HYPERFORMA_Floatwheel ADV-ADVPro Car Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Car Rack for Floatwheel ADV / ADV Pro
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 318
- Makes
- 2
- Views
- 1,391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed to comfortably transport your favorite onewheeled toy in the car without it banging in all directions inside your car.
The part has an original design and was designed directly on the CAD model provided by Tony from Floatwheel. It's also compatible with the PRO version and also with the lifesavers/rimsavers mounted on the tyre. Also compatible with the original Drop Top Fender and the Handle mounted.
HEIGHT ADJUSTMENTS COMPATIBILITY:
HIGH: rimsavers, original drop top fender
MIDDLE: original drop top fender, handle, rimsavers
LOW: rimsavers, handle, drop top fender (if mounted on “HYPERFORMA_Floatwheel ADV-ADVPro Mini Fender +12 mm”)
The recommended material is PLA, obviously nozzle sizes equal to or greater than 0.6 mm are recommended
I don't rule out that TPU could be an interesting solution, although certainly more expensive.
I leave the choice up to you, have fun and share your makes!
RECOMMENDED MATERIAL: PLA / TPU?
| Printing Parameters: PLA | |
| NOZZLE | ≥0,6 mm |
| LAYER | 0,3 mm |
| WALL | 2 |
| INFILL PERCENTAGE | 15 |
| INFILL TYPE | Trinagles |
| TOP/BOTTOM THICKNESS | 4 LAYERS |
| SPEED | 60 mm/s |
No supports needed!
UPDATE 6/12/2023: added a squared version that fit in a 230x230 3d printer.