Search results: werp

Sort order

834 models

P
Printablesmstejska

flowerpot with leaves

flower pot with leaves design dimensions: diameter 100mm height 100mm

Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant

Downloads
215
Likes
43
Rating
0
P
PrintablesAinon3Dtisk

Block, Brick, LEGO Flowerpot, Vase

Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…

Print approx. €7.30–€8.92 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
36
Rating
0
P
PrintablesKilberisch

Flowerpot Reservoir and Drainage Insert

This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
17
Rating
0
P
PrintablesFilip

Baby groot Flowerpot MMU

Model prepared for multi-color MMU printing. Printing settings: Filament: Prusament PLA Brim: No Infill: 15% Nozzle: Prusa HF 0.4 mm Prusa Slicer: 0.2 mm Speed MMU settings: Extruder 1: Brown Extruder 2: Black Extruder 3: Green

Print approx. €38.27–€46.78 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
14
Rating
0
P
PrintablesDieguito

Flowerpot or vase with potting plate

Flowerpot with potting plate, easily scale-able with modern design. It has a hole to use it as a flowerpot. and plate for water.

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
15
Rating
0
P
PrintablesIan Foulds

Filament-Inlayed Vase-Mode Flowerpot

You print this little flower pot in vase mode and then press fit the inlay into the channels. (They snap in when I print on my Mk4). It allows you to make a dual color design with only a single extruder. Once I had all the filament press…

Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
35
Rating
0
P
Printableseof

Multicolour Flowerpot / Mehrfarbiger Blumentopf

Simple Flowerpot which can be printed bicolour or multicolour. The gcode has the filament change instructions (M600) already built in. If you slice it by yourself, you must add M600 commands at the preferred layer. E.g. I have used for a…

Print approx. €2.93–€3.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
7
Rating
0
P
Printableseof

Multicolour Coaster for Flowerpots / Mehrfarbiger Blumentopfuntersetzer

No MMU required. Some M600 Filaint Change instructions in gcode. Diameter is 140 mm, you can scale it in the slicer. If you slice it by yourself, necessary change filament instructions (M600) must be added at the preferred layer. See also…

Print approx. €1.85–€2.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
4
Rating
0
P

Accessories - Box(es), extensions and more for electronics CG Scale / Zubehör - Gehäuse, Verlängerung und mehr für Schwerpunktwaage

Accessory parts for noticeably big, variable CG Scale. All the way from a F3x glider to anything like a 25kg warbird or jet! Additions and some remixes of the original CG scale parts from here ……

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
12
Rating
0
P
PrintablesJPMakesStuff

Mount for stack of PowerPole connectors

Needed a way to keep a few PowerPole connectors from falling on the floor Printed with PETG for strength

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
3
Rating
5
P
Printablestim.dwertmann

Flowerpot with saucer

Flowerpot with saucer. Easy to print and with water drainage at the bottom.

Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
1
Rating
0
P
Printableshebel78

Hangin_flowerpot

Flowerpot cover with a hanger for hanging on two screws. Printing in vase mode.

Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
2
Rating
0
P
Printablesradekrac

Baby Groot Flowerpot

Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad

Downloads
10,161
Likes
1,657
Rating
4.94
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor. Just glue the head with the body and enjoy it!

Downloads
2,183
Likes
586
Rating
4.85
P
PrintablesWekster

Powerpuff Girls

single and multimaterial

Downloads
1,802
Likes
141
Rating
0
P
PrintablesExtrutim

Big Flowerpot With Saucer | Planter | Flower Pot | Plantpot With Trivet

This is a large flower pot with drainage holes and a saucer. There is also a coaster on which the pot is elevated so that more water can drain from the pot to prevent root rot. The plates are equipped with a catch so that the pot is…

Downloads
1,635
Likes
330
Rating
4.71
P
PrintablesAndreas G

Collection of Flowerpots/Inner Plant Pots in various dimensions

Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…

Downloads
1,499
Likes
319
Rating
5
P
Printableselumspe

Yaesu FT-891 Powerpole Conversion

>> This mod may void the warranty! << >> Modify the radio at your own RISK! << Order a kit: Purchase a kit here: https://forms.gle/EGKaYYa485J8wiMW9 Go here for details: https://github.com/N0BOY/FT891_powerpole Enjoy it! - Jason Wang,…

Downloads
1,407
Likes
103
Rating
5
P
PrintablesHonza13

Groot flowerpot

Size: 100mm

Downloads
1,348
Likes
187
Rating
4.95
P
PrintablesArgiCZ

Easter Bunny flowerpot decoration

simple easter decoration

Downloads
1,310
Likes
193
Rating
5
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.

Downloads
1,141
Likes
242
Rating
4.67
P
PrintablesOpl

self watering flowerpot

Can be printed with vase mode. I recomend use some coating when you print it with vase mode. (for example hair spray) PETG or PLA nozzle 0.4mm extrusion widht 0.8 or waterproof pot in vase mode

Downloads
1,140
Likes
215
Rating
4.94
P
Printablesvelix

WAVY flowerpot

Hi, A part of my wavy collection, this plant pot is a clean and minimalist way to present your succulents and small plants. Best printed out of petg or other watertight material. This is an outer pot without drainage holes, meant to be…

Downloads
1,014
Likes
103
Rating
5
P
PrintablesPetr Vacek

Design Flowerpot Cover with Voronoi Pattern

Shiny, reflective or translucent materials enhance the look significatnly. Although my prints are water tight, I don't recommend using without inner flowerpot. Print in “vase mode” with 0.8 mm nozzle, 0.3 mm layer height, PETG. Scale to…

Downloads
890
Likes
401
Rating
5
P
PrintablesLA J

Flowerpot bust ancient greek/roman

3D-Scan of a beautiful flowerpot bust with an ancient greek/roman motive. Best prints with tree support.

Downloads
695
Likes
98
Rating
5
P
PrintablesDaniel

E-bike Bosch Powerpack 500 wall mount

The FreeCAD model is available in case you need to change the diameter of the screw holes (M1.4 6mm countersink). The charging cable can be removed without unscrewing the battery holder (which proved to be useful when you need to leave in…

Downloads
653
Likes
56
Rating
5
P
PrintablesEMPChaosFTC5828

Cone element for Powerplay FTC

For people waiting for their elements, here is the STL for the cone in First Tech Challenge's Powerplay. Good luck!

Downloads
652
Likes
2
Rating
0

Hands of Harmony Flowerpot

“Experience the beauty of nature held gently in the embrace of art. This unique flowerpot, designed with two sculpted hands, symbolizes care, harmony, and a deep connection to the natural world. Let your favorite plants thrive in this…

Downloads
619
Likes
120
Rating
4
P
PrintablesBass.Boi

Heavy Duty Pan&Tilt FPV for TowerPro MG90S 180deg metal servo

All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…

Downloads
616
Likes
51
Rating
5
P

PowerPole connector cable strain relief

Anderson PoperPole connectors are popularly used for Amateur Radio equipment, but for small low power gear the power cables are often small diameter and need some strain relief when soldered to a PowerPole connector. This clip supports a…

Downloads
594
Likes
86
Rating
4.86
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.

Downloads
581
Likes
125
Rating
5
P
PrintablesPhil6681

Flowerpot Blumentopf

Just a late night project that I did to get a little better in onshape. The version that I printed was at 60% size, which is why some details don't really show. Hope it gives your flowers the additional touch, they might have needed…

Downloads
543
Likes
37
Rating
5
P
PrintablesJasonCharlton

Anderson Powerpole Panel Mounts

These printable brackets allow you to panel mount Anderson Powerpole connectors in various configurations - from a simple 2x1 configuration (red/black power), to an 8x2 block (for what purpose, I have no idea, but if you need it, here it…

Downloads
530
Likes
84
Rating
5
P
Printables3D patlal

Ring lamp - statue / flowerpot stand

Illuminated stand for a statuette or flower. Used RGB tape. Easy to print. Two series of diodes used. Cut and soldered. Problem: Used cheap RGB tape - short power cable. When the wireless receiver is inside the stand, the signal range is…

Downloads
514
Likes
177
Rating
5
P
Printablesncsandor

Pyrite Flowerpot with Tray

Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…

Downloads
509
Likes
98
Rating
4.6
P
PrintablesSoskat

Pokemon Ivysaur Flowerpot

Ivysaur Flowerpot This is a remix of this Bulbasaur pot created by Openjuy . I made it for my friend who wants to enlarge his family of adorable Bulbasaurs pots. The design has not been tested yet, however it should be printed in one…

Downloads
504
Likes
107
Rating
5
P
PrintablesRob W1RCP

Anderson Powerpole Chassis Mount (for 2 stacked connectors) Updated 3-15-2025

Back in the day, I wanted to mount two Anderson Powerpoles into a sea-bird-like case from Xiegu. I didn't want to spend $27usd on one of these when a few minutes of designing would lead to a $0.75usd 3D print. Drill a hole just slightly…

Downloads
496
Likes
61
Rating
4
P
Printableseurad

Balcony Garden: Self-watering flowerpots/planters for balcony railings (parametric)

Flowerpots/Planters to fit between the rails of our balcony railings. OpenSCAD file is included so you can easily make it fit yours! There are two variants of the pot (measures in mm ): a smaller one that fits between two rails:…

Downloads
488
Likes
339
Rating
4.6
P
Printablesradekrac

Olaf flowerpot

Layer 0.20 mm, filling 25%, white PETG painted with acrylic markers, supports on the printing pad.

Downloads
478
Likes
71
Rating
5
P
PrintablesMartinL

Magnetic Flowerpot

This flowerpot was designed for growing of little herbs directly on your fridges. Dimensions 50x45x28 Used magnet dia.10 _5mm

Downloads
460
Likes
278
Rating
4.75
P
Printablesvelix

WAVY vase mode flowerpot planter

Hi :) This is one of my vase mode plant pots. As part of my WAVY collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…

Downloads
450
Likes
56
Rating
5
P
PrintablesTymyn_3D

flowerpot —> PARAMETRIC

How to change parameters? Model in the picture is printed in 0.32mm layer height. Seam position is aligned back . → because flowerpot is static object and no once will take it in hands and rotate it….sporadically. If you download f3d…

Downloads
447
Likes
96
Rating
4.67
P
PrintablesJens

Flowerpot

Round flowerpot with pattern

Downloads
428
Likes
49
Rating
5
P
Printablesaiannazzone

Honeycomb Storage Wall Hooks for Anker PowerPort Speed 5

With these hooks, you can attach your Anker PowerPort Speed 5 (or other similarly-thick power hub) to your Honeycomb Storage Wall. From there, you can leave USB cables hanging in the cable hangers (see original model) and leave your…

Downloads
427
Likes
123
Rating
5
P
PrintablesMileStorm

Rubber duck flowerpot

Just an easy remix of rubberduck, to make it fit some flowers, like cactus or tillandsia. It also has a excess water outlet in its butt. Some support to its beak is recommended…

Downloads
413
Likes
106
Rating
0
P
PrintablesIndibles

Easter flowerpot decoration

Easter decoration for your flowers

Downloads
404
Likes
77
Rating
5
P
PrintablesLeo

Flowerpot

A simple flowerpot in the shape of a sphere cut on both sides. This is a remix of my other model, differing in the shape of the outer decorative wall.

Downloads
401
Likes
53
Rating
5
P
PrintablesSonniik

Slime Rancher Plort Statue Flowerpot

Slime statue flowerpot I made for my bonsai tree. I printed this one scaled to 120 %. Supports are recommended for the top part of the mouth (organic supports worked best for me). The plort should hold inside without glue. I printed mine…

Downloads
374
Likes
88
Rating
4.33
P
Printablesmlax

Small flowerpot

I printed everything in PLA but every other material should also be okay. hope you like the model, give me your feedback in the comments. best regards mlax

Downloads
372
Likes
37
Rating
0
P
PrintablesNir

Maceta/Flowerpot Mazinger Z

Una maceta para tus plantas.

Downloads
367
Likes
40
Rating
5
P
Printablessteph3d

Cache-pot - flowerpot holder - planter

Hi ! There is a little something I designed for my girlfriend's office, I thought I could share it with you all ! Interior dimensions : 13cm width and 12 cm for the height of the hole. I recommend a 0.8mm nozzle and a line widht of 1mm,…

Downloads
350
Likes
52
Rating
5
P
PrintablesRed Haniwa

Anderson Powerpole small panel mount

A small but full-featured panel mount for Anderson Powerpole (15, 30 and 40a version). Come with a cutout template so you can use it to mark where to cut and drill on your panel. There's a hole in the middle for securing Powerpole…

Downloads
349
Likes
55
Rating
5
P
PrintablesVieWoy

Flower for flowerpot

Little decoration for flowerpots. For design changes there is .step file. Flower that will survive your behave. Water not needed. Bloom all the time in a year. Print Settings Rafts: No Supports: No Category: Decor

Downloads
346
Likes
45
Rating
5
P
PrintablesJakub

Hanging flowerpot

Hanging flowerpot for small overhanging flowers with integrated base. Flowerpot is 60 mm in diameter. No supports are required. Waterproof when printed with generic PLA, 0.15 mm layer and 0.4 mm nozzle.

Downloads
343
Likes
178
Rating
5
P
Printablesmlax

Bubble Flowerpot/Pencil holder

Print it with your normal settings.

Downloads
322
Likes
96
Rating
5
P
PrintablesSeb D

Flowerpot Vase 01

Tested on a 0.15mm layer height and 0.4 nozzle and vase mode. Other settings can easily be used and scaling in the slicer will work like a charm. Step file included for remixes !

Downloads
313
Likes
68
Rating
5
P
PrintablesSwiftyTheFox

Parametric Fused Anderson Powerpole Distributor

My take on a Anderson Powerpole distributor. The supplied stl files give you some options, but you can use the supplied OpenSCAD file if you want to increase the number of plugs. Part list: automotive fuses fuse clamps ("cable shoes")…

Downloads
304
Likes
63
Rating
0
P
Printablestrevor229

50A Anderson PowerPole Protective Cap

Took measurements of a 50A connector and basically remade it with divets instead of pins and a small ramp on the inside to make disconnection a bit easier on the plastic. It fits quite tight in there, about as tight as another connector…

Downloads
303
Likes
24
Rating
5
P
PrintablesOtter Ryrie

Flowerpot "Dead Man's Space Garden"/ Цветочный горшок "Космический сад мертвеца"

There are two versions of the model in the archive/ В архиве есть две версии модели. Printed on Flying bear 1s/Напечатано на Flying bear 1s Material/ материал: PLA or ABS Layer height/высота слоя: 0.2 Nozzle diameter/сопло: 0.4 My boosty:…

Downloads
298
Likes
165
Rating
5
P
PrintablesAmyRayn

Modern Flowerpot

Wenn Sie nicht selbst drucken möchten, können Sie auch direkt auf meinem Etsy-Shop bestellen: https://designdruckbymd.etsy.com/de/listing/1679554200/blumentopf-6cm-3d-gedruckt-arches

Downloads
291
Likes
71
Rating
0
P
Printablesncsandor

Pyrite Flowerpot #2 with Tray

Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…

Downloads
288
Likes
57
Rating
5
P
PrintablesNikdfish

Fused Anderson Powerpole supply block

01/29/2023 - added 4 connector version - added pics showing flexible wire use and battery connector (nickel plated steel) buss bars. The model has two parts, the block & the cover. The block has slots for ¼" female quick disconnects (used…

Downloads
286
Likes
66
Rating
0
P
Printablesdtxtr

SOG Powerpint Thumb Bar

Since I couldn't find a matching thumb bar, I reengineered one that follows nicely the curve of the notch. I printed it in PETG with a brim and used a cutter and a bit of sanding to give it a bit of a chamfer. You can use a dab of super…

Downloads
281
Likes
22
Rating
5
P
Printablesnotspelledright

Bosch Powerpack 500 Battery Wall Mount (side view)

Same rough design as the original model, except that the screw holes were resized and moved. Print it and mount it to the wall with some anchors! Additional pass-through holes are provided you let you get a screwdriver in to access the…

Downloads
279
Likes
19
Rating
5
P
PrintablesIndibles

Easter spring flowerpot decoration

Spring decoration for your flowers

Downloads
276
Likes
75
Rating
5
P

Flowerpot coaster / 21 sizes

DE: Ein Untersetzer für Blumentöpfe in verschiedensten Größen. EN: A coaster for planters in different sizes.

Downloads
271
Likes
51
Rating
5
P
Printablesmstejska

Flowerpot

Internal dimensions are: 80 mm bottom 100 mm top 75 mm depth

Downloads
268
Likes
31
Rating
5
P
Printableseponra

Pinksie the Whale - Flowerpot 65mm

I stumbled about that Whale Tealight Holder, and found that to be ideal for a planter pot if the potpart would be a tad bigger. So i edited this in Tinkercad, and thats what came out of this! Print instructions Category: Containers Print…

Downloads
265
Likes
59
Rating
4.5
P
PrintablesJesse

SOG PowerPint Thumb Bar Tabs Flick Stick

3d printed inserts to fit into the SOG PowerPint multi-tool. Press in place using plyers and glue using cyanoacrylate (super/crazy) glue. Print at 0.2mm layer height using a 0.4mm nozzle. 0.6mm nozzle will also probably work. Several…

Downloads
264
Likes
20
Rating
5
P
PrintablesDee

Anderson Powerpole Shroud

This is a shroud for the 15/30/45 amp series of Anderson Powerpole connectors. There are two files: One with a 0.24" cable opening, and one with a 0.16" cable opening. Both are included so you can drill out the size cable you need. I'd…

Downloads
263
Likes
53
Rating
0
P
PrintablesLeo

Flowerpot

A simple ball-shaped pot with decorative round holes. While creating it, I was inspired a bit by a golf ball. The model consists of two walls connected at the top and bottom: the inner pot, and the outer one, which has a decorative…

Downloads
261
Likes
43
Rating
5
P
Printablesg7kse

Flowerpot antenna

A handy coil and base for your new best 2m antenna A bit of a description is here Please tweak and optimise. Be careful with whatever you sleeve the co-ax for RF absorption. Even some fairly simple stuff like fibreglass will have some…

Downloads
261
Likes
45
Rating
5
P
PrintablesThump2010

Ham Radio Dual PowerPole with USB "Juicebox"

A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…

Downloads
254
Likes
84
Rating
5
P
Printablesfaw3b

Flowerpot Low Poly Large

Inner Diameter: 132mm Outer Diameter: 160mm Heigth: 140mm Printed with Prusament PLA Blend Viva La Bronze

Downloads
250
Likes
37
Rating
5
P
PrintablesTymyn_3D

Flowerpot-Knurling texture

If you have size requirement, let me know and i will do it. Flowerpot with Knurling texture, which is used on gun grip. Need 35 metres of filament. Printed from Prusament PETG Jet Black. If you print it, let me know in comments.

Downloads
247
Likes
60
Rating
5
P
PrintablesLišák

Self watering flowerpot

As I am one of the person, who always forget to water the flower or plant, I designed simple selfwatering flowerpot for my chilli plants. Print instructions I recommend printing it from PETG to have it watertight. Printable on Prusa MINI…

Downloads
240
Likes
49
Rating
0
P
PrintablesSouky1122

Smile Flowerpot

a cute smile flowerpot that you can resize as you like. happy printing! printed 0,24mm 2 perimetres

Downloads
240
Likes
57
Rating
5
P
PrintablesLeo

Flowerpot

Simple flowerpot. Well, maybe not very simple, but it has an interesting shape. The photo shows a PETG print, 0.3 mm layer. It was test print, therefore the quality is poor. I suggest you print with a 0.2 layer. The flowerpot consists of…

Downloads
239
Likes
42
Rating
5
P
PrintablesZneuzity

Flowerpot kettle - remixed into a functional teapot kettle + lid

Remixed it for my daughter to be used as toy in a small kitchen I just create a brand new lid and add hole. Original was much bigger than mine. Can be printed without any support.

Downloads
239
Likes
18
Rating
0
P
Printableskdsjr

Anker PowerPort Atom III USB C hub holder

Based on design for other anker USB hub. I attach this using command strips but added a version with holes for M3 countersunk screws as well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20…

Downloads
237
Likes
31
Rating
4.89
P
PrintablesEvroc

Flowerpot with drain

Hello guys. It's a simple flowerpot with a drain. It can be used for different kinds of plants. I suggest you put some small stones on the stand before planting anything. Hope you like it. :) Update: As someone mentioned - I added the…

Downloads
237
Likes
35
Rating
5
P
PrintablesJangy

Blossom Powerpuff Girls

Blossom Powerpuff Girls You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures

Downloads
228
Likes
14
Rating
0
P
Printablesncsandor

Sunny House Flowerpot with Tray

Flowerpot and tray inspired by the unique sunny houses in Szeged. (In Hungarian: "Napsugaras ház") Unfortunately, there are fewer and fewer of them, they will perish or disappear. From the rectangular opening depicting the eye of god, the…

Downloads
225
Likes
54
Rating
5
P
PrintablesMatthijs

Behringer Powerplay P1 battery cover

The latch of the original cover is too flimsy and will break off easily. This replacement cover is not an identical copy (with the same problem), but uses a different latch spring concept. Since this lid will sit slightly deeper inside…

Downloads
225
Likes
8
Rating
5
P
PrintablesValentino Hesse

HEXA Flowerpot

Print set. PLA/PET-G Nozzle: 0.4 mm Layer: 0.2 mm Infill: 5-10 % Support: NO Speed: 40 mms (EN) Design flower pot for home and outdoor cultivation. It can be optionally enlarged or reduced. Be sure to upload print photos. (CZ) Designový…

Downloads
223
Likes
41
Rating
5
P
PrintablesStefan

Small Flowerpot / kleiner Blumentopf

Small flowerpot - size about 40x40x42mm - with drainage. Coaster optional. Looks best printed with fuzzy skin on outside walls. 15 flowerpots will fit in this plantcoaster 0.4 nozzle, 0.3 layer height, no supports, ~9 gram filament for…

Downloads
215
Likes
10
Rating
4.5
P
PrintablesEvroc

Flowerpot with drain

Hello guys. For few months I am trying to grow succulents and other plants. Many pots there don't have any drain, so I've created one by myself. The pot consists of 2 parts as shown in the pictures. Don't forget to add small stones on the…

Downloads
206
Likes
44
Rating
5
P
Printableshoeni

Anker Powerport holder (Powerport | PD)

I used simple double-sided tape to attach to the wall.

Downloads
204
Likes
35
Rating
5
P
PrintablesMotbrok

Antwerp Historical Centre

A model of the historic centre of Antwerp. Extracted and polished from open map data provided by the city. You can prominently see some historic buildings such as the Cathedral and the KBC-tower that make up most of the relief in the…

Downloads
199
Likes
21
Rating
0
P
Printablesvelix

LINES vase mode flowerpot planter

Hi :) This is one of my vase mode plant pots. As part of my LINES collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…

Downloads
198
Likes
38
Rating
5
P
Printablestheworkshope

Anderson Powerpole Retention Clip

Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal…

Downloads
195
Likes
14
Rating
5
P
PrintablesMike F.

Desk mount for Anker PowerPort 6 USB charger

I spend the last few days designing and developing a simple mount for my Anker PowerPort 6 USB charger because it took away too much space on my desk. So I decided to attach it to the side of my wooden desk. To design it I used Autodesk…

Downloads
194
Likes
41
Rating
5
P
PrintablesAlex

Anker PowerPort Atom III Slim Charger Under Desk Mount

Desk mount for a Anker PowerPort Atom III Slim Charger to be mounted under the table. The main goal was a tight fit for easy cable plugging and unplugging without any wiggling. Edit I made this model because there was none when I first…

Downloads
191
Likes
24
Rating
5
P
PrintablesDsk001

Powerpuff Girl Base for Wekster Figures

Powerpuff Girl Base for Wekster Figures Girl Figures not included The base can be printed in 3 ways Clouds Only Hearts Only Hearts + Clouds There are printed without support and the one in the picture was done without MMU (but MMU is…

Downloads
190
Likes
44
Rating
0
P
Printablescmos

Wandhalter für Bosch eBike Akku Powerpack 500 | wall bracket for Bosch ebike battery "PowerPack 500"

Ladestecker passt exakt in den Halter, sodass der Akku beim einsetzen kontaktiert wird. | Charging plug fits exactly into the bracket so that the battery is contacted when inserted. In addition I used THIS model to fix the charter to the…

Downloads
190
Likes
17
Rating
0
P
PrintablesEvroc

Flowerpot with drain

Hello folks. The pot consists of 3 elements - the main part, the big and small roof. All parts are super easy to assemble, you don't need any glue - just a little push. The project has a pretty effective drain so you won't flood your…

Downloads
189
Likes
47
Rating
0
P
PrintablesHeinsius

Logitech Powerplay Base

This is a base for logitech powerplay. The idea to tug in the powerplay tightly and cover it up with a larger desk pad without having any bumps, ledges or sharp corners. I provided the Fusion360 files so you can customize it to your…

Downloads
189
Likes
11
Rating
0
P
Printables3DBASTI

PowerPole Einbaubuchse

PowerPole Einbaubuchse Universell

Downloads
188
Likes
20
Rating
5
P
PrintablesDavew909

Shark PowerPro IZ380 Wall Hook

Wall mount for Shark PowerPro IZ380. This uses the clip on the back of the vacuum to attach to the bracket

Downloads
186
Likes
5
Rating
0
P
Printablespmichaud

Keystone adapter for PowerPole connectors

This is a keystone adapter to mount Anderson PowerPole connectors into a keystone jack. My printers have 0.6mm nozzles, so I print these using 0.4mm layer height and 100% infill. For smaller nozzles a 0.3mm or 0.2mm layer height will…

Downloads
186
Likes
32
Rating
5