers. use support only on the overhang above the wrings. the nut will be a tight fit but everything else slides on.

Downloads
16
Likes
0
Rating
0
P
Printablesmrusk

VPforce Rhino DIY Force Feedback (FFB) Flight Stick Base

For realistic Flight Simulation, a Force Feedback Flightstick is mandatory. Unfortunately, there has been a gap in recent years due to several reasons. For some time now, the VPforce Rhino Flightstick is filling the gap. Due to the long…

Downloads
1,176
Likes
161
Rating
5
P
PrintablesEucadiz

MR2 Spyder NavPod

This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…

Downloads
707
Likes
24
Rating
4.25
P
PrintablesNoctua_at

NA-AVP1 anti-vibration pads for Noctua 120/140mm fans

NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1

Downloads
605
Likes
132
Rating
5
P
PrintablesJace1969

Aliens AVP Marine Armour & Weaons V 1-2

Another great Model found over at onekura.com. Cheers Jace

Downloads
531
Likes
56
Rating
4

Vaessen Motorsports VP-2 - DIY Sim Racing Pedals

Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…

Downloads
531
Likes
55
Rating
0
P
PrintablesPláča

Azuro Skimmer Cover – Snap-Fit Screw Cover & Chlorine Floater Guard / Kryt skimmeru Azuro – kryt šroubů s mřížkou proti vplutí plováku

Update 4: Added ddifferent versions of grid spacing Update 3: Modification for skimmer 212x204mm based on request Update 2: Optimized overall dimensions to fit MK3 printer Update 1: Optimized wall thickness to 1,2mm and added 1,6mm…

Downloads
508
Likes
61
Rating
5
P
PrintablesMagicalBeard

Apple Vision Pro (AVP) - Dual Solo Knit Band Clips

This prints fine with supports on FDM. It requires a small amount of flexing of the 3D print to put onto the headset, if you break the clip just print another. This has a front/rear version - the front works better for me, but try both…

Downloads
493
Likes
42
Rating
5
P
Printableslegosrock

Root Board Game VP Marker Stand

Stands for the VP markers for the board game root by leder games. I always found it difficult to manage several vp markers on the same spot, so this allows at least two to fit nicely together.

Downloads
455
Likes
79
Rating
5
P
PrintablesTommy Houghton

E3VP2 Full CAD + Remixes for Ugly Ender 3 V2 Toolhead with Sherpa Mini + Sherpa Micro + Dual 5015 fans + Volcano + ADXL345 Nozzle Mount (Files belong to their respective and linked owners.)

(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…

Downloads
450
Likes
74
Rating
5
P
PrintablesTynernis

Heckler & Koch VP70

Aliens (1986) James Cameron The Heckler & Koch VP70 is the service pistol of the Marines in the movie. This gun is notably seen in the hands of Private Frost (Ricco Ross) just before the Aliens attack. Cpl. Ferro (Colette Hiller) attempts…

Downloads
448
Likes
15
Rating
0
P
PrintablesTakoza

Digimon Vpet Deskstand

a simple lil deskstand for your Digimon. brick-pendulum-DMmini. blank or with a hatching digitama.

Downloads
436
Likes
52
Rating
4.75
P
PrintablesLevi

Tapping block and Spacers for LVP

Use this tool to install click together vinyl plank flooring, specifically Mohawk from Costco. Use a 0.4mm nozzle because of the sharp corners and detail needed. If you use a larger nozzle, the sharp cutbacks will peel when printing, or…

Downloads
431
Likes
21
Rating
5
P
PrintablesZombieTwiglet

John Wick VP9 Compensator

Remxed to fit a UMAREX VP9 airsoft gun.

Downloads
396
Likes
67
Rating
4.5
P
PrintablesEvocato

Virpil VPC WarBRD Base Desk Mount

A desk mount for the VPC WarBRD Base from Virpil. This mount turns the joystick base 90° from its normal mounting position, so the base isn't protruding from the desk so much. You should be able to mount it on a desk with a thickness from…

Downloads
346
Likes
67
Rating
5
P
PrintablesBrooklyn Tony

VP-S Kit for the Dart Zone Venom Pro

BLASTER OVERVIEW The VP-S (or the "Venom Pro, Streamlined") kit for the Dart Zone Venom Pro is a kit that evens out the proportions of the blaster while also extending the battery compartment and allowing the use of Acro P2 mount pistol…

Downloads
332
Likes
94
Rating
5
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Car Rack

This model is designed to comfortably transport your favorite onewheeled toy in the car without it banging in all directions inside your car. The part has an original design and was designed directly on the CAD model provided by Tony from…

Downloads
319
Likes
23
Rating
0
P
PrintablesWindham Graves

LCVP Higgens boat easy print

Come support these models over on Patreon Buy my time, Not my models. Easy to print (*) LCVP Higgens boat, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The door can be glued…

Downloads
302
Likes
20
Rating
3
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Vertical Stand

This part have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The design features a specific seat for the front bumper and therefore ensures the correct positioning and stability of the…

Downloads
267
Likes
17
Rating
5
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Mini Fender +12 mm + Mudguard + Delete Fenders

These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The intent of this design is to solve 2 problems of the original design Tire rubbing (appare Compatibility of the Drop Top…

Downloads
266
Likes
24
Rating
5
P
Printablesdoragasu

Stackable Gridfinity Holder for Rigol PVP2150 Oscilloscope Probe

I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.

Downloads
234
Likes
44
Rating
4.88
P
PrintablesAlexander L

Tank platform TVP-1 (Tracked vehicle platform v1)

Tank platform TVP-1 (Tracked vehicle platform v1) Description Greetings to all robotics enthusiasts and 3D printing aficionados! I am excited to introduce my tracked platform model, designed to serve as a versatile base for various…

Downloads
227
Likes
32
Rating
5
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Charger Plug Cover

This design helps keep dust from getting inside the Floatwheel's charger socket. It's designed to fit and seal the charging port up to the mouth of the socket Have fun! RECOMMENDED MATERIAL: TPU 90A Print Parameters: NOZZLE 0,4 LAYER 0,2…

Downloads
219
Likes
13
Rating
5
P
PrintablesEvilProphet

ESMAG - Magazines Holder - HK SFP9 (VP9)

Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…

Downloads
209
Likes
14
Rating
0
P
Printablespasric

Pimax Dream Air Splitter Box Clip AVP Dual Knit Band

Pimax Dream Air Splitter Box Clip AVP Dual Knit Band

Downloads
202
Likes
10
Rating
0
P
PrintablesMakeIt.STL

Predator Shuriken (AVP-Inspired) – Functional Prop Replica

🌀 Predator Shuriken (AVP-Inspired) – Functional Prop Replica A fully 3D-printable fan-made Predator shuriken, loosely inspired by the Alien vs. Predator movie series. Designed for both display and articulated movement, this prop includes…

Downloads
197
Likes
30
Rating
0

VP3D Maker Fidget Coin

Print in place maker fidget coin. The inner circle and outer ring move independently. Can be printed in a single color, but a couple filament swaps really show off the detail. Designed for Prusa's December Design Competition. This was my…

Downloads
191
Likes
14
Rating
5
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Power Button plug cover

This design helps keep dust from getting inside the Floatwheel's Power Button socket. The design is perfectly integrated inside the rails and leaves just under 1 mm gap between cover and button, it should also be compatible with the…

Downloads
184
Likes
11
Rating
5
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro 3D Printable Footpads (Original & Wide)

These parts are designed directly on the CAD model provided by Tony from Floatwheel. These are 3D printable versions of the footpads for anyone who wants to replicate them either in the original version or in the wide version . Obviously,…

Downloads
184
Likes
12
Rating
4
P
PrintablesMarlow

LCVP (landing craft, vehicle, personnel) or Higgins Boat.

Nothing terribly difficult about assembly. Need to print two .30 Cal MGs.

Downloads
182
Likes
13
Rating
0
P
PrintablesMattInOregon

Edge Spacers for Flooring Installation (LVP, etc)

I didn't like any of the edge spacers that I found for installing my new Luxury Vinyl Plank flooring, so I designed my own. I included a large flat edge for the wall side to help be stable against old imperfect drywall, and a tail at the…

Downloads
177
Likes
23
Rating
0
P
PrintablesMaschineFuhrer
Downloads
170
Likes
18
Rating
0
P
PrintablesHackjaz

Dual Spool Cord Wrap - Hackjaz x KVP Remix

Just as Andrew Roth's initial Dual Spool Cord Wrap design was spool-specific (Prusament), this remix was made to fit the empty spools of my daily-driver filament (KVP/MakeShaper). This remix will also work well with empty spools from…

Downloads
159
Likes
36
Rating
4.75
P
PrintablesCats

Dovpo Dual Topside Case

This case will prevent the batter door from popping open. Fits very snug at 100% which is why there is a hole in the bottom to help push it back out. I suggest using a tougher material like PETG or PLA+. 1.11.23 - Updated to be 2mm…

Downloads
158
Likes
12
Rating
4
P
PrintablesCosmin702

Replacement pen for Promethean ActivPanel boards

Make Your Promethean Board Shine Again: Printable Replacement Pen with ALL Original Features! Tired of broken or lost Promethean board pens? Say goodbye to frustration and hello to smooth, precise interaction with your interactive…

Downloads
158
Likes
7
Rating
5

Hogwarts Houses Bookmarks Harry Potter RevPrinting Free STL 3MF

🪄 Have fun with my Harry Potter Bookmarks in Reverse print! They are all maximum 4 colors. Reverse printing = main side facing the plate for better quality Commercial License ✨ Do you want to sell prints of this model? You can purchase…

Downloads
158
Likes
25
Rating
0

Harry Potter Bookmarks Hogwarts Houses RevPrinting STL + 3MF

🪄 Have fun with my Harry Potter Bookmarks in Reverse print! They are all maximum 4 colors. Reverse printing = main side facing the plate for better quality Commercial License ✨ Do you want to sell prints of this model? You can purchase…

Downloads
155
Likes
40
Rating
5
P
PrintablesMeuon

HK VP9 Rail Holster

Holster for an HK VP9 using the rail, which enables easy holstering (and removal) when large attachments are on the rail. The mounting holes are 32mm apart, and fit common Safariland and other belt attachments. There are several hole…

Downloads
152
Likes
14
Rating
0
P
PrintablesLord Skippy

Virpil VPC Desk Mount linear rail adapter for MongoosT / WarBRD / Stream Deck

Mount your Virpil Throttle and Stick to linear rails so you can slide them along your desk. This allows you to move your HOTAS aside when you use the computer for other work. When flying your aircraft or spaceship, a spring-loaded locking…

Downloads
148
Likes
80
Rating
0
P
PrintablesprintsNstuff

VP fuel can replacement cap

Be sure tp print the cap and screw with ASA or a fuel resistant filament. Used overture TPU for the lanyard. The top screw locks the lanyard in place. Just loop the wide opening of the lanyard over the hose coming off the can. .4 nozzle…

Downloads
148
Likes
5
Rating
0
P
PrintablesCwesystems

Noctua Redux fan anti vibration pad NA-SAVP1

Anti vibration pads for Noctua Redux fans (140 and 120mm) Print in some flexible material, like TPU. I printed with Eryone standard TPU.

Downloads
145
Likes
33
Rating
5
P
PrintablesPorter
Downloads
144
Likes
6
Rating
0
P
PrintablesMadMax

Egg by kosteklvp (Remix)

Great, simple model by kosteklvp. I wanted to be able to print it without supports so I cut 2mm off the bottom so it would sit flat on the plate.

Downloads
137
Likes
11
Rating
5
P
PrintablesFenix

Silniční válec VP 200 velikost HO 1:87

Model je určený jako kulisa na kolejiště nebo dioráma, je to moje prvotina. Vše se lepí jako celek není pohyblivý.

Downloads
135
Likes
16
Rating
0
P
PrintablesRC

VP Racing Flexible Hose Bender

A hose bender designed to hold a VP Racing fuel jug hose. It could also work for many other applications where a bend is needed. I have included a 45° and 62.5° version that measures 115mm in length. Supports needed if printing vertical.…

Downloads
133
Likes
17
Rating
5
P
PrintablesImperator3d

MVP Trophy Padel

MVP Trophy Padel

Downloads
130
Likes
3
Rating
0

Pyrex 8500 VPC Storage Lid

Replacement lid for Pyrex glass oval bowl with optional vent lid. Material: TPU Layer: 0.2 Sliced with Cura 5.5 exclusive slicing tolerance @ 101%Scale

Downloads
117
Likes
0
Rating
0
P
PrintablesDokrull

Airsoft VP9 Pistol Compansator

It is basicly the Ace Arms VP9 compansator, but it will fit on any airsoft pistol with a threaded muzzle. Airsoft only!! ;) There are two versions one with a 14mm CCW thread and one without a thread. For mounting you will need two M3 grub…

Downloads
116
Likes
30
Rating
0
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Rimsaver

This is a redesign of the 6'' inch Rimsaver made on the Floatwheel Original CAD provided by Tony. Some guys have already printed this type of design successfully. I don't guarantee that it will be successful on the first try due to the…

Downloads
116
Likes
13
Rating
0
P
Printablescreativemario

Promethean ActivPanel AP9 Crayon - Compatible Replacement Pen

“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…

Downloads
113
Likes
8
Rating
5
P
Printablescreativemario

Promethean ActivPanel 9 Pen Clip (for Lanyards)

“Can I have a new pen for my Promethean board, I've lost my old one”. If only teachers would look after the lovely equipment IT buy them… This clip is designed to attach a Promethean Pen to a standard lanyard clip, reducing the number of…

Downloads
105
Likes
16
Rating
4.5
P
PrintablesMandicReally

Noctua NA-AVP1 Vibration Pads - Printable Version!

This is a remix of Noctua’s NA-AVP1 fan vibration isolation pad, modified for successful 3D printing. The original design is intended for injection molding and does not print well as-is. This version has been adjusted to print cleanly on…

Downloads
102
Likes
36
Rating
4.5
P
PrintablesMr_Mxlptlk

Stativprisma, Kameraprisma, Camera Mount

I have just finished a quick-change prism for cameras with 1/4 inch thread and for use with a tripod and I am happy to make it available to the community. The set consists of four parts: a1: camera part a2: threaded screw 6,35 mm (1/4")…

Downloads
102
Likes
13
Rating
0
P
PrintablesPorter

MVP Soccer Trophie

Better with small infill

Downloads
102
Likes
4
Rating
0
P
PrintablesKapii

Root Markers Victory Point VP token

Root Markers Victory Point VP token

Downloads
99
Likes
7
Rating
0
P
PrintablesOpen-Laboratory

Laboratory Stand - Base Plate / Laborstativ - Stativplatte 8 mm

Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…

Downloads
98
Likes
17
Rating
0
P
PrintablesPorter

MVP Football Trophie

Change infill to about 5%

Downloads
97
Likes
4
Rating
0
P
Printableslinkaudiodesign

500 API VPR 51X Stereo and Mono Rack Case

These are Case Parts to make a 500 Racks in Stereo or Mono. It's parts of a (DIY) Audio System with 500 modules. The Modules that can used with the 3d files are: EXT VPR EXT 51X STEREO VPR STEREO 51X Additional PCBs and needed parts and…

Downloads
91
Likes
7
Rating
0
P
Printableslegosrock

TI4 VP Tracker

A VP Tracker for TI4. a version for both 6player and 8 player games is provided. solidworks model as well for those that want to make edits. SHould have enough clearance for the tokens as is, but I'd suggest printing just a test section…

Downloads
90
Likes
7
Rating
5
P
PrintablesTheMakerRob

Proper Apple Vision Pro (AVP) to BoboVR M2/3 converter

Properly converting the BoboVR M2/M3 to the Apple Vision Pro. This print will allow you to convert a BoboVR M2 or M3 halo style head strap to fit the Apple Vision Pro. Unlike other conversion efforts that adapt the existing Meta Quest…

Downloads
90
Likes
15
Rating
5
P
PrintablesUrsaMajor303

Trijicon Credeo 1-8 LVPO Anti Reflection Device

I used a kill flash design found here: https://www.thingiverse.com/thing:4875497/apps I created a ring that allows the user to snap it over the Credo 1-8 LVPO. My ring sets the grid back from the face a few millimeters to help protect the…

Downloads
88
Likes
12
Rating
0
P
PrintablesGradyMakes

MVP Medal

MVP Medal with keychain hole on top.

Downloads
88
Likes
3
Rating
5
P
PrintablesMagnumDanger

Race for the Galaxy VP Tokens - Multicolor

I wanted some tokens to replace the cardboard ones included in all of these games. These are designed to print with a printer that can do multiple colors. This is not a color change at layer swap print. You will need the following of each…

Downloads
87
Likes
16
Rating
0
P
Printablesdubi01

Vivitar VPT-360 Quick Release plate for the tripod

I found a nice Vivitar tripod at Goodwill, missing the camera quick release mount. I found a good file for a replacement here on Printables and tried it. It works, but I thought it might be improved and here is what I came up with. The…

Downloads
86
Likes
4
Rating
0
P
PrintablesMino

just a Remix to fit the Rigol PVP3150 Probe

just a Remix to fit the Rigol PVP3150 Probe

Downloads
85
Likes
10
Rating
3
P
PrintablesMFTuning
18+

The source marked this model as adult content.

Downloads
85
Likes
12
Rating
0
P
PrintablesPene

Virpil VPC WarBRD-D Base Desk Mount

Please see original model. There you can find the print instructions, and a list of the screws/nuts needed. Since this is the WarBRD-D, there is no baseplate in the printfiles.

Downloads
85
Likes
19
Rating
0
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Split Slim Top Fender (5°-12mm preload)

INTRODUCTION These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel . This top fender was created for all those who want to print the fender at home but don't have a large print…

Downloads
85
Likes
7
Rating
0
P
PrintablesHenning

Holder for 4-Port RAVPower USB-Charger

A simple holder for the 4-port RAVPower USB-Charger. Two holes for screws to mount it to your wall or your desk. Print instructions No supports needed.

Downloads
82
Likes
8
Rating
5
P
PrintablesNick Reed

MVP Disc Station Bookend

This is a basic bookend for an MVP Disc Station™ rack. It should slide nicely, and hold well enough, but how difficult it is to snap onto the rails may vary based on your printer tolerances and filament. Demo: https://vimeo.com/900940959

Downloads
82
Likes
5
Rating
0
P
PrintablesTwistedRisers

VP-Racing can knob.

Knob for the VP-Racing fuel can. If you do not have a 3d printer can i suggest you contact Kyle Davies at the links below. He can print the parts for you with a percentage of the cost going to UK Alzheimers charity. Website…

Downloads
81
Likes
10
Rating
0
P
PrintablesWindham Graves

LCVP Higgens air cushion hovercraft easy print

Come support these models over on Patreon Buy my time, Not my models. Easy to print LCVP Higgens air cushion hovercraft, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The door…

Downloads
79
Likes
4
Rating
0
P
PrintablesJens Zier

Samsung Galaxy XR AVP Adapter

Since nobody was willing to make one, I ended up doing it myself. This comes in to variants: An adapter to replace the the original strap with a an AVP Dual Knit Band and an adapter to reattach the original strap (which of course has to…

Downloads
77
Likes
8
Rating
5
P
PrintablesVertigo

Short joystick extension for VPforce Rhino or thrustmaster compatible sticks

This extension is a little under 50mm tall, bring the stick forward by 33mm and tilts it 10 degree forward. There is a version of the extension with and one without access hole that may help if you have a thick/long connector. Also…

Downloads
76
Likes
9
Rating
0
P
PrintablesBrian Evans

Warcry Panel - English VP

Printed using Bambu AMS or you could do layer color changes

Downloads
76
Likes
7
Rating
0
P
PrintablesMakeseum

LED Downlight Adapter to GU10 (Ultralux LLVP1242)

I have a lot of Ultralux LLVP1242 downlights at home. Every month I have to replace at least one or two of them, and it's gotten quite expensive (at 12-15 euro each), so I decided to convert them to regular GU10 LED bulbs. This model…

Downloads
76
Likes
11
Rating
0
P
PrintablesCeleste

Sturdy 10 inch rack mount for the TL-ER605 consumer VPN router

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…

Downloads
76
Likes
14
Rating
0
P
PrintablesTooManySecrets

BLVPstruder (Bowden large volume paste extruder)

///////Updates///////////////////// 10.02.2023 Added step files for those wishing to modify the design. 02.03.2022 Tested extrusion of silicone. Works like a charm. Testing clay next. https://www.youtube.com/shorts/Jm4B6kjWuGM 23.02.2022…

Downloads
74
Likes
21
Rating
0
P
Printablesquantenquark

VPM-Lampenhalter_V3

Das vorliegende 3D-Modell wurde speziell für die optimierte Montage der Beleuchtungseinheiten des VPM-Moduls NRW ( Verpflegungsmodule NRW ) entwickelt. Es wurde auf Grundlage der Anforderungen der Einsatzkräfte des Deutschen Roten Kreuzes…

Downloads
74
Likes
4
Rating
0
P
PrintablesEm

Digimon Vpet Stand for Ikea Skadis

a simple lil Skadis bracket for your digimon. Added the bracket for the pendulum style vpet.

Downloads
73
Likes
7
Rating
0
P
PrintablesaKra

MLX90614 IR sensor for VPD measurements

Taking use of the MLX90614 (DCC/BCC) sensor (GY-906) I can measure the actual leaf temperature for getting "LeafVPD" measurement with Mycodo. You need to solder the wires onto the board (there is not enough height for Dupont pins!).…

Downloads
72
Likes
4
Rating
0
P
PrintablesUrsaMajor303

Shockcord Scope Caps for Trijicon Credo 1-8 LVPO

I sized the caps and ring to fit the Credo 1-8. This kit includes the all three models in one STL fit on a build plate for a Creality Ender3 V3 SE. I did have to run an 1/8" drill bit through the holes for the shock cord to clean them up…

Downloads
71
Likes
6
Rating
0
P
PrintablesEvocato

Virpil VPC WarBRD Base Axis Damper

A sock-like X and Y axis damper for the VPC WarBRD base. When you reach the end of the axis you won't hit metal with metal. The parts are really thin (0.5mm), so they don't limit the deflection angle much. I printed them in TPU filament…

Downloads
70
Likes
12
Rating
5
P
PrintablesJens

RavPower USB-C wallMount

This is a basic mount for the RavPower USB C Edition

Downloads
67
Likes
3
Rating
5
P
PrintablesCrosswindJones

Virpil - VPC Universal Angled Panel Mount

Printed with PLA+, 4 perimeters, 40% infill. Honestly, its rock solid even on my motion rig. Way better result than I expected. I included a step file in case you want to cut a steel version.

Downloads
66
Likes
5
Rating
5
P
PrintablesLehnen

Stativplatte

Stativplatte für verschiedene Stative hält bei mir auf Manfrotto und kenfaith K&F von Thingiverse http://www.thingiverse.com/thing:2762083 alles in PETG 0,35 Schicht mit 0,6 Düse

Downloads
66
Likes
9
Rating
0
P
PrintablesSQ9MDD

TNC VP-DIGI modem housing

TNC modem housing. The design is described here: https://sq8l.pzk.pl/index.php/vp-digi-tani-i-funkcjonalny-sterownik-digipeatera-aprs-wraz-z-modemem-kiss/

Downloads
66
Likes
8
Rating
0
P
PrintablesNick Reed

MVP Disc Station Compact Bookend

This is a more compact bookend for the MVP Disc Station™ with space up top or bottom for labels. It should slide nicely, and hold well, but how difficult it is to snap onto the rails may vary based on your printer tolerances and filament.

Downloads
66
Likes
4
Rating
0
P
PrintablesJoe J.

VP Racing 5 gallon Jug Cap Tool

2 models, one has a hole in it for if you want to run some rope or wire through it to attach it to the jug itself. the other one doesn't. unless your using a specific filament that can withstand the chemical properties of gas, don't let…

Downloads
64
Likes
5
Rating
5
P
PrintablesRedeye

dust seal sd card cover for Ravpower Filehub

A cover to seal your sd card slot on your Ravpower Filehub to avoid dust and moist going in there. Print with TPU or TPE or other flex filaments. UPDATE: The (1) file is for the newest Filehub generation. Category: Camera

Downloads
60
Likes
4
Rating
0
P
PrintablesHYPERFORMA

HYPERFORMA_Floatwheel ADV-ADVPro Mini Fender +12 mm + Delete Fenders (MUDGUARD included)

These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. Models included: HYPERFORMA_Floatwheel ADV-ADVPro Drop Top Fender Base (MiniFender) +12mm_STANDALONE HYPERFORMA_Floatwheel…

Downloads
58
Likes
1
Rating
0
P
PrintablesFumanchu

MagSafe iPhone and Apple Watch Charging Stand - RAVPower

Printed on Creality Ender 5 Pro Elegoo PLA Pro Black Filament Bridging angle set to 45 Deg No supports necessary I turned ironing on to have a nice surface for the tray

Downloads
57
Likes
9
Rating
0
P
PrintablesFreddy

Vent CAP VP VENT VP3045

This is the vent cap for fuel tanks from VP. Filament: PETG Extrudr 30% filling

Downloads
56
Likes
6
Rating
0