Walkie Talkie
Spielzeug für die Kids
- Downloads
- 253
- Likes
- 17
- Rating
- 5
96 models
Hi everyone, I designed a simple walkie-talkie which can be resizable and support-free . You can see that the model in the cover photo is smaller than the original size. I printed it by adjusting the size scale by 60%. Have fun!
I measured and scaled up the lego Radio 10x. You might need to adjust the size of the size of the plugs as needed.
Handy holder for a portable radio. Suitable for older cars where you are not afraid to screw.
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
After recently getting about 17 rolls of PLA for $20, I gave my kids the opportunity to decide the next thing for me to print for each of them, whether I design it or it's off of the printables site. My 2 youngest (Age 4 and 5) requested…
Originally designed for the 2022 LM Show Christmas Community Print Drive! SPACE is our theme this year! Print and help us ship 3D printed toys to children and families in-need, all over the world!…
Molle panel insert uses M3 heated inserts
We are using the Baofeng BF-R5 portable two-way radio as communication in our Scout group Träkvista Sjöscoutkår , and I made a wall-hanging storage/charging station that holds 12 radios and two multi-output USB chargers. That meant that I…
A simple HT / Walkie Talkie mount using the QUICK-CLIP system. Provided are 2 versions, a straight mount, and an angled 22.5 degree mount. I designed the angled mount for use on backpack straps so that the radio will properly sit straight…
I created this to hold a GMRS radio to a typical cell phone holder. My issue that I needed to resolve was when I go 4 wheeling in my Jeep, my walkie talkie would get thrown all though out the cabin, even when it was in a cup holder. So I…
Printed using Black MG95 ABS Layers 0.2mm Walls 2 Top/Bottom 5 Infill 15% Gyroid Bed Adhesion Brim (3mm or 5mm) Supports Yes (Touching Bed only) PS: You need to add a “support blocker block”. Resize and move it to cover everything above…
The original works great! It just had a little too much play for the walkies I use so I simply modified the design to fit my needs.
Fits GMR855-2/GMR855-2CK/GMR1048-2CK UNIDEN Walkie-Talkie Print instructions Print with flexible filament.
this is a walkie talkie radio holder for Baofeng
No supports needed, Works on almost all printers and PLA is recommended
Rick and Morty | Die hard | Summer's walkie Talkie Waaaaah! I got your walkie-talkie. For printing, you could cut a flat bottom on your own. Or download my flat bottom one. Have fun! Follow my IG ▶ https://www.instagram.com/ningworks/
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
🇫🇷 Description en français Ce support est conçu pour accueillir toutes les radios portatives ou CB munies d’un clip ceinture , comme les modèles Baofeng UV-5R , Yaesu , Midland , ou équivalents. Il se place directement dans le…
Small clip to hang walkie talkie out of the small cubby hole to the right of the radio in a 2013 f150. UNTESTED Category: Parts
Support pour talkie walkie avec gravure (fichier stl)
I created this wall mount for the Motorola T600 set that I picked up at Costco. This version includes screw holes that fit an M4 screw or similar and a separate model that is designed for Command strips (small).
we use a lot of motorola walkie at work, in rough terrain and with gloves on. so when the knobs break off it's a hassle to get new ones. If we even get new ones. So with this you can fix it on your own. There are 4 knobs in this make. 1…
Model Holder Walkie.stl je praktický držák na vysílačku navržený pro snadnou montáž na stěnu. Na základě analýzy geometrie a vašich požadavků jsem připravil kompletní popis pro vaši prezentaci na portálu Printables. Tento model je navržen…
Added a 3rd spot for another Motorola Talkabout Walkie Talkie. Print at 0.20mm layer height, with 2 walls, and at least 10% infill. If you're using 3D printed belt clips, you may need to increase the print size to 103% so they fit nicely.
Remixed from XtofH's walkie-talkie holder. Edited to strengthen and increase holder size to accept UV5R and other radios Original model: https://www.printables.com/model/156532-land-rover-defender-td4-radio-holder Printed mine in black…
Hi there! Own a GR86 or Subaru BRZ and have come to the realization, like so many of us, that there's next to nowhere to throw your trusty Baofeng or TIDRadio walkie-talkie on your car club events? Heading to Tail of the Dragon with a…
I printed this with PETG to help make the part that clips into the walkie more flexible but PLA should work fine too
This cradle can hold four of the RT19 walkie talkies upright and securely. The base of the cradle matches the bottom shape of the 2 way radios; to hold it in-place. Please note that because of its unique shape at the base, the dock will…
I purchased this 6 pack of generic walkie talkies on Amazon for about $50. I was looking for cheap, rechargeable, and usb-c port. Pretty great deal, and they've worked well for our family. I wanted an easy way to store them so they would…
Contains both a single and double holder with rooms for the clips. Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Adafruit Learn Guide: https://learn.adafruit.com/esp-now-walkie-talkies A Feather ESP32-S3 Reverse TFT runs Arduino code that uses the ESP-NOW wireless protocol to send and receive I2S audio packets, up to 10 seconds each. The w.FL…
I got my son a pair of walkie talkies last week. He wanted a cradle so they don't wander everywhere. We sat down and browsed for inspiration. He found nothing that met his taste. He was clear the devices should be enclosed to a certain…
Hello this is a Black Belt Clip for Retevis RT68 Walkie Talkie. this is my first model i upload here i will upload more. Best use for ABS or PETG or PLA i have use it but it will not be good for hot area i live in Canada so it sure be…
I needed some identification tags for the walkie talkies we use at work. Looks much nicer than a piece of tape or a label maker label that eventually wears off. Also make them more customizable in colors or numbers and letters. 100% scale…
I created this for my kids walkie-talkie set but the box is 57x41x31 so it would work for anything else that size. I also added a file without the cutouts for regular storage cups. The tabs on the back are sized for medium size Command…
Use this model in cosplays and as a prop!
BASE Walkie talkie Baofeng UV-9R para la pared. To the wall. Print Settings Printer: Rafts: No Supports: No Resolution: 0.20-0.28 Infill: 60-70 % Filament: SMART MATERIALS ASA (o ABS) Notes: IMPRIMIDO EN ASA RESISTENTE AL SOL Y A LA SAL.…
attaching your tangent to a bulletproof vest
This adapter converts Walmart's walkie-talkie to a 25mm x 25mm square. I designed a separate adapter that takes the same square for use on my motorcycle, so I could mount this popular, cheap, and hardy FRS-band walkie talkie to my…
Cradle for President Randy II FCC CD Radio Walkie-Talkie (Single & Double Versions) This is a cradle for the President Randy II FCC CD radio walkie-talkie . The set includes two STL files: Single cradle version – holds one radio Double…
Diamond antenna SRH805S cap replacement. README Please note that it is designed for a narrow fit. Please heat the antenna base slightly with a heat gun or smth.
Hi, This is a wall or surface mount for screwing in the Retevis RT24 charging station. The chargers snap securely into place and can easily be removed again (see video for how it works). Compatible Walkie Talkies This mount fits the…
Here are some greeble parts for the walkie talkie as seen in Skeleton Crew. Also included is a PDF for the lower label. I designed the antenna-related parts to be used with a generic magnetic pick-up tool as replacement antenna - other…
Walkie/Radio system for dye i4 with built-in PTT System is testede and Works very well, very good sound both as sender and receiver, Boom and wiring diagram is attached to this thread, plus some pictures of how it comes together BOM Pin…
Ready to print with the original antenna (included here unchanged) and after cleaning off raft and tree supports from handset, superglued the antenna in place. All from the OP's hard work to recreate part 3962a used in the classic space…
This is a tiny, 2-piece adapter that is meant to pop into the middle of your Loop Earplugs and allow you to insert a walkie-talkie/radio earpiece. Most earpieces on Amazon come with an isolating tip as an option for dampening noise in…
I was annoyed with my walkie talkies just sitting loose on my desk so I made a holder which stores the four walkie talkies and their cables. There is also a hole next to each one so they can be charged while in the holder
This is a Walkie-Talkie dummy for any imaginable purpose. It features a removable back cover for storing spare batteries for real Walkie-Talkies(or for anything else). The cover does not fit perfectly.
This modification allows you to mount up to 5 batteries for Motorola radios on the HSW
3D printed enclosure based on this project https://www.instructables.com/Arduino-Walkie-Talkie/ 基于此项目的 3D 打印外壳 https://www.instructables.com/Arduino-Walkie-Talkie/ Print Settings Printer: I3 Rafts: Doesn't Matter Supports: Doesn't Matter…
Because my last mic broke I made a new housing. If your printer closes the microphone holes, just heat up a needle and open them up again. After that just glue the two parts together.…
Radfunk 3000" Walkie Talkie holder for bicycle
HSW Compatible mounting bracket for the Motorola T600 Walkie Talkies.
Holder for Walkie Talkie T-388
(tartó,držiteľ,halter)
A small clip to mount a walkie talkie in the dashboard cubby hole of a 2015 f150
Screws M4 ■ Nozzle ➔ 0.4 ■ Material ➔ PLA ■ Infill ➔ 15-20% ■ Supports ➔ NO
Walkie-talkie, that does nothing but you can press buttons to light them up, or turn them off. Ideal toy for kids :) BOM 4x self-locking push buttons 5V (https://www.aliexpress.com/item/32921319398.html) 1x 2AA battery holder…
I created this after the original broke (see 2nd photo). No supports are needed, as i added them in the design (to help with the bridging). They easily break away. The grooves on either side might need a little filing down, depending on…
Es un diseño hecho en base a la forma del modelo de walkie-talkies WT TREK pero se puede adaptar a cualquier modelo de walkie-talkies cambiando ligeramente las medidas en el programa de impresión es imprescindible este ultimo paso para…
MOICO Walkie Talkie D-Ring Carabiner Clip, inspired by some similar designs I saw on here such as @vidision's here: https://makerworld.com/en/models/717423-d-ring-clip-for-midland-radio?from=search I printed theirs and found that my…
A two-piece replacement for a cover of an antenna from a Hoffer walkie-talkie. Print from PLA, larger piece can be printed with 0.3 mm layer height and upside down (without supports). Smaller piece can be a bit tricky so I recommend using…
Description: This is a free 3D-printable holder specifically designed to fit the Motorola Talkabout T210 Rechargeable 2-Way Radio (Black with Red, 2-Pack) . The holder was modeled to securely hold your walkie-talkie in a convenient,…
Ripped from the game Lethal Company . Original design credit goes to ZeekerssRBLX/Zeekerss, the (at time of writing) sole developer of Lethal Company . The .dds files are textures, the .png equivalents of which are the final two thumbnail…
This modification allows you to mount up to 4 Motorola radios on the HSW
Custom 3D printable enclosure specially designed for ESP32 DIY Walkie-Talkie and communicator projects. This compact and functional case features dedicated cutouts for components, buttons, and top acce
Wykorzystuje ten wsuwany uchwyt w kieszeni na pulpicie w Peugeot 307
Dual wall mount for my BTech radios. I made this specifically for BTech GMRS Radios, but I'm sure it would work for many types.
I designed Kids walkie talkies stand. You can choose version with or without Albi pencil (1.generation). It all walkie talkies with dimension up to 50mm x 30mm should fit inside. You can also use bigger, but then you have to resized in…
Simple replacement for the antenna cover. 3MF, STL, STEP and SW-2025 files available.
Case insert for a Midland TX10 including 12 battery's
This modification allows you to mount a charger for Motorola radios on the HSW
Simple mount for pair of walkies, that matches honeycomb wall.
The soft “rubber duck” antenna shells on my marine Uniden walkie talkies crapped the bed (too old, broke apart). This shell replaces them. I used Ninjaflex, but any TPU can do the job.
Video of it in action https://docs.google.com/presentation/d/1tPr8-Wlly2cKCD7v7oQrFnrQZWnOcuxOu6znksW3VAs/edit?usp=sharing Also, sadly, you can only do one letter at a time. I tried to do multiple, but the CPU went from cold to blistering…
Custom organizer designed specifically for the Cobra RX-100 walkie talkie 4-pack. This dock holds all four radios upright in individual bays so the kids can just chuck them in there when they are done and they dont get lost. The…
I wanted to help the boys to store their walkie-talkis on their LEGO-HSW. The HSW Insert came from this model's STEP file: inserts-combined.step
Handles for the Mellow_Labs Working Giant LEGO Walkie Talkie Vidoe: https://youtu.be/cwBZX9UchRI
hook for walkie-talkie buki TW01
3D printing settings Recommended Printer Settings PLA or PTEG 15%-30% infill
Walkie Talkie Clip is a drop-in snap-fit replacement for a walkie-talkie's factory belt clip. It has reinforced stress fillets and spring retention to grip waistbands and lanyards securely for all-day use. Print notes: Material: PETG,…
I created this wall mount for the Motorola T600 set that I picked up at Costco. This version includes screw holes that fit an M4 screw or similar and a separate model that is designed for Command strips (small).
Video of it in action https://docs.google.com/presentation/d/1tPr8-Wlly2cKCD7v7oQrFnrQZWnOcuxOu6znksW3VAs/edit?usp=sharing Also, sadly, you can only do one letter at a time. I tried to do multiple, but the CPU went from cold to blistering…
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
we use a lot of motorola walkie at work, in rough terrain and with gloves on. so when the knobs break off it's a hassle to get new ones. If we even get new ones. So with this you can fix it on your own. There are 4 knobs in this make. 1…
Custom organizer designed specifically for the Cobra RX-100 walkie talkie 4-pack. This dock holds all four radios upright in individual bays so the kids can just chuck them in there when they are done and they dont get lost. The…
This is a Walkie-Talkie dummy for any imaginable purpose. It features a removable back cover for storing spare batteries for real Walkie-Talkies(or for anything else). The cover does not fit perfectly.
Model Holder Walkie.stl je praktický držák na vysílačku navržený pro snadnou montáž na stěnu. Na základě analýzy geometrie a vašich požadavků jsem připravil kompletní popis pro vaši prezentaci na portálu Printables. Tento model je navržen…
Adafruit Learn Guide: https://learn.adafruit.com/esp-now-walkie-talkies A Feather ESP32-S3 Reverse TFT runs Arduino code that uses the ESP-NOW wireless protocol to send and receive I2S audio packets, up to 10 seconds each. The w.FL…
Ready to print with the original antenna (included here unchanged) and after cleaning off raft and tree supports from handset, superglued the antenna in place. All from the OP's hard work to recreate part 3962a used in the classic space…
This is a Walkie-Talkie dummy for any imaginable purpose. It features a removable back cover for storing spare batteries for real Walkie-Talkies(or for anything else). The cover does not fit perfectly.
Very basic Evolveo freetalk w2 (walkie talkie) holder. Very, very, VERY, VERY BASIC You can use it like mini box or something like that :) I hope you print this. It's my first 3D model I ever made.