XYZ Test Cube 20mm
A test cube with measurements of 20mmx20mm
- Downloads
- 33,008
- Likes
- 1,234
- Rating
- 4.96
1,604 models
A test cube with measurements of 20mmx20mm
Just your average XYZ cube with a few extras.
Visualization of the XYZ coordinate system A model created to orient XZY coordinates when setting up fixtures. Magnets are inserted into the model for better placement. Printing: Material: PETG Perimeter 2 Fill Gyroid 15% Layer height 0.2…
1/5/2020 - Added 8mm channel version. Added a version to clip onto the BEAR upgrade extrusion. 9/11/2020 - Added Right Hand version per comment request. (Works for MK3S and the Mini.) I decide to do my own spin on Gabe's awesome cam…
Visualization of the XYZ coordinate system, including rotation of the FANUC/ABB robot axes A model created to help you orient your robot in XZY coordinates and rotate. Magnets are inserted into the model for better placement. Printing:…
Visualization of the XYZ coordinate system, including rotation of the KUKA robot axes A model created to help you orient your robot in XZY coordinates and rotate. Magnets are inserted into the model for better placement. Printing:…
The official model of the Yellow King from DayZ. Pre-sliced G-codes with organic supports If you own the Original Prusa i3 MK3S+ or the Original Prusa MINI+, you can use the pre-sliced files, which take advantage of PrusaSlicer's organic…
25*25*25mm calibration cube for XYZ axes
Quick and easy print (~1hr), no supports. I designed this with the mindset that the Wyze Cam v3 has a nice ledge along the bottom that's perfect for ‘locking’ the camera in place if one installs it upside down. I printed the first 1mm in…
Like many of you I also have a lot of the great xyz cubes lying around. What do you do with it? My idea was CAS my xyz-cube cargo ship. Since I have, as already written, many cubes, I still had the idea of a modular transport ship. Get…
Structural Einsy Case Active Cooling for Einsy RAMBo Screws M3 Length 10 mm (same as PrusaEinsy Case) Screws M5 Length 12mm (2x) Door with mount for Noctua NF-A4x10 5V 40x10mm Fan Shroud that reaches out to edge of enclosure Noctua Fan…
A very quick and easy print that can be stuck to a glass to hold your Wyze Cam v2 against the glass. Spaces in print for 3m sticky tape. Camera wedges into the square hole. Scale up or down as needed to make fit firmer or looser. Based on…
Using Prusa Slicer negative volumns.
UA Coat of arms, larger version, check dimmension pictures for exact dimmension of file, on the emblem is used small filet to enhance plastic effect. Scaling in slicer should work well also. Color change happening in 6,20 height, included…
This housing will snap together over a Wyze camera and allow the USB power plug to be connected to the back. The interface features of the base were made larger than shown in the photos to prevent stress in those areas. Print instructions…
I went to print Frankincell's wyze cam mount and found that it sort of fillets up a bit from the bed which means overhangs that are hard to print. I literally just sliced off the bottom couple mm of the object so it's flat. No supports…
English XYZ axis + ABC rotation The rotation rings ABC are mobile. Check that the rings can rotate easily before gluing the axes in position. Do not hesitate to adjust the bushings before assembly. CHECK THE DIRECTION OF THE BUSHES BEFORE…
Have fun with painting :)
Quick and dirty Wyze V2 camera mount for the back of my Single Head Prusa XL. Works great! Check out my other XL Wyze mount that's compatible with multi-head versions and the EnXlosure!
I redesigned my Wyze Cam V3 Lack Enclosure Mount to address several issues: Improve magnetic stability Provide optional M3 screw mount Provide relief for the rubber feet Match Wyze Cam V3 base corner radii Provide MOAR options! There are…
Die modellierten Bauteile dienen als Ersatz der Spiegeldichtungen, wenn man Spiegel an den Lenkrädern Montiert hat und die Standartmäsigen Spiegel abmontiert. Der Ersatz wurde an einer Yamaha YZF-R 125 Baujahr 2023 montiert und sieht sehr…
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
I found the 25 mm length x 15 mm width best adapted. Printed in blue and yellow PLA without MMU. Used to fix a brokken zipper. A nice way to show support to Ukraine ! Imprimé en PLA bleu et jaune sans MMU, aux dimensions 25 x 15 mm pour…
Hello, Today I have for you a Keg for pouring drinks into 4 glasses . It is the highlight of every party! Automatically divides drinks into 4 glasses. Absolutely amazing! Interesting appearance. For proper functionality, you need to use a…
"Enjoyed this? Tap Like, give us a follow, and check out the rest of our models—there’s lots more to discover!"
Házecí kostka na fyzikální veličiny - délka, hmotnost, čas, teplota, objem, síla
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Bargraph Panel for TIPA PT041 - Audio Spectrum Analyzer . Holder for 80 LEDs in size 2 x 5 mm. Nothing special, but it might come in handy. :)
Házecí kostka na fyzikální veličiny - práce, výkon, energie
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Žáci si vyrobí herní pomůcku k zapamatování fyzikálních veličin - jejich názvů, značek a jednotek. Původně všichni žáci vyrábějí trojpexeso, ti pokročilí pak vytvořené kartičky upraví do tvaru puzzle.
I had an issue of 1) tape coming off from the rain, and 2) the sensor getting ruined from the rain. So this model already helped with the first issue but not the 2nd, so I added a block to do just that. Happy Printing!!
Žáci vyšších ročníků vytvoří didaktickou pomůcku pro mladší ročníky za účelem snadnějšího zapamatování základních fyzikálních vztahů.
Vytvoření pomůcek pro podporu výuky v předmětech: Přírodopis, Matematika , Fyzika , Zeměpis, Chemie, TV/Sport, Pracovní činnosti Využití 3D tisku ve spojení s výukou informatiky/ pracovních činnos
Bo-Katan Kryze Mandalorian Helmet.
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. Print instructions Rafts: No Supports: No Resolution: Infill: 15 Filament_brand: Filament_color: Filament_material:
XYZ Callibration Cube 20x20x20 Created long time ago with help of tutorial below but i used F360 instead: https://www.idig3dprinting.co.uk/news/how-to-guides/create-a-3d-printer-calibration-cube-in-freecad/
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Just a simple cube for downloading and modifying.
XYZ Calibration Cube 20x20x20mm
iDig3Dprinting Calibration Cube < link >
This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…
Introduction In case you are not familiar with why hexagons are mathematically and scientifically the bestagons, please first familiarise yourself by watching this video: And with that out of the way, here is another unnecessarily…
[Update] 15/08/2024: Added a 150mm version. Didn't do a bigger version as most calipers don't go over 150mm. Test how your printer renders 3D models dimensions. Helps to know how to scale your prints to stay true to the model. Print with…
Why YZ Case ? I wanted to create a Bear Upgrade, at no cost... once the Power Supply was removed, (Keeping it out of the heated enclosure) I needed a bracket to tie together the missing structure that the Power Supply provided. The YZ…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Just a CPU protection tray for AMD Ryzen AM4 CPU's Good for storage or shipping! Print Settings Layer height: 0.15mm - 0.20mm Support: None
XYZ Cube Calibration to check axis. Make the print using your real configuration to get max of the details and analysis
Calibration test-cube for 3D printers X, Y & Z written on the axis. ////////////////////////////////////////////////////////////////////////////////////////////// Note that I recommend calibrating the extruder before proceeding with this…
8 sizes of display shelves for your Honeycomb Storage Wall. The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it's probably not a good idea to use low…
Hi! I have made free-standing HSW walls before using these foot pieces that attach to any wall but I wanted something more sturdy and more built-for-purpose and this is what I came up with. Enjoy! Print setting recommendations Print the…
I couldn't find any free models that I liked of the famous Neuralyzer memory wiping device from the Men In Black film franchise, so I made my own. It's nearly accurate in size and appearance to the on-screen version that does not have the…
Just a other calibration Cube for your use. Dimensions are 20mm x 20mm x 20mm Print instructions Unassociated tags: würfel Category: 3D Printing
What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller…
Don't waste your precious time and filament printing a so called “calibration cube”! This quick print provides clues for all the important features and settings: Extrusion width E-steps / rotation distance (X, Y, Z) Bridging Cooling…
Wanted a testing cube where i could see which side was +x and -x etc. because i always forget to mark this on my test prints. The side with X0 has the X emdedded, the X+ side has it outside. Same with Y. Also a little overhang test on the…
The Ultimate XYZ and Mini-Benchy Printer Test This combined test print has the same dimensions as a common XYZ cube. It's one of the more challenging prints ;-) Printing Recommendations: 0.1-0.16 mm layer height, no supports needed, 15 %…
Introduction I designed these as I've had a few requests for bowls after I released the “HSW round shelves” model. You don't need a HSW (Honeycomb Storage Wall) to use them as they have flat bottoms. The size denoted is the widest part…
Dear Zach Freedman, if you are reading this, I plunged into 3D printing after watching your videos, thank you for the inspiration! Introduction Here is another unnecessarily over-engineered project! I am just going to design with screws…
The little white release button on my son's stroller broke, so I designed this replacement. The original is ABS, so you should print in ABS or ASA. Also, for some reason, it turned out a tad bit small for me, so I might recommend scaling…
The camera mount is aligned to see the nozzle close up even when doing a nozzle wipe and calibration. This is the best current option for the Kobra 2 Series printers uses external Wyze App. Does Not work with Anycubic App. The reason this…
Calibration cube with a city on the inside. There is a lot of fine details to test your printer. Mine just looked like some spikes in a cube. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: Doesn't Matter Supports: No…
This easy-to-read calibration cube helps you quickly check whether your printer is printing the correct size, in the correct direction, and with good quality — all in one short print. The model includes clear X, Y, and Z letters in two…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
Test de calibración, no usar soportes
Just for fun:) Imported from Thingiverse Print Settings Printer: Ender-3 V2 Neo Rafts: No Supports: No Resolution: Doesn't matter Infill: Doesn't matter Category: 3D Printing Tests
After upgrading my P1P to a P1S I found my previous mount for my WyzeCam would no longer be useful. This solution enables you to still monitor your prints without worrying about opening or closing the door depending on the material being…
Introduction This is used as a replacement base for this display stand - please go to this model page for general information. Compatible with standard (42mm) Gridfinity modules. Uses the same TPE/TPU feet as the original display stand.…
use this as your first test print to calibrate your printer
This a quick XYZ Calibration cube. Please like and make.
Wyze Cam mount for the Prusa. Hope you all enjoy :) I've added .step and .f3d files so that you may edit the design to your hearts delight. (I wish this was more encouraged since .stl files are a pain to edit well.) Print instructions…
This is a 20x20x20mm calibration cube. This cube is pluggable. Original part : https://www.thingiverse.com/thing:4075479
I very often use an XYZ calibration cube, but after checking the surface and measuring the dimensions, it became a waste. So from now on I will use this D6 dice as a calibration cube. Figure 6 is Z-shaped, the X-axis is 5 and the Y-axis…
This is a WYZE camera mount. It was made for the v2 camera but works with the v3 as well (shown above). This design currently only works without an enclosure mod but a pegboard and armor plate versions are in the making! Patreon (For…
Two models in dual color of calibration cubes of 20 by 20 mm. One simple twisted and another double twisted You might also like this dual color model Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank…
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. To further calibrate your 3D printer print one out and you can then measure this models dimensions against the expected dimensions. Once this is…
I had a Wyze cam facing my entry but it wasn't lined up correctly when against the glass. If I angled it away I got bad glare during the day and reflections at night. I made these mounts and they have worked well for me, 10 and 20 degree…
A simple 20mm calibration cube designed to test dimensional accuracy on the X, Y, and Z axes. Perfect for quick printer tuning and checking your machine’s precision. Easy to print with no supports needed.
Introduction Soon after the release of the KYZ HSW Display Stand , many requests were made for a height extension to increase the storage area. This adds two sizes of extensions: 7 hex extension for an 165mm height increase 9 hex…
This 10 mm XYZ calibration cube is a fast and reliable dimensional test for any FDM 3D printer. Each side is exactly 10 × 10 × 10 mm , with clean and clearly marked X, Y, and Z faces, making it easy to diagnose which axis needs…
Oh yeah, I over-engineered the hell out of this one! I went through more than 12 iterations and I think this is going to be my final version. The main challenge was designing outer walls that print without a million retractions so I…
This is a very simple mount that makes it possible to mount a Wyze Cam V3 onto the glass lid of a Bambu Lab X1C or P1S. Background Since the Bambu Handy application on my phone seems to never want to load the P1S camera view (or takes…
Model originally created by me on Thingiverse at https://www.thingiverse.com/thing:6569380 Concept A window mount for WYZE CAM V3 and V4 (Standard and Pro models supported) Usage You will need to print: - [1x] WYZE Cam V3+ XX ° Angled…
The Wyze Cam V3 is an excellent, affordable little camera to monitor your printer, but it has one fatal flaw... focus distance! The camera comes with a fixed focus that's approximately 3 feet to infinity, which makes monitoring 3D prints…
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
Mini ITX Ryzen Case See Video Here: This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/55PxXyqRY3A This case will work exactly with a ASROCK Fatal1ty AB350 Gaming ITX Motherboard and the AMD Wraith Stealth…
I'd been wanting a camera to remotely monitor my AnkerMake M5C remotely for a while, so I created one. I have a lot of cheap, lightweight Wyze cameras and generally like them. It sits on the top of the right side gantry and supports: -…
This is a precision 40-mm-XYZ-calibration cube. With some angles, curves, overhangs, holes and much more. Try it and show me your results <3
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
Simple door mount for the Elegoo Centauri Carbon glass front door to hold the Wyze v4 camera. Allows remote monitoring of your print-in-progress on your phone via Wyze app, and if combined with a wifi smart outlet, eg Wyze wifi outlet,…
The built-in m5 camera is so low on the Z axis that it makes it very impractical for viewing initial layers. This clip allows you to put a wyze cam v3 (or v3 pro) on the left side gantry to observe your prints from a higher perspective.…
Introduction : This is a print in place object aimed at tackling the XYZ dimensional accuracy calibration. That's a mouthful! Basically… if you want to print functional objects like collector card holders, boxes, hinges, doors, gears……
I liked the idea of a printable window mount originally designed by TwoPunchakes, but I wanted a version that didn't require supports. I have therefore re-made this from scratch in Fusion 360, providing a design that encases the Wyze Cam…