The source marked this model as adult content.
- Downloads
- 703
- Likes
- 241
- Rating
- 5
130 models
Walthers grain elevator scaled down to Z scale. Prints easily with no supports. It is wise to print the pipes and glue them later on.
Walther GSP Front sight with aiming aid. Walther GSP Korn mit Zielhilfe.
Walthers Meduza cement company + Walthers Valley cement additions. Easy to print.
This is a challenge I gave myself. The goal was to design from scratch a replcia of The Deliverer from Fallout 4. The replica ressembles a Walther PPK with some minor difference. I tried to stay faithful to its shape while integrating…
Modified handle for Walther GSP with grip screws on the sides. Large and Medium size - shelf fits both. The shelf requires an M6x20 (max 24mm) HEX bolt, nut, and washer. For left-handed, just mirror. I tested that it fits mirrored. Works…
Gun Stand for Walther PDP As I was not able to find perfect stand for my Walther PDP, I decide to design my own. Its perfectly fitting when printed with PLA. You can also try PETG. Features : Minimalistic design (fits most Gun Safes) Easy…
Why Walther doesn't make a polymer baseplate that fits into their magwells is truly beyond me. Their engineers likely could have modeled this in 1/4 of the time it took me and they already have injection mold tooling, but leave it to the…
English Version: Hello everyone, this is my second model, which was created on the basis of a template published here. It is a visible indication that the handgun is empty and therefore safe. A friend of mine needed some that would fit…
Update 04.01.2024: I noticed a few mistakes, most importantly the screw size for the front tunnel, which is M3x12mm and not M3x10. I did some changes to the model because I noticed I was measuring the height at the wrong place. While I…
Walther P22 or similar air pistol RMR or RIS mount. This part is based on the general concept for the Walther Brand bridge mount giving the user the ability to mount parts above the slide by mounting a bridge to a support under the rails…
Quite difficult to print, requires many supports. See suggested gcode. Avoid honeycomb type supports - very difficult to remove and will break the delicate parts. Cut in slicer to smaller sections if necessary.
Walther P38 Semi-Automatic Pistol. (Replica)
This is an adapter to attach Streamlight SLR-8 laser sight to a WALTHER P99 AS .40 *** IMPORTANT FOR RESISTANCE*** Print Vertical with front against the printer bed. 100% INFILL Print as a whole , the piece snaps in. Place one rail and…
THIS IS A COSPLAY COLLECTIBLE AND COSPLAY PROP - THOUGH IT HAS SOME FUNCTIONALITY IT IS ONLY FOR DISPLAY AND COSTUME USAGE AND DOES NOT FUNCTION AS A FIREARM - DO NOT USE THIS IN ANY ILLEGGAL MANNER AS I WILL NOT BE HELD RESPONSIBLE FOR…
I love CI and emblems. Made this from a scan via CorelDraw! and SVG export. Printed it one color on top of the other color. Can also be used for printing two colors in one layerpack, but you need to use files. With TinkerCad you can…
Dry Fire Adapter for Walther GSP .22lr This adapter keeps your slide open in place that you can press the trigger and hammer only moves a little and stops on slide. Thanks to that you can safely train dry firing the pistol. If you can not…
Display Stand for Walther 9mm Pistols (P99, PPQ Q4 / Q5 Polymer and Steel Frame, PDP) Printed in PETG or PLA 0,2mm layer height 3 perimeters 25% Infill (grid)
If You are lefthanded and Your hand size and GSP model matches - congratulations. Added the “Core_GSP” part of the inner geometry so You can subtract it from Your own grip model.
Hier ist der PDP PRO kompatible Magazinboden. Einfach gegen den standard Boden tauschen und schon passen die günstigeren Magazine in eure Pro Version. Eignet sich auch super zum Personalisieren um die Magazine auf Wettkämpfen euch…
Pouzdro na pistoli WaltherP22 - ASA
I used these to replace the thick windows on Walthers Vulcan Mfg. Category: Hobby
this loading tool is made for 2 magazines(cylinders) so as shown on the picture can you move the pellets to the side in the grove after your done loading. and push the cylinders out from bellow when your done. Category: Sport & Outdoors
It can be really hard for your fingers and fingernails, when loading new rounds into your magazine. This helper strips the spring down and lets you load rounds easy. Designed in TinkerCad. Printed on Prusa MK3 with PLA.
I worked on a grip type Walther GSP for my PP800. I recommend some sculpting application like SculptGL to modify the Standard grip and leave it in the shape of the user's hand. Best sence with 50 % Infill
Vector Optics Frenzy-S 1x17x24 płytka do pistoletu Walther PDP
This model is also pretty high, but in your slicer you can just drag it under the printbed to make is smaller. For my Mantis X i only need 4 bumps on the rail, so that why the model is larger then the pictures on the actual Walther. Let…
This is a Gun Stand for the Walther P99 P.A.K.
This is a replacement roof for Walthers HO scale Pullman sleepers. Based on rebuilds the Southern Railway made starting in the late 1940s. See car diagrams from southern.railfan.net for specific car configurations. Model is a work in…
good fit and hold leaves solar panel open allows checking dot without removal
Vzhledově i funčně obdobná náhrada podpažbí pro vduchovou pušku Walther Anatomic LG300
This is a Replacement Lever for the Lever on the Walther LG400. Use Original Screw, may be a Little Tight.
Since most common gun safes are primarily made for rifles and have no proper way to store pistols, I made a modular pistol rack for either 2 or 3 pistols with the suitable gun stands for Glock, Walther and CZ 9mm (double stack) pistols.…
This is a magazine loader/ thumbsaver for the Walther SSP and SSP-E. Printed in PLA with 4 perimeters and 25% infill
I have a speed holster like this: OIP.Vuj6Ypqxh36jJEd-odIkAwHaHa (474×474) (bing.com) It is an older version of Ghost Ultimate EVO Holster Right Hand: Ghost Ultimate EVO Holster Right Hand (shootersconnectionstore.com) for Glock, but I…
Used my Creality Ender-3 S-1 printer, 0.2mm layer, 20% infill (grid), with supports on. You may need to rotate the model to sit with the “bottom” down. Printed in PLA, which seems to hold up just fine. EDIT 11/22/2023: changed the model…
The original model uses an extender to mount the silncer on the barrel. Well when kids are playing with… it’s only a question of time till the extender breaks…. So i made a remix to mount the silencer directly on the barrel. Looks nice…
A simple cheek piece for Walther LG400 economy. The cheek piece is really comfortable. The adapter plate is simple, but it serves its purpose. You will have to print two spacer sleeves. For the 20mm spacer sleeves, you will have to use…
A mount for installed LED lights into the HO-Scale and N-Scale Walthers Roundhouse kit. It press fits onto the roof support beams. A dab of glue couldn't hurt too! Works with LEDs from eBay with description: L3528r Pre Wired SMD 3528 --…
Distanzstück um die Pressluftkartusche vor dem rumwabbeln zu schützen wenn die nicht verbunden ist Spacer to protect the compressed air cartridge from wobbling when it is not connected
BOM: 1x X-Esse_Rail 2x X-Esse_Clamp 4x M3 threaded inserts 4x M3x6 button head screws or similar Print the parts standing up so the layer orientation matches the direction of force, especially on the clamp parts. Fit is very tight but…
Modeled after an original 1940's Walthers heavyweight Pullman car truck. This is the complete model. Designed for resin printing. The entire truck was scaled to HO and printed as one piece for my “Oscar” model If you need to paint it in…
These are two holsters for the compact 16ml pepper-spray bottles of Walther . I needed a way to somehow attach it to a cord, to hang it in an easy to reach spot inside my car. I printed it vertically using Prusament PETG – the…
The source marked this model as adult content.
Walther Rotex RM8 PCP airgun single shot magazine .177 caliber
This is a replacement cocking arm handle for a Walther LGR Air Rifle used for 10 meter competition shooting, they are no longer manufactured. Print instructions Resolution - 0.2 Infill - 20% Supports - From Bed Walther LGR Description The…
Basically the Walthers HW diner model is a perfect match for some Southern Railway diners… except for the goofy air conditioning ducts above the dining room. This is my attempt to rectify that. This is applicable for Southern railway…
You will also need 2 flathead M5 30mm screws and 2 Μ5 washers Category: Sport & Outdoors
you can replace it with original walther lg400 or lg500 trigger blade.
The bolt is secured by rotating the bolt handle. This also releases the bolt spring. This is especially useful if you store your bolt outside of your rifle. I printed it using PLA, which works fine, but feel free to use any material you…
PALMREST for Walther LGM-2 and other rifles with 5 deg rail. Palmrest You can Print, but in order to mount it You must mill (from Al or other metal) BRACKET to fit it to accessory rail - see attachment. Mount with 2 M5 screws - check the…
An alternative cocking handle for Walther LG400 Category: Sport & Outdoors
The rear sight on my PPQ 22lr broke within days of getting it. The stock sight is cheap cast aluminum with a dovetail that does not extend the whole way across the slot. On top of that, my firearm shot high. This is a fixed rear sight…
Made a simple surface cut so a Walther Q5 SF with Magwell and 15rd Mag inserted fits into the measurement box for BDMP PP3 (220mm x 140mm x 40mm) Use print settings like recommended from the original author. It's important to chose…
Magazine Rack for all Walther double stack 9mm Magazines (P99, PPQ, PDP) Made a Version for 4 and 5 magazines. If someone needs one for more or less magazines, double row rack (so 4 x 2 or 5 x 2 magazines), or holes (they can also easily…
post a pic when your done! 1、模型仅为皮肤mod,替换原版模型中的主要外型部件使用。要制作完成需要依赖原版模型文件。 2、需要在切片软件中拆分后再摆盘打印。 3、在原版模型的五金配件基础上需要替换或者新增的配件如下: 更换:3.0直径圆柱销长度32mm*1 更换:M5外径6长度35mm对锁螺丝*1套 更换:m3沉头螺丝,长度16mm*4颗 新增:m1机瞄光纤,7mm*1根,47mm*2根…
P99 PAK (9mm Blanks) Speedloader
Additional Hardware you need for this Print: 2x M5 threaded Inserts 2x M5 set screws (optional with a Polymer tip) I recommend the print orientation as seen on the Pictures. In this vertikal stand no support shut be needed. Depending on…
Additional Hardware you need for this Print: 2x M5 threaded Inserts (short ones. The max. length shut be 8mm) 2x M5 set screws (optional with a Polymer tip) I recommend the print orientation as seen on the Pictures. In this vertikal stand…
It doesn't mater what you use for material
Safariland duty holsters for the compact 4" slide Walther PDP contain a nylon barrel plug to stabilize the pistol. This is too long for the PDP Pro SD with the 4.6 barrel. Other solutions involve simply removing this plug. However this…
Modeled after an original 1940's Walthers heavyweight Pullman car truck. This is the frame. Designed for resin printing. The entire truck was scaled to HO and printed as one piece for my “Oscar” model
A walther/canik mag pouch with a finger cutout for indexing magazines quickly.
Walthers' older Amfleet II models didn't come with an interior. However they had super dark windows to make up for that. Yet if you're like me that's not really a good excuse. Designed to be a fit in place, low resolution, minimal effort,…
Vorderschafterhöhung um die originale Handauflage des Walther LG300 höher zu legen. Einfach in der benötigten Höhe drucken und mit längeren Schrauben zwischen Schaft und Handauflage montieren. In das vordere Loch kann ein M5 Gewindestift…
I was looking for a rack for six 9mm magazines for our Canik and Walther pistols. None, however, seemed right. This print fits on my Flashforge A5M Pro's 220mm bed. Google Gemini was a help in getting the slot width correct, but it didn't…
Walthers' older Amfleet II models didn't come with an interior. However they had super dark windows to make up for that. Yet if you're like me that's not really a good excuse. Designed to be a fit in place, low resolution, minimal effort,…
Holster for Walther PPQ for belt with protection. With wall and table mount... The holster has a gun locking mechanism, it unlocks with the push of a button. Additional parts; 1 screw 10x3mm and a metal spring with a diameter of 10/8mm…
This model was created in Fusion 360. It is designed to be printed with a resin printer. It was modeled after the stairs for a HO Scale Walters Observation car. This is just one part of a recreation of the “Oscar” car from Walthers.
Print files I used to create my version of a Walthers Oscar observation car. It is printed in HO Scale Printed on a Mars 2 Pro. Generic plant based grey resin. Standard settings. Printed at 45 degree angle. Look at the attached pictures…
Description Walther PDP Full Size (18rd) Triple Mag Holder - Tape Mount and screwed Version This is a "Duct Type" triple magazine holder designed specifically for Walther PDP Full Size 18-round magazines . This version features a large,…
UPDATED Design v2 Improved shape and surface texture. This is a replacement cocking arm handle for a Walther LGR Air Rifle. I have not been able to buy this as a spare part as they are no longer manufactured. Walther LGR Description The…
Mount your air cylinder with this spacer so it doesn't rattle around.
Railing for my Oscar platform. Designed to be printed in resin. Can be added to platform and printed as one piece. You will need a steady hand to paint it as an assembly.
Modeled after an original 1940's Walthers heavyweight Pullman car truck. This is the wheel. Designed for resin printing. The entire truck was scaled to HO and printed as one piece for my “Oscar” model
Print the windage adjustmen tool with about 6 perimeters from PET-G. Assembly it with: M8x120 screw with hex head .. 1pc M8 nut .. 2pcs M8 self locking nut .. 1pc Hot glue gun or epoxide to attach the handle to the screw head
Previously used the ‘F’ marked index key for a Streamlight TLR-4 on a Walther PPQ, but the light sat too far forward so I decided to make my own. I designed this to utilize both lugs so it is longer than standard keys. Using this key…
This is for manual version of the pistol, not for CO2 cartridge version. How I printed it I printed in PETG and ASA, both work. I think ASA may work for longer, but that's just my tip. Printed in models original orientation through 0.4mm…
you need to print part 1 then select parts 2 and 3 or part 4 and slide them together.
Look on better version of the holder Walther PDP Full Size (18rd) Triple Mag Holder - Tape Mount Version This is a "Duct Type" triple magazine holder designed specifically for Walther PDP Full Size 18-round magazines . This version…
Plain and simple, the anti roll thing on my Walther PL70r broke for some reason. Quick and simple replacement, which even is less painfull for the belt case to close, because it has parallel sides. Since the model is quite basic, i'll…
We all know the Walthers Amfleets roll like a brick. The proto versions are newer yet they roll worse than the older 932-series cars. So, why wait for Walthers new ball bearing trucks to be release sometime late next year and cost you $30…
Suppressor adapter for Umarex Walther CS88 pellet airgun. Suppressor thread 1/2"-20 UNF, same as Huben suppressors.
Ein Möglichkeit 3 Walther 850 Airmagnum, 1250 Dominator oder RM8 Magazine fertig befüllt zu transportieren und diese auch einzeln zu entnehmen. Das leere Magazin kann entweder zurück in die Box oder man verstaut es anderweitig.
Base and platform for my Oscar HO model. The base is designed to take a 3-axle truck. It is fixed and non rotating. Model was designed to be resin printed.
When building the Ho railraod model Blast Furnace from Walthers. It is hard to glue the 4 small walls that make the brick pilons under the building and keeping them square and aligned at the same time. With this jig you glue 2 together…
Modeled after an original 1940's Walthers heavyweight Pullman car truck. This is the axle. Designed for resin printing. The entire truck was scaled to HO and printed as one piece for my “Oscar” model
I hate not having tightlock couplers on passenger equipment. Not just for looks, but a Kadee 118/119/120 coupler really works keeping passenger cars coupled together on crappy module trackwork. So these models are drop-in replacements of…
I needed a pk380 magazine model for someone who is trying to create a reloader for it. The scan came out really nice, so i thought maybe someone out there will find a use for it. usual proviso, i am not responsible for what you do with…
print w/no supports use standard slatwall hooks, i.e. Amazon
Hello. I designed this Diabolo crown case for my Walther CP99. Printed in PLA without supports with a fill rate of 15%. For the assembly it will take 2 countersunk screws M3x8 or 3x10 no longer. one M5x80 socket head cap screw with…
A horizontal/vertical housing for digital thermometer. Category: Sport & Outdoors
made a model updating size to fit .22 pellet 2 different sizes
This Scatt sensor mount is designed to simply slide onto the compressed air cartridge. The sensor is secured via the dovetail interface. I 3D-printed it with Extrudr XPET G Matt and am highly satisfied. The durability and stability while…