Xreal Air2 Shade
This shade for the Xreal Air2 AR glasses gives improved darkness over the ones supplied by Xreal.
- Downloads
- 895
- Likes
- 63
- Rating
- 4.33
50 models
This shade for the Xreal Air2 AR glasses gives improved darkness over the ones supplied by Xreal.
On newer models of Xreal glasses, shades to block light coming from below are not included. Since I couldn’t find any existing solution, I decided to create one myself. This model replaces the original Xreal One (Koleido) frame and does…
My first upload (wooh!) I got these awesome new XReal One Pro glasses - basically a wearable monitor. The screen pass through is great for walking around, but when using them for movies, it felt like something was missing. I recommend…
Eine c10 karosse für ein exreal chassis. kann auch für andere Rahmen verwendet werden. original version: https://3dwarehouse.sketchup.com/model/25627aff4197b7b2868c4d0955275407/1971-Chevy-C10?hl=sv Support thread:…
I have designed flaps for Xreal Air Glasses to boost audio of glasses, since these glasses have really low audio volume. There are two models. Nreal_SPK_TPU: for printing with TPU/TPE filament (its slide in design, care must be taken on…
Since FPV drones and goggles are pretty much illegal everywhere in Australia (unless you want a lot of forms and undisclosed fees) I made this cover so I can use my Xreal outside to fly FPV but still able to keep LOS to keep it legalish ……
I wanted a hard case for my XReal One Pro's that also held their hub and an adapter I like to use. I lined the outer part of the inner with felt to reduce the rubbing sound. The felt is not really option because its inlaid to fit better.…
I'm so much happy with XReal Glasses - starting with the first version I bought 2 years ago, and now - XReal OnePro - BUT I hate the nose - it is simply unconfortable :( So - here comes - version 1. I'm still working on it, yet, you are…
Prints with no supports if your printer is tuned. Uses (4x) 6x3mm magnets.
Update: The original didn't survive well on their first trip, so I have reworked the design to make them more durable. I have also fine-tuned the fit, and improved the aesthetics. These shades are contoured to snap on over the front of…
I wanted to make a protective case, and eventually belt-clip to hold the XReal Beam to my waist. I measured the Beam, and built a case around it. Next step is to add a clip to mount it to the belt or waist-band of your pants. I also…
Got fed up waiting for Xreal to release proper light blockers for the One Pro glasses and will be using them on a sun holiday next month so made my own. I printed mine in PP filament and needed to scale them up to 102% to get a good fit,…
The storage case that comes with the xReal / nReal Air glasses is actually pretty nice for travel. I didn't like that I had to fold in the arms though - as I'm sure the wires in those hinges will eventually fail with repeated bending. I…
This model replaces the original Xreal One (Koleido) frame. Printing Recommendation: Use PETG as it’s less brittle and more flexible than PLA, making it a better choice for this part. There is a version that blocks light coming from…
Storage box for XReal Air XR glasses, XReal Beam and XReal Beam Pro, with a snap lid and compartments for: XReal Air Glasses with Light Shield XReal Beam Accessory XReal Beam Pro Accessory USB Cable Spare Lenses Nose Pad Separator Whilst…
This is a basic holder for the travel case that comes with the Xreal Air 2 AR glasses , intended for use with the Ikea SKADIS pegboard. (I can't find any information about the Nreal/Xreal Air travel case, so I don't know if this holder…
My Xreal One Pros were at a bad angle, I noticed it was because the “ear grooves” in the arms were too deep, so I made some stands that can stand it up higher. Then I noticed that the glasses slowly slid down my nose like all glasses tend…
Upgraded from a pair of XREAL Air 2 Pros to the XREAL One, but already had a prescription lens made from HONSVR, and didn't want to buy another or wait a few weeks. Found some from a site called InfinityOne, but their shipping times and…
Scan and reference model of an Xreal Beam pro for reference
Simplyfied riser with two PC4-M10 connectors on the backside. Filament rolls not rised. No screws needed. No supports needed. 2 parts. 100% infill PETG is recommended ------------ Part 1 v1.3 modified 3mm more lenght connectors a bit…
This is a stand for a Flextail Max-Repel S (mosquito repellent system). The Max repel S heats 2 chemical mats to release repellent. Although it is intended for static as well as wearable use, the heater is not stable unless one side of…
Note - if you have the XReal Beam Pro, see XReal Air + Beam + Beam Pro Storage Box Storage box for XReal Air XR glasses and XReal Beam accessory, with a snap lid and compartments for: XReal Air Glasses with Light Shield XReal Beam…
Each arm (temple) of the XREAL Air 2 has two speaker openings, for a total of four outlets across the device. Remixed to accommodate the top speaker opening on each ear. To mirror the STL file for the other ear, import it into a 3D slicer…
Front cover frame for Xreal One glasses to give that Shutter Shades look. Simple model that probably needs some tweaking to look perfect. Testprints show that the model prints best vertically. this because of the slight concaveness of the…
These braces are designed to reinforce the arms of the Nreal/Xreal Air glasses at the hinge where they often crack. My left arm developed a crack in the plastic and was dangerously close to falling off entirely, and these were able to…
This modular reel uses a common base with two “finger” options, to accommodate small cords and cables up to larger items, like air hoses and shop vac hoses. Both finger styles use the same base and hardware, allowing either style to be…
Nubia Redmagic dock and xreal beam enclouse for steam deck or any other handheld or device printed with petg
Just added a second hole for a magnet, should fit, but might have tight clearances.
G-Code na Flexi Rexe připravený rovnou k tisku
HCSW holder for xreal beam
Wanted some longer nose pads for my XReal One Pro so I decided to give it a shot. Printing Instructions Printer must be able to deliver proper print accuracy due to the small gaps required. Suprisingly I used PETG for my prints and it…
a simple bracket/mount for the Xream Beam Pro camera in two versions: a two and three pin
this is my first real design to make a “small” package of 2 devices, 1 is the xreal beam and the other is a USB C power and data splitter I attached an existing design from Jsaux mod case as an easy-to-attach mod. please feel welcome to…
Printed in PETG with .4mm nozzle at .2mm layer height. No supports needed. I wanted a way to pack and carry my Xreal AR glasses and accessories easily and in a small pack. I've been really happy with my Alpaka Modular Sling V2 for…
TPU 100% INFILL
Vertical Desk stand for the Xreal One Case. Also fits the Xreal Pro Air 2 case but it is a little tight so you may want to scale up a few percent.
Nice case! I needed some changes... I mostly modified the original parts inside the PrusaSlicer. So if you need to change the changes (like bigger holes, etc) you can make it directly as 3mf files are provided.
Using a right angle USB C magnetic connector (Cable CC), this stand will charge your xReal phone. Easy to remove and replace the phone. You need to insert the connector into the front part, and screw using a M3x20 screw to the stand…
I wanted an attachement that I could use with my XREXS Vacuum that I purchased so I could vacuum out the air in the resealable bags after putting some silica in there. I live where there isn't a lot of humidity so I primarily use this for…
Print with 0.24 layer, 7 walls and supports on out of a durable material, i recommend at least PETG, printed mine out of PBT-GF the mount uses the original screw and nut from the turn light mount pictured bellow Instalation unscrew the…
This version adapts the original FlexReel design to the SKÅDIS mounting pattern while retaining the interchangeable reel arms and spring-loaded folding mechanism. Use a pair of FlexReels, spaced to suit your needs, to organize extension…
A very spesific remix for myself. But if any one needs... P.S. you have to mirror the deltaFix_A_Rmx.stl file for the second part Category: 3D Printer Parts
I made this as a companion piece for UnimatrixReds's Discovery Phaser stand. He made a cool version of the Programmable matter cuff link that served as a holster, but not a way to display it, so I decided to make my own. I have two…
Nice case! I needed some changes... I mostly modified the original parts inside the PrusaSlicer. So if you need to change the changes (like bigger holes, etc) you can make it directly as 3mf files are provided.
Each arm (temple) of the XREAL Air 2 has two speaker openings, for a total of four outlets across the device. Remixed to accommodate the top speaker opening on each ear. To mirror the STL file for the other ear, import it into a 3D slicer…
Simplyfied riser with two PC4-M10 connectors on the backside. Filament rolls not rised. No screws needed. No supports needed. 2 parts. 100% infill PETG is recommended ------------ Part 1 v1.3 modified 3mm more lenght connectors a bit…
Block out the majority of back reflections and clip on over your XReal Air or Air 2 glasses. They are designed to fit within your peripheral vision cone - so you don't lose any peripheral sight. Love your Xreal glasses but hate seeing the…