Search results: works

Sort order

1,801 models

P
PrintablesDET-Man

Soldering Iron Holder for Dremel Workstation - A Heat-Set Insert Press

When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…

Downloads
7,792
Likes
226
Rating
5
P
PrintablesTrajan

Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)

This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…

Downloads
1,086
Likes
132
Rating
4.86

Prusa MK3.5/MK3.9/MK4 centre tray/cable tidy (now works with Y belt tensioners and Prusa enclosure)

To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…

Downloads
942
Likes
312
Rating
4.81
P
PrintablesAdudino

Design Waste Bin / Trash Bin - for Desk, Kitchen Counter, Workspace, ..

Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…

Downloads
860
Likes
193
Rating
4.78
P
PrintablesSteph_Nuggs

Functional spring w built-in support in the file. - Works with PLA

Working flexible spring made from PLA filament 0.4mm nozzle 0.2mm Layer Height 10-20% infill no raft was necessary to print fun to watch the entire print wobble on the brink of destruction and then come out perfectly in the end. tested 3…

Downloads
601
Likes
45
Rating
5
P
PrintablesPlatzhalter

Flexible Pen with a simple design - works with 2,8mm Pica leads

This pen uses its own stiffness to grab on a 2,8mm lead (also used by Pica pencils see here: https://www.pica-marker.com/en/pen/pica-dry ) The lead is simply inserted from the tip wile pressing on the walls adjacent to the cutout on the…

Downloads
564
Likes
246
Rating
4.2
P
Printablesbigheadcam

ZSA Voyager Tenting Bar - Works with Mag Feet

No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is designed to fit snugly over the magnetic feet that come with the Voyager, which provides a sturdier and…

Downloads
449
Likes
10
Rating
5
P
PrintablesGilles160

Painting workshop for my Warhammer soldiers

There is not much to say. I believe that the photos are self explanatory I printed with PETG but PLA would work too My son is named Felix. Please replace the name by yours or anything else as needed

Downloads
348
Likes
133
Rating
0
P
PrintablesKutilman Yuri

Shopping cart opener - works in many countries

This small gadget will let you open most shopping carts for euro coins. To use in other countries, please scale (in all axis) to different size. I noticed there are many gadgets of this type, but I designed this one from scratch and…

Downloads
297
Likes
27
Rating
4.75
P
Printablesbigheadcam

ZSA Voyager Tenting Bar V2 (Works with Mag Feet)

This is a major revision of the previous version and reduces the print time/material consumed considerably. No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is…

Downloads
290
Likes
20
Rating
4.67
P
PrintablesHermannSW

Shroud for AMD Instinct MI50 workstation GPU and BA10033B12H BBQ blower fan

Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…

Downloads
263
Likes
14
Rating
5
P
PrintablesREMLURELMI

Pen Pointer (also works with pencils)

Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove

Downloads
162
Likes
30
Rating
4
P
PrintablesMrLogston

Norway Maple Seed Whirlybird that actually works, 5 minute print time

Maple seeds remind me of the fall, as they literally fall during the Fall. There are none near me, so why not print it! video of drop test #2: video of drop test: After searching online and finding a few existing designs to print, none…

Downloads
98
Likes
27
Rating
5
P
Printablespstimpel

Prusa I3 Autorewind Spoolholder and Filamentguide - gravity works

Inspired by the "Sisyphus Auto-Rewind Spool Holder" made by Vincent Groenhuis I thought it would be much better to replace the original spoolholder with one that works based on gravity as well. The main issue this spool holder solves is…

Downloads
91
Likes
5
Rating
5
P
PrintablesMatthewGTaylor

Phone Stand - prints great - works with most cases

Desktop phone stand. Simple and robust. Fits naked phones and cases up to 14mm (0.55") thick. Also works with Loopy cases and Popsockets. Works in portrait and landscape mode. Slightly improved over the previously posted version. Print…

Downloads
76
Likes
3
Rating
0
P
PrintablesDoubleH

Greenworks Pro 80v Air Concentrator

I created this adapter to allow me to better use my blower backpack to air dry my car after washing. It is intended to concentrate the air to provide better drying performance. I recommend printing with the round end down and with…

Downloads
75
Likes
11
Rating
0
P
Printablesgwendal

Shaper Workstation Inverted Jigsaw table

Inspired by the Festool CMS PS 300 module, parts to install the PS300 Jigsaw inverted and collect dust (barely) using a Festool Cleantec hose. The plate is a shaperhub project . In addition the model includes a connector to fix the plate…

Downloads
64
Likes
26
Rating
5
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Downloads
54
Likes
15
Rating
5
P
PrintablesYuryK

Volume Knob GigaWorks T20/T40

Replacement of the original Creative GigaWorks t20 or t40 volume control. More control and better grip

Downloads
33
Likes
6
Rating
0
P
Printablesgwendal

Shaper workstation trim router table Connector

Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.

Downloads
27
Likes
10
Rating
0
P
Printablesdubmehard

Gnomarell: gnome watching construction works

Hello, gnomarell, the gnome watching construction works. Thanks for your download, enjoy the print.Hello,

Downloads
26
Likes
5
Rating
0
P
Printablesthrasher

VESA Mount for your Bike Workstand

About This VESA plate allows you to mount a compatible monitor or TV in a bicycle workstand. Its clamping area is a 36mm “tube-section” that fits neatly in the jaws of the workstand with no sharp corners. The top-end is filled so that it…

Downloads
22
Likes
8
Rating
0
P
PrintablesCardinalSong

F8R Label holder for Michigan Synth Works F8R

I love my Michigan Synth Works F8R, and I wanted a way to label the CV routings on the unit so I don't have to remember them. I exported the gcode with supports, mostly because I wasn't sure if it would print well without them in the…

Downloads
12
Likes
2
Rating
0
P
PrintablesTMBG

Workshop light holder / stabiliser

I designed this holder / stabiliser for the Philips RC620X1 flashlight. The model stabilises the work light when there is no metal surface for it to hold onto. Without a stabiliser, the lamp easily falls over and is frustrating to work…

Downloads
11
Likes
0
Rating
0
P
PrintablesCableFPV

Black Dog Cycle Works Helo Pad Rotopax Plug

The Black Dog Cycle Works Helo Pad leaves holes in the top surface when a rotopax is not in use. These plugs should help stop precipitation from getting into the rear cargo compartment when nothing is being carried on the rack. While…

Downloads
10
Likes
1
Rating
0
P
PrintablesMad2_3D

Ryobi Storage Bin Worksurface Mount

This hack enables you to close off the top of the Ryobi Storage Bin. By closing off the tray/bin with a flat worksurface your stuff is secured, and you can add tools (miter saw) to the top of it. You will not have to remove the tool from…

Downloads
9
Likes
1
Rating
0
P
PrintablesGizmo Goody

Parametric Gridficiency (and Gridfinity) Thermoworks RFX Wireless Probe Charging Block Dock

Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…

Downloads
9
Likes
0
Rating
0
P
Printableslayerguru.com

Modular shelving system - Hobby & Workshop - Small parts storage

This collection will be updated with new models from time to time! Ideas and suggestions on sizes and features are welcome! For full collection and editable STEP files, please purchase the full pack from here: Full Pack Download Modular…

Downloads
24,838
Likes
11,968
Rating
4.85
P
PrintablesDET-Man

BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door)

This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…

Downloads
13,560
Likes
276
Rating
4.78
P
PrintablesFreshPrints

Anycubic Kobra 2 Pro Bed Level First Layer Calibration Squares and Brim Test Also works with Kobra 2 / Kobra 2 Neo

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…

Downloads
6,450
Likes
304
Rating
4.89
P
PrintablesB M A

*REALLY WORKS* Centauri Carbon Silencer Quiet DUAL Fan Shroud Muffled Intake Exhaust & Improves Internal Temps

All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…

Downloads
5,896
Likes
908
Rating
4.94
P
PrintablesFreshPrints

Anycubic SNAP-ON Bed Sheet Aligners Kobra 2 PRO , Kobra 2 , Kobra 2 Neo Works with the Strain Relief and Cable Drag Chain

Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…

Downloads
5,504
Likes
601
Rating
4.93
P
PrintablesPeterH1500

100mm / 4" Truncated & Full-Size Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…

Downloads
5,148
Likes
843
Rating
4.85
P
PrintablesFreshPrints

Anycubic Kobra 2 Max SNAP-ON Bed Sheet Aligners V3 works with Strain Relief or with Cable Drag Chain

Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…

Downloads
4,085
Likes
314
Rating
5
P
Printablestonpa888

Camera Backpack Mount (works with heavy DSLRs)

This mount allows you to quickly and securely attach your camera to the shoulder strap of your backpack. Using this mount you can access your camera at any time during activities such as hiking and never miss a moment. These types of…

Downloads
3,161
Likes
1,243
Rating
4.89
P
PrintablesTucksProjects

Hole Cutter (works with Dremel) 19 sizes (metric + imperial)

Works with rotary tools like Dremel, Wen, HyperTough, etc. Attaches using 3/4 threads. Cuts 19 sizes of holes from 2"-6.5" Use 1/8" cutting bits like Rotozip Edits: Added Metric version Added slider insert version that allows the user to…

Downloads
3,146
Likes
1,325
Rating
5
P
Printableshockeygoalie35

Gridfinity - Solidworks Template

Thanks to Zack Freedman for the awesome Gridfinity concept. I remade it in SolidWorks for easy configuring. Just use the equations to change the x and y size, and the depth to move the main extrusion down. then add your features for…

Downloads
3,096
Likes
117
Rating
5
P
PrintablesEllieWhoMakes

Parametric Gridfinity Solidworks

This Is a port of the Gridfinity box to Solidworks and it is smart and fully equation driven file. Credit for the original design goes to Zack Freedman. All I did was port it to Solidworks. Link to original files…

Downloads
3,009
Likes
175
Rating
4.88
P
PrintablesAMTprojects

Fillet diameter radius gauge | Workshop coaster

What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…

Downloads
2,907
Likes
1,117
Rating
4.85
P
PrintablesMeyui

Workstation System Stackable Part Drawer Organizer

StackDrawer Workstation System Workstation System Stackable Part Drawer Organizer // Updates // 2026.09.14 - Added the Drawer Label.stl and Customizable Label.3mf The StackDrawer Workstation System is a modular drawer-based storage…

Downloads
2,779
Likes
1,377
Rating
4.93
P
PrintablesRainer

Customizable Sign Workshop (MMU,Multicolor or Single color printer)

The customizable Sign Workshop You can use this customizable thing to create a huge Variety of Signs. Main Features: Optimized for Single Extrusion (one color) printers Multi Extrusion (multi color) printers (e.g. MMU / MMU2 /etc.)…

Downloads
2,517
Likes
456
Rating
5
P
PrintablesStreelyDan

Mini Rack 10" server rack for NavePoint or Gator Rackworks rails

Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…

Downloads
2,406
Likes
664
Rating
4.86
P
PrintablesSebastianDruckt

Paper towel holder for large workshop paper towel rolls

As the original model did not fit larger rolls i remixed it quick and dirty. Now rolls with a diameter of up to 240mm fit in the holder. This should be enough for the standard “blue workshop paper towel roll”. I only created on model. to…

Downloads
2,174
Likes
281
Rating
4.4
P
PrintablesMordiev

Double Stack IKEA LACK Enclosure V2 (works w/ MMU2s)

This is a printer enclosure large enough to hold the Original Prusa i3 MK3s with the MMU2s and five spools of filament. It is remixed from strita's Prusa Printer Enclosure V2 . The Version 1 you see next to it in the pictures can be found…

Downloads
2,068
Likes
570
Rating
4.76
P
PrintablesPeterH1500

100mm / 4" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…

Downloads
1,984
Likes
380
Rating
5
P
PrintablesMr Robot

Workshop Storage - Dremel Bit Storage

I've created a set of handy modules to hold stuff that I regularly need on my workbench. This one holds Dremel Bits As seen on Zack Freedman's Youtube Channel

Downloads
1,897
Likes
417
Rating
4.83

Meta Quest 2 Wall Mount - Also works with OG Quest - Oculus

If you print this for a Quest 3, please let me know in the comments how well it works. Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you…

Downloads
1,779
Likes
529
Rating
5
P
PrintablesPeterH1500

63mm / 2½" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…

Downloads
1,711
Likes
376
Rating
5
P
PrintablesSketch Me To

Multi-Function Workshop Packer / Shim (Scraper + Blade Holder)

This multi-function workshop packer is designed as a compact, low-filament consumable for everyday workshop use. It combines several common tools into a single print, making it ideal for quick jobs, setup work, and using up the last part…

Downloads
1,655
Likes
356
Rating
5
P

PAINT BRUSH RACK / PAINTING RACK / PAINT TOOLS / ORGANIZER / BRUSH RACK / WORKSHOP TOOLS

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PAINT BRUSH RACK -…

Downloads
1,640
Likes
663
Rating
5
P
PrintablesGeorge42rus

Parametric Sock Dryer (Solidworks)

To change you need to use Solidworks 2022 or later

Downloads
1,570
Likes
715
Rating
4.89
P
PrintablesKingCharles

Cookie cutter - Squirrel - Works super easy, great results

We found a lot of cookie cutters for 3d-printing that looked very cool, but often didn't work so well in reality. This one here has now been thoroughly tested and optimized several times. After having eaten a thousand cookies, we have…

Downloads
1,559
Likes
357
Rating
4.94
P
PrintablesWanaGo

INGCO 20V Battery - Workshop Holder / Bracket

INGCO 20V (P20S) power tool battery bracket / mount, for holding/hanging your Ingco batteries up on the wall in your workshop space. Batteries clip in place with the battery lock. Features recessed countersunk screw holes. Printed flat on…

Downloads
1,473
Likes
78
Rating
5
P
Printablesoccupied_brain

11 in 1 - Workshop Multipurpose Tool

11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…

Downloads
1,340
Likes
550
Rating
4.53
P
Printablessbuerger

Elephant foot compensation test (that REALLY works)

Why calibrate Elephant foot compensation at all? Well, I have to admit that I used “standard” values for EF compensation for years. But I stumbled over this matter when designing my printed pinhole lens where I use the EF compensation…

Downloads
1,310
Likes
93
Rating
5
P
PrintablesPeterH1500

100mm / 4" Butterfly / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…

Downloads
1,270
Likes
238
Rating
5
P

Ultimate 3D Printer & Workshop Desktop Organizer

Über dieses Projekt / About this Project Ein kompakter, durchdachter All-in-One-Desktop-Organizer, der speziell für die Werkbank von 3D-Druck-Enthusiasten und Makern entwickelt wurde. Endlich fliegen Nozzles, Dremel-Aufsätze, SD-Karten…

Downloads
1,262
Likes
667
Rating
2
P
PrintablesAlley Cat

Pager Style Holster for the muzi.works H1 Heltec V3 Case

UPDATE: I took out the lump because it wasn't really needed and gets in the way of most lanyards and some mods. Added a version that works with M2.5 nuts for the Baofeng clip. I based it on the style of the holsters for my Alley Chat HT…

Downloads
1,182
Likes
223
Rating
5
P
PrintablesChrisWilmshurst

TV Guides for LED Strips - Philips Hue Gradient (works with others and Monitors)

Have you ever had an issue with RGB strips falling off the back of your TV? Well, so have I. I was also very unhappy with how it bounced off the back of the wall and the lack of even glow around the TV. So, rather than spend an extra…

Downloads
1,178
Likes
168
Rating
4.83
P
PrintablesBearded Printer

The Ultimate Ergonomic Workspace Work Station

Keep your projects at just the right angle as you work! This model is modular, allowing you to use parts you find will be helpful to you! And it features holes to fasten it to your work bench! Update March 27, 2024: Added rotating plate…

Downloads
1,160
Likes
1,286
Rating
5
P
PrintablesKea Workshop

"KEA" Profile Choc V1 Keycaps - MX Spaced - by Kea Workshop

Pictured Keycaps Printed on Bambu Lab X1C using Textured PEI Plate These keycaps are MX spaced (19.05mm x 19.05mm), for Choc V1 Switches. You can find the CHOC spaced (18mm x 17mm) version here ! My Print Settings are the following: Layer…

Downloads
1,030
Likes
146
Rating
5
P
PrintablesCameron

Pottery & Workshop Calipers

Whether in the workshop or the pottery studio, with one measurement you can get the inner and outer diameter of any piece! Perfect for making two pieces match so they fit together, whether that be pottery lids on teapots, wooden jars, or…

Downloads
1,026
Likes
207
Rating
5
P
PrintablesMichael Roth

Parametric Box - SolidWorks

I needed a parametric box for a different project but none of the ones I could find used SolidWorks, except one that really wasn't parametric and didn't seem to work. This one is truly parametric. All you need to do is edit the Parametric…

Downloads
973
Likes
69
Rating
5
P
Printablestehspiah

H1 iv Case for Heltec V4 (Modified Muzi Works H1)

Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…

Downloads
941
Likes
92
Rating
0
P
PrintablesSASSy Design

Star Fireworks Plant pot and Planter - Winter ornament decoration - Vase mode design

Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…

Downloads
907
Likes
296
Rating
5
P
PrintablesOttaRoss

Workshop Painting Pyramid Stands

When painting and finishing woodworking projects, I'll often use scrap chunks of wood to support a painted face and clean it up afterwards. I finally got around to designing a small (3.5cm tall) pyramid or cone-like thing to do that job…

Downloads
899
Likes
166
Rating
4.8
P
PrintablesFreshPrints
Downloads
898
Likes
157
Rating
5
P
PrintablesMeyui

Workstation System Stackable Part Drawer Organizer

StackDrawer Workstation System Workstation System Stackable Part Drawer Organizer The StackDrawer Workstation System is a modular drawer-based storage solution designed for efficient parts management and desktop workflows. By combining…

Downloads
894
Likes
544
Rating
5

Cal Kestis Lightsaber Parts for Savi's Workshop Lightsabers

Cal Kestis/Jaro Tapal parts for your Savi's Workshop lightsaber. You need a round 3mm x 2mm magnet for the interior switch plate. Category: Props

Downloads
838
Likes
179
Rating
4.8
P
PrintablesMaksym Mihovk

The ultimate spool clip that works with almost all brands

Of all the filament clips I have received and printed, I have always been happy with the filament clips supplied by Sunlu although they are not compatible with all brands of filament. That is why I've made a Filament Clip from Sunlu's but…

Downloads
827
Likes
147
Rating
5
P
PrintablesWanaGo

INGCO 20V Tool - Workshop Holders / Brackets - V2

INGCO 20V (P20S) power tool bracket / mount, for holding/hanging your tools in your workshop space. VERSION 2.0 Improved version of this: https://www.printables.com/model/299468-ingco-20v-tool-workshop-holders-brackets Better fit,…

Downloads
819
Likes
39
Rating
5

Improved, new, reusable zip ties! 4 lengths to choose from, batches included, PETG recommended, but PLA works too, v2.0

Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…

Downloads
804
Likes
124
Rating
4
P
PrintablesJamie Claye

Lockheed Skunkworks F-117 (Nighthawk)

My Step-Dad worked in the Lockheed Skunkworks when they were developing the F-117 - though he swears he didn't work on it. (wink wink) Anyway, I made this for him as a Christmas gift - and printed it 'transparent' because it was…

Downloads
795
Likes
58
Rating
4.8
P
PrintablesMB TECH

Heavy Duty Double Hook For Garden Shed Or Workshop Tools

0.2 layer height 0.6 or 0.8 width for faster/ stronger print 3 or more walls 5 top/bottom layers 15 - 20% infill should be enough but at least 25% recomended

Downloads
774
Likes
135
Rating
5
P
Printablesjbfish

C-Clamp Set – Multiple Sizes for Workshop and Play

Originally I designed these C-clamps because my daughter kept “borrowing” my workshop clamps to build blanket forts and attach blankets to furniture. So I decided to make a few printable versions specifically for that purpose — and they…

Downloads
748
Likes
341
Rating
4.5
P
PrintablesDoak

Wall Display for Savi's Workshop Lightsaber

Display your Savi's Workshop Lightsaber in style! This display is broken down into parts sized to fit on a standard 20x20cm bed. All of the weight is carried by the “Body Top” and “Saber Hook” components, which I'd print pretty strong.…

Downloads
739
Likes
209
Rating
5
P
PrintablesPeterH1500

63mm / 2½" Butterfly / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

20May20 Marius-Bloemhof requested the CAD files: ( https://cad.onshape.com/documents/5425e358a4e266ea950b034e/w/fb495421e309359b374e4475/e/07ed980bcf8592c544c8964f ) Update 24Aug20: I've posted a new design for a blast gate based on a…

Downloads
736
Likes
134
Rating
5

BRAZO ROBÓTICO EDITABLE SOLIDWORKS Y STEP

🦾 Brazo Robótico Impreso en 3D – Modelo Personalizable Este brazo robótico ha sido diseñado para ser funcional, didáctico y fácil de imprimir. Ideal para estudiantes, makers y entusiastas de la robótica que buscan un proyecto práctico con…

Downloads
729
Likes
12
Rating
4
P
PrintablesAlley Cat

Pager Style Holster for the muzi.works H2T Heltec T114 Case

I based it on the style of the holsters for my Alley Chat HT Pocket, and I think it goes really well with the H2T design. Baofeng Belt Clip Generic Belt Clip Heat Set Inserts This is a new work completely owned by myself, but I am…

Downloads
726
Likes
105
Rating
5
P
Printablesgiufini

PCB Workstation with Nano-Probes

The PCB Workstation with Nano Probes is the best solution to work with electronic boards equipped with SMD components that are very small and hard to access for many of the most used laboratory test probes. UPDATED: Now you can buy the…

Downloads
724
Likes
200
Rating
4.67
P
Printables3D Printy

Customizable Rolodex - Works with Filament Swatch System (OpenSCAD)

This customizable Rolodex works with both regular Rolodex cards as well as filament swatches ! https://youtu.be/YvJMhSLk8PI https://youtu.be/Cnv59R2LXv0 How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based…

Downloads
720
Likes
216
Rating
4.88
P
Printablesvajonam

ryobi workshop blower nozzle

ryobi workshop blower nozzle, remixed to bit more gradual. I use to for blowing grass off my golf cart during early and late season rounds. print upright with no supports, should print fine, needs at least 160mm z height.

Downloads
719
Likes
84
Rating
5
P
PrintablesSangeriz

IPHONE 14 PRO - PRO MAX STAND "WORKS WITH CASE"

I have looked for many supports for my iPhone, but none that convinced me when it came to placing it vertically and horizontally, I also wanted to manipulate it by changing screens, but none allowed it, that's why I designed this model, I…

Downloads
709
Likes
29
Rating
4.75
P
PrintablesJustin Cross

Comic Book Display Stand. Works with Graded and Non Graded comics!

Comic Book Display Stand. Works with Graded and Non Graded comics!

Downloads
692
Likes
56
Rating
5
P
PrintablesNovaJump

Turbine Whistle Remix – Increased Rotor Spacing / Works right off the bed

Big thanks and compliments to the original designer! @StoererHauptquartier On my printer the Rotor fused and locked in place. Seems a pretty common issue. This remix opens the clearance by 50%. I printed this on MK4S 0.40 nozzle and 0.10…

Downloads
688
Likes
76
Rating
4.5
P
PrintablesJose H

Mini portable electronics workshop

Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…

Downloads
688
Likes
177
Rating
0
P
Printables3D MAGIC

Elf's workshop in a Christmas tree

A This ornament is a perfect blend of holiday tradition (the tree and nutcracker) and the magic of Santa's helpers , making it a fantastic addition to any Christmas tree or holiday display. Abusy scene from the North Pole inside the…

Downloads
681
Likes
131
Rating
0
P
PrintablesTJJohn12

Kyber Crystal and Container (Savi's Workshop - Star Wars)

Revised Models Now Available https://www.printables.com/model/483882-kyber-crystals-and-container-inspired-by-star-wars ----------- "What you see here may look like old junk... but let me assure you… some of it is new junk. We do this to…

Downloads
649
Likes
63
Rating
4.67
P
PrintablesPeterH1500

63mm / 2½" Truncated Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 30 Sep 25 Michael Bohrer ( MichaelBohre_2970532 ) commented that he had broken this design because parts of it were too thin. On investigation, I agree that the outer edge of the connecting tube is thinner than I intended. I've…

Downloads
636
Likes
81
Rating
5
P
PrintablesBoo_Ray

Marlin firmware for stock kp3s (the only one that works for me without problem)

Kp3s is a lovely printer but it is alarming how bad the firmwares found on the internet are - even the one from official website.. So I have decided to upload this marlin config for kp3s v3.. Because every config found on the internet is…

Downloads
634
Likes
29
Rating
0
P
PrintablesGeorge42rus

Parametric Skadis Panel (Solidworks)

To change you need to use Solidworks 2022 or later

Downloads
626
Likes
271
Rating
1
P
PrintablesBrian Flores

Aruba Networks AX Ceiling Mount Bracket AP-515 AP-MNT-MP10-E

(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them! Just wanted to share…

Downloads
611
Likes
18
Rating
5
P
Printablesippe

Ryobi Workshop blower adaptor

The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all…

Downloads
604
Likes
100
Rating
5
P
Printables75echo

RC Worksite portable toilet for diorama 1/16, 1/14 ,1/12,1/10

No supports nedded .scale in your slicer to suit your needs,100% is 1/14 scale

Downloads
585
Likes
102
Rating
5
P
PrintablesIan Foulds

French Cleat Workshop Peg Hanger

This is just a simple peg hook for a ½" French cleat system. Simple but useful. I printed with a 0.8mm nozzle in PLA with supports. Easily holds a hammer or 4' level. etc. I haven't pushed them to their limits yet. I suggest printing on…

Downloads
572
Likes
129
Rating
4.8
P
PrintablesMeister Edel

Toroidal Fan Attachment 4 Workshop/ Cordless Screwdriver

t teztt Heyho :D ---------- Short Youtube Video --------- Still messing up a little with the Toroidal propeller I designed for my Kids flying propeller :) Here is a version to mount on your drill. I see the following areas of application…

Downloads
572
Likes
137
Rating
4.83
P
Printablesgiufini

PCB Workstation Kit V1 with Needle Probes

The PCB Workstation Kit V1 with Needle Probes is the ideal tool for hobby or professional work on small or medium sized electronic boards (PCB width from 10 to 156 mm). UPDATED: Now you can buy the much improved 2024 V2 kits at…

Downloads
566
Likes
79
Rating
0
P
PrintablesBamBam Design

Kids Workspace - Activity Board for Desk and Wall

Kids Workspace - Screwboard for Desk and Wall Designed for the next Maker Generation! 👦👧 A very nice toy for child's where they could practice to use different tools for different screws. Use the included mount for the wall, you can…

Downloads
566
Likes
224
Rating
4.86
P
PrintablesThingsByTheBook

Savi's workshop lightsaber wall mount

Wall mount for lightsabers built at Savi's Workshop. Designed to fit both of my son's lightsabers well. One of theirs has the belt clip knob and the other does not. Mount the ring about 3/4 of the way up the blade to make it easy to slip…

Downloads
566
Likes
69
Rating
5

Bladeless PC Noctua 120mm Fan for Workshop, Desk, and Bedside Use

WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…

Downloads
550
Likes
168
Rating
5